CVE Feed

SEPPmail Secure Email Gateway before 15.1.1 processes and writes v1 file-interface upload data before authenticating the caller and without an absolute request-size limit. An unauthenticated remote attacker can occupy workers and consume temporary storage with concurrent or slow requests, causing service unavailability.

SEPPmail Secure Email Gateway before 15.1.1 trusts a file path supplied in externally provided Large File Transfer attachment metadata. An unauthenticated remote sender can cause the mail-processing worker to disclose, move, or delete an accessible regular file when LFT is enabled and the message reaches an affected secure-mail processing path. The validated workers ran as root.

SEPPmail Secure Email Gateway before 15.1.1 can evaluate attacker-influenced replacement text as Perl code in sender or recipient replacement rules. An unauthenticated remote sender can execute operating-system commands in the mail-processing worker context when an active rule uses message-derived replacement data and its search condition matches. The validated worker context was root.

Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in TÜBİTAK BİLGEM Software Technologies Research Institute İmzager allows Path Traversal. This issue affects İmzager: from 2.10.5 before 2.10.7.

Improper restriction of XML external entity reference vulnerability in TÜBİTAK BİLGEM Software Technologies Research Institute İmzager allows Serialized Data External Linking. This issue affects İmzager: from 2.10.5 before 2.10.7.

Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Aguila Technologies WP Customer Area customer-area allows Reflected XSS.This issue affects WP Customer Area: from n/a through 8.4.1.

Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in AdvancedCoding wpDiscuz wpdiscuz allows Stored XSS.This issue affects wpDiscuz: from n/a through 7.6.73.

Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Unlimited Elements Unlimited Elements For Elementor (Free Widgets, Addons, Templates) unlimited-elements-for-elementor allows Reflected XSS.This issue affects Unlimited Elements For Elementor (Free Widgets, Addons, Templates): from n/a through 2.0.26.

Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Aguila Technologies WP Customer Area customer-area allows Reflected XSS.This issue affects WP Customer Area: from n/a through 8.4.1.

Allocation of Resources Without Limits or Throttling vulnerability in miniOrange SAML SP Single Sign On miniorange-saml-20-single-sign-on allows HTTP DoS.This issue affects SAML SP Single Sign On: from n/a through 6.1.0.

Authentication Bypass Using an Alternate Path or Channel vulnerability in RelyWP Simple Cloudflare Turnstile simple-cloudflare-turnstile allows Authentication Abuse.This issue affects Simple Cloudflare Turnstile: from n/a through 1.44.1.

Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Roland Murg WP Booking System wp-booking-system allows Reflected XSS.This issue affects WP Booking System: from n/a through 2.1.0.6.

Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Jacob N. Breetvelt WP Photo Album Plus wp-photo-album-plus allows Stored XSS.This issue affects WP Photo Album Plus: from n/a through 9.3.05.003.

Insertion of Sensitive Information into Externally-Accessible File or Directory vulnerability in Doofinder Doofinder for WooCommerce doofinder-for-woocommerce allows Retrieve Embedded Sensitive Data.This issue affects Doofinder for WooCommerce: from n/a through 2.17.2.

Resource exhaustion vulnerability in the HTTP request handling of the QHttpServer component of Qt HTTP Server.

Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Awesomemotive Contact Form by WPForms wpforms-lite allows Reflected XSS.This issue affects Contact Form by WPForms: from n/a through 2.0.3.

Missing Authorization vulnerability in WC Lovers WCFM Marketplace wc-multivendor-marketplace allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects WCFM Marketplace: from n/a through 3.8.2.

Herowatch Mini developed by About Time Technologies has a system signing vulnerability. Authenticated local attackers can exploit a publicly available test key to sign malicious programs, allowing them to elevate privileges and execute arbitrary code.

Herowatch Go Server developed by About Time Technologies has a Insecure Direct Object Reference vulnerability. Authenticated remote attackers can modify specific parameters to access or operate other users' data and functions.

Herowatch Mini developed by About Time Technologies has a Missing Authentication vulnerability. Unauthenticated remote attackers can connect to the affected device's ADB service and obtain an ADB shell, thereby accessing device resources or performing related operations.

