CVE Feed

In the Linux kernel, the following vulnerability has been resolved: fs: sysfs: Fix reference leak in sysfs_break_active_protection() The sysfs_break_active_protection() routine has an obvious reference leak in its error path. If the call to kernfs_find_and_get() fails then kn will be NULL, so the companion sysfs_unbreak_active_protection() routine won't get called (and would only cause an access violation by trying to dereference kn->parent if it was called). As a result, the reference to kobj acquired at the start of the function will never be released. Fix the leak by adding an explicit kobject_put() call when kn is NULL.

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_ncm: Fix UAF ncm object at re-bind after usb ep transport error When ncm function is working and then stop usb0 interface for link down, eth_stop() is called. At this piont, accidentally if usb transport error should happen in usb_ep_enable(), 'in_ep' and/or 'out_ep' may not be enabled. After that, ncm_disable() is called to disable for ncm unbind but gether_disconnect() is never called since 'in_ep' is not enabled. As the result, ncm object is released in ncm unbind but 'dev->port_usb' associated to 'ncm->port' is not NULL. And when ncm bind again to recover netdev, ncm object is reallocated but usb0 interface is already associated to previous released ncm object. Therefore, once usb0 interface is up and eth_start_xmit() is called, released ncm object is dereferrenced and it might cause use-after-free memory. [function unlink via configfs] usb0: eth_stop dev->port_usb=ffffff9b179c3200 --> error happens in usb_ep_enable(). NCM: ncm_disable: ncm=ffffff9b179c3200 --> no gether_disconnect() since ncm->port.in_ep->enabled is false. NCM: ncm_unbind: ncm unbind ncm=ffffff9b179c3200 NCM: ncm_free: ncm free ncm=ffffff9b179c3200 <-- released ncm [function link via configfs] NCM: ncm_alloc: ncm alloc ncm=ffffff9ac4f8a000 NCM: ncm_bind: ncm bind ncm=ffffff9ac4f8a000 NCM: ncm_set_alt: ncm=ffffff9ac4f8a000 alt=0 usb0: eth_open dev->port_usb=ffffff9b179c3200 <-- previous released ncm usb0: eth_start dev->port_usb=ffffff9b179c3200 <-- eth_start_xmit() --> dev->wrap() Unable to handle kernel paging request at virtual address dead00000000014f This patch addresses the issue by checking if 'ncm->netdev' is not NULL at ncm_disable() to call gether_disconnect() to deassociate 'dev->port_usb'. It's more reasonable to check 'ncm->netdev' to call gether_connect/disconnect rather than check 'ncm->port.in_ep->enabled' since it might not be enabled but the gether connection might be established.

In the Linux kernel, the following vulnerability has been resolved: serial: core: Clearing the circular buffer before NULLifying it The circular buffer is NULLified in uart_tty_port_shutdown() under the spin lock. However, the PM or other timer based callbacks may still trigger after this event without knowning that buffer pointer is not valid. Since the serial code is a bit inconsistent in checking the buffer state (some rely on the head-tail positions, some on the buffer pointer), it's better to have both aligned, i.e. buffer pointer to be NULL and head-tail possitions to be the same, meaning it's empty. This will prevent asynchronous calls to dereference NULL pointer as reported recently in 8250 case: BUG: kernel NULL pointer dereference, address: 00000cf5 Workqueue: pm pm_runtime_work EIP: serial8250_tx_chars (drivers/tty/serial/8250/8250_port.c:1809) ... ? serial8250_tx_chars (drivers/tty/serial/8250/8250_port.c:1809) __start_tx (drivers/tty/serial/8250/8250_port.c:1551) serial8250_start_tx (drivers/tty/serial/8250/8250_port.c:1654) serial_port_runtime_suspend (include/linux/serial_core.h:667 drivers/tty/serial/serial_port.c:63) __rpm_callback (drivers/base/power/runtime.c:393) ? serial_port_remove (drivers/tty/serial/serial_port.c:50) rpm_suspend (drivers/base/power/runtime.c:447) The proposed change will prevent ->start_tx() to be called during suspend on shut down port.

