CVE Feed

Exposure of sensitive system information to an unauthorized control sphere vulnerability in Zyxel Networks WAH7601 allows Web Application Fingerprinting. This issue affects WAH7601: through 20072026.

Use of Hard-coded Credentials vulnerability in Zyxel Networks WAH7601 allows Read Sensitive Constants Within an Executable. This issue affects WAH7601: through 20.07.2026.

Missing Authorization in the permission management component in Roskus Prospero Flow CRM before 5.2.1 allows any authenticated user to grant any role, including their own, the complete set of application permissions via a crafted POST request to the permission save endpoint, which performs no authorization check before synchronizing the submitted permissions to the specified role.

A flaw was found in StackRox/RHACS Central's Auth Machine-to-Machine (M2M) token exchange. When an administrator configures M2M role mappings, the system uses unanchored regular expressions for matching claim values. This allows an attacker with a valid OpenID Connect (OIDC) token, whose claim value is a superstring of a configured pattern, to gain unauthorized access to roles they were not intended to receive. This can lead to privilege escalation within the system.

A flaw was found in GIMP's PSD file format plugin. This vulnerability, an unsigned integer underflow in the `block_rem` variable, occurs when a user opens a specially crafted `.psd` image file. The underflow leads to parser confusion, enabling an attacker to inject arbitrary data as layer resource blocks. This can ultimately result in arbitrary code execution, allowing the attacker to run malicious code on the victim's system.

This CVE ID has been rejected or withdrawn by its CVE Numbering Authority.

In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: Fix use-after-free on vendor module reload mmu_destroy_caches() destroys pte_list_desc_cache and mmu_page_header_cache, but leaves both pointers unchanged. The pointers live in kvm.ko, and therefore survive when a vendor module is unloaded while kvm.ko remains loaded. If creation of pte_list_desc_cache fails during a subsequent vendor module load, its assignment sets pte_list_desc_cache to NULL and the error path calls mmu_destroy_caches(). mmu_page_header_cache still points to the cache destroyed during the preceding vendor module unload. Passing that stale pointer to kmem_cache_destroy() causes a slab use-after-free. Reproduce the issue on a v7.1.3 kernel with CONFIG_KASAN=y, CONFIG_KASAN_GENERIC=y, CONFIG_KVM=m, and CONFIG_KVM_INTEL=m. A one-shot test hook forces pte_list_desc_cache to NULL on the second invocation of kvm_mmu_vendor_module_init(): 1. Load kvm.ko and kvm-intel.ko, creating both caches. 2. Unload only kvm_intel, leaving kvm.ko loaded. 3. Reload kvm_intel and force initialization through the -ENOMEM path. KASAN reports: BUG: KASAN: slab-use-after-free in kvm_mmu_vendor_module_init+0x5b/0x170 [kvm] ... kmem_cache_destroy+0x21/0x1d0 kvm_mmu_vendor_module_init+0x5b/0x170 [kvm] ... Allocated by task 16817: __kmem_cache_create_args+0x12c/0x3b0 __kmem_cache_create.constprop.0+0xb6/0xf0 [kvm] kvm_mmu_vendor_module_init+0x13b/0x170 [kvm] ... Freed by task 16820: kmem_cache_destroy+0x117/0x1d0 kvm_mmu_vendor_module_exit+0x21/0x30 [kvm] Clear both pointers immediately after destroying their caches so that the stored state reflects the caches' lifetime and repeated cleanup is safe. With the fix applied, the same injected vendor module reload fails with -ENOMEM as expected and produces no KASAN report.

In the Linux kernel, the following vulnerability has been resolved: IB/mad: Drop unmatched RMPP responses before reassembly Kernel-handled RMPP receive processing starts reassembly for active DATA responses before the response is matched to an outstanding send. The normal match happens later, after ib_process_rmpp_recv_wc() has either assembled a complete message or consumed the segment. That ordering lets an unsolicited response that routes to a kernel RMPP agent by the high TID bits allocate or extend RMPP receive state before the full TID and source address are checked against a real request. A reordered burst can therefore reach the receive-side insertion path even though the response would not match any send. For kernel-handled RMPP DATA responses, require the existing ib_find_send_mad() match before entering RMPP reassembly. The matcher already checks the full TID, management class and source address/GID against the agent wait, backlog and in-flight send lists. If there is no match, drop the response without creating RMPP state. This leaves the RMPP window behavior unchanged and only rejects responses that have no corresponding request.

In the Linux kernel, the following vulnerability has been resolved: mtd: virt_concat: fix use-after-free in mtd_virt_concat_destroy_joins() mtd_concat_destroy() frees item->concat so calling mtd_virt_concat_put_mtd_devices(item->concat) leads to a use after free. Fix this by moving mtd_virt_concat_put_mtd_devices() before mtd_concat_destroy()

In the Linux kernel, the following vulnerability has been resolved: mtd: virt_concat: fix use-after-free in mtd_virt_concat_destroy() mtd_concat_destroy() frees item->concat so calling mtd_virt_concat_put_mtd_devices(item->concat) after that leads to a use-after-free. Fix it by moving mtd_virt_concat_put_mtd_devices() before mtd_concat_destroy().

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix root leak if its reloc root is unexpected in merge_reloc_roots() If we have an unexpected reloc_root for our root, we jump to the out label but never drop the reference we obtained for root, resulting in a leak. Add a missing btrfs_put_root() call.

