CVE Feed

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix ISM dc_lock deadlock during suspend [Why] System hang observed during suspend/resume while video is playing. amdgpu_dm_ism_disable() is called under dc_lock and waits for ISM delayed work via disable_delayed_work_sync(). The work handlers themselves take dc_lock, producing an ABBA deadlock when a worker is in flight at suspend time. [How] Split the disable path into two phases with opposite locking contracts: 1. amdgpu_dm_ism_disable() -- quiesces workers, must NOT hold dc_lock. 2. amdgpu_dm_ism_force_full_power() (new) -- drives the ISM FSM back to FULL_POWER_RUNNING, must hold dc_lock.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k: hif_usb: don't dereference hif_dev after re-arming firmware request ath9k_hif_request_firmware() re-arms an asynchronous firmware load via request_firmware_nowait(), passing hif_dev as the completion context, and then still dereferences hif_dev: dev_info(&hif_dev->udev->dev, "ath9k_htc: Firmware %s requested\n", hif_dev->fw_name); The re-armed callback ath9k_hif_usb_firmware_cb() runs on the "events" workqueue and, when the firmware is missing, walks the retry chain into ath9k_hif_usb_firmware_fail() -> complete_all(&hif_dev->fw_done). That releases the wait_for_completion(&hif_dev->fw_done) in a concurrent ath9k_hif_usb_disconnect(), which then kfree()s hif_dev. The trailing dev_info() in the frame that re-armed the request can therefore read freed memory (hif_dev->udev, the first field of struct hif_device_usb): BUG: KASAN: slab-use-after-free in ath9k_hif_request_firmware Read of size 8 ... by task kworker/... ath9k_hif_request_firmware ath9k_hif_usb_firmware_cb drivers/net/wireless/ath/ath9k/hif_usb.c:1247 request_firmware_work_func Allocated by ...: ath9k_hif_usb_probe drivers/net/wireless/ath/ath9k/hif_usb.c Freed by ...: ath9k_hif_usb_disconnect -> kfree drivers/net/wireless/ath/ath9k/hif_usb.c The fw_done barrier only makes disconnect wait for the firmware chain to *terminate*; it does not protect the outer ath9k_hif_request_firmware() frame that re-armed the request and keeps touching hif_dev afterwards. Drop the post-request dev_info(): it is the only use of hif_dev after the async request is armed, and it is purely informational (the dev_err() on the failure path runs only when request_firmware_nowait() did not arm a callback, so hif_dev is still alive there). This was first reported by syzbot as a single, non-reproduced crash that was later auto-obsoleted, and was independently rediscovered by the reFuzz fuzzer, which produced a C reproducer (USB-gadget connect/disconnect of an ath9k_htc device whose firmware download fails). The vulnerable code is unchanged and still present in v7.1-rc6, where the slab-use-after-free reproduces under KASAN once the (sub-microsecond) race window is widened.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix NULL pointer dereference in ath11k_hal_srng_access_begin In ATH11K_QMI_EVENT_FW_READY, ATH11K_FLAG_REGISTERED is set unconditionally even when ath11k_core_qmi_firmware_ready() fails. This leaves the driver in an inconsistent state where initialization is considered complete although the firmware ready handling did not finish successfully. During the subsequent SSR, the driver enters the restart path based on this incorrect state and dereferences uninitialized srng members, resulting in a NULL pointer dereference. Call trace: ath11k_hal_srng_access_begin+0xc/0x60 [ath11k] (P) ath11k_ce_cleanup_pipes+0x17c/0x180 [ath11k] ath11k_core_restart+0x40/0x168 [ath11k] Fix this by: - skipping firmware_ready if ATH11K_FLAG_REGISTERED is already set - setting ATH11K_FLAG_REGISTERED only when firmware_ready succeeds - setting ATH11K_FLAG_QMI_FAIL and aborting the FW_READY handling on error Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.2.0.c2-00204-QCAMSLSWPLZ-1

In the Linux kernel, the following vulnerability has been resolved: hwmon: (corsair-cpro) Stop device IO before calling hid_hw_stop Calling hid_hw_stop() does not stop the device IO. This results in a race condition between hid_input_report() and the point immediately following the execution of hid_device_io_start() within the driver probe function. If the probe operation fails after "io start" has been initiated, this race condition will result in a UAF vulnerability. Fix the problem by calling hid_device_io_stop() before calling hid_hw_stop().

In the Linux kernel, the following vulnerability has been resolved: hwmon: (nzxt-kraken3) Stop device IO before calling hid_hw_stop Calling hid_hw_stop() does not stop the device IO. This results in a race condition between hid_input_report() and the point immediately following the execution of hid_device_io_start() within the driver probe function. If the probe operation fails after "io start" has been initiated, this race condition will result in a UAF vulnerability. Fix the problem by calling hid_device_io_stop() before calling hid_hw_stop().

In the Linux kernel, the following vulnerability has been resolved: watchdog: airoha: Prevent division by zero when clock frequency is zero clk_get_rate() can return 0 when the clock provider is not properly configured or the clock is unmanaged. The driver uses wdt_freq as a divisor directly in airoha_wdt_probe() to compute max_timeout and in airoha_wdt_get_timeleft() to compute the remaining time, which results in a division by zero. Add a check for wdt_freq == 0 in probe and return -EINVAL with dev_err_probe() to prevent the division by zero and provide a diagnostic message.

