CVE Feed

The use of a broken or risky cryptographic algorithm was discovered in firmware version 3.60 of the Click Plus PLC. The vulnerability relies on the fact that the software uses an insecure implementation of the RSA encryption algorithm.

The use of a hard-coded cryptographic key was discovered in firmware version 3.60 of the Click Plus PLC. The vulnerability relies on the fact that the software contains a hard-coded AES key used to protect the initial messages of a new KOPS session.

Cleartext storage of sensitive information was discovered in Click Programming Software version v3.60. The vulnerability can be exploited by a local user with access to the file system, while an administrator session is active, to steal credentials stored in clear text.

Improper input validation in Satellite Management Controller (SMC) may allow an attacker with privileges to manipulate Redfish® API commands to remove files from the local root directory, potentially resulting in data corruption.

Improper input validation in Satellite Management Controller (SMC) may allow an attacker with privileges to use certain special characters in manipulated Redfish® API commands, causing service processes like OpenBMC to crash and reset, potentially resulting in denial of service.

Kata Containers is an open source project focusing on a standard implementation of lightweight Virtual Machines (VMs) that perform like containers. In Kata Containers versions from 3.20.0 and before, a malicious host can circumvent initdata verification. On TDX systems running confidential guests, a malicious host can selectively fail IO operations to skip initdata verification. This allows an attacker to launch arbitrary workloads while being able to attest successfully to Trustee impersonating any benign workload. This issue has been patched in Kata Containers version 3.21.0.

Flag Forge is a Capture The Flag (CTF) platform. In version 2.1.0, non-admin users can create arbitrary challenges, potentially introducing malicious, incorrect, or misleading content. This issue has been patched in version 2.2.0.

astral-tokio-tar is a tar archive reading/writing library for async Rust. In versions 0.5.3 and earlier of astral-tokio-tar, tar archives may extract outside of their intended destination directory when using the Entry::unpack_in_raw API. Additionally, the Entry::allow_external_symlinks control (which defaults to true) could be bypassed via a pair of symlinks that individually point within the destination but combine to point outside of it. These behaviors could be used individually or combined to bypass the intended security control of limiting extraction to the given directory. This in turn would allow an attacker with a malicious tar archive to perform an arbitrary file write and potentially pivot into code execution. This issue has been patched in version 0.5.4. There is no workaround other than upgrading.

Http4s is a Scala interface for HTTP services. In versions from 1.0.0-M1 to before 1.0.0-M45 and before 0.23.31, http4s is vulnerable to HTTP Request Smuggling due to improper handling of HTTP trailer section. This vulnerability could enable attackers to bypass front-end servers security controls, launch targeted attacks against active users, and poison web caches. A pre-requisite for exploitation involves the web application being deployed behind a reverse-proxy that forwards trailer headers. This issue has been patched in versions 1.0.0-M45 and 0.23.31.

Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in WordPress allows Stored XSS. WordPress core security team is aware of the issue and working on a fix. This is low severity vulnerability that requires an attacker to have Author or higher user privileges to execute the attack vector.This issue affects WordPress: from 6.8 through 6.8.2, from 6.7 through 6.7.3, from 6.6 through 6.6.3, from 6.5 through 6.5.6, from 6.4 through 6.4.6, from 6.3 through 6.3.6, from 6.2 through 6.2.7, from 6.1 through 6.1.8, from 6.0 through 6.0.10, from 5.9 through 5.9.11, from 5.8 through 5.8.11, from 5.7 through 5.7.13, from 5.6 through 5.6.15, from 5.5 through 5.5.16, from 5.4 through 5.4.17, from 5.3 through 5.3.19, from 5.2 through 5.2.22, from 5.1 through 5.1.20, from 5.0 through 5.0.23, from 4.9 through 4.9.27, from 4.8 through 4.8.26, from 4.7 through 4.7.30.