In the Linux kernel, the following vulnerability has been resolved: sched_ext: Don't warn on core-sched forced idle in put_prev_task_scx() put_prev_task_scx() warns when a runnable task drops to a lower sched_class without SCX_OPS_ENQ_LAST, on the assumption that balance_one() would have kept it running. Core scheduling breaks that: a forced-idle SMT sibling reschedules through the core_pick fast path in pick_next_task(), which skips pick_task_scx() and thus balance_one(), so a runnable task can drop to idle with ENQ_LAST unset. Gate the warning on sched_cpu_cookie_match(): a cookie mismatch means core scheduling forced the idle, while a match (or core scheduling off) still catches a genuine missing-ENQ_LAST drop.

In the Linux kernel, the following vulnerability has been resolved: RDMA/irdma: Prevent user-triggered null deref on QP create Previously, the user QP creation path would only attempt to populate iwqp->iwpbl if the user-provided req.user_wqe_bufs field was non-zero. The problem is that iwqp->iwpbl is unconditionally dereferenced later on in irdma_setup_virt_qp. While there was a check for iwqp->iwpbl != NULL, this check would only occur if req.user_wqe_bufs was non-zero. The end result is that a user could send a zero user_wqe_bufs value and trigger a null ptr deref. Fix this by unconditionally calling irdma_get_pbl and bailing if it fails, similar to the CQ and SRQ paths.

In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: publish QP after initialization siw_create_qp() currently calls siw_qp_add() before the queues, CQ pointers, state, completion, and device list entry are ready. A QPN lookup can therefore reach a QP that is still being constructed. Move siw_qp_add() to the end of siw_create_qp(), after QP initialization and before adding the QP to the siw device list.

In the Linux kernel, the following vulnerability has been resolved: xfrm: clear mode callbacks after failed mode setup xfrm_state_gc_task can run long after a failed IPTFS state setup. In the reproduced case, __xfrm_init_state() cached x->mode_cbs, IPTFS setup returned -ENOMEM before publishing mode_data, and the temporary module reference from xfrm_get_mode_cbs() was dropped immediately. The dead state then kept x->mode_cbs until deferred GC ran after xfrm_iptfs had been unloaded. Clear x->mode_cbs when mode init or clone fails before publishing mode_data. Those states never installed mode-specific state or the long-term IPTFS module pin, so deferred GC has nothing mode-specific to destroy and must not retain a callback table pointer past the temporary lookup reference. The buggy scenario involves two paths, with each column showing the order within that path: failed setup path: 1. cache x->mode_cbs 2. mode setup fails before mode_data 3. drop the temporary module ref 4. dead state keeps x->mode_cbs cached GC/unload path: 1. xfrm_state_put() queues GC work 2. xfrm_iptfs unloads later 3. xfrm_state_gc_task runs 4. GC dereferences stale x->mode_cbs This also covers the failed clone path where clone_state() returns before publishing mode_data. Validation reproduced this kernel report: Kernel panic - not syncing: Fatal exception CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y failslab_stacktrace_filter matched xfrm_iptfs frames ack_error=-12 FAULT_INJECTION: forcing a failure BUG: unable to handle page fault Workqueue: events xfrm_state_gc_task RIP: xfrm_state_gc_task+0x142/0x650 Modules linked in: esp4_offload xfrm_user [last unloaded: xfrm_iptfs] Kernel panic - not syncing: Fatal exception

In the Linux kernel, the following vulnerability has been resolved: wifi: ipw2100: fix potential memory leak in ipw2100_pci_init_one() The memory allocated in the ipw2100_alloc_device() function is not freed in some of the error paths in ipw2100_pci_init_one(). Fix that by converting the direct return into a goto to the error path return. The error path when pci_enable_device() fails cannot jump to fail, since at this point priv is not set, so perform error handling inline.

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: Fix an error handling path in cfg80211_wext_siwscan() If the test against IEEE80211_MAX_SSID_LEN fails, then 'creq' leaks. Use the existing error handling path to fix it.

In the Linux kernel, the following vulnerability has been resolved: wifi: libertas: fix memory leak in helper_firmware_cb() helper_firmware_cb() neglects to free the single-stage firmware image after a successful async load, leading to a memory leak in the USB firmware-download path. Fix this memory leak by calling release_firmware() immediately after lbs_fw_loaded() returns. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in the current wireless tree. An x86_64 allyesconfig build showed no new warnings. As we do not have compatible Libertas USB hardware for exercising this firmware-download path, no runtime testing was able to be performed.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: defer link RX stats percpu free to RCU sta_remove_link() frees a removed MLO link's RX stats percpu buffer right away, but defers only the link container to RCU: sta_info_free_link(&alloc->info); kfree_rcu(alloc, rcu_head); The RX fast path reads link_sta under rcu_read_lock and writes the percpu stats. A reader that resolved link_sta before the removal keeps the pointer. The container stays alive from the kfree_rcu, so the read still works. But the percpu block it points to is already freed. This needs uses_rss. That is when pcpu_rx_stats exists. The full STA teardown frees the deflink stats only after synchronize_net(). The link removal path had no such barrier. The race is hard to win in practice, but the free should still wait for RCU. Free the link together with its data from a single RCU callback, so the percpu block is reclaimed only after readers drain.

In the Linux kernel, the following vulnerability has been resolved: wifi: nl80211: free RNR data on MBSSID mismatch nl80211_parse_beacon() rejects EMA RNR data when there are fewer RNR entries than MBSSID entries. The rejected RNR allocation has not been attached to the beacon data yet, so free it before returning the error.

