CVE Feed

In the Linux kernel, the following vulnerability has been resolved: fs: init flags_valid before calling vfs_fileattr_get syzbot reported a uninit-value bug in [1]. Similar to the "*get" context where the kernel's internal file_kattr structure is initialized before calling vfs_fileattr_get(), we should use the same mechanism when using fa. [1] BUG: KMSAN: uninit-value in fuse_fileattr_get+0xeb4/0x1450 fs/fuse/ioctl.c:517 fuse_fileattr_get+0xeb4/0x1450 fs/fuse/ioctl.c:517 vfs_fileattr_get fs/file_attr.c:94 [inline] __do_sys_file_getattr fs/file_attr.c:416 [inline] Local variable fa.i created at: __do_sys_file_getattr fs/file_attr.c:380 [inline] __se_sys_file_getattr+0x8c/0xbd0 fs/file_attr.c:372

In the Linux kernel, the following vulnerability has been resolved: nfs: return EISDIR on nfs3_proc_create if d_alias is a dir If we found an alias through nfs3_do_create/nfs_add_or_obtain /d_splice_alias which happens to be a dir dentry, we don't return any error, and simply forget about this alias, but the original dentry we were adding and passed as parameter remains negative. This later causes an oops on nfs_atomic_open_v23/finish_open since we supply a negative dentry to do_dentry_open. This has been observed running lustre-racer, where dirs and files are created/removed concurrently with the same name and O_EXCL is not used to open files (frequent file redirection). While d_splice_alias typically returns a directory alias or NULL, we explicitly check d_is_dir() to ensure that we don't attempt to perform file operations (like finish_open) on a directory inode, which triggers the observed oops.

In the Linux kernel, the following vulnerability has been resolved: spi: rockchip-sfc: Fix double-free in remove() callback The driver uses devm_spi_register_controller() for registration, which automatically unregisters the controller via devm cleanup when the device is removed. The manual call to spi_unregister_controller() in the remove() callback can lead to a double-free. And to make sure controller is unregistered before DMA buffer is unmapped, switch to use spi_register_controller() in probe().

In the Linux kernel, the following vulnerability has been resolved: mctp: route: hold key->lock in mctp_flow_prepare_output() mctp_flow_prepare_output() checks key->dev and may call mctp_dev_set_key(), but it does not hold key->lock while doing so. mctp_dev_set_key() and mctp_dev_release_key() are annotated with __must_hold(&key->lock), so key->dev access is intended to be serialized by key->lock. The mctp_sendmsg() transmit path reaches mctp_flow_prepare_output() via mctp_local_output() -> mctp_dst_output() without holding key->lock, so the check-and-set sequence is racy. Example interleaving: CPU0 CPU1 ---- ---- mctp_flow_prepare_output(key, devA) if (!key->dev) // sees NULL mctp_flow_prepare_output( key, devB) if (!key->dev) // still NULL mctp_dev_set_key(devB, key) mctp_dev_hold(devB) key->dev = devB mctp_dev_set_key(devA, key) mctp_dev_hold(devA) key->dev = devA // overwrites devB Now both devA and devB references were acquired, but only the final key->dev value is tracked for release. One reference can be lost, causing a resource leak as mctp_dev_release_key() would only decrease the reference on one dev. Fix by taking key->lock around the key->dev check and mctp_dev_set_key() call.

In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Fix memory leak in xhci_disable_slot() xhci_alloc_command() allocates a command structure and, when the second argument is true, also allocates a completion structure. Currently, the error handling path in xhci_disable_slot() only frees the command structure using kfree(), causing the completion structure to leak. Use xhci_free_command() instead of kfree(). xhci_free_command() correctly frees both the command structure and the associated completion structure. Since the command structure is allocated with zero-initialization, command->in_ctx is NULL and will not be erroneously freed by xhci_free_command(). This bug was found using an experimental static analysis tool we are developing. The tool is based on the LLVM framework and is specifically designed to detect memory management issues. It is currently under active development and not yet publicly available, but we plan to open-source it after our research is published. The bug was originally detected on v6.13-rc1 using our static analysis tool, and we have verified that the issue persists in the latest mainline kernel. We performed build testing on x86_64 with allyesconfig using GCC=11.4.0. Since triggering these error paths in xhci_disable_slot() requires specific hardware conditions or abnormal state, we were unable to construct a test case to reliably trigger these specific error paths at runtime.

In the Linux kernel, the following vulnerability has been resolved: USB: usbtmc: Use usb_bulk_msg_killable() with user-specified timeouts The usbtmc driver accepts timeout values specified by the user in an ioctl command, and uses these timeouts for some usb_bulk_msg() calls. Since the user can specify arbitrarily long timeouts and usb_bulk_msg() uses unkillable waits, call usb_bulk_msg_killable() instead to avoid the possibility of the user hanging a kernel thread indefinitely.