In the Linux kernel, the following vulnerability has been resolved: clk: mediatek: Do a runtime PM get on controllers during probe mt8183-mfgcfg has a mutual dependency with genpd during the probing stage, which leads to a deadlock in the following call stack: CPU0: genpd_lock --> clk_prepare_lock genpd_power_off_work_fn() genpd_lock() generic_pm_domain::power_off() clk_unprepare() clk_prepare_lock() CPU1: clk_prepare_lock --> genpd_lock clk_register() __clk_core_init() clk_prepare_lock() clk_pm_runtime_get() genpd_lock() Do a runtime PM get at the probe function to make sure clk_register() won't acquire the genpd lock. Instead of only modifying mt8183-mfgcfg, do this on all mediatek clock controller probings because we don't believe this would cause any regression. Verified on MT8183 and MT8192 Chromebooks.

In the Linux kernel, the following vulnerability has been resolved: s390/cio: fix race condition during online processing A race condition exists in ccw_device_set_online() that can cause the online process to fail, leaving the affected device in an inconsistent state. As a result, subsequent attempts to set that device online fail with return code ENODEV. The problem occurs when a path verification request arrives after a wait for final device state completed, but before the result state is evaluated. Fix this by ensuring that the CCW-device lock is held between determining final state and checking result state. Note that since: commit 2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers") path verification requests are much more likely to occur during boot, resulting in an increased chance of this race condition occurring.

In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: incorrect pppoe tuple pppoe traffic reaching ingress path does not match the flowtable entry because the pppoe header is expected to be at the network header offset. This bug causes a mismatch in the flow table lookup, so pppoe packets enter the classical forwarding path.