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: validate PMSR FTM preamble range PMSR FTM request parsing accepts preamble values outside the enumerated nl80211 preamble range. Reject out-of-range values before using them in the parser capability bit test using the policy. [drop unnecessary check]

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: free AP_VLAN bc_buf SKBs outside IRQ lock ieee80211_do_stop() removes AP_VLAN packets from the parent AP ps->bc_buf while holding ps->bc_buf.lock with IRQs disabled. It then calls ieee80211_free_txskb() before dropping the lock. ieee80211_free_txskb() is not just a passive SKB release. For SKBs with TX status state it can report a dropped frame through cfg80211/nl80211, and that path can reach netlink tap transmit. This is the same reason the pending queue cleanup in ieee80211_do_stop() already unlinks SKBs under the queue lock and frees them after IRQ state is restored. The buggy scenario involves two paths, with each column showing the order within that path: AP_VLAN management TX: AP_VLAN stop: 1. attach ACK-status state 1. clear the running state 2. queue a multicast SKB on 2. take ps->bc_buf.lock with IRQs parent ps->bc_buf disabled 3. unlink the AP_VLAN SKB 4. call ieee80211_free_txskb() Unlink matching AP_VLAN SKBs from ps->bc_buf under the existing lock, but move them to a local free queue. Drop the lock and restore IRQ state before calling ieee80211_free_txskb(). WARNING: kernel/softirq.c:430 at __local_bh_enable_ip

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: use wiphy work for socket owner autodisconnect nl80211_netlink_notify() walks the cfg80211 wireless device list when a NETLINK_GENERIC socket is released. If the socket owns a connection, the notifier queues the embedded wdev->disconnect_wk work item. That work is a plain work_struct today. NETDEV_GOING_DOWN cancels it, but a NETLINK_URELEASE notifier that already observed conn_owner_nlportid can queue it after that cancel returns. _cfg80211_unregister_wdev() then removes the wdev from the list and waits for RCU readers, but synchronize_net() does not drain work queued by such a reader. Make the autodisconnect work a wiphy_work instead. The callback already needs the wiphy mutex, and wiphy_work runs under that mutex. This lets teardown cancel pending autodisconnect work while holding the mutex, without a cancel_work_sync() vs. worker locking concern. Also cancel the wiphy work after list_del_rcu() and synchronize_net(). Any NETLINK_URELEASE notifier that had already reached the wdev list has then either queued the work and it is removed, or can no longer find the wdev.

In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: bound element ID read when checking non-inheritance cfg80211_is_element_inherited() reads the first data octet of the candidate element (id = elem->data[0]) to look it up in an extension non-inheritance list. It does so after testing elem->id, but without verifying that the element actually has a data octet. A zero-length extension element (WLAN_EID_EXTENSION with length 0) therefore makes it read one octet past the end of the element. _ieee802_11_parse_elems_full() runs this check for every element of a frame once a non-inheritance context exists -- e.g. while parsing a per-STA profile of a Multi-Link element in a (re)association response, or a non-transmitted BSS profile -- so a crafted frame from an AP can trigger a one-octet slab-out-of-bounds read during element parsing: BUG: KASAN: slab-out-of-bounds in cfg80211_is_element_inherited Read of size 1 ... in net/wireless/scan.c Return early (treat the element as inherited) when an extension element carries no data, mirroring the existing handling of empty ID lists. The bug was found by fuzzing ieee802_11_parse_elems_full() under KASAN.

In the Linux kernel, the following vulnerability has been resolved: firmware: arm_ffa: Fix out-of-bound writes in ffa_setup_and_transmit() Sashiko (locally) reports multiple out-of-bound issues in ffa_setup_and_transmit: 1) Writing ep_mem_access->reserved can write out of bounds for FFA versions < 1.2 as ffa_emad_size_get() returns 16 bytes in that case while reserved has an offset of 24. Instead of zeroing fields, memset the struct to zero first based on the FFA version. 2) Make sure there is enough size to write constituents. While at it, convert the only sizeof() in the driver that uses a type instead of variable.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix UAF in sock clone early bailouts Similar to recent commit 9b51a6155d14 ("bpf,fork: wipe ->bpf_storage before bailouts that access it"), sk_clone() performs an initial shallow copy of the socket field ->sk_bpf_storage via sock_copy() for the cloned socket newsk. If sk_clone() bails out early (e.g. if sk_filter_charge() fails) prior to calling bpf_sk_storage_clone(), newsk->sk_bpf_storage still points to the parent socket's BPF local storage. When newsk is subsequently freed via sk_free(), the deallocation path (__sk_destruct() -> bpf_sk_storage_free()) destroys the parent socket's BPF local storage, leading to a use-after-free (UAF) on the parent socket. Fix this by resetting newsk->sk_bpf_storage to NULL immediately after sock_copy() in sk_clone(), and remove the now redundant initialization from bpf_sk_storage_clone().