In the Linux kernel, the following vulnerability has been resolved: usb: renesas_usbhs: fix use-after-free in ISR during device removal In usbhs_remove(), the driver frees resources (including the pipe array) while the interrupt handler (usbhs_interrupt) is still registered. If an interrupt fires after usbhs_pipe_remove() but before the driver is fully unbound, the ISR may access freed memory, causing a use-after-free. Fix this by calling devm_free_irq() before freeing resources. This ensures the interrupt handler is both disabled and synchronized (waits for any running ISR to complete) before usbhs_pipe_remove() is called.

In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus/q54sj108a2) fix stack overflow in debugfs read The q54sj108a2_debugfs_read function suffers from a stack buffer overflow due to incorrect arguments passed to bin2hex(). The function currently passes 'data' as the destination and 'data_char' as the source. Because bin2hex() converts each input byte into two hex characters, a 32-byte block read results in 64 bytes of output. Since 'data' is only 34 bytes (I2C_SMBUS_BLOCK_MAX + 2), this writes 30 bytes past the end of the buffer onto the stack. Additionally, the arguments were swapped: it was reading from the zero-initialized 'data_char' and writing to 'data', resulting in all-zero output regardless of the actual I2C read. Fix this by: 1. Expanding 'data_char' to 66 bytes to safely hold the hex output. 2. Correcting the bin2hex() argument order and using the actual read count. 3. Using a pointer to select the correct output buffer for the final simple_read_from_buffer call.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in smb_lazy_parent_lease_break_close() opinfo pointer obtained via rcu_dereference(fp->f_opinfo) is being accessed after rcu_read_unlock() has been called. This creates a race condition where the memory could be freed by a concurrent writer between the unlock and the subsequent pointer dereferences (opinfo->is_lease, etc.), leading to a use-after-free.

In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: properly validate the data in rtw_get_ie_ex() Just like in commit 154828bf9559 ("staging: rtl8723bs: fix out-of-bounds read in rtw_get_ie() parser"), we don't trust the data in the frame so we should check the length better before acting on it

In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix potential out-of-bounds read in rtw_restruct_wmm_ie The current code checks 'i + 5 < in_len' at the end of the if statement. However, it accesses 'in_ie[i + 5]' before that check, which can lead to an out-of-bounds read. Move the length check to the beginning of the conditional to ensure the index is within bounds before accessing the array.

In the Linux kernel, the following vulnerability has been resolved: nouveau/dpcd: return EBUSY for aux xfer if the device is asleep If we have runtime suspended, and userspace wants to use /dev/drm_dp_* then just tell it the device is busy instead of crashing in the GSP code. WARNING: CPU: 2 PID: 565741 at drivers/gpu/drm/nouveau/nvkm/subdev/gsp/rm/r535/rpc.c:164 r535_gsp_msgq_wait+0x9a/0xb0 [nouveau] CPU: 2 UID: 0 PID: 565741 Comm: fwupd Not tainted 6.18.10-200.fc43.x86_64 #1 PREEMPT(lazy) Hardware name: LENOVO 20QTS0PQ00/20QTS0PQ00, BIOS N2OET65W (1.52 ) 08/05/2024 RIP: 0010:r535_gsp_msgq_wait+0x9a/0xb0 [nouveau] This is a simple fix to get backported. We should probably engineer a proper power domain solution to wake up devices and keep them awake while fw updates are happening.

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_rndis: Protect RNDIS options with mutex The class/subclass/protocol options are suspectible to race conditions as they can be accessed concurrently through configfs. Use existing mutex to protect these options. This issue was identified during code inspection.

In the Linux kernel, the following vulnerability has been resolved: x86/kexec: Disable KCOV instrumentation after load_segments() The load_segments() function changes segment registers, invalidating GS base (which KCOV relies on for per-cpu data). When CONFIG_KCOV is enabled, any subsequent instrumented C code call (e.g. native_gdt_invalidate()) begins crashing the kernel in an endless loop. To reproduce the problem, it's sufficient to do kexec on a KCOV-instrumented kernel: $ kexec -l /boot/otherKernel $ kexec -e The real-world context for this problem is enabling crash dump collection in syzkaller. For this, the tool loads a panic kernel before fuzzing and then calls makedumpfile after the panic. This workflow requires both CONFIG_KEXEC and CONFIG_KCOV to be enabled simultaneously. Adding safeguards directly to the KCOV fast-path (__sanitizer_cov_trace_pc()) is also undesirable as it would introduce an extra performance overhead. Disabling instrumentation for the individual functions would be too fragile, so disable KCOV instrumentation for the entire machine_kexec_64.c and physaddr.c. If coverage-guided fuzzing ever needs these components in the future, other approaches should be considered. The problem is not relevant for 32 bit kernels as CONFIG_KCOV is not supported there. [ bp: Space out comment for better readability. ]

In the Linux kernel, the following vulnerability has been resolved: drm/panthor: fix for dma-fence safe access rules Commit 506aa8b02a8d6 ("dma-fence: Add safe access helpers and document the rules") details the dma-fence safe access rules. The most common culprit is that drm_sched_fence_get_timeline_name may race with group_free_queue.

