CVE Feed

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: revert commit_mutex usage in reset path It causes circular lock dependency between commit_mutex, nfnl_subsys_ipset and nlk_cb_mutex when nft reset, ipset list, and iptables-nft with '-m set' rule run at the same time. Previous patches made it safe to run individual reset handlers concurrently so commit_mutex is no longer required to prevent this.

In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix memory leak in amdxdna_ubuf_map The amdxdna_ubuf_map() function allocates memory for sg and internal sg table structures, but it fails to free them if subsequent operations (sg_alloc_table_from_pages or dma_map_sgtable) fail.

In the Linux kernel, the following vulnerability has been resolved: bpf: Require frozen map for calculating map hash Currently, bpf_map_get_info_by_fd calculates and caches the hash of the map regardless of the map's frozen state. This leads to a TOCTOU bug where userspace can call BPF_OBJ_GET_INFO_BY_FD to cache the hash and then modify the map contents before freezing. Therefore, a trusted loader can be tricked into verifying the stale hash while loading the modified contents. Fix this by returning -EPERM if the map is not frozen when the hash is requested. This ensures the hash is only generated for the final, immutable state of the map.

In the Linux kernel, the following vulnerability has been resolved: io_uring/zcrx: fix user_struct uaf io_free_rbuf_ring() usees a struct user_struct, which io_zcrx_ifq_free() puts it down before destroying the ring.

In the Linux kernel, the following vulnerability has been resolved: ext2: reject inodes with zero i_nlink and valid mode in ext2_iget() ext2_iget() already rejects inodes with i_nlink == 0 when i_mode is zero or i_dtime is set, treating them as deleted. However, the case of i_nlink == 0 with a non-zero mode and zero dtime slips through. Since ext2 has no orphan list, such a combination can only result from filesystem corruption - a legitimate inode deletion always sets either i_dtime or clears i_mode before freeing the inode. A crafted image can exploit this gap to present such an inode to the VFS, which then triggers WARN_ON inside drop_nlink() (fs/inode.c) via ext2_unlink(), ext2_rename() and ext2_rmdir(): WARNING: CPU: 3 PID: 609 at fs/inode.c:336 drop_nlink+0xad/0xd0 fs/inode.c:336 CPU: 3 UID: 0 PID: 609 Comm: syz-executor Not tainted 6.12.77+ #1 Call Trace: <TASK> inode_dec_link_count include/linux/fs.h:2518 [inline] ext2_unlink+0x26c/0x300 fs/ext2/namei.c:295 vfs_unlink+0x2fc/0x9b0 fs/namei.c:4477 do_unlinkat+0x53e/0x730 fs/namei.c:4541 __x64_sys_unlink+0xc6/0x110 fs/namei.c:4587 do_syscall_64+0xf5/0x220 arch/x86/entry/common.c:78 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> WARNING: CPU: 0 PID: 646 at fs/inode.c:336 drop_nlink+0xad/0xd0 fs/inode.c:336 CPU: 0 UID: 0 PID: 646 Comm: syz.0.17 Not tainted 6.12.77+ #1 Call Trace: <TASK> inode_dec_link_count include/linux/fs.h:2518 [inline] ext2_rename+0x35e/0x850 fs/ext2/namei.c:374 vfs_rename+0xf2f/0x2060 fs/namei.c:5021 do_renameat2+0xbe2/0xd50 fs/namei.c:5178 __x64_sys_rename+0x7e/0xa0 fs/namei.c:5223 do_syscall_64+0xf5/0x220 arch/x86/entry/common.c:78 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> WARNING: CPU: 0 PID: 634 at fs/inode.c:336 drop_nlink+0xad/0xd0 fs/inode.c:336 CPU: 0 UID: 0 PID: 634 Comm: syz-executor Not tainted 6.12.77+ #1 Call Trace: <TASK> inode_dec_link_count include/linux/fs.h:2518 [inline] ext2_rmdir+0xca/0x110 fs/ext2/namei.c:311 vfs_rmdir+0x204/0x690 fs/namei.c:4348 do_rmdir+0x372/0x3e0 fs/namei.c:4407 __x64_sys_unlinkat+0xf0/0x130 fs/namei.c:4577 do_syscall_64+0xf5/0x220 arch/x86/entry/common.c:78 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Extend the existing i_nlink == 0 check to also catch this case, reporting the corruption via ext2_error() and returning -EFSCORRUPTED. This rejects the inode at load time and prevents it from reaching any of the namei.c paths. Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: fix damos_walk() vs kdamond_fn() exit race When kdamond_fn() main loop is finished, the function cancels remaining damos_walk() request and unset the damon_ctx->kdamond so that API callers and API functions themselves can show the context is terminated. damos_walk() adds the caller's request to the queue first. After that, it shows if the kdamond of the damon_ctx is still running (damon_ctx->kdamond is set). Only if the kdamond is running, damos_walk() starts waiting for the kdamond's handling of the newly added request. The damos_walk() requests registration and damon_ctx->kdamond unset are protected by different mutexes, though. Hence, damos_walk() could race with damon_ctx->kdamond unset, and result in deadlocks. For example, let's suppose kdamond successfully finished the damow_walk() request cancelling. Right after that, damos_walk() is called for the context. It registers the new request, and shows the context is still running, because damon_ctx->kdamond unset is not yet done. Hence the damos_walk() caller starts waiting for the handling of the request. However, the kdamond is already on the termination steps, so it never handles the new request. As a result, the damos_walk() caller thread infinitely waits. Fix this by introducing another damon_ctx field, namely walk_control_obsolete. It is protected by the damon_ctx->walk_control_lock, which protects damos_walk() request registration. Initialize (unset) it in kdamond_fn() before letting damon_start() returns and set it just before the cancelling of the remaining damos_walk() request is executed. damos_walk() reads the obsolete field under the lock and avoids adding a new request. After this change, only requests that are guaranteed to be handled or cancelled are registered. Hence the after-registration DAMON context termination check is no longer needed. Remove it together. The issue is found by sashiko [1].