In the Linux kernel, the following vulnerability has been resolved: netfilter: br_netfilter: skip conntrack input hook for promisc packets For historical reasons, when bridge device is in promisc mode, packets that are directed to the taps follow bridge input hook path. This patch adds a workaround to reset conntrack for these packets. Jianbo Liu reports warning splats in their test infrastructure where cloned packets reach the br_netfilter input hook to confirm the conntrack object. Scratch one bit from BR_INPUT_SKB_CB to annotate that this packet has reached the input hook because it is passed up to the bridge device to reach the taps. [ 57.571874] WARNING: CPU: 1 PID: 0 at net/bridge/br_netfilter_hooks.c:616 br_nf_local_in+0x157/0x180 [br_netfilter] [ 57.572749] Modules linked in: xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat xt_addrtype xt_conntrack nf_nat br_netfilter rpcsec_gss_krb5 auth_rpcgss oid_registry overlay rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_isc si ib_umad rdma_cm ib_ipoib iw_cm ib_cm mlx5_ib ib_uverbs ib_core mlx5ctl mlx5_core [ 57.575158] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.8.0+ #19 [ 57.575700] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 57.576662] RIP: 0010:br_nf_local_in+0x157/0x180 [br_netfilter] [ 57.577195] Code: fe ff ff 41 bd 04 00 00 00 be 04 00 00 00 e9 4a ff ff ff be 04 00 00 00 48 89 ef e8 f3 a9 3c e1 66 83 ad b4 00 00 00 04 eb 91 <0f> 0b e9 f1 fe ff ff 0f 0b e9 df fe ff ff 48 89 df e8 b3 53 47 e1 [ 57.578722] RSP: 0018:ffff88885f845a08 EFLAGS: 00010202 [ 57.579207] RAX: 0000000000000002 RBX: ffff88812dfe8000 RCX: 0000000000000000 [ 57.579830] RDX: ffff88885f845a60 RSI: ffff8881022dc300 RDI: 0000000000000000 [ 57.580454] RBP: ffff88885f845a60 R08: 0000000000000001 R09: 0000000000000003 [ 57.581076] R10: 00000000ffff1300 R11: 0000000000000002 R12: 0000000000000000 [ 57.581695] R13: ffff8881047ffe00 R14: ffff888108dbee00 R15: ffff88814519b800 [ 57.582313] FS: 0000000000000000(0000) GS:ffff88885f840000(0000) knlGS:0000000000000000 [ 57.583040] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 57.583564] CR2: 000000c4206aa000 CR3: 0000000103847001 CR4: 0000000000370eb0 [ 57.584194] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 57.584820] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 57.585440] Call Trace: [ 57.585721] <IRQ> [ 57.585976] ? __warn+0x7d/0x130 [ 57.586323] ? br_nf_local_in+0x157/0x180 [br_netfilter] [ 57.586811] ? report_bug+0xf1/0x1c0 [ 57.587177] ? handle_bug+0x3f/0x70 [ 57.587539] ? exc_invalid_op+0x13/0x60 [ 57.587929] ? asm_exc_invalid_op+0x16/0x20 [ 57.588336] ? br_nf_local_in+0x157/0x180 [br_netfilter] [ 57.588825] nf_hook_slow+0x3d/0xd0 [ 57.589188] ? br_handle_vlan+0x4b/0x110 [ 57.589579] br_pass_frame_up+0xfc/0x150 [ 57.589970] ? br_port_flags_change+0x40/0x40 [ 57.590396] br_handle_frame_finish+0x346/0x5e0 [ 57.590837] ? ipt_do_table+0x32e/0x430 [ 57.591221] ? br_handle_local_finish+0x20/0x20 [ 57.591656] br_nf_hook_thresh+0x4b/0xf0 [br_netfilter] [ 57.592286] ? br_handle_local_finish+0x20/0x20 [ 57.592802] br_nf_pre_routing_finish+0x178/0x480 [br_netfilter] [ 57.593348] ? br_handle_local_finish+0x20/0x20 [ 57.593782] ? nf_nat_ipv4_pre_routing+0x25/0x60 [nf_nat] [ 57.594279] br_nf_pre_routing+0x24c/0x550 [br_netfilter] [ 57.594780] ? br_nf_hook_thresh+0xf0/0xf0 [br_netfilter] [ 57.595280] br_handle_frame+0x1f3/0x3d0 [ 57.595676] ? br_handle_local_finish+0x20/0x20 [ 57.596118] ? br_handle_frame_finish+0x5e0/0x5e0 [ 57.596566] __netif_receive_skb_core+0x25b/0xfc0 [ 57.597017] ? __napi_build_skb+0x37/0x40 [ 57.597418] __netif_receive_skb_list_core+0xfb/0x220

In the Linux kernel, the following vulnerability has been resolved: r8169: fix LED-related deadlock on module removal Binding devm_led_classdev_register() to the netdev is problematic because on module removal we get a RTNL-related deadlock. Fix this by avoiding the device-managed LED functions. Note: We can safely call led_classdev_unregister() for a LED even if registering it failed, because led_classdev_unregister() detects this and is a no-op in this case.

In the Linux kernel, the following vulnerability has been resolved: NTB: fix possible name leak in ntb_register_device() If device_register() fails in ntb_register_device(), the device name allocated by dev_set_name() should be freed. As per the comment in device_register(), callers should use put_device() to give up the reference in the error path. So fix this by calling put_device() in the error path so that the name can be freed in kobject_cleanup(). As a result of this, put_device() in the error path of ntb_register_device() is removed and the actual error is returned. [mani: reworded commit message]

In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate request buffer size in smb2_allocate_rsp_buf() The response buffer should be allocated in smb2_allocate_rsp_buf before validating request. But the fields in payload as well as smb2 header is used in smb2_allocate_rsp_buf(). This patch add simple buffer size validation to avoid potencial out-of-bounds in request buffer.