In the Linux kernel, the following vulnerability has been resolved: Revert "arm64: zynqmp: Add an OP-TEE node to the device tree" This reverts commit 06d22ed6b6635b17551f386b50bb5aaff9b75fbe. OP-TEE logic in U-Boot automatically injects a reserved-memory node along with optee firmware node to kernel device tree. The injection logic is dependent on that there is no manually defined optee node. Having the node in zynqmp.dtsi effectively breaks OP-TEE's insertion of the reserved-memory node, causing memory access violations during runtime.

In the Linux kernel, the following vulnerability has been resolved: lib/crypto: chacha: Zeroize permuted_state before it leaves scope Since the ChaCha permutation is invertible, the local variable 'permuted_state' is sufficient to compute the original 'state', and thus the key, even after the permutation has been done. While the kernel is quite inconsistent about zeroizing secrets on the stack (and some prominent userspace crypto libraries don't bother at all since it's not guaranteed to work anyway), the kernel does try to do it as a best practice, especially in cases involving the RNG. Thus, explicitly zeroize 'permuted_state' before it goes out of scope.

In the Linux kernel, the following vulnerability has been resolved: sched_ext: Fix SCX_KICK_WAIT deadlock by deferring wait to balance callback SCX_KICK_WAIT busy-waits in kick_cpus_irq_workfn() using smp_cond_load_acquire() until the target CPU's kick_sync advances. Because the irq_work runs in hardirq context, the waiting CPU cannot reschedule and its own kick_sync never advances. If multiple CPUs form a wait cycle, all CPUs deadlock. Replace the busy-wait in kick_cpus_irq_workfn() with resched_curr() to force the CPU through do_pick_task_scx(), which queues a balance callback to perform the wait. The balance callback drops the rq lock and enables IRQs following the sched_core_balance() pattern, so the CPU can process IPIs while waiting. The local CPU's kick_sync is advanced on entry to do_pick_task_scx() and continuously during the wait, ensuring any CPU that starts waiting for us sees the advancement and cannot form cyclic dependencies.

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: Eagerly init vgic dist/redist on vgic creation If vgic_allocate_private_irqs_locked() fails for any odd reason, we exit kvm_vgic_create() early, leaving dist->rd_regions uninitialised. kvm_vgic_dist_destroy() then comes along and walks into the weeds trying to free the RDs. Got to love this stuff. Solve it by moving all the static initialisation early, and make sure that if we fail halfway, we're in a reasonable shape to perform the rest of the teardown. While at it, reset the vgic model on failure, just in case...

In the Linux kernel, the following vulnerability has been resolved: mshv_vtl: Fix vmemmap_shift exceeding MAX_FOLIO_ORDER When registering VTL0 memory via MSHV_ADD_VTL0_MEMORY, the kernel computes pgmap->vmemmap_shift as the number of trailing zeros in the OR of start_pfn and last_pfn, intending to use the largest compound page order both endpoints are aligned to. However, this value is not clamped to MAX_FOLIO_ORDER, so a sufficiently aligned range (e.g. physical range [0x800000000000, 0x800080000000), corresponding to start_pfn=0x800000000 with 35 trailing zeros) can produce a shift larger than what memremap_pages() accepts, triggering a WARN and returning -EINVAL: WARNING: ... memremap_pages+0x512/0x650 requested folio size unsupported The MAX_FOLIO_ORDER check was added by commit 646b67d57589 ("mm/memremap: reject unreasonable folio/compound page sizes in memremap_pages()"). Fix this by clamping vmemmap_shift to MAX_FOLIO_ORDER so we always request the largest order the kernel supports, in those cases, rather than an out-of-range value. Also fix the error path to propagate the actual error code from devm_memremap_pages() instead of hard-coding -EFAULT, which was masking the real -EINVAL return.

In the Linux kernel, the following vulnerability has been resolved: bpf: reject direct access to nullable PTR_TO_BUF pointers check_mem_access() matches PTR_TO_BUF via base_type() which strips PTR_MAYBE_NULL, allowing direct dereference without a null check. Map iterator ctx->key and ctx->value are PTR_TO_BUF | PTR_MAYBE_NULL. On stop callbacks these are NULL, causing a kernel NULL dereference. Add a type_may_be_null() guard to the PTR_TO_BUF branch, matching the existing PTR_TO_BTF_ID pattern.