Craft CMS 5.9.5 and earlier contains a Missing Authorization vulnerability in the migrate endpoint (/actions/app/migrate).

An issue in Dolibarr ERP/CRM v.22.0.0 through v.22.0.4 and v.24.0.0-alpha allows a remote attacker to execute arbitrary code via the htdocs/core/actions_addupdatedelete.inc.php

In the Linux kernel, the following vulnerability has been resolved: RDMA/mlx5: Fix memory leak in GET_DATA_DIRECT_SYSFS_PATH handler The UVERBS_HANDLER(MLX5_IB_METHOD_GET_DATA_DIRECT_SYSFS_PATH) function allocates memory for the device path using kobject_get_path(). If the length of the device path exceeds the output buffer length, the function returns -ENOSPC but does not free the allocated memory, resulting in a memory leak. Add a kfree() call to the error path to ensure the allocated memory is properly freed. Compile tested only. Issue found using a prototype static analysis tool and code review.

In the Linux kernel, the following vulnerability has been resolved: rust: pwm: Fix potential memory leak on init error When initializing a PWM chip using pwmchip_alloc(), the allocated device owns an initial reference that must be released on all error paths. If __pinned_init() were to fail, the allocated pwm_chip would currently leak because the error path returns without calling pwmchip_put().

In the Linux kernel, the following vulnerability has been resolved: bpf: Preserve id of register in sync_linked_regs() sync_linked_regs() copies the id of known_reg to reg when propagating bounds of known_reg to reg using the off of known_reg, but when known_reg was linked to reg like: known_reg = reg ; both known_reg and reg get same id known_reg += 4 ; known_reg gets off = 4, and its id gets BPF_ADD_CONST now when a call to sync_linked_regs() happens, let's say with the following: if known_reg >= 10 goto pc+2 known_reg's new bounds are propagated to reg but now reg gets BPF_ADD_CONST from the copy. This means if another link to reg is created like: another_reg = reg ; another_reg should get the id of reg but assign_scalar_id_before_mov() sees BPF_ADD_CONST on reg and assigns a new id to it. As reg has a new id now, known_reg's link to reg is broken. If we find new bounds for known_reg, they will not be propagated to reg. This can be seen in the selftest added in the next commit: 0: (85) call bpf_get_prandom_u32#7 ; R0=scalar() 1: (57) r0 &= 255 ; R0=scalar(smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff)) 2: (bf) r1 = r0 ; R0=scalar(id=1,smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff)) R1=scalar(id=1,smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff)) 3: (07) r1 += 4 ; R1=scalar(id=1+4,smin=umin=smin32=umin32=4,smax=umax=smax32=umax32=259,var_off=(0x0; 0x1ff)) 4: (a5) if r1 < 0xa goto pc+4 ; R1=scalar(id=1+4,smin=umin=smin32=umin32=10,smax=umax=smax32=umax32=259,var_off=(0x0; 0x1ff)) 5: (bf) r2 = r0 ; R0=scalar(id=2,smin=umin=smin32=umin32=6,smax=umax=smax32=umax32=255) R2=scalar(id=2,smin=umin=smin32=umin32=6,smax=umax=smax32=umax32=255) 6: (a5) if r1 < 0xe goto pc+2 ; R1=scalar(id=1+4,smin=umin=smin32=umin32=14,smax=umax=smax32=umax32=259,var_off=(0x0; 0x1ff)) 7: (35) if r0 >= 0xa goto pc+1 ; R0=scalar(id=2,smin=umin=smin32=umin32=6,smax=umax=smax32=umax32=9,var_off=(0x0; 0xf)) 8: (37) r0 /= 0 div by zero When 4 is verified, r1's bounds are propagated to r0 but r0 also gets BPF_ADD_CONST (bug). When 5 is verified, r0 gets a new id (2) and its link with r1 is broken. After 6 we know r1 has bounds [14, 259] and therefore r0 should have bounds [10, 255], therefore the branch at 7 is always taken. But because r0's id was changed to 2, r1's new bounds are not propagated to r0. The verifier still thinks r0 has bounds [6, 255] before 7 and execution can reach div by zero. Fix this by preserving id in sync_linked_regs() like off and subreg_def.

In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: clean up the amdgpu_cs_parser_bos In low memory conditions, kmalloc can fail. In such conditions unlock the mutex for a clean exit. We do not need to amdgpu_bo_list_put as it's been handled in the amdgpu_cs_parser_fini.

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix memory leaks in rxkad_verify_response() Fix rxkad_verify_response() to free the ticket and the server key under all circumstances by initialising the ticket pointer to NULL and then making all paths through the function after the first allocation has been done go through a single common epilogue that just releases everything - where all the releases skip on a NULL pointer.