CryptoLib provides a software-only solution using the CCSDS Space Data Link Security Protocol - Extended Procedures (SDLS-EP) to secure communications between a spacecraft running the core Flight System (cFS) and a ground station. Prior to version 1.4.2, there is a command Injection vulnerability in initialize_kerberos_keytab_file_login(). The vulnerability exists because the code directly interpolates user-controlled input into a shell command and executes it via system() without any sanitization or validation. This issue has been patched in version 1.4.2.

Sunshine is a self-hosted game stream host for Moonlight. Prior to version 2025.923.33222, the Windows service SunshineService is installed with an unquoted executable path. If Sunshine is installed in a directory whose name includes a space, the Service Control Manager (SCM) interprets the path incrementally and may execute a malicious binary placed earlier in the search string. This issue has been patched in version 2025.923.33222.

DNN (formerly DotNetNuke) is an open-source web content management platform (CMS) in the Microsoft ecosystem. Prior to version 10.1.0, specially crafted URLs to the FileBrowser are vulnerable to javascript injection, affecting any unsuspecting user clicking such link. This issue has been patched in version 10.1.0.

DNN (formerly DotNetNuke) is an open-source web content management platform (CMS) in the Microsoft ecosystem. Prior to version 10.1.0, the CKEditor file upload endpoint has insufficient sanitization for filenames allowing probing network endpoints. A specially crafted request can be made to upload a file with Unicode characters, which would be translated into a path that could expose resources in the internal network of the hosted site. This issue has been patched in version 10.1.0.

Improper Input Validation vulnerability in TOTOLINK X6000R allows Flooding.This issue affects X6000R: through V9.4.0cu.1360_B20241207.

Use After Free vulnerability in RTI Connext Professional (Security Plugins) allows File Manipulation.This issue affects Connext Professional: from 7.5.0 before 7.6.0.

Untrusted Pointer Dereference vulnerability in RTI Connext Professional (Core Libraries) allows Pointer Manipulation.This issue affects Connext Professional: from 7.4.0 before 7.6.0, from 7.0.0 before 7.3.0.10, from 6.1.0 before 6.1.2.27, from 6.0.0 before 6.0.1.43, from 5.3.0 before 5.3.*, from 4.4a before 5.2.*.

Buffer Over-read, Off-by-one Error vulnerability in RTI Connext Professional (Core Libraries) allows File Manipulation, Overread Buffers.This issue affects Connext Professional: from 7.4.0 before 7.6.0, from 7.0.0 before 7.3.0.8, from 6.1.0 before 6.1.2.26, from 6.0.0 before 6.0.1.43, from 5.3.0 before 5.3.*, from 4.4a before 5.2.*.

Untrusted Pointer Dereference vulnerability in RTI Connext Professional (Core Libraries) allows Pointer Manipulation.This issue affects Connext Professional: from 7.4.0 before 7.6.0, from 7.2.0 before 7.3.0.9.

DNN (formerly DotNetNuke) is an open-source web content management platform (CMS) in the Microsoft ecosystem. Prior to version 10.1.0, DNN’s URL/path handling and template rendering can allow specially crafted input to be reflected into a user profile that is returned to the browser. In these cases, the application does not sufficiently neutralize or encode characters that are meaningful in HTML, so an attacker can cause a victim’s browser to interpret attacker-controlled content as part of the page’s HTML. This issue has been patched in version 10.1.0.

DNN (formerly DotNetNuke) is an open-source web content management platform (CMS) in the Microsoft ecosystem. Prior to version 10.1.0, administrators and content editors can set html in module titles that could include javascript which could be used for XSS based attacks. This issue has been patched in version 10.1.0.

DNN (formerly DotNetNuke) is an open-source web content management platform (CMS) in the Microsoft ecosystem. Prior to version 10.1.0, the Prompt module allows execution of commands that can return raw HTML. Malicious input, even if sanitized for display elsewhere, can be executed when processed through certain commands, leading to potential script execution (XSS). This issue has been patched in version 10.1.0.