In the Linux kernel, the following vulnerability has been resolved: interconnect: qcom: sm8450: Fix NULL pointer dereference in icc_link_nodes() The change to dynamic IDs for SM8450 platform interconnects left two links unconverted, fix it to avoid the NULL pointer dereference in runtime, when a pointer to a destination interconnect is not valid: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 <...> Call trace: icc_link_nodes+0x3c/0x100 (P) qcom_icc_rpmh_probe+0x1b4/0x528 platform_probe+0x64/0xc0 really_probe+0xc4/0x2a8 __driver_probe_device+0x80/0x140 driver_probe_device+0x48/0x170 __device_attach_driver+0xc0/0x148 bus_for_each_drv+0x88/0xf0 __device_attach+0xb0/0x1c0 device_initial_probe+0x58/0x68 bus_probe_device+0x40/0xb8 deferred_probe_work_func+0x90/0xd0 process_one_work+0x15c/0x3c0 worker_thread+0x2e8/0x400 kthread+0x150/0x208 ret_from_fork+0x10/0x20 Code: 900310f4 911d6294 91008280 94176078 (f94002a0) ---[ end trace 0000000000000000 ]--- Kernel panic - not syncing: Oops: Fatal exception

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix sync handling in amdgpu_dma_buf_move_notify Invalidating a dmabuf will impact other users of the shared BO. In the scenario where process A moves the BO, it needs to inform process B about the move and process B will need to update its page table. The commit fixes a synchronisation bug caused by the use of the ticket: it made amdgpu_vm_handle_moved behave as if updating the page table immediately was correct but in this case it's not. An example is the following scenario, with 2 GPUs and glxgears running on GPU0 and Xorg running on GPU1, on a system where P2P PCI isn't supported: glxgears: export linear buffer from GPU0 and import using GPU1 submit frame rendering to GPU0 submit tiled->linear blit Xorg: copy of linear buffer The sequence of jobs would be: drm_sched_job_run # GPU0, frame rendering drm_sched_job_queue # GPU0, blit drm_sched_job_done # GPU0, frame rendering drm_sched_job_run # GPU0, blit move linear buffer for GPU1 access # amdgpu_dma_buf_move_notify -> update pt # GPU0 It this point the blit job on GPU0 is still running and would likely produce a page fault.

In the Linux kernel, the following vulnerability has been resolved: media: solo6x10: Check for out of bounds chip_id Clang with CONFIG_UBSAN_SHIFT=y noticed a condition where a signed type (literal "1" is an "int") could end up being shifted beyond 32 bits, so instrumentation was added (and due to the double is_tw286x() call seen via inlining), Clang decides the second one must now be undefined behavior and elides the rest of the function[1]. This is a known problem with Clang (that is still being worked on), but we can avoid the entire problem by actually checking the existing max chip ID, and now there is no runtime instrumentation added at all since everything is known to be within bounds. Additionally use an unsigned value for the shift to remove the instrumentation even without the explicit bounds checking. [hverkuil: fix checkpatch warning for is_tw286x]

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free by using call_rcu() for oplock_info ksmbd currently frees oplock_info immediately using kfree(), even though it is accessed under RCU read-side critical sections in places like opinfo_get() and proc_show_files(). Since there is no RCU grace period delay between nullifying the pointer and freeing the memory, a reader can still access oplock_info structure after it has been freed. This can leads to a use-after-free especially in opinfo_get() where atomic_inc_not_zero() is called on already freed memory. Fix this by switching to deferred freeing using call_rcu().

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix transaction abort on set received ioctl due to item overflow If the set received ioctl fails due to an item overflow when attempting to add the BTRFS_UUID_KEY_RECEIVED_SUBVOL we have to abort the transaction since we did some metadata updates before. This means that if a user calls this ioctl with the same received UUID field for a lot of subvolumes, we will hit the overflow, trigger the transaction abort and turn the filesystem into RO mode. A malicious user could exploit this, and this ioctl does not even requires that a user has admin privileges (CAP_SYS_ADMIN), only that he/she owns the subvolume. Fix this by doing an early check for item overflow before starting a transaction. This is also race safe because we are holding the subvol_sem semaphore in exclusive (write) mode. A test case for fstests will follow soon.

In the Linux kernel, the following vulnerability has been resolved: ublk: fix NULL pointer dereference in ublk_ctrl_set_size() ublk_ctrl_set_size() unconditionally dereferences ub->ub_disk via set_capacity_and_notify() without checking if it is NULL. ub->ub_disk is NULL before UBLK_CMD_START_DEV completes (it is only assigned in ublk_ctrl_start_dev()) and after UBLK_CMD_STOP_DEV runs (ublk_detach_disk() sets it to NULL). Since the UBLK_CMD_UPDATE_SIZE handler performs no state validation, a user can trigger a NULL pointer dereference by sending UPDATE_SIZE to a device that has been added but not yet started, or one that has been stopped. Fix this by checking ub->ub_disk under ub->mutex before dereferencing it, and returning -ENODEV if the disk is not available.

In the Linux kernel, the following vulnerability has been resolved: iio: gyro: mpu3050-core: fix pm_runtime error handling The return value of pm_runtime_get_sync() is not checked, allowing the driver to access hardware that may fail to resume. The device usage count is also unconditionally incremented. Use pm_runtime_resume_and_get() which propagates errors and avoids incrementing the usage count on failure. In preenable, add pm_runtime_put_autosuspend() on set_8khz_samplerate() failure since postdisable does not run when preenable fails.