The Mbed TLS crypto shim driver in drivers/crypto/crypto_mbedtls_shim.c drives PSA multipart cipher and AEAD operations. In mbedtls_cbc() and mbedtls_aead(), every error path after a successful psa_cipher_encrypt_setup() / psa_aead_decrypt_setup() returned directly without calling psa_cipher_abort() / psa_aead_abort(). Because the abort is the only thing that reaches mbedtls_cipher_free(), each failed operation permanently leaked the heap-allocated mbedtls_aes_context (roughly 288 bytes) that setup had allocated from Mbed TLS's fixed static heap (_mbedtls_heap[CONFIG_MBEDTLS_HEAP_SIZE], default 512 bytes). With CONFIG_PSA_CRYPTO_PROVIDER_TFM the leaked object is instead a finite secure-partition multipart-operation slot. The failure is chosen by an unauthenticated attacker. With CONFIG_NET_L2_IEEE802154_SECURITY backed by this driver, ieee802154_decrypt_auth() in subsys/net/l2/ieee802154/ieee802154_security.c invokes cipher_ccm_op() on every received secured frame, with no authentication ahead of the MIC check. A device in radio range can transmit a stream of syntactically valid 802.15.4 frames carrying a bogus MIC; each one makes psa_aead_verify() fail and leaks a block. The CBC path is reachable the same way through the OSDP secure channel, where CONFIG_OSDP_SC_ENABLED selects this shim and osdp_encrypt() / osdp_decrypt() leave out_buf_max unset, so every operation fails inside psa_cipher_update(). Exhausting the Mbed TLS heap — which the default configuration reaches after a couple of failed operations, and any realistic configuration reaches in well under a second of frames — makes all subsequent mbedtls_calloc() calls fail. Every later cryptographic operation in the image then fails permanently, including link-layer security and any TLS/DTLS sharing the same heap, until the device is rebooted. There is no memory corruption or information disclosure: frames with an invalid MIC are still rejected, so the impact is limited to availability. The fix routes all post-setup failures in mbedtls_cbc() and mbedtls_aead() through a common error: label that calls the matching PSA abort before returning. Setup failures need no change, since the PSA core aborts the operation itself when setup fails.

The entropy-device random number generator in subsys/random/random_entropy_device.c returned early with -ENODEV from rand_get() as soon as device_is_ready() failed, before reaching the non-cryptographic system-timer fallback further down the same function. Because z_impl_sys_rand_get() returns void and discards that error — and the public sys_rand_get() syscall is itself declared void, so it cannot report failure — the caller's output buffer was left untouched and its previous contents were handed back as random data. The thin wrappers make this a plain uninitialized read: sys_rand32_get() declares uint32_t ret;, calls sys_rand_get(&ret, sizeof(ret)) and returns ret. The "not ready" state is a normal runtime condition rather than a fault. Entropy drivers initialise at PRE_KERNEL_1 with CONFIG_ENTROPY_INIT_PRIORITY (default 50), so any earlier initialiser — kernel objects run at priority 30 — observes an unready device; the sibling generator subsys/random/random_xoshiro128.c and z_early_rand_get() in kernel/init.c both already carried an explicit timer fallback for exactly this case. The state is also permanent for the boot when an entropy driver's init hook fails, which several in-tree drivers can do on real hardware (entropy_stm32 on an RNG clock configuration error, entropy_psa_crypto when psa_crypto_init() fails, entropy_nrf_cracen, entropy_esp32, entropy_virtio). When this occurs, every non-cryptographic random value in the system is either a constant or stale memory. coap_next_token() in subsys/net/lib/coap/coap.c fills a static buffer, so every CoAP token becomes the same .bss constant; tcp_init_isn() in subsys/net/ip/tcp.c returns an uninitialized stack word as the TCP initial sequence number; DHCPv4/DHCPv6 transaction IDs, WebSocket masking keys and RTP SSRCs are similarly degraded, and arch/arm64/core/pac.c derives per-thread Pointer Authentication keys from the same source. Where the bytes are transmitted directly — SSH packet padding, the netmidi2 session nonce, a DTLS connection ID on builds without CONFIG_CSPRNG_ENABLED — stale caller stack or heap contents are disclosed on the wire. The fix initialises ret to -ENODEV and only calls entropy_get_entropy() when the device is ready, so the not-ready case now falls through to the timer fallback and the buffer is always written. The cryptographically secure path is unchanged: sys_csrand_get() still propagates the error to the caller and never silently degrades. An attacker cannot induce the unready state, but can observe and exploit the resulting non-random values remotely on an affected device.