In the Linux kernel, the following vulnerability has been resolved: firewire: net: Fix fragmented datagram reassembly fwnet_frag_new() keeps a sorted list of received fragments for a partial datagram. When a new fragment is adjacent to an existing fragment, the code checks whether the new fragment also closes the gap to the next or previous list entry. Those neighbor lookups currently assume that the current fragment always has a real next or previous fragment. At a list edge, the next or previous entry is the list head, not a struct fwnet_fragment_info. The gap checks also compare against the old edge of the current fragment instead of the edge after adding the new fragment. As a result, a fragment that bridges two existing ranges may leave two adjacent ranges unmerged, so fwnet_pd_is_complete() can miss a complete datagram. Check for the list head before looking up the neighboring fragment, and compare the neighbor against the new fragment's far edge when deciding whether to merge all three ranges. This issue was found by a static analysis checker and confirmed by manual source review.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath6kl: fix OOB read from firmware num_msg in TX complete handler The firmware-controlled num_msg field (u8, 0-255) drives the loop in ath6kl_wmi_tx_complete_event_rx() without validation against the buffer length. This allows out-of-bounds reads of up to 1020 bytes past the WMI event buffer when the firmware sends an inflated num_msg. Add a check that the buffer is large enough to hold the fixed struct and the num_msg variable-length entries.

In the Linux kernel, the following vulnerability has been resolved: wifi: ath6kl: fix OOB read from firmware IE lengths in connect event The firmware-controlled beacon_ie_len, assoc_req_len, and assoc_resp_len fields in ath6kl_wmi_connect_event_rx() are not validated against the buffer length. Their sum (up to 765) can exceed the actual WMI event data, causing out-of-bounds reads during IE parsing and state corruption of wmi->is_wmm_enabled. Add a check that the total IE length fits within the buffer.

In the Linux kernel, the following vulnerability has been resolved: wifi: carl9170: bound memcpy length in cmd callback to prevent OOB read When the firmware sends a command response with a length mismatch, carl9170_cmd_callback() logs the mismatch and calls carl9170_restart() but then falls through to memcpy(ar->readbuf, buffer + 4, len - 4). Since len comes from the firmware and can exceed ar->readlen, this copies more data than the readbuf was allocated for. Bound the memcpy to min(len - 4, ar->readlen) so that the response is still completed -- avoiding repeated restarts from queued garbage -- while preventing an overread past the response buffer.

In the Linux kernel, the following vulnerability has been resolved: wifi: carl9170: fix OOB read from off-by-two in TX status handler The bounds check in carl9170_tx_process_status() uses `i > ((cmd->hdr.len / 2) + 1)` which is off by two, allowing 2 extra iterations past valid _tx_status entries when the firmware- controlled hdr.ext exceeds hdr.len/2. Fix by using the correct comparison `i >= (cmd->hdr.len / 2)`.

In the Linux kernel, the following vulnerability has been resolved: wifi: carl9170: fix buffer overflow in rx_stream failover path The failover continuation in carl9170_rx_stream() copies the full tlen from the second USB transfer instead of capping at rx_failover_missing bytes. When both transfers are near maximum size, the total exceeds the 65535-byte failover SKB, triggering skb_over_panic. Limit the copy size to the missing byte count. [Fix checkpatch CHECK:PARENTHESIS_ALIGNMENT]

In the Linux kernel, the following vulnerability has been resolved: ASoC: tas2781: bound firmware description string parsing The TAS2781 firmware parser reads several variable-length description strings with strlen() before checking that the string terminator is present inside the firmware blob. A malformed firmware image without a NUL terminator can therefore make the parser walk past the end of the firmware buffer before the later size checks run. Add a small bounded string-length helper and use it for all description fields that are parsed from the firmware buffer. Keep the existing size checks for the fixed bytes that follow each string.

In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Fix IRQ unsafe locking in gdom allocation Lockdep complains: [ 259.410489] ===================================================== [ 259.417287] WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected [ 259.424667] 7.0.0-g51db1d8d2113 #54 Not tainted [ 259.429718] ----------------------------------------------------- [ 259.436516] qemu-system-x86/10143 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: [ 259.444670] ff3b2b1c60305170 (&xa->xa_lock#25){+.+.}-{3:3}, at: __domain_flush_pages+0x17c/0x4b0 [ 259.454485] and this task is already holding: [ 259.460991] ff3b2b1c98504cc0 (&domain->lock){-.-.}-{3:3}, at: amd_iommu_iotlb_sync+0x25/0x60 [ 259.470408] which would create a new lock dependency: [ 259.476041] (&domain->lock){-.-.}-{3:3} -> (&xa->xa_lock#25){+.+.}-{3:3} [ 259.483615] but this new dependency connects a HARDIRQ-irq-safe lock: [ 259.492447] (&domain->lock){-.-.}-{3:3} [ 259.492449] ... which became HARDIRQ-irq-safe at: [ 259.503705] lock_acquire+0xb6/0x2e0 [ 259.507790] _raw_spin_lock_irqsave+0x3e/0x60 [ 259.512748] amd_iommu_flush_iotlb_all+0x20/0x50 [ 259.517996] iommu_dma_free_iova.isra.0+0x1b8/0x1e0 [ 259.523534] __iommu_dma_unmap+0xc2/0x140 [ 259.528100] iommu_dma_unmap_phys+0x55/0xc0 [ 259.532863] dma_unmap_phys+0x274/0x2e0 [ 259.537238] dma_unmap_page_attrs+0x17/0x30 [ 259.542000] nvme_unmap_data+0x13e/0x280 [ 259.546473] nvme_pci_complete_batch+0x45/0x70 [ 259.551524] nvme_irq+0x83/0x90 [ 259.555123] __handle_irq_event_percpu+0x92/0x360 [ 259.560466] handle_irq_event+0x39/0x80 [ 259.564841] handle_edge_irq+0xb2/0x1a0 [ 259.569214] __common_interrupt+0x4e/0x130 [ 259.573882] common_interrupt+0x88/0xa0 [ 259.578256] asm_common_interrupt+0x27/0x40 [ 259.583019] cpuidle_enter_state+0x119/0x5d0 [ 259.587877] cpuidle_enter+0x2e/0x50 [ 259.591962] do_idle+0x153/0x2c0 [ 259.595657] cpu_startup_entry+0x29/0x30 [ 259.600128] start_secondary+0x118/0x150 [ 259.604601] common_startup_64+0x13e/0x141 [ 259.609266] to a HARDIRQ-irq-unsafe lock: [ 259.615384] (&xa->xa_lock#25){+.+.}-{3:3} [ 259.615386] ... which became HARDIRQ-irq-unsafe at: [ 259.627039] ... [ 259.627039] lock_acquire+0xb6/0x2e0 [ 259.633071] _raw_spin_lock+0x2f/0x50 [ 259.637250] amd_iommu_alloc_domain_nested+0x140/0x3c0 [ 259.643078] iommufd_hwpt_alloc+0x272/0x800 [iommufd] [ 259.648813] iommufd_fops_ioctl+0x14e/0x200 [iommufd] [ 259.654547] __x64_sys_ioctl+0x9d/0xf0 ... Since amd_iommu_domain_flush_pages() necessarily holds domain->lock to do the flush, switch the allocation side in gdom_info_load_or_alloc_locked() to HARDIRQ-safe allocation. The IOMMU_DESTROY->free path has the same issue, so switch that path to HARDIRQ-safe locking as well.