In the Linux kernel, the following vulnerability has been resolved: ACPI: processor: Fix NULL-pointer dereference in acpi_processor_errata_piix4() In acpi_processor_errata_piix4(), the pointer dev is first assigned an IDE device and then reassigned an ISA device: dev = pci_get_subsys(..., PCI_DEVICE_ID_INTEL_82371AB, ...); dev = pci_get_subsys(..., PCI_DEVICE_ID_INTEL_82371AB_0, ...); If the first lookup succeeds but the second fails, dev becomes NULL. This leads to a potential null-pointer dereference when dev_dbg() is called: if (errata.piix4.bmisx) dev_dbg(&dev->dev, ...); To prevent this, use two temporary pointers and retrieve each device independently, avoiding overwriting dev with a possible NULL value. [ rjw: Subject adjustment, added an empty code line ]

In the Linux kernel, the following vulnerability has been resolved: media: chips-media: wave5: Fix PM runtime usage count underflow Replace pm_runtime_put_sync() with pm_runtime_dont_use_autosuspend() in the remove path to properly pair with pm_runtime_use_autosuspend() from probe. This allows pm_runtime_disable() to handle reference count cleanup correctly regardless of current suspend state. The driver calls pm_runtime_put_sync() unconditionally in remove, but the device may already be suspended due to autosuspend configured in probe. When autosuspend has already suspended the device, the usage count is 0, and pm_runtime_put_sync() decrements it to -1. This causes the following warning on module unload: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 963 at kernel/kthread.c:1430 kthread_destroy_worker+0x84/0x98 ... vdec 30210000.video-codec: Runtime PM usage count underflow!

