CVE Feed

mall4j through 4.0 contains a missing authentication vulnerability in the DeliveryController checkDelivery endpoint that allows unauthenticated attackers to read shipment tracking information by supplying an order number parameter. Attackers can access carrier names, waybill numbers, and complete logistics trails for any order without authentication or ownership verification.

mall4j through 4.0 fails to implement authentication controls on the DELETE /prodComm endpoint in ProdCommController. Unauthenticated attackers can delete arbitrary product reviews by supplying the prodCommId parameter without authorization checks.

mall4j through 4.0 contains a missing authentication vulnerability in the PUT /user/updatePwd endpoint that allows unauthenticated attackers to reset any storefront account password. Attackers can supply a target username in the request body to overwrite passwords without verification, enabling account takeover and access to orders and personal data.

A vulnerability was identified in Intelbras TIP 125i 4.3.35/4.3.41. The affected element is an unknown function of the component Básico Page. Such manipulation leads to inclusion of sensitive information in source code. The attack can be launched remotely. A high complexity level is associated with this attack. The exploitability is described as difficult. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure.

The MCUmgr SMP-over-console transport decodes a base64 frame, reads a 16-bit packet length from it, verifies a CRC and then unconditionally strips the trailing CRC with rx_ctxt->nb->len -= 2U; in mcumgr_serial_process_frag() (subsys/mgmt/mcumgr/transport/src/serial_util.c). mcumgr_serial_extract_len() accepted any declared length, including 0 and 1, and a packet declaring length 0 passes the checksum test for free because crc16_itu_t() over zero bytes returns the zero seed. Since net_buf::len is a uint16_t, the subtraction underflows and the buffer is handed to SMP claiming roughly 65 KB of payload while its data area is only CONFIG_MCUMGR_TRANSPORT_NETBUF_SIZE bytes (default 384). The trigger is a single unauthenticated 7-byte line on the management console — the 0x06 0x09 packet marker followed by the base64 group AAA= and a newline — delivered to any transport built on this helper: CONFIG_MCUMGR_TRANSPORT_UART (smp_uart.c) or CONFIG_MCUMGR_TRANSPORT_SHELL (smp_shell.c), both of which select MCUMGR_TRANSPORT_SERIAL_HAS_SMP_OVER_CONSOLE. No prior session state, fragmentation or credentials are required to trigger the underflow, and the malformed frame is mishandled before any command handler or command-level access control runs. The attacker only needs write access to that console, which on many boards is a USB CDC-ACM port rather than a bare UART header. With the inflated length, smp_process_request_packet() in subsys/mgmt/mcumgr/smp/src/smp.c loses its bound: cbor_nb_reader_init() gives the CBOR decoder a ~65 KB window into a 384-byte buffer, and each request header's nh_len is checked only against the inflated length. On its own the 7-byte frame re-parses whatever stale bytes the reused pool buffer still holds, typically a replay of the previously received request followed by a parse error, without leaving the buffer. Because the transport is unauthenticated, though, the attacker also controls the frames sent before the trigger, and can stage buffer contents so that a request succeeds with an nh_len larger than the buffer; net_buf_pull(), guarded only by __ASSERT_NO_MSG, then moves the parse cursor out of bounds and the loop reads further headers and CBOR from adjacent memory. The consequence is an out-of-bounds read that can fault the MCUmgr thread (denial of service); memory disclosure is also possible, since the default-enabled os echo handler (CONFIG_MCUMGR_GRP_OS_ECHO) decodes its string inside that window and copies it into its response. There is no integrity gain beyond what the unauthenticated transport already permits. The fix rejects any declared packet length of two bytes or fewer in mcumgr_serial_extract_len(), so the CRC-strip subtraction can no longer underflow. The identical pattern remains in the test-only loopback transport subsys/mgmt/mcumgr/transport/src/smp_dummy.c (CONFIG_MCUMGR_TRANSPORT_DUMMY), which has no external input path and therefore carries no practical exposure.