In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Add missing save/restore handling of LBR MSRs MSR_IA32_DEBUGCTLMSR and LBR MSRs are currently not enumerated by KVM_GET_MSR_INDEX_LIST, and LBR MSRs cannot be set with KVM_SET_MSRS. So save/restore is completely broken. Fix it by adding the MSRs to msrs_to_save_base, and allowing writes to LBR MSRs from userspace only (as they are read-only MSRs) if LBR virtualization is enabled. Additionally, to correctly restore L1's LBRs while L2 is running, make sure the LBRs are copied from the captured VMCB01 save area in svm_copy_vmrun_state(). Note, for VMX, this also fixes a flaw where MSR_IA32_DEBUGCTLMSR isn't reported as an MSR to save/restore. Note #2, over-reporting MSR_IA32_LASTxxx on Intel is ok, as KVM already handles unsupported reads and writes thanks to commit b5e2fec0ebc3 ("KVM: Ignore DEBUGCTL MSRs with no effect") (kvm_do_msr_access() will morph the unsupported userspace write into a nop). [sean: guard with lbrv checks, massage changelog]

In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Validate pad and ICRC before payload_size() in rxe_rcv rxe_rcv() currently checks only that the incoming packet is at least header_size(pkt) bytes long before payload_size() is used. However, payload_size() subtracts both the attacker-controlled BTH pad field and RXE_ICRC_SIZE from pkt->paylen: payload_size = pkt->paylen - offset[RXE_PAYLOAD] - bth_pad(pkt) - RXE_ICRC_SIZE This means a short packet can still make payload_size() underflow even if it includes enough bytes for the fixed headers. Simply requiring header_size(pkt) + RXE_ICRC_SIZE is not sufficient either, because a packet with a forged non-zero BTH pad can still leave payload_size() negative and pass an underflowed value to later receive-path users. Fix this by validating pkt->paylen against the full minimum length required by payload_size(): header_size(pkt) + bth_pad(pkt) + RXE_ICRC_SIZE.

In the Linux kernel, the following vulnerability has been resolved: greybus: gb-beagleplay: fix sleep in atomic context in hdlc_tx_frames() hdlc_append() calls usleep_range() to wait for circular buffer space, but it is called with tx_producer_lock (a spinlock) held via hdlc_tx_frames() -> hdlc_append_tx_frame()/hdlc_append_tx_u8()/etc. Sleeping while holding a spinlock is illegal and can trigger "BUG: scheduling while atomic". Fix this by moving the buffer-space wait out of hdlc_append() and into hdlc_tx_frames(), before the spinlock is acquired. The new flow: 1. Pre-calculate the worst-case encoded frame length. 2. Wait (with sleep) outside the lock until enough space is available, kicking the TX consumer work to drain the buffer. 3. Acquire the spinlock, re-verify space, and write the entire frame atomically. This ensures that sleeping only happens without any lock held, and that frames are either fully enqueued or not written at all. This bug is found by CodeQL static analysis tool (interprocedural sleep-in-atomic query) and my code review.

In the Linux kernel, the following vulnerability has been resolved: ALSA: caiaq: fix usb_dev refcount leak on probe failure create_card() takes a reference on the USB device with usb_get_dev() and stores the matching usb_put_dev() in card_free(), which is installed as the snd_card's ->private_free destructor. However, ->private_free is only assigned near the end of init_card(), after several failure points (usb_set_interface(), EP type checks, usb_submit_urb(), the EP1_CMD_GET_DEVICE_INFO exchange, and its timeout). When any of those fail, init_card() returns an error to snd_probe(), which calls snd_card_free(card). Because ->private_free is still NULL, card_free() never runs, the usb_get_dev() reference is not dropped, and the struct usb_device leaks along with its descriptor allocations and device_private. syzbot reproduces this with a malformed UAC3 device whose only valid altsetting is 0; init_card()'s usb_set_interface(usb_dev, 0, 1) call fails with -EIO and triggers the leak. Move the ->private_free assignment into create_card(), immediately after usb_get_dev(), so that every error path reaching snd_card_free() balances the reference. card_free()'s callees (snd_usb_caiaq_input_free, free_urbs, kfree) already tolerate the partially-initialized state because the chip private area is zero-initialized by snd_card_new().

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_event: fix potential UAF in SSP passkey handlers hci_conn lookup and field access must be covered by hdev lock in hci_user_passkey_notify_evt() and hci_keypress_notify_evt(), otherwise the connection can be freed concurrently. Extend the hci_dev_lock critical section to cover all conn usage in both handlers. Keep the existing keypress notification behavior unchanged by routing the early exits through a common unlock path.

In the Linux kernel, the following vulnerability has been resolved: ocfs2: split transactions in dio completion to avoid credit exhaustion During ocfs2 dio operations, JBD2 may report warnings via following call trace: ocfs2_dio_end_io_write ocfs2_mark_extent_written ocfs2_change_extent_flag ocfs2_split_extent ocfs2_try_to_merge_extent ocfs2_extend_rotate_transaction ocfs2_extend_trans jbd2__journal_restart start_this_handle output: JBD2: kworker/6:2 wants too many credits credits:5450 rsv_credits:0 max:5449 To prevent exceeding the credits limit, modify ocfs2_dio_end_io_write() to handle extents in a batch of transaction. Additionally, relocate ocfs2_del_inode_from_orphan(). The orphan inode should only be removed from the orphan list after the extent tree update is complete. This ensures that if a crash occurs in the middle of extent tree updates, we won't leave stale blocks beyond EOF. This patch also changes the logic for updating the inode size and removing orphan, making it similar to ext4_dio_write_end_io(). Both operations are performed only when everything looks good. Finally, thanks to Jans and Joseph for providing the bug fix prototype and suggestions.