In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: Workaround SQM/PSE stalls by disabling sticky NIX SQ manager sticky mode is known to cause stalls when multiple SQs share an SMQ and transmit concurrently. Additionally, PSE may deadlock on transitions between sticky and non-sticky transmissions. There is also a credit drop issue observed when certain condition clocks are gated. work around these hardware errata by: - Disabling SQM sticky operation: - Clear TM6 (bit 15) - Clear TM11 (bit 14) - Disabling sticky → non-sticky transition path that can deadlock PSE: - Clear TM5 (bit 23) - Preventing credit drops by keeping the control-flow clock enabled: - Set TM9 (bit 21) These changes are applied via NIX_AF_SQM_DBG_CTL_STATUS. With this configuration the SQM/PSE maintain forward progress under load without credit loss, at the cost of disabling sticky optimizations.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix transaction abort on file creation due to name hash collision If we attempt to create several files with names that result in the same hash, we have to pack them in same dir item and that has a limit inherent to the leaf size. However if we reach that limit, we trigger a transaction abort and turns the filesystem into RO mode. This allows for a malicious user to disrupt a system, without the need to have administration privileges/capabilities. Reproducer: $ cat exploit-hash-collisions.sh #!/bin/bash DEV=/dev/sdi MNT=/mnt/sdi # Use smallest node size to make the test faster and require fewer file # names that result in hash collision. mkfs.btrfs -f --nodesize 4K $DEV mount $DEV $MNT # List of names that result in the same crc32c hash for btrfs. declare -a names=( 'foobar' '%a8tYkxfGMLWRGr55QSeQc4PBNH9PCLIvR6jZnkDtUUru1t@RouaUe_L:@xGkbO3nCwvLNYeK9vhE628gss:T$yZjZ5l-Nbd6CbC$M=hqE-ujhJICXyIxBvYrIU9-TDC' 'AQci3EUB%shMsg-N%frgU:02ByLs=IPJU0OpgiWit5nexSyxZDncY6WB:=zKZuk5Zy0DD$Ua78%MelgBuMqaHGyKsJUFf9s=UW80PcJmKctb46KveLSiUtNmqrMiL9-Y0I_l5Fnam04CGIg=8@U:Z' 'CvVqJpJzueKcuA$wqwePfyu7VxuWNN3ho$p0zi2H8QFYK$7YlEqOhhb%:hHgjhIjW5vnqWHKNP4' 'ET:vk@rFU4tsvMB0$C_p=xQHaYZjvoF%-BTc%wkFW8yaDAPcCYoR%x$FH5O:' 'HwTon%v7SGSP4FE08jBwwiu5aot2CFKXHTeEAa@38fUcNGOWvE@Mz6WBeDH_VooaZ6AgsXPkVGwy9l@@ZbNXabUU9csiWrrOp0MWUdfi$EZ3w9GkIqtz7I_eOsByOkBOO' 'Ij%2VlFGXSuPvxJGf5UWy6O@1svxGha%b@=%wjkq:CIgE6u7eJOjmQY5qTtxE2Rjbis9@us' 'KBkjG5%9R8K9sOG8UTnAYjxLNAvBmvV5vz3IiZaPmKuLYO03-6asI9lJ_j4@6Xo$KZicaLWJ3Pv8XEwVeUPMwbHYWwbx0pYvNlGMO9F:ZhHAwyctnGy%_eujl%WPd4U2BI7qooOSr85J-C2V$LfY' 'NcRfDfuUQ2=zP8K3CCF5dFcpfiOm6mwenShsAb_F%n6GAGC7fT2JFFn:c35X-3aYwoq7jNX5$ZJ6hI3wnZs$7KgGi7wjulffhHNUxAT0fRRLF39vJ@NvaEMxsMO' 'Oj42AQAEzRoTxa5OuSKIr=A_lwGMy132v4g3Pdq1GvUG9874YseIFQ6QU' 'Ono7avN5GjC:_6dBJ_' 'WHmN2gnmaN-9dVDy4aWo:yNGFzz8qsJyJhWEWcud7$QzN2D9R0efIWWEdu5kwWr73NZm4=@CoCDxrrZnRITr-kGtU_cfW2:%2_am' 'WiFnuTEhAG9FEC6zopQmj-A-$LDQ0T3WULz%ox3UZAPybSV6v1Z$b4L_XBi4M4BMBtJZpz93r9xafpB77r:lbwvitWRyo$odnAUYlYMmU4RvgnNd--e=I5hiEjGLETTtaScWlQp8mYsBovZwM2k' 'XKyH=OsOAF3p%uziGF_ZVr$ivrvhVgD@1u%5RtrV-gl_vqAwHkK@x7YwlxX3qT6WKKQ%PR56NrUBU2dOAOAdzr2=5nJuKPM-T-$ZpQfCL7phxQbUcb:BZOTPaFExc-qK-gDRCDW2' 'd3uUR6OFEwZr%ns1XH_@tbxA@cCPmbBRLdyh7p6V45H$P2$F%w0RqrD3M0g8aGvWpoTFMiBdOTJXjD:JF7=h9a_43xBywYAP%r$SPZi%zDg%ql-KvkdUCtF9OLaQlxmd' 'ePTpbnit%hyNm@WELlpKzNZYOzOTf8EQ$sEfkMy1VOfIUu3coyvIr13-Y7Sv5v-Ivax2Go_GQRFMU1b3362nktT9WOJf3SpT%z8sZmM3gvYQBDgmKI%%RM-G7hyrhgYflOw%z::ZRcv5O:lDCFm' 'evqk743Y@dvZAiG5J05L_ROFV@$2%rVWJ2%3nxV72-W7$e$-SK3tuSHA2mBt$qloC5jwNx33GmQUjD%akhBPu=VJ5g$xhlZiaFtTrjeeM5x7dt4cHpX0cZkmfImndYzGmvwQG:$euFYmXn$_2rA9mKZ' 'gkgUtnihWXsZQTEkrMAWIxir09k3t7jk_IK25t1:cy1XWN0GGqC%FrySdcmU7M8MuPO_ppkLw3=Dfr0UuBAL4%GFk2$Ma10V1jDRGJje%Xx9EV2ERaWKtjpwiZwh0gCSJsj5UL7CR8RtW5opCVFKGGy8Cky' 'hNgsG_8lNRik3PvphqPm0yEH3P%%fYG:kQLY=6O-61Wa6nrV_WVGR6TLB09vHOv%g4VQRP8Gzx7VXUY1qvZyS' 'isA7JVzN12xCxVPJZ_qoLm-pTBuhjjHMvV7o=F:EaClfYNyFGlsfw-Kf%uxdqW-kwk1sPl2vhbjyHU1A6$hz' 'kiJ_fgcdZFDiOptjgH5PN9-PSyLO4fbk_:u5_2tz35lV_iXiJ6cx7pwjTtKy-XGaQ5IefmpJ4N_ZqGsqCsKuqOOBgf9LkUdffHet@Wu' 'lvwtxyhE9:%Q3UxeHiViUyNzJsy:fm38pg_b6s25JvdhOAT=1s0$pG25x=LZ2rlHTszj=gN6M4zHZYr_qrB49i=pA--@WqWLIuX7o1S_SfS@2FSiUZN' 'rC24cw3UBDZ=5qJBUMs9e$=S4Y94ni%Z8639vnrGp=0Hv4z3dNFL0fBLmQ40=EYIY:Z=SLc@QLMSt2zsss2ZXrP7j4=' 'uwGl2s-fFrf@GqS=DQqq2I0LJSsOmM%xzTjS:lzXguE3wChdMoHYtLRKPvfaPOZF2fER@j53evbKa7R%A7r4%YEkD=kicJe@SFiGtXHbKe4gCgPAYbnVn' 'UG37U6KKua2bgc:IHzRs7BnB6FD:2Mt5Cc5NdlsW%$1tyvnfz7S27FvNkroXwAW:mBZLA1@qa9WnDbHCDmQmfPMC9z-Eq6QT0jhhPpqyymaD:R02ghwYo%yx7SAaaq-:x33LYpei$5g8DMl3C' 'y2vjek0FE1PDJC0qpfnN:x8k2wCFZ9xiUF2ege=JnP98R%wxjKkdfEiLWvQzmnW' '8-HCSgH5B%K7P8_jaVtQhBXpBk:pE-$P7ts58U0J@iR9YZntMPl7j$s62yAJO@_9eanFPS54b=UTw$94C-t=HLxT8n6o9P=QnIxq-f1=Ne2dvhe6WbjEQtc' 'YPPh:IFt2mtR6XWSmjHptXL_hbSYu8bMw-JP8@PNyaFkdNFsk$M=xfL6LDKCDM-mSyGA_2MBwZ8Dr4=R1D%7-mC ---truncated---