In the Linux kernel, the following vulnerability has been resolved: ALSA: hda: cs35l41: validate and free ACPI mute object cs35l41_get_acpi_mute_state() evaluates a _DSM method to get the ACPI mute state and reads the first byte from the returned object. However, the returned ACPI object is owned by the caller and is never freed after use, so each successful query leaks the _DSM result object. The code also assumes that the returned object is a buffer with at least one byte. A malformed firmware response can return a different object type or an empty buffer, and the direct ret->buffer.pointer dereference can then access an invalid pointer. Use the typed _DSM helper, validate that the returned buffer contains at least one byte, and free the ACPI object after reading it.

In the Linux kernel, the following vulnerability has been resolved: arm_mpam: guard MBWU state before adding it to garbage __destroy_component_cfg() adds each RIS mbwu_state object to the MPAM garbage list when destroying component configuration. However, mbwu_state is allocated per RIS and only for RISes with MBWU monitors. A component can therefore have comp->cfg allocated while some RISes still have ris->mbwu_state set to NULL. Passing a NULL mbwu_state to add_to_garbage() dereferences the NULL pointer inside the macro. Skip RISes that do not have an mbwu_state object before adding them to the garbage list.

In the Linux kernel, the following vulnerability has been resolved: smb: client: validate DFS referral PathConsumed parse_dfs_referrals() validates that the response contains the fixed referral entry array and, on for-next, the per-referral string offsets. However, the response also contains a PathConsumed value that is later used for DFS path parsing. If a malformed response provides a PathConsumed value larger than the search name, later DFS parsing can advance beyond the end of the path. Validate PathConsumed against the search name length before storing it in the parsed referral.

In the Linux kernel, the following vulnerability has been resolved: ovpn: avoid putting unrelated P2P peer on socket release ovpn_peer_release_p2p() is called when an OVPN UDP socket is being destroyed. It checks the currently published P2P peer and releases it only if that peer still uses the socket being destroyed. A peer replacement can publish a new peer before the old UDP socket is destroyed. When the old socket destruction path runs afterwards, ovpn_peer_release_p2p() observes the new peer through ovpn->peer. Since the new peer uses a different socket, the function takes the socket mismatch branch. That branch still calls ovpn_peer_put(peer). At this point, however, peer is the currently published replacement peer, not the peer associated with the socket being destroyed. Dropping its reference can free it while ovpn->peer still points to it, leading to later use-after-free accesses from the peer and socket cleanup paths. KASAN reports this as a slab-use-after-free on the kmalloc-1k ovpn_peer object. In the reproducer, the object is allocated from ovpn_peer_new() via ovpn_nl_peer_new_doit(), and freed through ovpn_peer_release_rcu() from RCU callback processing. Observed access sites include ovpn_peer_remove(), ovpn_socket_release(), ovpn_nl_peer_del_notify(), and unlock_ovpn(). Fix this by returning from the socket mismatch branch without putting the peer.

In the Linux kernel, the following vulnerability has been resolved: ovpn: fix use after free in unlock_ovpn() unlock_ovpn() iterates over the release_list using llist_for_each_entry() and drops the peer reference inside the loop body via ovpn_peer_put(). If this drops the last reference, the peer is eventually freed. However, llist_for_each_entry() reads peer->release_entry.next in the loop advance expression, which runs after the body. By that time the peer may have already been freed, resulting in a use after free when advancing to the next list entry. Fix this by using llist_for_each_entry_safe(), which caches the next pointer before executing the loop body.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: validate Realtek vendor event length btusb_recv_event_realtek() reads the event code at data[0] and the Realtek subevent code at data[2] before deciding whether to consume a vendor event as a coredump. For example, the two-byte event ff 00 contains a complete vendor-event header declaring zero parameters. The old classifier still reads a nonexistent third byte and can misclassify the event as a coredump if the adjacent byte is 0x34. Require the HCI event header and first parameter to be present before inspecting the Realtek subevent code. Short events continue through the normal HCI receive path, which owns their protocol validation.