In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: fix double-free issue in tcpm_port_unregister_pd() When unregister pd capabilitie in tcpm, KASAN will capture below double -free issue. The root cause is the same capabilitiy will be kfreed twice, the first time is kfreed by pd_capabilities_release() and the second time is explicitly kfreed by tcpm_port_unregister_pd(). [ 3.988059] BUG: KASAN: double-free in tcpm_port_unregister_pd+0x1a4/0x3dc [ 3.995001] Free of addr ffff0008164d3000 by task kworker/u16:0/10 [ 4.001206] [ 4.002712] CPU: 2 PID: 10 Comm: kworker/u16:0 Not tainted 6.8.0-rc5-next-20240220-05616-g52728c567a55 #53 [ 4.012402] Hardware name: Freescale i.MX8QXP MEK (DT) [ 4.017569] Workqueue: events_unbound deferred_probe_work_func [ 4.023456] Call trace: [ 4.025920] dump_backtrace+0x94/0xec [ 4.029629] show_stack+0x18/0x24 [ 4.032974] dump_stack_lvl+0x78/0x90 [ 4.036675] print_report+0xfc/0x5c0 [ 4.040289] kasan_report_invalid_free+0xa0/0xc0 [ 4.044937] __kasan_slab_free+0x124/0x154 [ 4.049072] kfree+0xb4/0x1e8 [ 4.052069] tcpm_port_unregister_pd+0x1a4/0x3dc [ 4.056725] tcpm_register_port+0x1dd0/0x2558 [ 4.061121] tcpci_register_port+0x420/0x71c [ 4.065430] tcpci_probe+0x118/0x2e0 To fix the issue, this will remove kree() from tcpm_port_unregister_pd().

In the Linux kernel, the following vulnerability has been resolved: nouveau/dmem: handle kcalloc() allocation failure The kcalloc() in nouveau_dmem_evict_chunk() will return null if the physical memory has run out. As a result, if we dereference src_pfns, dst_pfns or dma_addrs, the null pointer dereference bugs will happen. Moreover, the GPU is going away. If the kcalloc() fails, we could not evict all pages mapping a chunk. So this patch adds a __GFP_NOFAIL flag in kcalloc(). Finally, as there is no need to have physically contiguous memory, this patch switches kcalloc() to kvcalloc() in order to avoid failing allocations.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/pm: Fix NULL pointer dereference when get power limit Because powerplay_table initialization is skipped under sriov case, We check and set default lower and upper OD value if powerplay_table is NULL.

In the Linux kernel, the following vulnerability has been resolved: clk: qcom: mmcc-apq8084: fix terminating of frequency table arrays The frequency table arrays are supposed to be terminated with an empty element. Add such entry to the end of the arrays where it is missing in order to avoid possible out-of-bound access when the table is traversed by functions like qcom_find_freq() or qcom_find_freq_floor(). Only compile tested.

In the Linux kernel, the following vulnerability has been resolved: pci_iounmap(): Fix MMIO mapping leak The #ifdef ARCH_HAS_GENERIC_IOPORT_MAP accidentally also guards iounmap(), which means MMIO mappings are leaked. Move the guard so we call iounmap() for MMIO mappings.

In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: Correct the PDO counting in pd_set Off-by-one errors happen because nr_snk_pdo and nr_src_pdo are incorrectly added one. The index of the loop is equal to the number of PDOs to be updated when leaving the loop and it doesn't need to be added one. When doing the power negotiation, TCPM relies on the "nr_snk_pdo" as the size of the local sink PDO array to match the Source capabilities of the partner port. If the off-by-one overflow occurs, a wrong RDO might be sent and unexpected power transfer might happen such as over voltage or over current (than expected). "nr_src_pdo" is used to set the Rp level when the port is in Source role. It is also the array size of the local Source capabilities when filling up the buffer which will be sent as the Source PDOs (such as in Power Negotiation). If the off-by-one overflow occurs, a wrong Rp level might be set and wrong Source PDOs will be sent to the partner port. This could potentially cause over current or port resets.

In the Linux kernel, the following vulnerability has been resolved: userfaultfd: change src_folio after ensuring it's unpinned in UFFDIO_MOVE Commit d7a08838ab74 ("mm: userfaultfd: fix unexpected change to src_folio when UFFDIO_MOVE fails") moved the src_folio->{mapping, index} changing to after clearing the page-table and ensuring that it's not pinned. This avoids failure of swapout+migration and possibly memory corruption. However, the commit missed fixing it in the huge-page case.