In the Linux kernel, the following vulnerability has been resolved: media: uvcvideo: Return queued buffers on start_streaming() failure Return buffers if streaming fails to start due to uvc_pm_get() error. This bug may be responsible for a warning I got running while :; do yavta -c3 /dev/video0; done on an xHCI controller which failed under this workload. I had no luck reproducing this warning again to confirm. xhci_hcd 0000:09:00.0: HC died; cleaning up usb 13-2: USB disconnect, device number 2 WARNING: CPU: 2 PID: 29386 at drivers/media/common/videobuf2/videobuf2-core.c:1803 vb2_start_streaming+0xac/0x120

In the Linux kernel, the following vulnerability has been resolved: media: chips-media: wave5: Fix kthread worker destruction in polling mode Fix the cleanup order in polling mode (irq < 0) to prevent kernel warnings during module removal. Cancel the hrtimer before destroying the kthread worker to ensure work queues are empty. In polling mode, the driver uses hrtimer to periodically trigger wave5_vpu_timer_callback() which queues work via kthread_queue_work(). The kthread_destroy_worker() function validates that both work queues are empty with WARN_ON(!list_empty(&worker->work_list)) and WARN_ON(!list_empty(&worker->delayed_work_list)). The original code called kthread_destroy_worker() before hrtimer_cancel(), creating a race condition where the timer could fire during worker destruction and queue new work, triggering the WARN_ON. This causes the following warning on every module unload in polling mode: ------------[ cut here ]------------ WARNING: CPU: 2 PID: 1034 at kernel/kthread.c:1430 kthread_destroy_worker+0x84/0x98 Modules linked in: wave5(-) rpmsg_ctrl rpmsg_char ... Call trace: kthread_destroy_worker+0x84/0x98 wave5_vpu_remove+0xc8/0xe0 [wave5] platform_remove+0x30/0x58 ... ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: drm/tests: shmem: Hold reservation lock around purge Acquire and release the GEM object's reservation lock around calls to the object's purge operation. The tests use drm_gem_shmem_purge_locked(), which led to errors such as show below. [ 58.709128] WARNING: CPU: 1 PID: 1354 at drivers/gpu/drm/drm_gem_shmem_helper.c:515 drm_gem_shmem_purge_locked+0x51c/0x740 Only export the new helper drm_gem_shmem_purge() for Kunit tests. This is not an interface for regular drivers.

RayVentory Scan Engine through 12.6 Update 8 allows attackers to gain privileges if they control the value of the PATH environment variable. NOTE: this is disputed because ability of an attacker to control the environment is a site-specific misconfiguration.

Netgate pfSense CE 2.8.0 allows code execution in the XMLRPC API via pfsense.exec_php. NOTE: the Supplier disputes this because the API call is only available to admins and they are intentionally allowed to execute PHP code.

Alkacon OpenCms before 10.5.1 allows remote unauthenticated attackers to obtain sensitive information via a cmis-online/query XXE attack on a Chemistry servlet.

Alkacon OpenCms before 16 allows XXE when the <!DOCTYPE> refers to an external host.

Beauty Parlour Management System v1.1 was discovered to contain a SQL injection vulnerability via the aptnumber parameter in the /appointment-detail.php endpoint. This vulnerability allows attackers to access sensitive database information via a crafted SQL statement.

An issue was discovered in kosma minmea 0.3.0. The minmea_scan functions format specifier copies NMEA field data to a caller-provided buffer without a size parameter. Applications using minmea_scan on untrusted input are vulnerable to a stack buffer overflow.

Netgate pfSense CE 2.7.2 allows code execution by using the module installer with a backup file with a serialized PHP object containing the post_reboot_commands property. NOTE: the Supplier disputes this because this installer is only available to admins and they are intentionally allowed to execute PHP code.

A Command Injection issue in the payload build page in BYOB (Build Your Own Botnet) 2.0 allows attackers to execute arbitrary commands on the server via a crafted build parameter. This occurs in freeze in core/generators.py.

Mikrotik RouterOS (x86) 6.40.5 through 6.49.10 (fixed in 7) allows a remote attacker to cause a denial of service (device crash) via crafted packet data to the SMB service on TCP port 445.

The socket connection handler in aswArPot.sys in the Avast and AVG Windows Anti Rootkit driver before 22.1 allows local attackers to execute arbitrary code in kernel mode or cause a denial of service (memory corruption and OS crash) due to a double fetch vulnerability at aswArPot+0xbb94.