The RTIO submission-queue verifier rtio_vrfy_sqe() in subsys/rtio/rtio_syscalls.c (subsys/rtio/rtio_handlers.c before v4.3.0) accumulated the results of K_SYSCALL_MEMORY() into its valid_sqe flag with &=. That macro returns nonzero on failure (it is built on K_SYSCALL_VERIFY_MSG(), which yields !(expr)), so every buffer permission check contributed the opposite of its result. A submission whose tx.buf, rx.buf or txrx.tx_buf/txrx.rx_buf pointer was not accessible to the calling thread was accepted, while a legitimate, thread-owned buffer caused the calling thread to be killed with a kernel oops. The verifier runs on behalf of the rtio_sqe_copy_in_get_handles() system call (also reached through the inline rtio_sqe_copy_in() wrapper), so it is driven directly by untrusted user-mode input on any image built with CONFIG_USERSPACE. A user thread that has been granted an RTIO context and an rtio_iodev object — the intended usage of RTIO userspace support, established via rtio_access_grant() — can submit an SQE whose buffer pointer and length name arbitrary kernel memory; the object check on sqe->iodev is unaffected and still passes, and the crafted SQE is forwarded to the bus driver unchanged. Downstream consumers dereference the pointer with supervisor privilege. The generic I2C and I3C RTIO fallback handlers (drivers/i2c/i2c_rtio_default.c, drivers/i3c/i3c_rtio_default.c) copy sqe.rx.buf/sqe.tx.buf into struct i2c_msg and call i2c_transfer(), and the vendor SPI/I2C RTIO drivers behave equivalently. An RTIO_OP_RX submission therefore has peripheral data written into kernel memory of the attacker's choosing (arbitrary kernel write), an RTIO_OP_TX submission clocks kernel memory out over the bus (kernel memory disclosure), and a pointer to unmapped memory faults the kernel. This is a full escape from the user-mode isolation boundary that CONFIG_USERSPACE exists to enforce. The defect was masked for years because the in-tree user-mode RTIO tests only exercise RTIO_OP_NOP and mempool-backed reads, neither of which reaches the affected checks. The fix negates each K_SYSCALL_MEMORY() result and additionally validates the TXRX transmit buffer read-only, matching the SPI, I2C and I3C handlers.

The nRF link-layer receive paths of the open-source Bluetooth LE Controller did not validate the on-air LENGTH field of a received PDU against the maximum receive length that was used to program the radio. isr_rx_pdu() in subsys/bluetooth/controller/ll_sw/nordic/lll/lll_conn.c enqueued any non-empty data PDU after only the sequence-number and (for encrypted links) MIC checks, and the corresponding isr_rx() handlers in lll_central_iso.c, lll_peripheral_iso.c, lll_sync_iso.c and lll_scan_aux.c did the same for ISO and extended-advertising PDUs. The nRF radio stores the received header verbatim and truncates only the payload at PCNF1.MAXLEN, so a frame declaring more octets than were configured leaves a node buffer whose len field describes more data than the buffer holds. An attacker within radio range that can emit a hand-crafted link-layer PDU — for a connection, any peer that establishes an unencrypted LE connection to a connectable advertiser; for CONFIG_BT_CTLR_SYNC_ISO, any broadcaster the device is synchronised to — can set the length byte up to 255 while the controller has programmed a much smaller maximum (lll->dle.eff.max_rx_octets, which is 27 until a Data Length Update, or the negotiated cis_lll->rx.max_pdu). No pairing, authentication or user interaction is required. On encrypted links the CCM MIC check normally rejects such a frame first, so the exposure is on unencrypted traffic, which is why the added check is placed after decryption. The unchecked length reaches hci_acl_encode() in subsys/bluetooth/controller/hci/hci.c, which performs net_buf_add(buf, pdu_data->len) followed by a memcpy() of that many bytes out of the node_rx pool element. Because CONFIG_BT_CTLR_DATA_LENGTH_MAX and CONFIG_BT_BUF_ACL_RX_SIZE both default to 27, this is an out-of-bounds read of up to roughly 228 bytes past the received PDU and a corresponding out-of-bounds write past the HCI ACL buffer into neighbouring buffers of the same pool; the tailroom test in net_buf_simple_add() is only enforced when CONFIG_NET_BUF_HARDENING (or CONFIG_ASSERT) is enabled. On the ISO paths the same unchecked length makes isoal_rx_append_to_sdu() read past the ISO node buffer and emit adjacent controller RAM to the host as ISO data. The practical result is remote memory corruption and controller crashes, plus disclosure of controller memory into the host data path. The fix rejects any received PDU whose length exceeds the value that was used to configure the radio reception. Note that lll_sync.c (periodic advertising sync reception) was not changed and still enqueues received PDUs without an equivalent bound.