In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: validate pppoe header Ensure there is sufficient room to access the protocol field of the PPPoe header. Validate it once before the flowtable lookup, then use a helper function to access protocol field.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: Fix potential data-race in __nft_obj_type_get() nft_unregister_obj() can concurrent with __nft_obj_type_get(), and there is not any protection when iterate over nf_tables_objects list in __nft_obj_type_get(). Therefore, there is potential data-race of nf_tables_objects list entry. Use list_for_each_entry_rcu() to iterate over nf_tables_objects list in __nft_obj_type_get(), and use rcu_read_lock() in the caller nft_obj_type_get() to protect the entire type query process.

Totolink AC1200 Wireless Dual Band Gigabit Router A3002R_V4 Firmware V4.0.0-B20230531.1404 is vulnerable to Buffer Overflow via the formWlEncrypt function of the boa server. Specifically, they exploit the length of the wlan_ssid field triggers the overflow.

lunasvg v2.3.9 was discovered to contain a segmentation violation via the component composition_solid_source_over.

lunasvg v2.3.9 was discovered to contain a segmentation violation via the component composition_solid_source.

lunasvg v2.3.9 was discovered to contain a stack-buffer-underflow at lunasvg/source/layoutcontext.cpp.

Tenda AC18 V15.03.05.05 has a stack overflow vulnerability in the remoteIp parameter from formSetSafeWanWebMan function.

An issue in flusity-CMS v.2.33 allows a remote attacker to execute arbitrary code via the add_post.php component.

An issue in phiola/src/afilter/conv.c:115 of phiola v2.0-rc22 allows a remote attacker to cause a denial of service via a crafted .wav file.

Buffer-Overflow vulnerability at conv.c:68 of stsaz phiola v2.0-rc22 allows a remote attacker to execute arbitrary code via the a crafted .wav file.

A cross-site scripting (XSS) vulnerability in the Settings menu of CMSimple v5.15 allows attackers to execute arbitrary web scripts or HTML via a crafted payload injected into the Downloads parameter under the Language section.

SourceCodester Laboratory Management System 1.0 is vulnerable to Cross Site Scripting (XSS) via "Last Name" parameter in Create User.

SourceCodester Product Show Room 1.0 is vulnerable to Cross Site Scripting (XSS) via "Last Name" under Add Users.

Typora v1.0.0 through v1.7 version (below) Markdown editor has a cross-site scripting (XSS) vulnerability, which allows attackers to execute arbitrary code by uploading Markdown files.

SQL Injection vulnerability in Realisation MGSD v.1.0 allows a remote attacker to obtain sensitive information via the id parameter.

Tencent Libpag v4.3 is vulnerable to Buffer Overflow. A user can send a crafted image to trigger a overflow leading to remote code execution.

The LoMag WareHouse Management application version 1.0.20.120 and older were found to allow weak passwords. By default, hard-coded passwords of 10 characters with little or no complexity are allowed.

An issue in LOGINT LoMag Inventory Management v1.0.20.120 and before allows a local attacker to obtain sensitive information via the UserClass.cs and Settings.cs components.

In Logpoint before 7.4.0, an attacker can enumerate a valid list of usernames by using publicly exposed URLs of shared widgets.

In the Linux kernel, the following vulnerability has been resolved: nvme: host: fix double-free of struct nvme_id_ns in ns_update_nuse() When nvme_identify_ns() fails, it frees the pointer to the struct nvme_id_ns before it returns. However, ns_update_nuse() calls kfree() for the pointer even when nvme_identify_ns() fails. This results in KASAN double-free, which was observed with blktests nvme/045 with proposed patches [1] on the kernel v6.8-rc7. Fix the double-free by skipping kfree() when nvme_identify_ns() fails.