In the Linux kernel, the following vulnerability has been resolved: ppp: defer channel free to an RCU grace period to fix pppol2tp RX UAF pppol2tp_recv() runs in the L2TP UDP-encap softirq RX path: l2tp_udp_encap_recv() -> l2tp_recv_common() -> pppol2tp_recv() -> ppp_input(&po->chan) It runs under rcu_read_lock() holding only an l2tp_session reference and takes NO reference on the internal PPP channel (struct channel, chan->ppp) that ppp_input() dereferences. The pppox socket is SOCK_RCU_FREE, so 'po' and the embedded ppp_channel are RCU-safe. But the internal struct channel is a separate allocation that ppp_release_channel() frees with a plain kfree(): close(data socket) -> pppol2tp_release() -> pppox_unbind_sock() -> ppp_unregister_channel() -> ppp_release_channel() -> kfree(pch) For a channel that is bound (PPPIOCGCHAN) but not attached to a ppp unit (no PPPIOCCONNECT, pch->ppp == NULL) and not bridged, teardown skips both ppp_disconnect_channel()'s synchronize_net() and ppp_unbridge_channels()'s synchronize_rcu(), so the kfree() has no grace period. rcu_read_lock() in pppol2tp_recv() does not protect against a plain kfree(), so an in-flight ppp_input() on one CPU can dereference the channel just freed by close() on another CPU. The bug is reachable by an unprivileged user. Defer the channel free to an RCU callback via call_rcu() so the grace period fences any in-flight ppp_input(). The disconnect and unbridge teardown paths already fence with synchronize_net()/synchronize_rcu(); call_rcu() does the same here without stalling the close() path.

In the Linux kernel, the following vulnerability has been resolved: net/iucv: take a reference on the socket found in afiucv_hs_rcv() afiucv_hs_rcv() looks up the destination socket under iucv_sk_list.lock, drops the lock, and then passes the socket to the afiucv_hs_callback_*() handlers without holding a reference. AF_IUCV sockets are not RCU-protected and are freed synchronously by iucv_sock_kill() -> sock_put(), so a concurrent close can free the socket in the window between read_unlock() and the handler, which then dereferences freed memory (for example sk->sk_data_ready() in afiucv_hs_callback_syn()). Take a reference with sock_hold() while the socket is still on the list and release it with sock_put() once the handler has run.

In the Linux kernel, the following vulnerability has been resolved: ata: sata_dwc_460ex: enable SATA interrupts only after IRQ handler is registered sata_dwc_enable_interrupts() is called before platform_get_irq() and ata_host_activate(), leaving the SATA controller's interrupt mask enabled without a registered handler. If a later step fails (irq request, phy init, etc.) or if the controller asserts an interrupt during probe, the irq line may fire with no handler, causing a spurious interrupt storm. Move sata_dwc_enable_interrupts() after ata_host_activate() so that interrupts are only unmasked once the handler is registered and the core is fully initialized.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: revalidate LOAD_CONN_PARAM queued update MGMT_OP_LOAD_CONN_PARAM queues conn_update_sync() when a single parameter update changes an existing LE central connection. The queued work currently stores a borrowed hci_conn_params entry from hdev->le_conn_params. A later LOAD_CONN_PARAM request can clear disabled parameters and free that entry before hci_cmd_sync_work() runs the queued callback. Do not keep the borrowed hci_conn_params pointer in queued work. Queue the hci_conn instead and hold a reference until the queued callback completes. When the work runs, revalidate that the connection is still present, look up the current hci_conn_params entry, and cancel the update if userspace removed that entry while the work was pending. Copy the interval values from the current params entry under hdev->lock, then drop the lock and keep using hci_le_conn_update_sync() to issue the update. Validation reproduced this kernel report: BUG: KASAN: slab-use-after-free in conn_update_sync+0x2a/0xf0 [bluetooth] Read of size 1 at addr ffff88810c697126 by task kworker/u17:0/377 Workqueue: hci0 hci_cmd_sync_work [bluetooth] Call Trace: <TASK> dump_stack_lvl+0x66/0xa0 print_report+0xce/0x5f0 kasan_report+0xe0/0x110 conn_update_sync+0x2a/0xf0 [bluetooth] hci_cmd_sync_work+0x187/0x210 [bluetooth] process_one_work+0x4fd/0xbc0 worker_thread+0x2d8/0x570 kthread+0x1ad/0x1f0 ret_from_fork+0x3c9/0x540 ret_from_fork_asm+0x1a/0x30 Allocated by task 466: hci_conn_params_add+0xa6/0x240 [bluetooth] load_conn_param+0x4e1/0x850 [bluetooth] hci_sock_sendmsg+0x96b/0xf80 [bluetooth] Freed by task 474: kfree+0x313/0x590 hci_conn_params_clear_disabled+0x9b/0xc0 [bluetooth] load_conn_param+0x4bf/0x850 [bluetooth] hci_sock_sendmsg+0x96b/0xf80 [bluetooth]

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: extend conn_hash lookup critical sections Using RCU-protected pointers outside the critical sections without refcount is incorrect and may result to UAF. Extend critical section to cover both hci_conn_hash lookup and use of the returned conn. Add surrounding rcu_read_lock() also when return value is not used, in preparation for RCU lockdep requirement to hci_lookup_le_connect(). This avoids concurrent deletion of the conn before we are done dereferencing it. Also, make sure to hold hdev->lock when accessing hdev->accept_list.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: mgmt: fix locking in unpair_device/disconnect_sync Dereferencing RCU-protected pointers outside critical sections is invalid and may lead to UAF. Take hdev->lock for hci_conn lookup and hci_abort_conn(). Don't use RCU to ensure the conn is fully initialized at this point.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_qca: Clear memdump state on invalid dump size qca_controller_memdump() allocates qca->qca_memdump before processing the first dump packet. For a sequence-zero packet it then disables IBS, marks memdump collection active, and reads the advertised dump size. If the controller reports a zero dump size, the error path frees the local qca_memdump object and returns without clearing qca->qca_memdump or undoing the collection state. A later memdump work item initializes its local pointer from qca->qca_memdump and skips allocation when that pointer is non-NULL, so it can operate on freed memory. The stale collection and IBS-disabled flags can also leave waiters or later transmit handling blocked behind an aborted dump. Clear the saved pointer and memdump state before returning from the invalid-size path, matching the cleanup used when hci_devcd_init() fails. A static analysis checker reported the stale memdump state, and manual source review confirmed the invalid-size failure path.