The user-mode syscall verifier z_vrfy_i2s_configure() in drivers/i2s/i2s_handlers.c copies the caller's struct i2s_config in from user memory and then, when cfg->frame_clk_freq is 0 (the API's "unconfigure the stream" request), jumps straight to z_impl_i2s_configure() without performing the K_SYSCALL_OBJ(config.mem_slab, K_OBJ_MEM_SLAB) ownership/type check or the block_size sanity check. The mem_slab field is a struct k_mem_slab *, so on that path a completely unvalidated, user-chosen pointer reaches driver code that is entitled to trust it as a real kernel object. Any thread running under CONFIG_USERSPACE that has access to an I2S device object can trigger this with a single i2s_configure() call. Most in-tree drivers special-case frame_clk_freq == 0 and never store the caller's structure, but drivers/i2s/i2s_litex.c does not: i2s_litex_configure() only logs a warning for a mismatched frame clock, then memcpy()s the caller's config into stream->cfg and marks the stream I2S_STATE_READY. A subsequent i2s_trigger() with I2S_TRIGGER_START enables the FIFO interrupt, and the interrupt handlers i2s_litex_isr_rx() / i2s_litex_isr_tx() then call k_mem_slab_alloc() and k_mem_slab_free() on the attacker-supplied pointer in supervisor context. The result is an arbitrary-pointer read/write primitive executed by the kernel on behalf of an unprivileged thread — k_mem_slab_alloc() takes a spinlock at slab->lock and reads and writes slab->free_list and the link word inside the returned "block" — which defeats the CONFIG_USERSPACE isolation boundary entirely. The same missing validation is a hazard for out-of-tree I2S drivers that retain the configuration on the unconfigure path. Builds without CONFIG_USERSPACE are unaffected, since the verifier is not used. The fix zeroes config.mem_slab and config.block_size on the unconfigure path so the driver can never receive an unvalidated pointer, while still allowing a stream to be unconfigured by a caller that does not own a memory slab, as the API documents.

The user-mode verification handler for the i3c_transfer() system call, z_vrfy_i3c_transfer() in drivers/i3c/i3c_handlers.c, validated the caller-supplied struct i3c_device_desc in place instead of snapshotting it. It confirmed only that the descriptor was readable by the calling thread (K_SYSCALL_MEMORY_READ()), read target->bus once to check it with K_SYSCALL_OBJ(), and then passed the caller's live pointer down. The implementation z_impl_i3c_transfer() re-reads target->bus from that user memory and dispatches through it as DEVICE_API_GET(i3c, target->bus)->i3c_xfers(...), so the bus that was validated is not necessarily the bus that is used. DEVICE_API_GET() performs no runtime type check outside CONFIG_DEVICE_API_ASSERT builds. On a build with CONFIG_USERSPACE and an I3C controller driver, a user thread that has been granted an I3C device object can exploit this with a second thread in the same memory domain: one thread calls i3c_transfer() while the other rewrites the bus field of the descriptor. The window between the check and the use spans the num_msgs validation, the message-array access check, a stack VLA allocation and a memcpy() of up to 32 struct i3c_msg, so the race is repeatable and can simply be retried until it lands. When the substitution succeeds, the kernel dereferences an attacker-chosen pointer as a struct device, loads a function pointer from the attacker-controlled api table and calls it in supervisor mode with attacker-influenced arguments. This yields kernel-mode code execution from an unprivileged user thread — a complete escape of the userspace memory-protection sandbox; lesser outcomes are an arbitrary two-level kernel read or a kernel fault. Builds without CONFIG_USERSPACE, or without an I3C driver, are unaffected. The fix copies the descriptor into a kernel-stack local with k_usermode_from_copy(), validates the bus in that copy, and dispatches on the copy, so the validated value is provably the value used.