In the Linux kernel, the following vulnerability has been resolved: net/packet: avoid fanout hook re-registration after unregister packet_set_ring() temporarily detaches a socket from packet delivery while reconfiguring its ring. It records the previous running state, clears po->num, unregisters the protocol hook when needed, drops po->bind_lock, and later restores po->num and re-registers the hook from the saved was_running value. That unlocked window can race with NETDEV_UNREGISTER. The notifier can observe the socket as not running, skip __unregister_prot_hook(), and invalidate the per-socket binding by setting po->ifindex to -1 and clearing po->prot_hook.dev. A one-member fanout group can still retain its shared fanout hook device pointer. When packet_set_ring() resumes, re-registering solely from the stale was_running state can re-add the fanout hook after the device has been unregistered. Treat po->ifindex == -1 as an invalidated binding after reacquiring po->bind_lock. This is distinct from ifindex 0, the normal unbound/wildcard state: ifindex -1 marks an existing device binding that was invalidated when the device was unregistered. Restore po->num as before, but do not re-register the hook if device unregister already detached the socket.

In the Linux kernel, the following vulnerability has been resolved: bpf: Reject redirect helpers without a bpf_net_context The bpf_redirect*() helpers and skb_do_redirect() obtain the per-task bpf_redirect_info via bpf_net_ctx_get_ri(), which dereferences the current->bpf_net_context unconditionally. That context is established on the paths that run tc BPF such as sch_handle_{ingress,egress}(), *except* for the case where {cls,act}_bpf was attached to a proper qdisc. A program running from there reaches the NULL deref in two ways: * It calls bpf_redirect() directly, which dereferences the context at the top of the helper: tc qdisc add dev eth0 root handle 1: red limit 1MB min 10KB max 20KB \ avpkt 1000 burst 100 qevent early_drop block 10 tc filter add block 10 pref 1 bpf obj redirect.o * It simply returns TC_ACT_REDIRECT without helper call: tcf_qevent_handle() then dispatches to skb_do_redirect(), which dereferences the context Rather than extending bpf_net_context management into the qdisc path, make the redirect helpers refuse to operate when no context exists, and have tcf_qevent_handle() drop a TC_ACT_REDIRECT verdict instead of calling skb_do_redirect(). Previous behaviour was a crash, so nothing regresses by not supporting it.

In the Linux kernel, the following vulnerability has been resolved: rds: drop incoming messages that cross network namespace boundaries rds_find_bound() looks up the destination socket using a global rhashtable keyed solely on (addr, port, scope_id). Network namespaces are not part of the key, so a sender in netns A can deliver an incoming message (inc) to a socket that lives in a different netns B. When this happens, inc->i_conn points to an rds_connection whose c_net is netns A, but the receiving rs lives in netns B. Once the child process that created netns A exits, cleanup_net() calls rds_loop_exit_net() -> rds_loop_kill_conns() -> rds_conn_destroy(), freeing that connection. If the survivor socket in netns B still holds the inc, any subsequent dereference of inc->i_conn is a use-after-free. There are two dangerous sites in rds_clear_recv_queue(): 1. inc->i_conn->c_lcong (offset 88 of freed rds_connection, size 200) read via rds_recv_rcvbuf_delta() -- confirmed by KASAN. 2. inc->i_conn->c_trans->inc_free(inc) (function pointer at offset 80) called via rds_inc_put() when the inc refcount reaches zero -- same race window, potential call-through-freed-object primitive. The bug is reachable from unprivileged user namespaces (CLONE_NEWUSER + CLONE_NEWNET), available since Linux 3.8. Fix this by rejecting the delivery in rds_recv_incoming() when the socket returned by rds_find_bound() belongs to a different network namespace than the connection that carried the message. Use the existing rds_conn_net() / sock_net() helpers and net_eq() for the comparison.

In the Linux kernel, the following vulnerability has been resolved: rxrpc: fix io_thread race in rxrpc_wake_up_io_thread() rxrpc_wake_up_io_thread() checks local->io_thread before waking it, but then reloads the pointer for wake_up_process(). local->io_thread is cleared with WRITE_ONCE() when the I/O thread exits, so the second load can see NULL even if the first load did not. Take a READ_ONCE() snapshot and use it for both the NULL check and the wake_up_process() call, as rxrpc_encap_rcv() already does.

In the Linux kernel, the following vulnerability has been resolved: dpaa2-switch: put MAC endpoint device on disconnect fsl_mc_get_endpoint() returns the MAC endpoint device with a reference taken through device_find_child(). The switch port connect path stores that device in mac->mc_dev and keeps it for the lifetime of the connected MAC object. However, the disconnect path only closes the MAC and frees the dpaa2_mac object. It does not drop the endpoint device reference stored in mac->mc_dev, so every successful connect leaks that device reference when the MAC is later disconnected. Drop the endpoint device reference before freeing the dpaa2_mac object.

In the Linux kernel, the following vulnerability has been resolved: net: airoha: Fix potential use-after-free in airoha_ppe_deinit() airoha_ppe_deinit() replaces the NPU pointer with NULL via rcu_replace_pointer() but does not wait for existing RCU readers to exit before calling ppe_deinit() and airoha_npu_put(). This can cause a use-after-free if a reader in an RCU read-side critical section still holds a reference to the NPU when it is freed. The init path (airoha_ppe_init) already calls synchronize_rcu() after rcu_assign_pointer(), but the deinit path introduced in commit 6abcf751bc08 ("net: airoha: Fix schedule while atomic in airoha_ppe_deinit()") omitted the matching barrier when switching from rcu_read_lock()/rcu_dereference() to rcu_replace_pointer(). Add synchronize_rcu() before ppe_deinit() to ensure all existing RCU readers have completed before the NPU resources are released.