DNN (formerly DotNetNuke) is an open-source web content management platform (CMS) in the Microsoft ecosystem. Prior to version 10.1.0, when embedding information in the Biography field, even if that field is not rich-text, users could inject javascript code that would run in the context of the website and to any other user that can view the profile including administrators and/or superusers. This issue has been patched in version 10.1.0.

An authentication bypass vulnerability exists in multiple WSO2 products when FIDO authentication is enabled. When a user account is deleted, the system does not automatically remove associated FIDO registration data. If a new user account is later created using the same username, the system may associate the new account with the previously registered FIDO device. This flaw may allow a previously deleted user to authenticate using their FIDO credentials and impersonate the newly created user, resulting in unauthorized access. The vulnerability applies only to deployments that utilize FIDO-based authentication.

Insertion of Sensitive Information Into Sent Data vulnerability in WordPress allows Retrieve Embedded Sensitive Data. The WordPress Core security team is aware of the issue and is already working on a fix. This is a low-severity vulnerability. Contributor-level privileges required in order to exploit it. This issue affects WordPress: from 6.8 through 6.8.2, from 6.7 through 6.7.3, from 6.6 through 6.6.3, from 6.5 through 6.5.6, from 6.4 through 6.4.6, from 6.3 through 6.3.6, from 6.2 through 6.2.7, from 6.1 through 6.1.8, from 6.0 through 6.0.10, from 5.9 through 5.9.11, from 5.8 through 5.8.11, from 5.7 through 5.7.13, from 5.6 through 5.6.15, from 5.5 through 5.5.16, from 5.4 through 5.4.17, from 5.3 through 5.3.19, from 5.2 through 5.2.22, from 5.1 through 5.1.20, from 5.0 through 5.0.23, from 4.9 through 4.9.27, from 4.8 through 4.8.26, from 4.7 through 4.7.30.

A reflected cross-site scripting (XSS) vulnerability exists in the account registration flow of WSO2 Identity Server due to improper output encoding. A malicious actor can exploit this vulnerability by injecting a crafted payload that is reflected in the server response, enabling the execution of arbitrary JavaScript in the victim's browser. This vulnerability could allow attackers to redirect users to malicious websites, modify the user interface, or exfiltrate data from the browser. However, session-related sensitive cookies are protected using the httpOnly flag, which mitigates the risk of session hijacking.

A cross-tenant authentication vulnerability exists in multiple WSO2 products due to improper cryptographic design in Adaptive Authentication. A single cryptographic key is used across all tenants to sign authentication cookies, allowing a privileged user in one tenant to forge authentication cookies for users in other tenants. Because the Auto-Login feature is enabled by default, this flaw may allow an attacker to gain unauthorized access and potentially take over accounts in other tenants. Successful exploitation requires access to Adaptive Authentication functionality, which is typically restricted to high-privileged users. The vulnerability is only exploitable when Auto-Login is enabled, reducing its practical impact in deployments where the feature is disabled.

Malicious code was inserted into the Nx (build system) package and several related plugins. The tampered package was published to the npm software registry, via a supply-chain attack. Affected versions contain code that scans the file system, collects credentials, and posts them to GitHub as a repo under user's accounts.

A content spoofing vulnerability exists in multiple WSO2 products due to improper error message handling. Under certain conditions, error messages are passed through URL parameters without validation, allowing malicious actors to inject arbitrary content into the UI. By exploiting this vulnerability, attackers can manipulate browser-displayed error messages, enabling social engineering attacks through deceptive or misleading content.

This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

An authenticated remote code execution (RCE) vulnerability exists in multiple WSO2 products due to improper input validation in the event processor admin service. A user with administrative access to the SOAP admin services can exploit this flaw by deploying a Siddhi execution plan containing malicious Java code, resulting in arbitrary code execution on the server. Exploitation of this vulnerability requires a valid user account with administrative privileges, limiting the attack surface to authenticated but potentially malicious users.