parse_write_op() in subsys/net/lib/lwm2m/lwm2m_message_handling.c handles inbound CoAP WRITE/CREATE requests that carry a Block1 option. For the first block of a transfer it called init_block_ctx() and then immediately stored the peer-selected block size with block_ctx->ctx.block_size = block_size before inspecting the return code. init_block_ctx() sets the caller's pointer to NULL and returns -ENOMEM when no entry of the static block1_contexts[] pool is free or timed out, so that store dereferences a NULL pointer. The pool holds CONFIG_LWM2M_NUM_BLOCK1_CONTEXT entries (default 3) and an entry is only reclaimed once its transfer completes, fails, or ages past 30 seconds. A peer that reaches the client's LwM2M socket can therefore start three block-wise writes on three distinct object paths with the CoAP More bit set and leave them incomplete, then send the first block of a fourth write on a new path to reach the unguarded dereference. Reachability is gated only by the connected UDP socket's source-address filter unless CONFIG_LWM2M_DTLS_SUPPORT is enabled — which has no default — so in a NoSec deployment an on-path or address-spoofing attacker needs no credentials; the same sequence is also reachable from a bootstrap or lower-trust server, and can be hit accidentally by a legitimate server running four concurrent block transfers. The write targets a fixed low address with a value between 0 and 7, so the consequence is a fatal memory fault (BusFault or corrupted low memory leading to a fault) rather than a usable memory-corruption primitive: the device crashes or resets. Confidentiality and integrity are not affected. The fix moves the store below the guard and validates the context pointer itself instead of the return code, so the context is only touched once it is known to be valid.

The native BSD-socket layer recorded a pending asynchronous socket error by type-punning it into struct net_context's void user_data field (ctx->user_data = INT_TO_POINTER(-status) in zsock_accepted_cb(), zsock_received_cb(), zsock_connected_cb() and zsock_close_ctx() in subsys/net/lib/sockets/sockets_inet.c), reading it back with POINTER_TO_INT(). That same field is owned by the network stack for listening TCP contexts: net_tcp_accept() stores the parent context pointer there and the TCP core passes it back to the registered accept callback. A failed accept therefore left a small integer (an errno value) where the stack expected a struct net_context . When the network interface carrying a listening TCP socket goes down, close_tcp_conn() in subsys/net/ip/tcp.c invokes the accept callback with -ENETDOWN and the context's user_data. In v4.3.0 the callback was not disarmed afterwards, so a second interface-down event forwarded the previously stored errno to zsock_accepted_cb(), which dereferenced it as the parent context and performed several stores through it (sock_set_error()'s read-modify-write of socket_data, k_fifo_cancel_wait(&parent->recv_q)) — the crash described in the fix's commit message. v4.3.1 and v4.4.x carry a later change clearing conn->accept_cb after the error callback (269cb8823d3 on the v4.3 branch, 913fae5169425550f2364655298fceb79b320066 on main), which closes that repeat path; on those releases the poisoned cookie remains reachable only by a narrower race, a handshake completing alongside the interface-down still passing the stale cookie to k_fifo_put(&parent->accept_q, ...), and by getsockopt(SO_ERROR), which reads the field back unconditionally. On v4.3.0 an application that keeps a listening TCP socket open across repeated link-down events is sufficient to reach the defect; the triggering condition is a network-interface state change, not attacker-supplied packet data, so the practical attacker is one able to force the link down repeatedly (for example an adjacent attacker disrupting a wireless link) or one with local/physical access. Because both the faulting address and the stored data are fixed small constants derived from the errno value, the outcome is a wild-pointer access leading to a kernel fatal error — a denial of service (device crash or reset) rather than an attacker-directed memory corruption. The fix stores the pending error in a dedicated net_context.sock_error field and converts every producer and consumer to sock_set_error()/sock_get_error(), leaving user_data untouched. As a side effect it also stops getsockopt(SO_ERROR) — which is evaluated unconditionally — from returning the kernel address held in user_data to a userspace application.