Two RTIO syscall verifiers, in subsys/rtio/rtio_syscalls.c (subsys/rtio/rtio_handlers.c before v4.3.0), did not validate user-supplied pointers before the kernel wrote through them. z_vrfy_rtio_sqe_cancel() performed no validation at all. It passed the caller's struct rtio_sqe pointer straight to z_impl_rtio_sqe_cancel(), which converts it with CONTAINER_OF to a struct rtio_iodev_sqe, ORs RTIO_SQE_CANCELED (BIT(3)) into its 16-bit flags field in supervisor mode, then loads its next pointer and repeats until that pointer is NULL. The syscall takes no RTIO context argument, so it needs no object grant: any user-mode thread on a CONFIG_USERSPACE build can set that bit in a 16-bit word at an address of its choosing in kernel memory, and the kernel continues the write along whatever pointer chain it finds at the corresponding offset. Setting chosen bits in kernel data structures, such as object permission or thread state fields, can be used to escalate privilege from user mode. z_vrfy_rtio_sqe_copy_in_get_handles() validated its RTIO context and the input SQE array, but only NULL-checked the handle out-parameter before writing a kernel SQE pointer through it, with no K_SYSCALL_MEMORY_WRITE check. A user thread that holds a granted RTIO context can therefore make the kernel store a pointer value at an arbitrary address. The fixes validate the handle out-parameter as writable, bound the cancel handle to real submission-pool storage, and require permission on the RTIO context that owns the matching pool. Without that last check a bounded handle still let any user thread cancel submissions belonging to other contexts, silently aborting their I/O. Systems built without CONFIG_USERSPACE or without CONFIG_RTIO are unaffected.

The Bluetooth Classic AVDTP layer defers releasing a session's stream endpoints: bt_avdtp_l2cap_disconnected() in subsys/bluetooth/host/classic/avdtp.c ends with k_work_submit(&session->_release_work), placing the embedded struct k_work on the system work queue's pending list. When the same struct bt_avdtp object is immediately reused for a new signalling connection, the session memory is re-initialized — a2dp_get_connection() in subsys/bluetooth/host/classic/a2dp.c memset()s the whole struct bt_a2dp, and bt_avdtp_l2cap_accept() / bt_avdtp_connect() call k_work_init() on session->_release_work — while that work item is still linked into k_sys_work_q.pending. Zeroing a linked sys_snode_t truncates the list while its tail pointer keeps pointing past the truncation. The reuse window is deterministic rather than a race. All host RX processing runs on the Bluetooth RX work queue at a cooperative priority (CONFIG_BT_RX_PRIO), while _release_work is submitted to the lower-priority system work queue, so the release handler cannot run until the RX thread blocks. Because l2cap_br_recv() processes every signalling command contained in a single L2CAP signalling PDU back-to-back, a peer can send one PDU holding an L2CAP Disconnection Request for the AVDTP signalling channel followed by a Connection Request for PSM 0x0019; the second command reaches the session-reuse path with the release work provably still queued. The peer must already hold an encrypted AVDTP signalling channel, i.e. be a paired/bonded BR/EDR device. The result is corruption of the global system work queue's pending list: either the queue silently stops executing any work at all (subsequent submissions are appended to a chain the head can no longer reach, and the orphaned items keep their K_WORK_QUEUED flag forever) or, in the tail variant, the list acquires a self-referencing node that the queue thread spins on. The written values are pointers to other struct k_work objects and are not attacker-controlled, so the impact is a device-wide, reboot-required denial of service rather than a controllable write primitive. Only builds with CONFIG_BT_CLASSIC and CONFIG_BT_A2DP are affected. The fix is a two-commit unit, and neither commit closes the path on its own. ec822ceed83b adds a pending-release check to bt_avdtp_connect() and bt_avdtp_l2cap_accept(), but the A2DP upper layer's a2dp_get_connection() memset()s the session — including the queued work item's list node and flags — before those checks run, so k_work_busy_get() would observe an already-cleared state. 2bd5ea88c69b closes that by making a2dp_get_connection() itself skip the reuse and return NULL while the release work is still pending, which both callers already handle by rejecting the connection attempt. Apply both commits together; either one alone leaves the device vulnerable.

The VikWidgetsLoader WordPress plugin before 1.12.3 does not sanitise or escape several block attributes before outputting them inside HTML attributes, allowing users with the Contributor role to store arbitrary JavaScript that executes in the browser of any user viewing the affected post, including the administrator or editor who reviews the pending submission.

The All-in-One Video Gallery WordPress plugin before 5.0.0 does not validate and escape some of its shortcode attributes before outputting them back in a page/post where the shortcode is embedded, which could allow users with the contributor role and above to perform Stored Cross-Site Scripting attacks.