In the Linux kernel, the following vulnerability has been resolved: crypto: caam - fix overflow on long hmac keys When a key longer than block size is supplied, it is copied and then hashed into the real key. The memory allocated for the copy needs to be rounded to DMA cache alignment, as otherwise the hashed key may corrupt neighbouring memory. The copying is performed using kmemdup, however this leads to an overflow: reading more bytes (aligned_len - keylen) from the keylen source buffer. Fix this by replacing kmemdup with kmalloc, followed by memcpy.

In the Linux kernel, the following vulnerability has been resolved: spi: amlogic: spifc-a4: Fix DMA mapping error handling Fix three bugs in aml_sfc_dma_buffer_setup() error paths: 1. Unnecessary goto: When the first DMA mapping (sfc->daddr) fails, nothing needs cleanup. Use direct return instead of goto. 2. Double-unmap bug: When info DMA mapping failed, the code would unmap sfc->daddr inline, then fall through to out_map_data which would unmap it again, causing a double-unmap. 3. Wrong unmap size: The out_map_info label used datalen instead of infolen when unmapping sfc->iaddr, which could lead to incorrect DMA sync behavior.

In the Linux kernel, the following vulnerability has been resolved: net: Fix rcu_tasks stall in threaded busypoll I was debugging a NIC driver when I noticed that when I enable threaded busypoll, bpftrace hangs when starting up. dmesg showed: rcu_tasks_wait_gp: rcu_tasks grace period number 85 (since boot) is 10658 jiffies old. rcu_tasks_wait_gp: rcu_tasks grace period number 85 (since boot) is 40793 jiffies old. rcu_tasks_wait_gp: rcu_tasks grace period number 85 (since boot) is 131273 jiffies old. rcu_tasks_wait_gp: rcu_tasks grace period number 85 (since boot) is 402058 jiffies old. INFO: rcu_tasks detected stalls on tasks: 00000000769f52cd: .N nvcsw: 2/2 holdout: 1 idle_cpu: -1/64 task:napi/eth2-8265 state:R running task stack:0 pid:48300 tgid:48300 ppid:2 task_flags:0x208040 flags:0x00004000 Call Trace: <TASK> ? napi_threaded_poll_loop+0x27c/0x2c0 ? __pfx_napi_threaded_poll+0x10/0x10 ? napi_threaded_poll+0x26/0x80 ? kthread+0xfa/0x240 ? __pfx_kthread+0x10/0x10 ? ret_from_fork+0x31/0x50 ? __pfx_kthread+0x10/0x10 ? ret_from_fork_asm+0x1a/0x30 </TASK> The cause is that in threaded busypoll, the main loop is in napi_threaded_poll rather than napi_threaded_poll_loop, where the latter rarely iterates more than once within its loop. For rcu_softirq_qs_periodic inside napi_threaded_poll_loop to report its qs state, the last_qs must be 100ms behind, and this can't happen because napi_threaded_poll_loop rarely iterates in threaded busypoll, and each time napi_threaded_poll_loop is called last_qs is reset to latest jiffies. This patch changes so that in threaded busypoll, last_qs is saved in the outer napi_threaded_poll, and whether busy_poll_last_qs is NULL indicates whether napi_threaded_poll_loop is called for busypoll. This way last_qs would not reset to latest jiffies on each invocation of napi_threaded_poll_loop.

In the Linux kernel, the following vulnerability has been resolved: net/tcp-ao: Fix MAC comparison to be constant-time To prevent timing attacks, MACs need to be compared in constant time. Use the appropriate helper function for this.

In the Linux kernel, the following vulnerability has been resolved: arm64: dts: qcom: monaco: Reserve full Gunyah metadata region We observe spurious "Synchronous External Abort" exceptions (ESR=0x96000010) and kernel crashes on Monaco-based platforms. These faults are caused by the kernel inadvertently accessing hypervisor-owned memory that is not properly marked as reserved. >From boot log, The Qualcomm hypervisor reports the memory range at 0x91a80000 of size 0x80000 (512 KiB) as hypervisor-owned: qhee_hyp_assign_remove_memory: 0x91a80000/0x80000 -> ret 0 However, the EFI memory map provided by firmware only reserves the subrange 0x91a40000–0x91a87fff (288 KiB). The remaining portion (0x91a88000–0x91afffff) is incorrectly reported as conventional memory (from efi debug): efi: 0x000091a40000-0x000091a87fff [Reserved...] efi: 0x000091a88000-0x0000938fffff [Conventional...] As a result, the allocator may hand out PFNs inside the hypervisor owned region, causing fatal aborts when the kernel accesses those addresses. Add a reserved-memory carveout for the Gunyah hypervisor metadata at 0x91a80000 (512 KiB) and mark it as no-map so Linux does not map or allocate from this area. For the record: Hyp version: gunyah-e78adb36e debug (2025-11-17 05:38:05 UTC) UEFI Ver: 6.0.260122.BOOT.MXF.1.0.c1-00449-KODIAKLA-1