In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: do not realloc workqueue everytime an interface is added Commit 09ed8bfc5215 ("wilc1000: Rename workqueue from "WILC_wq" to "NETDEV-wq"") moved workqueue creation in wilc_netdev_ifc_init in order to set the interface name in the workqueue name. However, while the driver needs only one workqueue, the wilc_netdev_ifc_init is called each time we add an interface over a phy, which in turns overwrite the workqueue with a new one. This can be observed with the following commands: for i in $(seq 0 10) do iw phy phy0 interface add wlan1 type managed iw dev wlan1 del done ps -eo pid,comm|grep wlan 39 kworker/R-wlan0 98 kworker/R-wlan1 102 kworker/R-wlan1 105 kworker/R-wlan1 108 kworker/R-wlan1 111 kworker/R-wlan1 114 kworker/R-wlan1 117 kworker/R-wlan1 120 kworker/R-wlan1 123 kworker/R-wlan1 126 kworker/R-wlan1 129 kworker/R-wlan1 Fix this leakage by putting back hif_workqueue allocation in wilc_cfg80211_init. Regarding the workqueue name, it is indeed relevant to set it lowercase, however it is not attached to a specific netdev, so enforcing netdev name in the name is not so relevant. Still, enrich the name with the wiphy name to make it clear which phy is using the workqueue.

In the Linux kernel, the following vulnerability has been resolved: media: v4l2-mem2mem: fix a memleak in v4l2_m2m_register_entity The entity->name (i.e. name) is allocated in v4l2_m2m_register_entity but isn't freed in its following error-handling paths. This patch adds such deallocation to prevent memleak of entity->name.

In the Linux kernel, the following vulnerability has been resolved: backlight: hx8357: Fix potential NULL pointer dereference The "im" pins are optional. Add missing check in the hx8357_probe().

In the Linux kernel, the following vulnerability has been resolved: ovl: relax WARN_ON in ovl_verify_area() syzbot hit an assertion in copy up data loop which looks like it is the result of a lower file whose size is being changed underneath overlayfs. This type of use case is documented to cause undefined behavior, so returning EIO error for the copy up makes sense, but it should not be causing a WARN_ON assertion.

In the Linux kernel, the following vulnerability has been resolved: xen/evtchn: avoid WARN() when unbinding an event channel When unbinding a user event channel, the related handler might be called a last time in case the kernel was built with CONFIG_DEBUG_SHIRQ. This might cause a WARN() in the handler. Avoid that by adding an "unbinding" flag to struct user_event which will short circuit the handler.

In the Linux kernel, the following vulnerability has been resolved: thermal/drivers/mediatek/lvts_thermal: Fix a memory leak in an error handling path If devm_krealloc() fails, then 'efuse' is leaking. So free it to avoid a leak.