In the Linux kernel, the following vulnerability has been resolved: KVM: SVM: Inject #UD for INVLPGA if EFER.SVME=0 INVLPGA should cause a #UD when EFER.SVME is not set. Add a check to properly inject #UD when EFER.SVME=0. [sean: tag for stable@]

In the Linux kernel, the following vulnerability has been resolved: spi: fix resource leaks on device setup failure Make sure to call controller cleanup() if spi_setup() fails while registering a device to avoid leaking any resources allocated by setup().

In the Linux kernel, the following vulnerability has been resolved: wifi: rtw88: check for PCI upstream bridge existence pci_upstream_bridge() returns NULL if the device is on a root bus. If 8821CE is installed in the system with such a PCI topology, the probing routine will crash. This has probably been unnoticed as 8821CE is mostly supplied in laptops where there is a PCI-to-PCI bridge located upstream from the device. However the card might be installed on a system with different configuration. Check if the bridge does exist for the specific workaround to be applied. Found by Linux Verification Center (linuxtesting.org) with Svace static analysis tool.

In the Linux kernel, the following vulnerability has been resolved: md/md-llbitmap: raise barrier before state machine transition Move the barrier raise operation before calling llbitmap_state_machine() in both llbitmap_start_write() and llbitmap_start_discard(). This ensures the barrier is in place before any state transitions occur, preventing potential race conditions where the state machine could complete before the barrier is properly raised.

Northern.tech Mender Client 5 before 5.0.4 allows a Cryptographic signature verification bypass.

SpSoft AppLock (com.sp.protector.free) 7.9.40 for Android allows a local attacker with physical access to bypass fingerprint or PIN authentication. Although the app integrates Android's biometric mechanisms, the lock is implemented with a custom overlay that fails to consistently enforce authentication. By navigating cascading interface flows - insecure navigation through exposed routes facilitates app control evasion {I.N.T.E.R.F.A.C.E] via advertisement or browser intents - an attacker can exit the lock interface without re-authentication and access protected apps (e.g., Chrome). This results in information disclosure and privilege escalation.

In the Linux kernel, the following vulnerability has been resolved: smack: /smack/doi: accept previously used values Writing to /smack/doi a value that has ever been written there in the past disables networking for non-ambient labels. E.g. # cat /smack/doi 3 # netlabelctl -p cipso list Configured CIPSO mappings (1) DOI value : 3 mapping type : PASS_THROUGH # netlabelctl -p map list Configured NetLabel domain mappings (3) domain: "_" (IPv4) protocol: UNLABELED domain: DEFAULT (IPv4) protocol: CIPSO, DOI = 3 domain: DEFAULT (IPv6) protocol: UNLABELED # cat /smack/ambient _ # cat /proc/$$/attr/smack/current _ # ping -c1 10.1.95.12 64 bytes from 10.1.95.12: icmp_seq=1 ttl=64 time=0.964 ms # echo foo >/proc/$$/attr/smack/current # ping -c1 10.1.95.12 64 bytes from 10.1.95.12: icmp_seq=1 ttl=64 time=0.956 ms unknown option 86 # echo 4 >/smack/doi # echo 3 >/smack/doi !> [ 214.050395] smk_cipso_doi:691 cipso add rc = -17 # echo 3 >/smack/doi !> [ 249.402261] smk_cipso_doi:678 remove rc = -2 !> [ 249.402261] smk_cipso_doi:691 cipso add rc = -17 # ping -c1 10.1.95.12 !!> ping: 10.1.95.12: Address family for hostname not supported # echo _ >/proc/$$/attr/smack/current # ping -c1 10.1.95.12 64 bytes from 10.1.95.12: icmp_seq=1 ttl=64 time=0.617 ms This happens because Smack keeps decommissioned DOIs, fails to re-add them, and consequently refuses to add the “default” domain map: # netlabelctl -p cipso list Configured CIPSO mappings (2) DOI value : 3 mapping type : PASS_THROUGH DOI value : 4 mapping type : PASS_THROUGH # netlabelctl -p map list Configured NetLabel domain mappings (2) domain: "_" (IPv4) protocol: UNLABELED !> (no ipv4 map for default domain here) domain: DEFAULT (IPv6) protocol: UNLABELED Fix by clearing decommissioned DOI definitions and serializing concurrent DOI updates with a new lock. Also: - allow /smack/doi to live unconfigured, since adding a map (netlbl_cfg_cipsov4_map_add) may fail. CIPSO_V4_DOI_UNKNOWN(0) indicates the unconfigured DOI - add new DOI before removing the old default map, so the old map remains if the add fails (2008-02-04, Casey Schaufler)

A Cross-Site Request Forgery (CSRF) vulnerability was discovered in the delete.php endpoint of Jason2605 AdminPanel 4.0.