In the Linux kernel, the following vulnerability has been resolved: can: raw: add locking for raw flags bitfield With commit 890e5198a6e5 ("can: raw: use bitfields to store flags in struct raw_sock") the formerly separate integer values have been integrated into a single bitfield. This led to a read-modify-write operation when changing a flag in raw_setsockopt() which now needs a locking to prevent concurrent access. Instead of adding a lock/unlock hell in each of the flag manipulations this patch introduces a wrapper for a new raw_setsockopt_locked() function analogue to the isotp_setsockopt[_locked]() approach in net/can/isotp.c [mkl: use Closes tag instead of Link]

In the Linux kernel, the following vulnerability has been resolved: s390/checksum: Fix csum_partial() without vector facility Currently csum_partial() calls csum_copy() with copy=false and dst=NULL. On machines without the vector facility, csum_copy() falls back to cksm(dst, ...), causing the checksum to be calculated from address zero instead of the source buffer. The VX implementation already checksums data loaded from src. Make the fallback do the same by passing src to cksm().

In the Linux kernel, the following vulnerability has been resolved: drm/xe/vf: Fix VF CCS attach/detach race with in-flight BO moves xe_bo_move() attaches VF CCS read/write batch buffers (BBs) to a BO after it transitions NULL/SYSTEM -> TT, and detaches them after it transitions TT -> SYSTEM. Both operations were done synchronously on the CPU immediately after building the move's copy/clear fence, without waiting for that fence to signal. This creates two races with VF migration: - Attach happens too late relative to the copy job it is meant to protect. If the copy job is submitted before the CCS BBs are attached, a VF migration event that pauses execution mid-copy can observe partially copied CCS metadata without the attach state needed to correctly save/restore it. - Detach happens too early relative to the copy job that moves data out of TT. The CCS BBs are torn down right after the copy fence is obtained, while the actual blit may still be in flight. A VF migration event that pauses execution mid-copy can then race the save/restore path against the still-running blit, and the CCS BBs it would need to make sense of the paused state have already been removed. Fix both races: - Move the attach call to before the copy/clear job is submitted, so the CCS BBs are already registered by the time the copy runs. On attach failure, unwind and bail out of the move. xe_migrate_ccs_rw_copy() now takes the destination resource explicitly, since bo->ttm.resource is not updated to the new resource until after the move commits. - Detach only after explicitly waiting for the copy fence to signal, instead of tearing down the CCS BBs immediately after obtaining it. While here, also fix xe_sriov_vf_ccs_attach_bo() to properly unwind and propagate errors: the per-context loop previously never broke out on error, silently discarding earlier failures. Unwind by clearing each attached context directly via xe_migrate_ccs_rw_copy_clear() instead of reusing xe_sriov_vf_ccs_detach_bo(), which requires both contexts to be attached before it will clean up either one. (cherry picked from commit d45ad0aa7a1eb5d7288b5ed948b05695611dc39e)

In the Linux kernel, the following vulnerability has been resolved: drm/xe/guc: Keep scheduler timeline name alive The scheduler keeps a pointer to the timeline name, but q->name is freed with the exec queue while scheduler fences can still reference it. Store the name in struct xe_guc_exec_queue so it shares the scheduler's RCU-deferred lifetime. (cherry picked from commit 41075f0eb5dcbd3b065d15f15ef7bbe9315188e8)

In the Linux kernel, the following vulnerability has been resolved: drm/xe/guc: Hold device ref until queue teardown completes GuC exec queue destruction can run asynchronously. If the final device put happens from a destroy worker, drmm cleanup can end up draining the same workqueue and deadlock. Hold a drm_device reference for the queue lifetime and drop it after queue teardown completes. This keeps drmm cleanup from running while async destroy work is still pending. Move GuC destroy work to a module-lifetime Xe workqueue and flush it on PCI remove so hot-unbind/rebind still waits for pending destroy work. With queue-held device refs, guc_submit_sw_fini() cannot run with live GuC IDs. Replace the fini wait with an assertion and remove the unused fini_wq. v2: - Rebase v3: - Switch to queue-lifetime drm_dev_get()/drm_dev_put() model. (Matt) - Queue async teardown on system_dfl_wq instead of xe->destroy_wq. (Matt) - Drop separate deferred drm_dev_put worker. - Remove stale drain_workqueue(xe->destroy_wq) from guc_submit_sw_fini(). v4: - Replace the guc_submit_sw_fini() wait with an assertion and remove the now-unused fini_wq. (sashiko) v5: - Move destroy work to a module-lifetime Xe workqueue instead of system_dfl_wq. (Matt) - Flush the module-lifetime destroy workqueue during PCI remove to preserve the old device-remove wait semantics. v6: - Keep SVM pagemap destroy work on the per-device destroy_wq to avoid letting it outlive the xe_device/drm_device. (Sashiko) - Use WQ_MEM_RECLAIM for xe->destroy_wq because SVM pagemap destroy work can be queued from the reclaim path. v7: - Drop the per-device xe->destroy_wq and use the module-level destroy WQ for SVM pagemap destroy as well. (Matt) - Rename xe_exec_queue_destroy_wq_*() helpers to xe_destroy_wq_*() helpers because the WQ is no longer exec-queue specific. (Matt) v8: - Rebase. v9: - Keep SVM pagemap destroy work on the per-device WQ_MEM_RECLAIM destroy_wq because it can be queued from reclaim and embeds the dev_pagemap used by devres teardown. (Sashiko) - Keep the module-level destroy WQ GuC-only and drop WQ_MEM_RECLAIM from it. - Update the module-WQ kdoc to document the GuC/SVM split. v10: - Keep xe->destroy_wq per-cpu while adding WQ_MEM_RECLAIM to fix the workqueue allocation warning. v11: - Drop the SVM pagemap destroy comment as it was revision-specific. (Thomas) v12: - Rebase. (cherry picked from commit da1124abac689cc2b1d8995e5f0a816f8a122edb)