A vulnerability was determined in Ziroom ZHOME A0101 1.0.1.0. Impacted is an unknown function of the file /api/ZRnetwork/set_passwd. This manipulation of the argument password1 causes command injection. The attack can be initiated remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in Ziroom ZHOME A0101 1.0.1.0. This issue affects some unknown processing of the file /api/ZRQos/set_online_client. The manipulation of the argument mac results in command injection. It is possible to launch the attack remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability has been found in Ziroom ZHOME A0101 1.0.1.0. This vulnerability affects unknown code of the file /api/ZRQos/set_online_client. The manipulation of the argument ip leads to command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

A flaw has been found in Ziroom ZHOME A0101 1.0.1.0. This affects an unknown part of the file /api/ZRnetwork/firstSetup_wifi. Executing a manipulation of the argument login_pwd can lead to command injection. The attack may be performed from remote. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Nginx Proxy Manager through 2.16.0 fails to restrict the advanced_config field to administrators, allowing non-admin users with manage permissions to inject arbitrary nginx directives. Attackers can inject malicious nginx configuration such as alias directives to serve arbitrary files or control routing for their assigned hosts.

Nginx Proxy Manager through 2.16.0 lacks rate-limiting on authentication endpoints, allowing unauthenticated attackers to make unlimited password guesses against any account. Attackers can brute-force login credentials via POST /api/tokens and subsequently guess TOTP codes via POST /api/tokens/2fa to gain full session access and administrative control.

httpdbg before 2.2.1 fails to validate URL schemes in recorded HTTP request URLs rendered as clickable links in the web interface. Attackers controlling traffic recorded by httpdbg can supply javascript: scheme URLs that execute malicious scripts in the application origin when clicked, allowing access to captured request and response data including headers and tokens.

Dozzle versions before 11.1.2 fail to sanitize container display names when building ZIP archive entry names in the log download endpoint. Attackers who can label containers can use path traversal sequences to write files outside the extraction directory when users download and extract logs.

A vulnerability was detected in Ziroom ZHOME A0101 1.0.1.0. Affected by this issue is some unknown functionality of the file /api/ZRnetwork/firstLogin. Performing a manipulation of the argument firstLogin results in command injection. The attack is possible to be carried out remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

ZoneMinder before 1.38.4 fails to apply per-monitor access restrictions in the FramesController index endpoint. Authenticated users with Events view permission can call the frames API to list frame records from monitors they are denied access to, disclosing event and frame metadata across monitor boundaries.

ZoneMinder before 1.38.4 contains static buffer overflow vulnerabilities in RemoteCameraHttp::GetResponse() that allow malicious HTTP cameras or intercepting attackers to overflow fixed-size buffers by sending oversized response headers. Attackers can send crafted HTTP responses with oversized status messages, Connection headers, Content-Type values, or multipart boundaries to corrupt parser state and crash the capture process or corrupt memory.

Cotonti through 1.0.0 contains a cross-site request forgery vulnerability in admin.users.php that allows attackers to delete user groups without token verification. Attackers can craft malicious links or pages that trick authenticated administrators into deleting custom groups and their associated permissions by riding the administrator's session.

SiYuan before v3.8.4 fails to enforce publish-access checks in the getCurrentAttrViewImages endpoint, allowing publish readers to retrieve image asset paths from unauthorized databases. Attackers can call the endpoint with an unrendered database identifier obtained through related endpoints to leak detached-row image asset paths and filenames that the rendering endpoint would deny.

SiYuan versions before v3.8.4 fail to properly validate SQL statements in block query embed blocks executed against siyuan.db. Attackers can craft malicious .sy documents with non-read-only SQL statements that execute automatically during background indexing, rendering, or export operations without authentication.

ZoneMinder versions 1.37.0 before 1.38.0 contain a path traversal vulnerability in the files view that allows authenticated users to read arbitrary files. The path parameter is not properly validated before being passed to output_file, enabling attackers with Events view permission to access sensitive files like configuration files containing database credentials.