Northern.tech Mender Enterprise Server before 4.1.1 has Incorrect Access Control.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix deadlocks between devlink and netdev instance locks In the mentioned "Fixes" commit, various work tasks triggering devlink health reporter recovery were switched to use netdev_trylock to protect against concurrent tear down of the channels being recovered. But this had the side effect of introducing potential deadlocks because of incorrect lock ordering. The correct lock order is described by the init flow: probe_one -> mlx5_init_one (acquires devlink lock) -> mlx5_init_one_devl_locked -> mlx5_register_device -> mlx5_rescan_drivers_locked -...-> mlx5e_probe -> _mlx5e_probe -> register_netdev (acquires rtnl lock) -> register_netdevice (acquires netdev lock) => devlink lock -> rtnl lock -> netdev lock. But in the current recovery flow, the order is wrong: mlx5e_tx_err_cqe_work (acquires netdev lock) -> mlx5e_reporter_tx_err_cqe -> mlx5e_health_report -> devlink_health_report (acquires devlink lock => boom!) -> devlink_health_reporter_recover -> mlx5e_tx_reporter_recover -> mlx5e_tx_reporter_recover_from_ctx -> mlx5e_tx_reporter_err_cqe_recover The same pattern exists in: mlx5e_reporter_rx_timeout mlx5e_reporter_tx_ptpsq_unhealthy mlx5e_reporter_tx_timeout Fix these by moving the netdev_trylock calls from the work handlers lower in the call stack, in the respective recovery functions, where they are actually necessary.

In the Linux kernel, the following vulnerability has been resolved: ipvs: do not keep dest_dst if dev is going down There is race between the netdev notifier ip_vs_dst_event() and the code that caches dst with dev that is going down. As the FIB can be notified for the closed device after our handler finishes, it is possible valid route to be returned and cached resuling in a leaked dev reference until the dest is not removed. To prevent new dest_dst to be attached to dest just after the handler dropped the old one, add a netif_running() check to make sure the notifier handler is not currently running for device that is closing.

In the Linux kernel, the following vulnerability has been resolved: thermal/of: Fix reference leak in thermal_of_cm_lookup() In thermal_of_cm_lookup(), tr_np is obtained via of_parse_phandle(), but never released. Use the __free(device_node) cleanup attribute to automatically release the node and fix the leak. [ rjw: Changelog edits ]

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix watch_id bounds checking in debug address watch v2 The address watch clear code receives watch_id as an unsigned value (u32), but some helper functions were using a signed int and checked bits by shifting with watch_id. If a very large watch_id is passed from userspace, it can be converted to a negative value. This can cause invalid shifts and may access memory outside the watch_points array. drm/amdkfd: Fix watch_id bounds checking in debug address watch v2 Fix this by checking that watch_id is within MAX_WATCH_ADDRESSES before using it. Also use BIT(watch_id) to test and clear bits safely. This keeps the behavior unchanged for valid watch IDs and avoids undefined behavior for invalid ones. Fixes the below: drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_debug.c:448 kfd_dbg_trap_clear_dev_address_watch() error: buffer overflow 'pdd->watch_points' 4 <= u32max user_rl='0-3,2147483648-u32max' uncapped drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_debug.c 433 int kfd_dbg_trap_clear_dev_address_watch(struct kfd_process_device *pdd, 434 uint32_t watch_id) 435 { 436 int r; 437 438 if (!kfd_dbg_owns_dev_watch_id(pdd, watch_id)) kfd_dbg_owns_dev_watch_id() doesn't check for negative values so if watch_id is larger than INT_MAX it leads to a buffer overflow. (Negative shifts are undefined). 439 return -EINVAL; 440 441 if (!pdd->dev->kfd->shared_resources.enable_mes) { 442 r = debug_lock_and_unmap(pdd->dev->dqm); 443 if (r) 444 return r; 445 } 446 447 amdgpu_gfx_off_ctrl(pdd->dev->adev, false); --> 448 pdd->watch_points[watch_id] = pdd->dev->kfd2kgd->clear_address_watch( 449 pdd->dev->adev, 450 watch_id); v2: (as per, Jonathan Kim) - Add early watch_id >= MAX_WATCH_ADDRESSES validation in the set path to match the clear path. - Drop the redundant bounds check in kfd_dbg_owns_dev_watch_id().

In the Linux kernel, the following vulnerability has been resolved: erofs: fix inline data read failure for ztailpacking pclusters Compressed folios for ztailpacking pclusters must be valid before adding these pclusters to I/O chains. Otherwise, z_erofs_decompress_pcluster() may assume they are already valid and then trigger a NULL pointer dereference. It is somewhat hard to reproduce because the inline data is in the same block as the tail of the compressed indexes, which are usually read just before. However, it may still happen if a fatal signal arrives while read_mapping_folio() is running, as shown below: erofs: (device dm-1): z_erofs_pcluster_begin: failed to get inline data -4 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008 ... pc : z_erofs_decompress_queue+0x4c8/0xa14 lr : z_erofs_decompress_queue+0x160/0xa14 sp : ffffffc08b3eb3a0 x29: ffffffc08b3eb570 x28: ffffffc08b3eb418 x27: 0000000000001000 x26: ffffff8086ebdbb8 x25: ffffff8086ebdbb8 x24: 0000000000000001 x23: 0000000000000008 x22: 00000000fffffffb x21: dead000000000700 x20: 00000000000015e7 x19: ffffff808babb400 x18: ffffffc089edc098 x17: 00000000c006287d x16: 00000000c006287d x15: 0000000000000004 x14: ffffff80ba8f8000 x13: 0000000000000004 x12: 00000006589a77c9 x11: 0000000000000015 x10: 0000000000000000 x9 : 0000000000000000 x8 : 0000000000000000 x7 : 0000000000000000 x6 : 000000000000003f x5 : 0000000000000040 x4 : ffffffffffffffe0 x3 : 0000000000000020 x2 : 0000000000000008 x1 : 0000000000000000 x0 : 0000000000000000 Call trace: z_erofs_decompress_queue+0x4c8/0xa14 z_erofs_runqueue+0x908/0x97c z_erofs_read_folio+0x128/0x228 filemap_read_folio+0x68/0x128 filemap_get_pages+0x44c/0x8b4 filemap_read+0x12c/0x5b8 generic_file_read_iter+0x4c/0x15c do_iter_readv_writev+0x188/0x1e0 vfs_iter_read+0xac/0x1a4 backing_file_read_iter+0x170/0x34c ovl_read_iter+0xf0/0x140 vfs_read+0x28c/0x344 ksys_read+0x80/0xf0 __arm64_sys_read+0x24/0x34 invoke_syscall+0x60/0x114 el0_svc_common+0x88/0xe4 do_el0_svc+0x24/0x30 el0_svc+0x40/0xa8 el0t_64_sync_handler+0x70/0xbc el0t_64_sync+0x1bc/0x1c0 Fix this by reading the inline data before allocating and adding the pclusters to the I/O chains.