In the Linux kernel, the following vulnerability has been resolved: dpaa2-eth: put MAC endpoint device on disconnect fsl_mc_get_endpoint() returns the MAC endpoint device with a reference taken through device_find_child(). The Ethernet connect path stores that device in mac->mc_dev and keeps it for the lifetime of the connected MAC object. However, the disconnect path only disconnects and closes the MAC before freeing the dpaa2_mac object. It does not drop the endpoint device reference stored in mac->mc_dev, so every successful connect leaks that device reference when the MAC is later disconnected. Drop the endpoint device reference after closing the MAC and before freeing the dpaa2_mac object.

In the Linux kernel, the following vulnerability has been resolved: net: airoha: Fix DMA direction for NPU mailbox buffer airoha_npu_send_msg() always maps the mailbox buffer with DMA_TO_DEVICE, but some callers expect the NPU to write response data back into the same buffer: - airoha_npu_wlan_msg_get() (NPU_OP_GET): NPU writes response into the buffer, then the caller reads it via memcpy() - airoha_npu_ppe_stats_setup() (NPU_OP_SET): NPU writes back npu_stats_addr field in the response On non-cache-coherent architectures like EN7581 (Cortex-A53 without hardware cache coherency for NPU DMA), DMA_TO_DEVICE unmap is a no-op — it does not invalidate the CPU cache. If the NPU-written cache line is still present in the CPU cache when the caller reads the buffer, the CPU observes stale data instead of the NPU response. This is a timing-sensitive bug: small mailbox buffers (~24 bytes) typically fit in a single cache line and may survive in the cache until the caller reads them, producing silent data corruption rather than a crash. The bug is more likely to trigger when the caller reads the response immediately after dma_unmap_single() without intervening cache-evicting operations. Fix by using DMA_BIDIRECTIONAL for both map and unmap, which ensures dma_unmap_single() invalidates the CPU cache on non-coherent systems. The mailbox buffers are small so there is no performance concern.

In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Wait for completion instead of returning early in iommu_completion_wait() need_sync is a per-IOMMU flag shared by all domains and devices behind that IOMMU. It is set whenever a command is queued with sync == true and cleared when a completion-wait (CWAIT) command is queued. However, a cleared need_sync only means that a covering CWAIT has been queued, not that all previously queued commands have actually completed in hardware. iommu_completion_wait() read need_sync locklessly and returned early when it was false. This breaks the "block until all previously queued commands have completed" contract in a multi-CPU scenario: CPU2: queue inv-B => need_sync = true CPU1: queue CWAIT(N); need_sync = false; then wait_on_sem(N) CPU2: read need_sync == false => return 0 (no wait!) CPU2 returns without waiting for any sequence number even though its inv-B may not have completed yet (CWAIT(N), queued after inv-B, has not been signaled). CPU2 then proceeds to, for example, free page-table pages while the IOMMU can still walk stale translations, opening a use-after-free window. This is a logical race in the meaning of the flag, not a memory-visibility issue, so barriers alone do not help. Fix it without losing the optimization of avoiding redundant CWAIT commands: take iommu->lock before testing need_sync, and when it is false do not return early but wait for the last allocated sequence number (cmd_sem_val). Since need_sync == false implies no sync command was queued after the last CWAIT, that CWAIT is FIFO-ordered after every not-yet-completed command, so waiting for its sequence number guarantees all prior commands (possibly queued by another CPU) have completed. The common path with pending work is unchanged and no extra hardware command is issued.

In the Linux kernel, the following vulnerability has been resolved: nfp: Check resource mutex allocation nfp_cpp_resource_find() allocates a CPP mutex handle for the matching resource-table entry and then reports success. nfp_resource_try_acquire() immediately passes that handle to nfp_cpp_mutex_trylock(). However, nfp_cpp_mutex_alloc() returns NULL on failure. If that happens for a matching table entry, the resource lookup still returns success and the following trylock dereferences a NULL mutex pointer while opening the resource. nfp_resource_acquire() already treats failure to allocate the table mutex as -ENOMEM. Do the same for the resource mutex and fail the lookup before publishing the rest of the resource handle. This issue was found by a static analysis checker and confirmed by manual source review.

In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Bound the early ACPI HID map The ivrs_acpihid command-line parser appends entries to a fixed four-element early_acpihid_map array. Unlike the sibling IOAPIC and HPET parsers, it does not reject a fifth entry before incrementing the map size. Check the capacity at the common found label before parsing the HID and UID or writing the entry.

In the Linux kernel, the following vulnerability has been resolved: iommu/intel: Fix out-of-bounds memset in dmar_latency_disable() dmar_latency_disable() intends to zero out only the single latency_statistic entry for the given type, but the memset size was computed as sizeof(*lstat) * DMAR_LATENCY_NUM, which clears the entire array starting from &lstat[type]. When type > 0, this writes beyond the end of the allocated array, corrupting adjacent memory. Fix by using sizeof(*lstat) to clear only the target entry.

In the Linux kernel, the following vulnerability has been resolved: tipc: serialize udp bearer replicast list updates tipc_udp_rcast_add() and cleanup_bearer() both update ub->rcast.list with list_add_rcu() / list_del_rcu(), but nothing serializes them. The add runs from the encap receive softirq (via tipc_udp_rcast_disc()) without rtnl_lock(), so it can race the cleanup delete and corrupt the list: list_del corruption. prev->next should be ffff8880298d7ab8, but was ffff88802449ad38. (prev=ffff888027e3ec98) kernel BUG at lib/list_debug.c:62! RIP: __list_del_entry_valid_or_report+0x17a/0x200 Workqueue: events cleanup_bearer Call Trace: cleanup_bearer (net/tipc/udp_media.c:811) process_one_work (kernel/workqueue.c:3302) worker_thread (kernel/workqueue.c:3466) The bearer can be enabled from an unprivileged user namespace, as the TIPCv2 generic-netlink ops carry no GENL_ADMIN_PERM. Add a spinlock to struct udp_bearer and take it around the list_add_rcu() in tipc_udp_rcast_add() and the list_del_rcu() loop in cleanup_bearer() so the two writers can no longer corrupt the list. Reject a duplicate peer under the same lock before allocating, and remove tipc_udp_is_known_peer(). The old lockless pre-check in tipc_udp_rcast_disc() was racy: two softirqs discovering the same peer could both find it absent and add it twice. cleanup_bearer() runs from a workqueue after tipc_udp_disable() clears the bearer's up bit, so an encap softirq can still reach tipc_udp_rcast_add() and add a peer after cleanup_bearer() has already emptied the list, leaking that entry when the bearer is freed. Mark the bearer disabled under rcast_lock once the list is emptied and refuse further additions.