A vulnerability was determined in FastStone Image Viewer up to 8.3. This impacts an unknown function of the component PCX Decoder. This manipulation causes out-of-bounds read. The attack may be initiated remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A vulnerability was found in FastStone Image Viewer up to 8.3. This affects an unknown function of the file FSViewer.exe of the component TGA Image Handler. The manipulation results in out-of-bounds read. The attack can be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A code injection vulnerability has been discovered in the Robot Operating System 2 (ROS 2) 'ros2topic' command-line tool, affecting all ROS 2 distributions from Crystal Clemmys up to and including Lyrical Luth and Rolling Ridley. The vulnerability lies in the 'hz' verb, which reports the publishing rate of a topic and accepts a user-provided Python expression via the --filter option. This input is passed directly to the eval() function without sanitization, allowing a local user to craft and execute arbitrary code.

A vulnerability has been found in FastStone Image Viewer up to 8.3. The impacted element is an unknown function of the component 1bpp RLE Decoder. The manipulation leads to out-of-bounds write. The attack can be initiated remotely. The vendor was contacted early about this disclosure but did not respond in any way.

Nest is a framework for building scalable Node.js server-side applications. Prior to 11.2.4 and 12.0.2, a single message with a deeply nested object in its pattern can terminate a NestJS microservice using the TCP or RabbitMQ transport. ServerTCP#handleMessage and ServerRMQ#handleMessage pass a client-controlled non-string pattern to JSON.stringify to derive the handler lookup key; sufficiently deep nesting throws RangeError: Maximum call stack size exceeded, and the unhandled promise rejection terminates Node.js under its default behavior. An attacker who can reach the TCP port or publish to the consumed RabbitMQ queue or exchange can crash the service on demand; other transports are not affected because their patterns arrive as strings. This issue is fixed in versions 11.2.4 and 12.0.2.

A flaw has been found in FastStone Image Viewer up to 8.3. The affected element is an unknown function of the component TGA Image Handler. Executing a manipulation can lead to out-of-bounds write. It is possible to launch the attack remotely. The vendor was contacted early about this disclosure but did not respond in any way.

A security vulnerability has been detected in Netcore POWER13 2.0.240730.162638. This issue affects the function routerd.passwd_set of the file /ubus. Such manipulation leads to weak password recovery. The attack may be performed from remote. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Laravel is a web application framework. Prior to 12.69.0 and 13.30.0, Laravel exception debug pages with APP_DEBUG=true pass attacker-controlled input to a Tippy.js tooltip configured with allowHTML true, enabling DOM-based cross-site scripting when a user hovers over the tooltip. This issue is fixed in versions 12.69.0 and 13.30.0.

The brace-expansion library generates arbitrary strings containing a common prefix and suffix. Prior to 1.1.20, 2.1.6, 3.0.8, and 5.0.11, deeply nested brace groups cause expand_() to recurse once per nesting level at comma-member and single-set expansion sites, exhausting the native stack before output limits can apply and potentially terminating the Node.js process. expand_ performs uncontrolled recursion for nested brace alternatives and single-part sets. deeply nested brace groups supplied as an untrusted pattern. expand_ is affected. expand is affected. Comma members is affected. Single set is affected. native stack exhaustion during nested sub-expansion. process-terminating denial of service. This issue is fixed in versions 1.1.20, 2.1.6, 3.0.8, and 5.0.11.

A flaw was found in Quay. A cross-site scripting (XSS) vulnerability in the OAuth callback handler allows a remote attacker to execute arbitrary JavaScript code within a user's browser session. By tricking a logged-in user into visiting a specially crafted link, an attacker can exploit improper input sanitization to run client-side scripts in the application context. Successful exploitation could allow the attacker to compromise the user's session, access sensitive registry information, or perform unauthorized actions on their behalf.