In the Linux kernel, the following vulnerability has been resolved: hwrng: core - use RCU and work_struct to fix race condition Currently, hwrng_fill is not cleared until the hwrng_fillfn() thread exits. Since hwrng_unregister() reads hwrng_fill outside the rng_mutex lock, a concurrent hwrng_unregister() may call kthread_stop() again on the same task. Additionally, if hwrng_unregister() is called immediately after hwrng_register(), the stopped thread may have never been executed. Thus, hwrng_fill remains dirty even after hwrng_unregister() returns. In this case, subsequent calls to hwrng_register() will fail to start new threads, and hwrng_unregister() will call kthread_stop() on the same freed task. In both cases, a use-after-free occurs: refcount_t: addition on 0; use-after-free. WARNING: ... at lib/refcount.c:25 refcount_warn_saturate+0xec/0x1c0 Call Trace: kthread_stop+0x181/0x360 hwrng_unregister+0x288/0x380 virtrng_remove+0xe3/0x200 This patch fixes the race by protecting the global hwrng_fill pointer inside the rng_mutex lock, so that hwrng_fillfn() thread is stopped only once, and calls to kthread_run() and kthread_stop() are serialized with the lock held. To avoid deadlock in hwrng_fillfn() while being stopped with the lock held, we convert current_rng to RCU, so that get_current_rng() can read current_rng without holding the lock. To remove the lock from put_rng(), we also delay the actual cleanup into a work_struct. Since get_current_rng() no longer returns ERR_PTR values, the IS_ERR() checks are removed from its callers. With hwrng_fill protected by the rng_mutex lock, hwrng_fillfn() can no longer clear hwrng_fill itself. Therefore, if hwrng_fillfn() returns directly after current_rng is dropped, kthread_stop() would be called on a freed task_struct later. To fix this, hwrng_fillfn() calls schedule() now to keep the task alive until being stopped. The kthread_stop() call is also moved from hwrng_unregister() to drop_current_rng(), ensuring kthread_stop() is called on all possible paths where current_rng becomes NULL, so that the thread would not wait forever.

In the Linux kernel, the following vulnerability has been resolved: udf: fix partition descriptor append bookkeeping Mounting a crafted UDF image with repeated partition descriptors can trigger a heap out-of-bounds write in part_descs_loc[]. handle_partition_descriptor() deduplicates entries by partition number, but appended slots never record partnum. As a result duplicate Partition Descriptors are appended repeatedly and num_part_descs keeps growing. Once the table is full, the growth path still sizes the allocation from partnum even though inserts are indexed by num_part_descs. If partnum is already aligned to PART_DESC_ALLOC_STEP, ALIGN(partnum, step) can keep the old capacity and the next append writes past the end of the table. Store partnum in the appended slot and size growth from the next append count so deduplication and capacity tracking follow the same model.

In the Linux kernel, the following vulnerability has been resolved: ACPICA: Fix NULL pointer dereference in acpi_ev_address_space_dispatch() Cover a missed execution path with a new check.

In the Linux kernel, the following vulnerability has been resolved: ublk: Validate SQE128 flag before accessing the cmd ublk_ctrl_cmd_dump() accesses (header *)sqe->cmd before IO_URING_F_SQE128 flag check. This could cause out of boundary memory access. Move the SQE128 flag check earlier in ublk_ctrl_uring_cmd() to return -EINVAL immediately if the flag is not set.

In the Linux kernel, the following vulnerability has been resolved: apparmor: fix NULL pointer dereference in __unix_needs_revalidation When receiving file descriptors via SCM_RIGHTS, both the socket pointer and the socket's sk pointer can be NULL during socket setup or teardown, causing NULL pointer dereferences in __unix_needs_revalidation(). This is a regression in AppArmor 5.0.0 (kernel 6.17+) where the new __unix_needs_revalidation() function was added without proper NULL checks. The crash manifests as: BUG: kernel NULL pointer dereference, address: 0x0000000000000018 RIP: aa_file_perm+0xb7/0x3b0 (or +0xbe/0x3b0, +0xc0/0x3e0) Call Trace: apparmor_file_receive+0x42/0x80 security_file_receive+0x2e/0x50 receive_fd+0x1d/0xf0 scm_detach_fds+0xad/0x1c0 The function dereferences sock->sk->sk_family without checking if either sock or sock->sk is NULL first. Add NULL checks for both sock and sock->sk before accessing sk_family.