In the Linux kernel, the following vulnerability has been resolved: ksmbd: pin conn during async oplock break notification smb2_oplock_break_noti() and smb2_lease_break_noti() store a ksmbd_conn pointer in an async ksmbd_work and then queue that work on ksmbd-io. The work only increments conn->r_count, which prevents teardown from passing the pending-request wait after the increment, but it does not pin the struct ksmbd_conn object. If connection teardown races with an oplock break notification, the last conn reference can be dropped before the queued worker finishes. The worker then uses the freed conn in ksmbd_conn_write() and ksmbd_conn_r_count_dec(). Take a real conn reference when publishing the conn pointer to the async work item, and drop it after the notification work has decremented r_count. Apply the same lifetime rule to lease break notification, which uses the same work->conn pattern.

In the Linux kernel, the following vulnerability has been resolved: dpll: fix NULL pointer dereference in dpll_msg_add_pin_ref_sync() When a dpll_pin is shared across multiple dpll_device instances and those devices are being unregistered (e.g. during driver module removal), a NULL pointer dereference can occur in dpll_msg_add_pin_ref_sync(). This happens under the following conditions: - A pin is registered with two or more dpll devices (dpll_A, dpll_B) - The pin has ref_sync pairs with other pins - During unregistration of dpll_A's pins, a ref_sync partner pin is unregistered first, removing it from dpll_A->pin_refs - But since the partner pin is still registered with dpll_B, its dpll_refs is not empty, so dpll_pin_ref_sync_pair_del() does NOT run and the partner stays in the pin's ref_sync_pins xarray - When the pin itself is then unregistered from dpll_A, the delete notification calls dpll_msg_add_pin_ref_sync() which finds the partner in ref_sync_pins, passes dpll_pin_available() (partner is still registered with dpll_B), but dpll_pin_on_dpll_priv(dpll_A, partner) returns NULL because partner was already removed from dpll_A->pin_refs - The NULL priv pointer is passed to the driver's ref_sync_get callback, which dereferences it BUG: kernel NULL pointer dereference, address: 0000000000000034 Oops: Oops: 0000 [#1] SMP NOPTI RIP: 0010:zl3073x_dpll_input_pin_ref_sync_get+0x73/0x80 [zl3073x] Call Trace: dpll_msg_add_pin_ref_sync+0xb8/0x200 dpll_cmd_pin_get_one+0x3b6/0x4b0 dpll_pin_event_send+0x72/0x140 __dpll_pin_unregister+0x5a/0x2b0 dpll_pin_unregister+0x49/0x70 Fix this by skipping ref_sync pins whose priv pointer cannot be resolved for the current dpll device.