In the Linux kernel, the following vulnerability has been resolved: rds: Fix inet6_addr_lst NULL dereference when IPv6 is disabled When booting with the 'ipv6.disable=1' parameter, inet6_addr_lst is never initialized because inet6_init() exits before addrconf_init() is called to initialize it. An attempt to bind an RDS socket to an ipv6 address results in a crash in __ipv6_chk_addr_and_flags() KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] RIP: 0010:__ipv6_chk_addr_and_flags+0x1df/0x7e0 Call Trace: <TASK> ipv6_chk_addr+0x3b/0x50 rds_tcp_laddr_check+0x155/0x3b0 [rds_tcp] rds_trans_get_preferred+0x15d/0x2d0 [rds] ? trace_hardirqs_on+0x2d/0x110 rds_bind+0x1433/0x1d60 [rds] ? rds_remove_bound+0xd50/0xd50 [rds] ? aa_af_perm+0x250/0x250 ? __might_fault+0xde/0x190 ? __sys_bind+0x1dc/0x210 __sys_bind+0x1dc/0x210 ? __ia32_sys_socketpair+0x100/0x100 ? restore_fpregs_from_fpstate+0x53/0x100 __x64_sys_bind+0x73/0xb0 ? syscall_enter_from_user_mode+0x1c/0x50 do_syscall_64+0x34/0x80 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 RIP: 0033:0x7f47f8269ea9 </TASK> The following code reproduces the issue: struct sockaddr_in6 addr; s = socket(PF_RDS, SOCK_SEQPACKET, 0); memset(&addr, 0, sizeof(addr)); inet_pton(AF_INET6, ADDRESS, &addr.sin6_addr); addr.sin6_family = AF_INET6; addr.sin6_port = htons(PORT); bind(s, &addr, sizeof(addr)); Found by InfoTeCS on behalf of Linux Verification Center (linuxtesting.org) with Syzkaller.

In the Linux kernel, the following vulnerability has been resolved: net: txgbe: fix FDIR filter leak on remove Perfect FDIR filters can be added while the interface is down and are kept on the software list for later restore. unregister_netdev() only calls ndo_stop when the device is up, so txgbe_fdir_filter_exit() in txgbe_close() is skipped in that case and the filters are leaked on driver remove. Free the filter list from txgbe_remove() as well.

In the Linux kernel, the following vulnerability has been resolved: sctp: fix auth_chunk_list capacity check in sctp_auth_ep_add_chunkid sctp_auth_ep_add_chunkid() uses SCTP_NUM_CHUNK_TYPES (20) as the capacity limit for ep->auth_chunk_list, allowing it to hold up to 20 chunk entries (param_hdr.length up to 24). However, the copy destination asoc->c.auth_chunks in struct sctp_cookie is only SCTP_AUTH_MAX_CHUNKS (16) entries (20 bytes). When more than 16 chunks are added, sctp_association_init() memcpy overflows the destination by up to 4 bytes. Fix by using SCTP_AUTH_MAX_CHUNKS as the capacity limit, matching the destination capacity.

In the Linux kernel, the following vulnerability has been resolved: pds_core: fix deadlock between reset thread and remove pci_reset_function() acquires device_lock before performing the reset. pdsc_remove() is called by the PCI core with device_lock already held. If pdsc_pci_reset_thread() is running when pdsc_remove() is called, destroy_workqueue() will block waiting for the work to complete, while the work is blocked waiting for device_lock - deadlock. Use pci_try_reset_function() which uses pci_dev_trylock() internally. This acquires both the device lock and the PCI config access lock without blocking - if either lock is contended, it returns -EAGAIN immediately. This avoids the deadlock while also ensuring proper config space access serialization during the reset. The pci_dev_get/put calls are also removed as they were unnecessary - the driver-owned workqueue is destroyed in pdsc_remove(), guaranteeing the work completes before remove returns. The PCI core holds its reference to pci_dev throughout the entire unbind sequence.

In the Linux kernel, the following vulnerability has been resolved: pds_core: fix use-after-free on workqueue during remove In pdsc_remove(), the workqueue is destroyed before pdsc_teardown() is called. This ordering allows two paths to queue work on the destroyed workqueue: 1. If pdsc_teardown() -> pdsc_devcmd_reset() times out, the error path in pdsc_devcmd_locked() queues health_work. 2. A NotifyQ event can trigger the ISR and queue work before free_irq() is called in pdsc_teardown(). Fix by moving destroy_workqueue() after pdsc_teardown() so the workqueue outlives every queuer; destroy_workqueue() then flushes any work still pending. Draining the queued work also requires ordering the teardown so the resources that work touches are freed last: - In pdsc_qcq_free(), after freeing the interrupt, cancel_work_sync() the queue's work and only then clear qcq->intx, so pdsc_process_adminq()'s read of qcq->intx for interrupt-credit return cannot race with the clear. - Free adminqcq before notifyqcq: the shared adminq ISR is released when adminqcq is freed, and the adminq work accesses notifyqcq, so both must be stopped before notifyqcq is freed.