The brace-expansion library generates arbitrary strings containing a common prefix and suffix. Prior to 1.1.21, 2.1.7, 3.0.9, and 5.0.12, the expand function handles untrusted {a},b}-shaped patterns with many trailing closing braces by restarting its scan once for each trailing closing brace. The successive full-input rescans with linear working-string growth cause quadratic CPU time and memory pressure that can block the Node.js event loop. The process eventually recovers, making the impact a recoverable CPU denial of service. This issue is fixed in versions 1.1.21, 2.1.7, 3.0.9, and 5.0.12.

The brace-expansion library generates arbitrary strings containing a common prefix and suffix. Prior to 1.1.19, 2.1.5, 3.0.7, and 5.0.10, crafted brace patterns can exhaust the native stack in parseCommaParts because parseCommaParts recursively processes the remainder once per brace group and uses push.apply to pass every element of a very large comma-part array as a function argument. Patterns containing many comma-separated brace groups trigger the recursive path, while the large array triggers the argument-array path without deep recursion. These paths cause recursive and argument-array native stack exhaustion before max or maxLength can limit output, potentially terminating the Node.js process in a process-terminating denial of service. This issue is fixed in versions 1.1.19, 2.1.5, 3.0.7, and 5.0.10.

PyJWT is a Python implementation of JSON Web Token standards. From 2.13.0 until 2.14.0, PyJWS._load in jwt/api_jws.py is affected because parser catches ValueError but not RecursionError. This occurs when a deeply nested token header reaches json.loads. As a result, RecursionError escapes the documented PyJWT error hierarchy. Consequently, an unauthenticated malformed token can cause a request-level failure and HTTP 500. This issue is fixed in version 2.14.0.

In Wind River VxWorks 7 prior to 26.09, specific system call arguments can result in the process management subsystem failing to properly release allocated kernel memory before terminating the calling application. Fixed in Version 26.09

PyJWT is a Python implementation of JSON Web Token standards. From 2.1.0 until 2.15.0, PyJWT OKPAlgorithm.from_jwk in jwt/algorithms.py is affected because private-JWK import path does not compare the public key derived from d with x. This occurs when an OKP private JWK supplies non-corresponding x and d components. As a result, identity derived from x can differ from operations performed with d. Consequently, if an integration also accepts private key parameters from a proof header without rejecting them, an attacker may use a stolen sender-constrained token without the legitimate private key. This issue is fixed in version 2.15.0.

A weakness has been identified in Ziroom ZHOME A0101 1.0.1.0. This vulnerability affects the function pop_usb_device of the file usr/lib/lua/luci/controller/api/zrUsb.lua of the component USB Device Management API. This manipulation of the argument path causes command injection. The attack is possible to be carried out remotely. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

In proxygen from v2024.10.28.00 until v2026.09.28.00, WebTransportImpl::terminateSessionStreams (WebTransportImpl::destroy in releases before v2025.08.18.00) failed to unregister read callbacks for streams that were no longer open before destroying them. The transport could then invoke a read callback that had been freed.

In proxygen from v2024.10.28.00 until v2026.09.28.00, the HTTPTransaction::onWebTransportUniStream and HTTPTransaction::onWebTransportBidiStream APIs could return stream handles that the stream handler had already freed. HQSession then installed those handles as transport read callbacks, which could lead to use of freed memory.

In proxygen from v2026.04.06.00 until v2026.09.28.00, QuicWtSession::closeSession accesses its member fields after calling the base QuicWtSessionBase::closeSession method. The base method notifies the session handler, which may release the last reference to the session and destroy it.

PyJWT is a Python implementation of JSON Web Token standards. From 2.9.0 until 2.14.0, PyJWKSet does not catch the plain ValueError raised for malformed RSA JWK components by RSAAlgorithm.from_jwk in jwt/api_jwk.py. This occurs when a JWK Set contains a malformed RSA key alongside otherwise usable keys. As a result, one malformed member aborts construction of the entire PyJWKSet. Consequently, applications can experience authentication failures or request-level denial of service. This issue is fixed in version 2.14.0.