In the Linux kernel, the following vulnerability has been resolved: nouveau: lock the client object tree. It appears the client object tree has no locking unless I've missed something else. Fix races around adding/removing client objects, mostly vram bar mappings. 4562.099306] general protection fault, probably for non-canonical address 0x6677ed422bceb80c: 0000 [#1] PREEMPT SMP PTI [ 4562.099314] CPU: 2 PID: 23171 Comm: deqp-vk Not tainted 6.8.0-rc6+ #27 [ 4562.099324] Hardware name: Gigabyte Technology Co., Ltd. Z390 I AORUS PRO WIFI/Z390 I AORUS PRO WIFI-CF, BIOS F8 11/05/2021 [ 4562.099330] RIP: 0010:nvkm_object_search+0x1d/0x70 [nouveau] [ 4562.099503] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 66 0f 1f 00 0f 1f 44 00 00 48 89 f8 48 85 f6 74 39 48 8b 87 a0 00 00 00 48 85 c0 74 12 <48> 8b 48 f8 48 39 ce 73 15 48 8b 40 10 48 85 c0 75 ee 48 c7 c0 fe [ 4562.099506] RSP: 0000:ffffa94cc420bbf8 EFLAGS: 00010206 [ 4562.099512] RAX: 6677ed422bceb814 RBX: ffff98108791f400 RCX: ffff9810f26b8f58 [ 4562.099517] RDX: 0000000000000000 RSI: ffff9810f26b9158 RDI: ffff98108791f400 [ 4562.099519] RBP: ffff9810f26b9158 R08: 0000000000000000 R09: 0000000000000000 [ 4562.099521] R10: ffffa94cc420bc48 R11: 0000000000000001 R12: ffff9810f02a7cc0 [ 4562.099526] R13: 0000000000000000 R14: 00000000000000ff R15: 0000000000000007 [ 4562.099528] FS: 00007f629c5017c0(0000) GS:ffff98142c700000(0000) knlGS:0000000000000000 [ 4562.099534] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4562.099536] CR2: 00007f629a882000 CR3: 000000017019e004 CR4: 00000000003706f0 [ 4562.099541] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 4562.099542] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 4562.099544] Call Trace: [ 4562.099555] <TASK> [ 4562.099573] ? die_addr+0x36/0x90 [ 4562.099583] ? exc_general_protection+0x246/0x4a0 [ 4562.099593] ? asm_exc_general_protection+0x26/0x30 [ 4562.099600] ? nvkm_object_search+0x1d/0x70 [nouveau] [ 4562.099730] nvkm_ioctl+0xa1/0x250 [nouveau] [ 4562.099861] nvif_object_map_handle+0xc8/0x180 [nouveau] [ 4562.099986] nouveau_ttm_io_mem_reserve+0x122/0x270 [nouveau] [ 4562.100156] ? dma_resv_test_signaled+0x26/0xb0 [ 4562.100163] ttm_bo_vm_fault_reserved+0x97/0x3c0 [ttm] [ 4562.100182] ? __mutex_unlock_slowpath+0x2a/0x270 [ 4562.100189] nouveau_ttm_fault+0x69/0xb0 [nouveau] [ 4562.100356] __do_fault+0x32/0x150 [ 4562.100362] do_fault+0x7c/0x560 [ 4562.100369] __handle_mm_fault+0x800/0xc10 [ 4562.100382] handle_mm_fault+0x17c/0x3e0 [ 4562.100388] do_user_addr_fault+0x208/0x860 [ 4562.100395] exc_page_fault+0x7f/0x200 [ 4562.100402] asm_exc_page_fault+0x26/0x30 [ 4562.100412] RIP: 0033:0x9b9870 [ 4562.100419] Code: 85 a8 f7 ff ff 8b 8d 80 f7 ff ff 89 08 e9 18 f2 ff ff 0f 1f 84 00 00 00 00 00 44 89 32 e9 90 fa ff ff 0f 1f 84 00 00 00 00 00 <44> 89 32 e9 f8 f1 ff ff 0f 1f 84 00 00 00 00 00 66 44 89 32 e9 e7 [ 4562.100422] RSP: 002b:00007fff9ba2dc70 EFLAGS: 00010246 [ 4562.100426] RAX: 0000000000000004 RBX: 000000000dd65e10 RCX: 000000fff0000000 [ 4562.100428] RDX: 00007f629a882000 RSI: 00007f629a882000 RDI: 0000000000000066 [ 4562.100432] RBP: 00007fff9ba2e570 R08: 0000000000000000 R09: 0000000123ddf000 [ 4562.100434] R10: 0000000000000001 R11: 0000000000000246 R12: 000000007fffffff [ 4562.100436] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 [ 4562.100446] </TASK> [ 4562.100448] Modules linked in: nf_conntrack_netbios_ns nf_conntrack_broadcast nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables libcrc32c nfnetlink cmac bnep sunrpc iwlmvm intel_rapl_msr intel_rapl_common snd_sof_pci_intel_cnl x86_pkg_temp_thermal intel_powerclamp snd_sof_intel_hda_common mac80211 coretemp snd_soc_acpi_intel_match kvm_intel snd_soc_acpi snd_soc_hdac_hda snd_sof_pci snd_sof_xtensa_dsp snd_sof_intel_hda_mlink ---truncated---