In the Linux kernel, the following vulnerability has been resolved: pds_core: fix auxiliary device add/del races Two paths add or delete the same slot (pf->vfs[vf_id].padev): a VF's pdsc_reset_done() and the PF's devlink enable_vnet/disable_vnet handler. They serialize on config_lock, but neither guards the slot under it correctly. add() registers and stores a new auxiliary device without first checking the slot, so a second add of an already-populated slot leaks the first device. del() makes that check outside config_lock, so two concurrent dels can both pass it; the first clears the slot, and the second dereferences a NULL pointer. Check and update the slot under config_lock in both paths.

In the Linux kernel, the following vulnerability has been resolved: accel: ethosu: Fix element size accounting for cmd stream validation There are 2 issues with the element size handling in the command stream validation which result in too small of a size calculated when the element size is 16/32/64 bits. For NHWC format, the element size is simply missing from the calculation. The bitfield for the element size is different between IFM/IFM2 and OFM. IFM and IFM2 encode the precision in parameter bits 2:3, while OFM uses bits 1:2.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: connac: fix possible NULL-pointer deref in mt76_connac_mcu_uni_bss_he_tlv() mt76_connac_get_he_phy_cap routine can theoretically return NULL so check cap pointer before dereferencing it.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: check pointer returned by mt76_connac_get_he_phy_cap() mt76_connac_get_he_phy_cap routine can theoretically return NULL so check cap pointer before dereferencing it.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: fix crash in reset link replay During reset recovery, mt7925_vif_connect_iter() replays firmware state for links tracked in mvif->valid_links. After MLO link changes or MCU timeout recovery, the driver bitmap can temporarily contain a link whose mac80211 bss_conf has already gone away. This can pass a NULL bss_conf to mt76_connac_mcu_uni_add_dev(), matching the crash where x1, the second argument, is NULL: pc : mt76_connac_mcu_uni_add_dev+0x8c/0x1f8 [mt76_connac_lib] lr : mt7925_vif_connect_iter+0x9c/0x168 [mt7925_common] x2 : ffffff80a77f6018 x1 : 0000000000000000 x0 : ffffff8099402080 Call trace: mt76_connac_mcu_uni_add_dev+0x8c/0x1f8 [mt76_connac_lib] mt7925_vif_connect_iter+0x9c/0x168 [mt7925_common] mt7925_mac_reset_work+0x264/0x2f8 [mt7925_common] Skip missing bss_conf entries before replaying the link. Non-MLO AP/STA reset replay is unchanged because the helper still returns &vif->bss_conf for the legacy link.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: fix possible NULL-pointer deref in mt7996_mcu_sta_bfer_eht() mt76_connac_get_eht_phy_cap routine can theoretically return NULL so check cap pointer before dereferencing it.

In the Linux kernel, the following vulnerability has been resolved: drm/xe/vf: Add drm_dev guards when detaching CCS read/write buffers CCS read/write buffers are freed during BO destruction. In some cases, BOs may be destroyed after the device is unbound but while the DRM structure remains valid, leading to NULL pointer dereferences when accessing device resources. BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP NOPTI CPU: 0 UID: 0 PID: 9376 Comm: xe_pat Not tainted 7.2.0-rc2+ #1 PREEMPT(lazy) RIP: 0010:xe_sriov_vf_ccs_rw_update_bb_addr+0x4d/0xa0 [xe] RSP: 0018:ffffcf304110b9c8 EFLAGS: 00010246 RAX: ffff8a85c38a0a00 RBX: 00000000810ef000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8a85c39c1888 RBP: ffffcf304110b9e8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8a85c39c1888 R13: 0000000000000000 R14: ffff8a85c39b4f28 R15: ffff8a85c3885000 FS: 0000000000000000(0000) GS:ffff8a878b809000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000010314a002 CR4: 0000000000772ef0 PKRU: 55555554 Call Trace: <TASK> xe_migrate_ccs_rw_copy_clear+0x98/0x120 [xe] xe_sriov_vf_ccs_detach_bo+0x2c/0x60 [xe] xe_ttm_bo_delete_mem_notify+0xc8/0xe0 [xe] ttm_bo_cleanup_memtype_use+0x26/0x80 [ttm] ttm_bo_release+0x29e/0x2d0 [ttm] ttm_bo_fini+0x39/0x70 [ttm] xe_gem_object_free+0x1f/0x30 [xe] drm_gem_object_free+0x1d/0x40 ttm_bo_vm_close+0x5f/0x90 [ttm] remove_vma+0x2c/0x70 tear_down_vmas+0x63/0xf0 exit_mmap+0x20d/0x3f0 __mmput+0x45/0x170 mmput+0x31/0x40 do_exit+0x2ba/0xac0 do_group_exit+0x2d/0xb0 __x64_sys_exit_group+0x18/0x20 x64_sys_call+0x14a0/0x2390 do_syscall_64+0xdd/0x640 ? count_memcg_events+0xea/0x240 ? handle_mm_fault+0x1ec/0x2f0 (cherry picked from commit 1ae415a6eefe5004954a1d352b1718faca8844ef)