PyJWT is a Python implementation of JSON Web Token standards. From 2.13.0 until 2.14.0, PyJWT HMACAlgorithm.prepare_key is affected because HMAC key guard only recognizes top-level public JWK forms and misses container representations. This occurs when an application allows HMAC and asymmetric algorithms and passes a public JWK container as the raw key. As a result, public asymmetric key material is accepted as the HMAC secret. Consequently, an attacker who knows the public key can forge a token with arbitrary authenticated claims. This issue is fixed in version 2.14.0.

PyJWT is a Python implementation of JSON Web Token standards. From 2.13.0 until 2.14.0, HMACAlgorithm.prepare_key in jwt/algorithms.py is affected because raw-JWK detector does not normalize accepted Unicode byte-order marks before checking for JSON. This occurs when a public JWK is prefixed with a UTF-8 BOM and used in a mixed-algorithm verification path. As a result, public JWK bypasses asymmetric-key detection and becomes the HMAC secret. Consequently, an attacker who knows the public key can forge authenticated tokens. This issue is fixed in version 2.14.0.

PyJWT is a Python implementation of JSON Web Token standards. From 2.4.0 until 2.14.0, PyJWT HMACAlgorithm.prepare_key is affected because asymmetric-key guard relies on textual markers that are absent from DER encoding. This occurs when an application mixes HMAC and asymmetric algorithms and supplies a DER public key as the shared verification key. As a result, PyJWT uses public DER bytes as an HMAC secret. Consequently, an attacker who knows the public key can forge authenticated HMAC tokens. This issue is fixed in version 2.14.0.

A security flaw has been discovered in Eleveo Quality Management 9.7.0. This issue affects the function UtilsService.createAndSaveAudit of the file /qm/cz.zoom.scorecard.webui.Scorecard/QMUtilsService of the component GWT RPC Handler. Performing a manipulation results in information disclosure. The attack is possible to be carried out remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way.

PyJWT is a Python implementation of JSON Web Token standards. Prior to 2.14.0, PyJWT is_pem_format is affected because lazy PEM regular expression backtracks extensively. This occurs when a certificate-like input contains repeated BEGIN markers without a matching END marker. As a result, is_pem_format performs unbounded backtracking while searching for a PEM end marker. Consequently, an attacker can cause intensive CPU consumption. This issue is fixed in version 2.14.0.

PyJWT is a Python implementation of JSON Web Token standards. Prior to 2.14.0, PyJWT signature segment is affected because signature segment decoding accepts characters outside the canonical Base64URL representation. This occurs when non-Base64URL characters are appended to a valid compact JWS signature segment. As a result, base64url_decode produces the same signature bytes for different serialized segments. Consequently, raw-token revocation checks can fail to recognize an equivalent modified token. This issue is fixed in version 2.14.0.

PyJWT is a Python implementation of JSON Web Token standards. Prior to 2.14.0, is_pem_format in jwt/utils.py is affected because is_pem_format does not recognize every PEM representation accepted by the cryptography loader. This occurs when an application mixes HMAC and asymmetric algorithms and supplies a mutated public-key PEM as raw key bytes. As a result, HMACAlgorithm.prepare_key treats the unrecognized asymmetric public key as an HMAC secret. Consequently, an attacker who knows the public key can forge authenticated HMAC tokens. This issue is fixed in version 2.14.0.

PyJWT is a Python implementation of JSON Web Token standards. Prior to 2.14.0, PyJWT PyJWKClient is affected because redirect destinations are not revalidated against the JWKS trust boundary. This occurs when a configured trusted JWKS endpoint returns an attacker-influenced redirect. As a result, PyJWKClient follows the redirect and consumes the redirected response as key material. Consequently, forwarded credentials may be disclosed or verification keys may be substituted. This issue is fixed in version 2.14.0.