In the Linux kernel, the following vulnerability has been resolved: crypto: sun8i-ce - Fix use after free in unprepare sun8i_ce_cipher_unprepare should be called before crypto_finalize_skcipher_request, because client callbacks may immediately free memory, that isn't needed anymore. But it will be used by unprepare after free. Before removing prepare/unprepare callbacks it was handled by crypto engine in crypto_finalize_request. Usually that results in a pointer dereference problem during a in crypto selftest. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000030 Mem abort info: ESR = 0x0000000096000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x04: level 0 translation fault Data abort info: ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 CM = 0, WnR = 0, TnD = 0, TagAccess = 0 GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=000000004716d000 [0000000000000030] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 0000000096000004 [#1] SMP This problem is detected by KASAN as well. ================================================================== BUG: KASAN: slab-use-after-free in sun8i_ce_cipher_do_one+0x6e8/0xf80 [sun8i_ce] Read of size 8 at addr ffff00000dcdc040 by task 1c15000.crypto-/373 Hardware name: Pine64 PinePhone (1.2) (DT) Call trace: dump_backtrace+0x9c/0x128 show_stack+0x20/0x38 dump_stack_lvl+0x48/0x60 print_report+0xf8/0x5d8 kasan_report+0x90/0xd0 __asan_load8+0x9c/0xc0 sun8i_ce_cipher_do_one+0x6e8/0xf80 [sun8i_ce] crypto_pump_work+0x354/0x620 [crypto_engine] kthread_worker_fn+0x244/0x498 kthread+0x168/0x178 ret_from_fork+0x10/0x20 Allocated by task 379: kasan_save_stack+0x3c/0x68 kasan_set_track+0x2c/0x40 kasan_save_alloc_info+0x24/0x38 __kasan_kmalloc+0xd4/0xd8 __kmalloc+0x74/0x1d0 alg_test_skcipher+0x90/0x1f0 alg_test+0x24c/0x830 cryptomgr_test+0x38/0x60 kthread+0x168/0x178 ret_from_fork+0x10/0x20 Freed by task 379: kasan_save_stack+0x3c/0x68 kasan_set_track+0x2c/0x40 kasan_save_free_info+0x38/0x60 __kasan_slab_free+0x100/0x170 slab_free_freelist_hook+0xd4/0x1e8 __kmem_cache_free+0x15c/0x290 kfree+0x74/0x100 kfree_sensitive+0x80/0xb0 alg_test_skcipher+0x12c/0x1f0 alg_test+0x24c/0x830 cryptomgr_test+0x38/0x60 kthread+0x168/0x178 ret_from_fork+0x10/0x20 The buggy address belongs to the object at ffff00000dcdc000 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 64 bytes inside of freed 256-byte region [ffff00000dcdc000, ffff00000dcdc100)

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: Fix a memory leak in nf_tables_updchain If nft_netdev_register_hooks() fails, the memory associated with nft_stats is not freed, causing a memory leak. This patch fixes it by moving nft_stats_alloc() down after nft_netdev_register_hooks() succeeds.

This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

In the Linux kernel, the following vulnerability has been resolved: s390/dasd: fix double module refcount decrement Once the discipline is associated with the device, deleting the device takes care of decrementing the module's refcount. Doing it manually on this error path causes refcount to artificially decrease on each error while it should just stay the same.

In the Linux kernel, the following vulnerability has been resolved: cpufreq: brcmstb-avs-cpufreq: add check for cpufreq_cpu_get's return value cpufreq_cpu_get may return NULL. To avoid NULL-dereference check it and return 0 in case of error. Found by Linux Verification Center (linuxtesting.org) with SVACE.

In the Linux kernel, the following vulnerability has been resolved: nfp: flower: handle acti_netdevs allocation failure The kmalloc_array() in nfp_fl_lag_do_work() will return null, if the physical memory has run out. As a result, if we dereference the acti_netdevs, the null pointer dereference bugs will happen. This patch adds a check to judge whether allocation failure occurs. If it happens, the delayed work will be rescheduled and try again.