In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: fix 802.1X-SHA256 call trace warning Based on wpa_auth as 1x_256 mode, need to set up "use_fwsup" with BRCMF_PROFILE_FWSUP_1X. Or it will happen trace warning when call brcmf_cfg80211_set_pmk(). [ 4481.831101] ------------[ cut here ]------------ [ 4481.831102] WARNING: CPU: 1 PID: 2997 at drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:7242 brcmf_cfg80211_set_pmk+0x77/0xd0 [brcmfmac] [...] [ 4481.831202] Call Trace: [ 4481.831204]  <TASK> [ 4481.831205]  nl80211_set_pmk+0x183/0x250 [cfg80211] [ 4481.831233]  genl_family_rcv_msg_doit+0xea/0x150 [ 4481.831237]  genl_rcv_msg+0x104/0x240 [ 4481.831239]  ? cfg80211_probe_status+0x2c0/0x2c0 [cfg80211] [ 4481.831257]  ? genl_family_rcv_msg_doit+0x150/0x150 [ 4481.831259]  netlink_rcv_skb+0x4e/0x100 [ 4481.831261]  genl_rcv+0x24/0x40 [ 4481.831262]  netlink_unicast+0x236/0x380 [ 4481.831264]  netlink_sendmsg+0x250/0x4b0 [ 4481.831266]  sock_sendmsg+0x5c/0x70 [ 4481.831269]  ____sys_sendmsg+0x236/0x2b0 [ 4481.831271]  ? copy_msghdr_from_user+0x6d/0xa0 [ 4481.831272]  ___sys_sendmsg+0x86/0xd0 [ 4481.831274]  ? avc_has_perm+0x8c/0x1a0 [ 4481.831276]  ? preempt_count_add+0x6a/0xa0 [ 4481.831279]  ? sock_has_perm+0x82/0xa0 [ 4481.831280]  __sys_sendmsg+0x57/0xa0 [ 4481.831282]  do_syscall_64+0x38/0x90 [ 4481.831284]  entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 4481.831286] RIP: 0033:0x7fd270d369b4

In the Linux kernel, the following vulnerability has been resolved: vmxnet3: fix BUG_ON in vmxnet3_get_hdr_len() for Geneve packets vmxnet3_get_hdr_len() assumes gdesc->rcd.v4/v6/tcp always describe the outer header, but for a Geneve-encapsulated packet the device can set them based on the inner header instead, signalled by the VMXNET3_RCD_HDR_INNER_SHIFT bit in the completion descriptor. Since the function never skips the outer encapsulation, this mismatch triggers: - BUG_ON(hdr.ipv4->protocol != IPPROTO_TCP), because the outer protocol is UDP (Geneve), not TCP. - BUG_ON(hdr.eth->h_proto != ...), when the tunnel's outer and inner IP versions differ (e.g. outer IPv6/inner IPv4 or vice versa). Check VMXNET3_RCD_HDR_INNER_SHIFT up front and bail out, since the function cannot locate the inner header it would need to parse. Also convert the remaining BUG_ON()s in this function to return 0 defensively.

In the Linux kernel, the following vulnerability has been resolved: net: gre: fix lltx regression for GRE tunnels with SEQ/CSUM Before commit 00d066a4d4ed ("netdev_features: convert NETIF_F_LLTX to dev->lltx"), NETIF_F_LLTX was set unconditionally in both __gre_tunnel_init() and ip6gre_tnl_init_features() alongside GRE_FEATURES: dev->features |= GRE_FEATURES | NETIF_F_LLTX; When that commit converted NETIF_F_LLTX to the dev->lltx flag, it placed 'dev->lltx = true' after the SEQ/CSUM early returns instead of before them. This causes GRE/GRETAP/ip6gre tunnels with SEQ or CSUM+encap to lose lockless TX, reintroducing _xmit_lock acquisition around their ndo_start_xmit. Since GRE xmit re-enters the stack via ip_tunnel_xmit(), holding _xmit_lock risks ABBA deadlock with the underlay device. CPU0 CPU1 ---- ---- lock(&qdisc_xmit_lock_key#6); lock(&qdisc_xmit_lock_key#3); lock(&qdisc_xmit_lock_key#6); lock(&qdisc_xmit_lock_key#3); Fix by moving dev->lltx = true before the early returns in both functions, restoring the original unconditional behavior.

In the Linux kernel, the following vulnerability has been resolved: LoongArch: BPF: Zero-extend signed ALU32 div/mod results ALU32 operations write a 32-bit result and leave the upper 32 bits of the BPF register zero. The LoongArch JIT sign-extends the result of signed ALU32 BPF_DIV and BPF_MOD (off=1), so a negative 32-bit quotient or remainder leaves bits 63:32 set in JITted code while the verifier and interpreter model those bits as zero. Keep sign-extension on the operands, which signed divide needs, and zero-extend the ALU32 result after the divide or modulo instruction, matching the unsigned ALU32 div/mod paths and every other ALU32 operation in this JIT.

In the Linux kernel, the following vulnerability has been resolved: net: qrtr: restrict socket creation to the initial network namespace QRTR keeps its entire port and node state in module-global variables that are not partitioned per network namespace: qrtr_local_nid is a single global node id (always 1) and qrtr_ports is a single global xarray. qrtr_port_lookup() and qrtr_local_enqueue() operate on that global state with no network-namespace check, and qrtr_create() places no restriction on the namespace a socket is created in. As a result an unprivileged process that creates an AF_QIPCRTR socket in a separate network namespace, e.g. via unshare(CLONE_NEWUSER | CLONE_NEWNET), can send QRTR datagrams - including control-plane messages such as QRTR_TYPE_NEW_SERVER - to QRTR sockets owned by another namespace, and vice versa. The receiving socket sees such a message as coming from node id 1, indistinguishable from a legitimate local client, breaking the isolation that network namespaces are expected to provide. QRTR is a transport to global hardware endpoints (the modem and other remote processors) and has no per-namespace semantics; its in-kernel name service already creates its socket in init_net only. Confine the socket family to the initial network namespace, as other non-namespace-aware socket families do (see llc_ui_create() and the ieee802154 socket code).