In the Linux kernel, the following vulnerability has been resolved: net/sched: act_tunnel_key: Defer dst_release to RCU callback Fix a race-condition use-after-free in tunnel_key_release_params(). The function releases the metadata_dst of the old params synchronously via dst_release() while deferring the params struct free with kfree_rcu(). A concurrent tunnel_key_act() reader on the datapath may still hold the old params pointer (under rcu_read_lock_bh) and proceed to call dst_clone(&params->tcft_enc_metadata->dst) after the writer's dst_release has already pushed the dst's rcuref to RCUREF_DEAD. [email protected] produced a poc which i (and Victor) verified that KASAN reports: ================================================================== BUG: KASAN: slab-use-after-free in instrument_atomic_read_write include/linux/instrumented.h:112 BUG: KASAN: slab-use-after-free in atomic_sub_return_release include/linux/atomic/atomic-instrumented.h:326 BUG: KASAN: slab-use-after-free in __rcuref_put include/linux/rcuref.h:109 BUG: KASAN: slab-use-after-free in rcuref_put include/linux/rcuref.h:173 BUG: KASAN: slab-use-after-free in dst_release+0x5b/0x370 net/core/dst.c:168 Write of size 4 at addr ffff88806158de40 by task poc/9388 CPU: 0 UID: 0 PID: 9388 Comm: poc Tainted: G W 7.1.0-rc7 #7 PREEMPT(lazy) Tainted: [W]=WARN Hardware name: QEMU Ubuntu 25.10 PC v2 (i440FX + PIIX, + 10.1 machine, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 dump_stack_lvl+0x100/0x190 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 print_report+0x139/0x4ad mm/kasan/report.c:482 kasan_report+0xe4/0x1d0 mm/kasan/report.c:595 check_region_inline mm/kasan/generic.c:186 kasan_check_range+0x125/0x200 mm/kasan/generic.c:200 instrument_atomic_read_write include/linux/instrumented.h:112 atomic_sub_return_release include/linux/atomic/atomic-instrumented.h:326 __rcuref_put include/linux/rcuref.h:109 rcuref_put include/linux/rcuref.h:173 dst_release+0x5b/0x370 net/core/dst.c:168 refdst_drop include/net/dst.h:272 skb_dst_drop include/net/dst.h:284 skb_release_head_state+0x293/0x400 net/core/skbuff.c:1163 skb_release_all net/core/skbuff.c:1187 [..] Allocated by task 9391: kasan_save_stack+0x30/0x50 mm/kasan/common.c:57 kasan_save_track+0x14/0x30 mm/kasan/common.c:78 poison_kmalloc_redzone mm/kasan/common.c:398 __kasan_kmalloc+0x9a/0xb0 mm/kasan/common.c:415 kasan_kmalloc include/linux/kasan.h:263 __do_kmalloc_node mm/slub.c:5296 __kmalloc_noprof+0x2f1/0x830 mm/slub.c:5308 kmalloc_noprof include/linux/slab.h:954 kzalloc_noprof include/linux/slab.h:1188 offload_action_alloc+0x2f/0x130 net/core/flow_offload.c:35 tcf_action_offload_add_ex+0x1ba/0x880 net/sched/act_api.c:258 tcf_action_offload_add net/sched/act_api.c:293 tcf_action_init+0x66e/0xa20 net/sched/act_api.c:1547 tcf_action_add+0xf6/0x5d0 net/sched/act_api.c:2101 [..] Freed by task 9391: kasan_save_stack+0x30/0x50 mm/kasan/common.c:57 kasan_save_track+0x14/0x30 mm/kasan/common.c:78 kasan_save_free_info+0x3b/0x70 mm/kasan/generic.c:584 poison_slab_object mm/kasan/common.c:253 __kasan_slab_free+0x6b/0x90 mm/kasan/common.c:285 kasan_slab_free include/linux/kasan.h:235 slab_free_hook mm/slub.c:2689 slab_free mm/slub.c:6251 kfree+0x21f/0x6b0 mm/slub.c:6566 tcf_action_offload_add_ex+0x4ad/0x880 net/sched/act_api.c:284 tcf_action_offload_add net/sched/act_api.c:293 tcf_action_init+0x66e/0xa20 net/sched/act_api.c:1547 tcf_action_add+0xf6/0x5d0 net/sched/act_api.c:2101 The buggy address belongs to the object at ffff88806158de00 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 64 bytes inside of freed 256-byte region [ffff88806158de00, ffff88806158df00) The buggy address belongs to the physical page: page: refcount:0 mapcount:0 mapping:0000000000000000 index:0xffff88806158d600 pfn:0x6158c head: order:1 mapcount:0 entire_map ---truncated---

In the Linux kernel, the following vulnerability has been resolved: sctp: fix auth_hmacs array size in struct sctp_cookie The auth_hmacs array in struct sctp_cookie is supposed to store a complete SCTP_AUTH_HMAC_ALGO parameter, which consists of a struct sctp_paramhdr followed by N HMAC identifiers. However, the array size was calculated using an extra 2 bytes instead of sizeof(struct sctp_paramhdr), which is 4 bytes. When four HMAC identifiers are configured, the HMAC-ALGO parameter stored in the endpoint is larger than the auth_hmacs buffer in the cookie. As a result, sctp_association_init() copies beyond the end of auth_hmacs when initializing the association, corrupting the adjacent auth_chunks field. This can lead to an invalid HMAC identifier being accepted and later cause an out-of-bounds read in sctp_auth_get_hmac(). Fix the array size calculation by including the full SCTP parameter header size.

In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Handle partially initialized auxiliary devices bnxt_aux_devices_init() calls auxiliary_device_init() before all fields used by bnxt_aux_dev_release() are initialized. After auxiliary_device_init() succeeds, later errors must unwind with auxiliary_device_uninit(), which invokes the release callback. The release callback assumes that aux_priv->id, aux_priv->edev, edev->net and edev->ulp_tbl are all populated. If allocation fails after auxiliary_device_init(), the release path can otherwise dereference or clear partially initialized state. Allocate and attach the bnxt_en_dev and ULP table before calling auxiliary_device_init(), so the release callback only sees a fully initialized auxiliary private object. If auxiliary_device_init() itself fails, free those allocations directly because device_initialize() has not run and the release callback will not be invoked. This issue was found by a static analysis checker and confirmed by manual source review.

In the Linux kernel, the following vulnerability has been resolved: wifi: at76c50x-usb: avoid length underflow in at76_guess_freq() at76_guess_freq() checks only that the received frame is at least a bare 802.11 header (24 bytes) before subtracting the fixed management-body offset: len -= el_off; For both beacon and probe response frames, el_off is 36. If the frame is shorter than el_off, subtracting it causes the calculated IE length to wrap. The length is eventually passed to cfg80211_find_elem_match() as a very large unsigned value, so the element walk runs beyond the RX skb. This path is reached from at76_rx_tasklet() while scanning. If the device delivers a truncated beacon or probe response, the oversized IE length causes an out-of-bounds read during scanning. Skip the IE lookup if the frame does not reach the variable elements, before subtracting el_off.