An authenticated stored cross-site scripting (XSS) vulnerability exists in multiple WSO2 products due to improper validation of user-supplied input during API document upload in the Publisher portal. A user with publisher privileges can upload a crafted API document containing malicious JavaScript, which is later rendered in the browser when accessed by other users. A successful attack could result in redirection to malicious websites, unauthorized UI modifications, or exfiltration of browser-accessible data. However, session-related sensitive cookies are protected by the httpOnly flag, preventing session hijacking.

A vulnerability has been found in Coinomi up to 1.7.6. This issue affects some unknown processing. Such manipulation leads to cleartext transmission of sensitive information. The attack can be launched remotely. This attack is characterized by high complexity. The exploitability is assessed as difficult. The exploit has been disclosed to the public and may be used. The vendor replied with: "(...) there isn't any security implication associated with your findings."

The huggingface/transformers library, versions prior to 4.53.0, is vulnerable to Regular Expression Denial of Service (ReDoS) in the AdamWeightDecay optimizer. The vulnerability arises from the _do_use_weight_decay method, which processes user-controlled regular expressions in the include_in_weight_decay and exclude_from_weight_decay lists. Malicious regular expressions can cause catastrophic backtracking during the re.search call, leading to 100% CPU utilization and a denial of service. This issue can be exploited by attackers who can control the patterns in these lists, potentially causing the machine learning task to hang and rendering services unresponsive.

A maliciously crafted RFA file, when parsed through Autodesk Revit, can force a Type Confusion vulnerability. A malicious actor may leverage this vulnerability to cause a crash, cause data corruption, or execute arbitrary code in the context of the current process.

Uncontrolled Search Path Element vulnerability in Salesforce Salesforce CLI on Windows allows Replace Trusted Executable.This issue affects Salesforce CLI: before 2.106.6.

The vulnerability allows any application installed on the device to read SMS/MMS data and metadata from the system-provided Telephony provider without permission, user interaction, or consent. The user is also not notified that SMS data is being accessed. This could lead to sensitive information disclosure and could effectively break the security provided by SMS-based Multi-Factor Authentication (MFA) checks. The root cause is a combination of missing permissions for write operations in several content providers (com.android.providers.telephony.PushMessageProvider, com.android.providers.telephony.PushShopProvider, com.android.providers.telephony.ServiceNumberProvider), and a blind SQL injection in the update method of those providers.

Not used

Not used

Not used

Not used

Not used

Not used

Not used

Unrestricted Upload of File with Dangerous Type vulnerability in TalentSys Consulting Information Technology Industry Inc. Inka.Net allows Command Injection. This issue affects Inka.Net: before 6.7.1.

Improper privilege management vulnerability in Novakon P series allows attackers to gain root privileges if one service is compromized.This issue affects P series: P – V2001.A.C518o2 until P-2.0.05 Build 2026.02.06 (commit d0f97fd9).

Improper authentication vulnerability in Novakon P series allows unauthenticated attackers to upload and download any application from/to the device.This issue affects P series: P – V2001.A.C518o2 until P-2.0.05 Build 2026.02.06 (commit d0f97fd9).

No password for the root user is set in Novakon P series. This allows phyiscal attackers to enter the console easily. This issue affects P series: P – V2001.A.C518o2 until P-2.0.05 Build 2026.02.06 (commit d0f97fd9).

A maliciously crafted HTML payload, when rendered by the Autodesk Fusion desktop application, can trigger a Stored Cross-site Scripting (XSS) vulnerability. A malicious actor may leverage this vulnerability to read local files or execute arbitrary code in the context of the current process.

A path traversal vulnerability in Novakon P series allows to expose the root file system "/" and modify all files with root permissions. This way the system can also be compromized.This issue affects P series: P – V2001.A.C518o2 until P-2.0.05 Build 2026.02.06 (commit d0f97fd9).