In the Linux kernel, the following vulnerability has been resolved: nfsd: never defer requests during idmap lookup During v4 request compound arg decoding, some ops (e.g. SETATTR) can trigger idmap lookup upcalls. When those upcall responses get delayed beyond the allowed time limit, cache_check() will mark the request for deferral and cause it to be dropped. This prevents nfs4svc_encode_compoundres from being executed, and thus the session slot flag NFSD4_SLOT_INUSE never gets cleared. Subsequent client requests will fail with NFSERR_JUKEBOX, given that the slot will be marked as in-use, making the SEQUENCE op fail. Fix this by making sure that the RQ_USEDEFERRAL flag is always clear during nfs4svc_decode_compoundargs(), since no v4 request should ever be deferred.

In the Linux kernel, the following vulnerability has been resolved: ext4: don't set EXT4_GET_BLOCKS_CONVERT when splitting before submitting I/O When allocating blocks during within-EOF DIO and writeback with dioread_nolock enabled, EXT4_GET_BLOCKS_PRE_IO was set to split an existing large unwritten extent. However, EXT4_GET_BLOCKS_CONVERT was set when calling ext4_split_convert_extents(), which may potentially result in stale data issues. Assume we have an unwritten extent, and then DIO writes the second half. [UUUUUUUUUUUUUUUU] on-disk extent U: unwritten extent [UUUUUUUUUUUUUUUU] extent status tree |<- ->| ----> dio write this range First, ext4_iomap_alloc() call ext4_map_blocks() with EXT4_GET_BLOCKS_PRE_IO, EXT4_GET_BLOCKS_UNWRIT_EXT and EXT4_GET_BLOCKS_CREATE flags set. ext4_map_blocks() find this extent and call ext4_split_convert_extents() with EXT4_GET_BLOCKS_CONVERT and the above flags set. Then, ext4_split_convert_extents() calls ext4_split_extent() with EXT4_EXT_MAY_ZEROOUT, EXT4_EXT_MARK_UNWRIT2 and EXT4_EXT_DATA_VALID2 flags set, and it calls ext4_split_extent_at() to split the second half with EXT4_EXT_DATA_VALID2, EXT4_EXT_MARK_UNWRIT1, EXT4_EXT_MAY_ZEROOUT and EXT4_EXT_MARK_UNWRIT2 flags set. However, ext4_split_extent_at() failed to insert extent since a temporary lack -ENOSPC. It zeroes out the first half but convert the entire on-disk extent to written since the EXT4_EXT_DATA_VALID2 flag set, but left the second half as unwritten in the extent status tree. [0000000000SSSSSS] data S: stale data, 0: zeroed [WWWWWWWWWWWWWWWW] on-disk extent W: written extent [WWWWWWWWWWUUUUUU] extent status tree Finally, if the DIO failed to write data to the disk, the stale data in the second half will be exposed once the cached extent entry is gone. Fix this issue by not passing EXT4_GET_BLOCKS_CONVERT when splitting an unwritten extent before submitting I/O, and make ext4_split_convert_extents() to zero out the entire extent range to zero for this case, and also mark the extent in the extent status tree for consistency.

In the Linux kernel, the following vulnerability has been resolved: rxgk: Fix potential integer overflow in length check Fix potential integer overflow in rxgk_extract_token() when checking the length of the ticket. Rather than rounding up the value to be tested (which might overflow), round down the size of the available data.

In the Linux kernel, the following vulnerability has been resolved: mm/mempolicy: fix memory leaks in weighted_interleave_auto_store() weighted_interleave_auto_store() fetches old_wi_state inside the if (!input) block only. This causes two memory leaks: 1. When a user writes "false" and the current mode is already manual, the function returns early without freeing the freshly allocated new_wi_state. 2. When a user writes "true", old_wi_state stays NULL because the fetch is skipped entirely. The old state is then overwritten by rcu_assign_pointer() but never freed, since the cleanup path is gated on old_wi_state being non-NULL. A user can trigger this repeatedly by writing "1" in a loop. Fix both leaks by moving the old_wi_state fetch before the input check, making it unconditional. This also allows a unified early return for both "true" and "false" when the requested mode matches the current mode. Reviewed by: Donet Tom <[email protected]>

In the Linux kernel, the following vulnerability has been resolved: RDMA/mana_ib: Disable RX steering on RSS QP destroy When an RSS QP is destroyed (e.g. DPDK exit), mana_ib_destroy_qp_rss() destroys the RX WQ objects but does not disable vPort RX steering in firmware. This leaves stale steering configuration that still points to the destroyed RX objects. If traffic continues to arrive (e.g. peer VM is still transmitting) and the VF interface is subsequently brought up (mana_open), the firmware may deliver completions using stale CQ IDs from the old RX objects. These CQ IDs can be reused by the ethernet driver for new TX CQs, causing RX completions to land on TX CQs: WARNING: mana_poll_tx_cq+0x1b8/0x220 [mana] (is_sq == false) WARNING: mana_gd_process_eq_events+0x209/0x290 (cq_table lookup fails) Fix this by disabling vPort RX steering before destroying RX WQ objects. Note that mana_fence_rqs() cannot be used here because the fence completion is delivered on the CQ, which is polled by user-mode (e.g. DPDK) and not visible to the kernel driver. Refactor the disable logic into a shared mana_disable_vport_rx() in mana_en, exported for use by mana_ib, replacing the duplicate code. The ethernet driver's mana_dealloc_queues() is also updated to call this common function.