In the Linux kernel, the following vulnerability has been resolved: usb: musb: omap2430: Do not put borrowed of_node in probe omap2430_probe() stores pdev->dev.of_node in a local np variable. This is a borrowed pointer and the probe function does not take a reference to it. The success and error paths nevertheless call of_node_put(np). This drops a reference that is owned by the platform device, and can leave pdev->dev.of_node with an unbalanced reference count. Do not put the borrowed platform device node from omap2430_probe(). References taken for the child MUSB device are handled by the device core, and the ctrl-module phandle reference is still released separately.

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: printer: fix infinite loop in printer_read() printer_read() uses the same variable for the requested copy size and the number of bytes actually copied to user space. copy_to_user() returns the number of bytes not copied, so when it fails to copy anything, the computed copied length becomes zero. In that case len, buf, current_rx_bytes and current_rx_buf are left unchanged. If RX data is available and the user buffer remains unwritable, the read loop can repeat indefinitely. Track the copied length separately and return -EFAULT, or the number of bytes already copied, if an iteration makes no progress.

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_ncm: validate datagram bounds in ncm_unwrap_ntb() When unpacking host-supplied NTBs, ncm_unwrap_ntb() checks datagram length against frame_max but does not verify that the datagram fits within the declared block length. Additionally, when decoding multiple NTBs from a single socket buffer, subsequent block lengths are not checked against the actual remaining buffer data. With these checks missing, a malicious USB host can specify datagram offsets and lengths that point beyond the block, or supply secondary NTB headers declaring lengths larger than the buffer. skb_put_data() then copies adjacent kernel memory from skb_shared_info into the network skb. Fix this by verifying that sufficient buffer space remains for the NTB header before parsing, handling zero-length block declarations, ensuring that block lengths never exceed the remaining buffer space, and verifying that each datagram payload stays strictly within the block boundary.

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_tcm: synchronize delayed set_alt with teardown The f_tcm set_alt() path defers endpoint setup to a work item and completes the delayed status response from process context. The delayed work uses f_tcm private state and may complete the setup request after disconnect or function teardown has already moved on. Cancel and drain the delayed set_alt work when the function is unbound or freed. For disable paths, which are reached under the composite device lock, use a small state machine and a non-sleeping cancellation path instead of cancel_work_sync(). If the work is already running, mark it cancelled and let the worker own the cleanup; otherwise tcm_disable() can cancel the queued work and clean up immediately. Also serialize the final delayed-status completion with the cancellation check while holding the composite device lock. This prevents a disconnect from clearing delayed_status while the worker is about to complete the control request. Validation reproduced this kernel report: BUG: KASAN: slab-use-after-free in tcm_delayed_set_alt+0x6c/0xef0 Call Trace: <TASK> dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 ? tcm_delayed_set_alt+0x6c/0xef0 ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x188/0x320 ? tcm_delayed_set_alt+0x6c/0xef0 kasan_report+0xe0/0x110 ? tcm_delayed_set_alt+0x6c/0xef0 tcm_delayed_set_alt+0x6c/0xef0 ? __pfx_tcm_delayed_set_alt+0x10/0x10 ? process_one_work+0x4cb/0xb90 ? rcu_is_watching+0x20/0x50 ? tcm_delayed_set_alt+0x9/0xef0 process_one_work+0x4d7/0xb90 ? __pfx_process_one_work+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __list_add_valid_or_report+0x37/0xf0 ? __pfx_tcm_delayed_set_alt+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 worker_thread+0x2d8/0x570 ? __pfx_worker_thread+0x10/0x10 kthread+0x1ad/0x1f0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x3c9/0x540 ? __pfx_ret_from_fork+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __switch_to+0x2e9/0x730 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 544: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x8f/0xa0 tcm_alloc+0x68/0x180 usb_get_function+0x36/0x60 config_usb_cfg_link+0x125/0x1b0 configfs_symlink+0x322/0x890 vfs_symlink+0xc2/0x270 filename_symlinkat+0x295/0x2f0 __x64_sys_symlinkat+0x62/0x90 do_syscall_64+0x115/0x6a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 661: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x43/0x70 kfree+0x2f9/0x530 config_usb_cfg_unlink+0x173/0x1e0 configfs_unlink+0x1fa/0x340 vfs_unlink+0x15c/0x510 filename_unlinkat+0x2ba/0x450 __x64_sys_unlinkat+0x63/0x90 do_syscall_64+0x115/0x6a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f

In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uvc: clamp SEND_RESPONSE length to the response buffer uvc_send_response() builds the UVC control response from a user-supplied struct uvc_request_data: req->length = min_t(unsigned int, uvc->event_length, data->length); ... memcpy(req->buf, data->data, req->length); req->length is clamped to uvc->event_length, which is taken from the host control request wLength (up to UVC_MAX_REQUEST_SIZE, 64), and to data->length, which comes from the UVCIOC_SEND_RESPONSE ioctl and is only checked for being negative. The source buffer data->data is only 60 bytes, so a response with uvc->event_length and data->length both greater than 60 makes memcpy() read past the end of data->data. Clamp req->length to sizeof(data->data) as well.

In the Linux kernel, the following vulnerability has been resolved: USB: serial: io_edgeport: cap received transmit credits The interrupt-status packet reports transmit credits returned by the device. edge_interrupt_callback() adds the 16-bit value to txCredits without checking maxTxCredits. edge_write() uses txCredits minus the software FIFO count as the amount of data that fits. Since the FIFO is allocated with maxTxCredits bytes, txCredits exceeding maxTxCredits can cause OOB write in ring buffer. Cap accumulated credits at maxTxCredits. Conforming devices should never hit the cap.