In the Linux kernel, the following vulnerability has been resolved: tpm2-sessions: Fix missing tpm_buf_destroy() in tpm2_read_public() tpm2_read_public() calls tpm_buf_init() but fails to call tpm_buf_destroy() on two exit paths, leaking a page allocation: 1. When name_size() returns an error (unrecognized hash algorithm), the function returns directly without destroying the buffer. 2. On the success path, the buffer is never destroyed before returning. All other error paths in the function correctly call tpm_buf_destroy() before returning. Fix both by adding the missing tpm_buf_destroy() calls.

In the Linux kernel, the following vulnerability has been resolved: ibmasm: fix heap over-read in ibmasm_send_i2o_message() The ibmasm_send_i2o_message() function uses get_dot_command_size() to compute the byte count for memcpy_toio(), but this value is derived from user-controlled fields in the dot_command_header (command_size: u8, data_size: u16) and is never validated against the actual allocation size. A root user can write a small buffer with inflated header fields, causing memcpy_toio() to read up to ~65 KB past the end of the allocation into adjacent kernel heap, which is then forwarded to the service processor over MMIO. Silently clamping the copy size is not sufficient: if the header fields claim a larger size than the buffer, the SP receives a dot command whose own header is inconsistent with the I2O message length, which can cause the SP to desynchronize. Reject such commands outright by returning failure. Validate command_size before calling get_mfa_inbound() to avoid leaking an I2O message frame: reading INBOUND_QUEUE_PORT dequeues a hardware frame from the controller's free pool, and returning without a corresponding set_mfa_inbound() call would permanently exhaust it. Additionally, clamp command_size to I2O_COMMAND_SIZE before the memcpy_toio() so the MMIO write stays within the I2O message frame, consistent with the clamping already performed by outgoing_message_size() for the header field.

In the Linux kernel, the following vulnerability has been resolved: wifi: mwifiex: fix use-after-free in mwifiex_adapter_cleanup() The mwifiex_adapter_cleanup() function uses timer_delete() (non-synchronous) for the wakeup_timer before the adapter structure is freed. This is incorrect because timer_delete() does not wait for any running timer callback to complete. If the wakeup_timer callback (wakeup_timer_fn) is executing when mwifiex_adapter_cleanup() is called, the callback will continue to access adapter fields (adapter->hw_status, adapter->if_ops.card_reset, etc.) which may be freed by mwifiex_free_adapter() called later in the mwifiex_remove_card() path. Use timer_delete_sync() instead to ensure any running timer callback has completed before returning.

An issue in Dolibarr ERP/CRM v.22.0.0 through v.22.0.4 and v.24.0.0-alpha allows a remote attacker to execute arbitrary code via the htdocs/core/class/commonobject.class.php.

OpenRapid RapidCMS v1.3.1 was discovered to contain an authentication bypass in the /template/default/menu.php component. This vulnerability is exploited via injecting a crafted SQL payload into the name cookie parameter.

In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix rxkad crypto unalignment handling Fix handling of a packet with a misaligned crypto length. Also handle non-ENOMEM errors from decryption by aborting. Further, remove the WARN_ON_ONCE() so that it can't be remotely triggered (a trace line can still be emitted).

In the Linux kernel, the following vulnerability has been resolved: gfs2: fix memory leaks in gfs2_fill_super error path Fix two memory leaks in the gfs2_fill_super() error handling path when transitioning a filesystem to read-write mode fails. First leak: kthread objects (thread_struct, task_struct, etc.) When gfs2_freeze_lock_shared() fails after init_threads() succeeds, the created kernel threads (logd and quotad) are never destroyed. This occurs because the fail_per_node label doesn't call gfs2_destroy_threads(). Second leak: quota bitmap buffer (8192 bytes) When gfs2_make_fs_rw() fails after gfs2_quota_init() succeeds but before other operations complete, the allocated quota bitmap is never freed. The fix moves thread cleanup to the fail_per_node label to handle all error paths uniformly. gfs2_destroy_threads() is safe to call unconditionally as it checks for NULL pointers. Quota cleanup is added in gfs2_make_fs_rw() to properly handle the withdrawal case where quota initialization succeeds but the filesystem is then withdrawn. Thread leak backtrace (gfs2_freeze_lock_shared failure): unreferenced object 0xffff88801d7bca80 (size 4480): copy_process+0x3a1/0x4670 kernel/fork.c:2422 kernel_clone+0xf3/0x6e0 kernel/fork.c:2779 kthread_create_on_node+0x100/0x150 kernel/kthread.c:478 init_threads+0xab/0x350 fs/gfs2/ops_fstype.c:611 gfs2_fill_super+0xe5c/0x1240 fs/gfs2/ops_fstype.c:1265 Quota leak backtrace (gfs2_make_fs_rw failure): unreferenced object 0xffff88812de7c000 (size 8192): gfs2_quota_init+0xe5/0x820 fs/gfs2/quota.c:1409 gfs2_make_fs_rw+0x7a/0xe0 fs/gfs2/super.c:149 gfs2_fill_super+0xfbb/0x1240 fs/gfs2/ops_fstype.c:1275