The Simple Download Monitor WordPress plugin before 4.1.3 does not properly check the visibility of the content referenced by one of its shortcodes, allowing users with a role as low as Contributor to disclose the title and description of private, draft and other non-public posts.

The EventPrime WordPress plugin before 4.3.6.1 does not keep the built-in Pending Review post status non-public, allowing unauthenticated users to view posts, pages and other content that are awaiting review.

The Stape Conversion Tracking WordPress plugin before 2.3.11 does not validate the sub-path appended to its same-origin proxy's upstream endpoint, allowing unauthenticated visitors to redirect the server-side request to an arbitrary host and have the response body and its content type returned from the site's own origin with security response headers stripped, leading to Server-Side Request Forgery, including loopback and internal hosts, and Cross-Site Scripting.

The Premium Packages WordPress plugin before 7.3.1 does not verify that a user claiming a guest order is the original buyer, allowing any authenticated user to take ownership of any unclaimed guest order, and thereby read the buyer's billing details and download their purchased files, by supplying only the order identifier.

The Premium Packages WordPress plugin before 7.3.1 does not verify ownership or session binding when loading a previously saved shopping cart, allowing any unauthenticated user who obtains another shopper's saved-cart identifier to load that shopper's cart contents, including selected products, quantities and buyer-entered custom field data, into their own session.

The Premium Packages WordPress plugin before 7.3.1 does not verify that the requester owns a guest order before returning its details, allowing unauthenticated visitors who know a guest order's identifier to view its order status, payment status and total.

The WPvivid — Backup, Migration & Staging WordPress plugin before 0.9.138 does not properly validate a backup storage directory path before using it to create directories and write files, allowing administrators to cause those directories and files to be created outside the intended backup location via path traversal.

The Duplicator WordPress plugin before 5.1.0, duplicator-pro WordPress plugin before 5.1.0 does not restrict its database charset and collation rewrite to schema statements during a restore, so a value a Subscriber stores in their own profile can break out of its string literal and inject SQL into the restore's INSERT statement when an administrator restores the backup onto a server lacking one of the source's charsets or collations.

The WP Roster WordPress plugin before 2.36 does not perform any capability or nonce checks before writing its stored roster data, allowing unauthenticated attackers to overwrite, wipe or restore the content of any roster.

The Text Typing WordPress plugin before 2.2.2 does not properly sanitize and escape a block attribute before storing it and later outputting it into a page element that is read and rendered by client-side script, allowing users with the Contributor role and above to perform Stored Cross-Site Scripting attacks that execute in the browser of anyone viewing the affected page.

The WPvivid — Backup, Migration & Staging WordPress plugin before 0.9.137 does not validate the extension of the file it actually stores when handling an import upload: it checks the extension of a separate request field while saving the uploaded file itself with WordPress's upload type-checking disabled, so an authenticated administrator can store a file with an arbitrary extension, including a PHP file, in the WPvivid — Backup, Migration & Staging WordPress plugin before 0.9.137's import directory. This is an incomplete fix of CVE-2025-5961, whose extension check was applied to the wrong value.

The WPvivid — Backup, Migration & Staging WordPress plugin before 0.9.137 does not sanitize the staging destination folder supplied to its staging-start handler, applying only a generic text filter while the sibling writability-check handler applies the correct filename sanitizer, so an authenticated administrator can supply a path containing traversal sequences and make the WPvivid — Backup, Migration & Staging WordPress plugin before 0.9.137 write the copied site files outside the WordPress installation directory.

The WPvivid — Backup, Migration & Staging WordPress plugin before 0.9.137 does not verify that a submitted snapshot identifier names a snapshot it actually created before using it as a database table-name prefix, so an authenticated administrator can supply the site's table prefix, or any other string, and cause the WPvivid — Backup, Migration & Staging WordPress plugin before 0.9.137 to drop every matching table, including the core WordPress tables, destroying the site's database.

The Enable Media Replace WordPress plugin before 4.2.3 does not pass a replaced media file through the WordPress upload pipeline, so the upload prefilter that SVG-sanitizer Enable Media Replace WordPress plugin before 4.2.3 rely on never runs, allowing an authenticated user with upload access to store an SVG file containing script that executes when the file is opened directly. It requires an SVG-enabling Enable Media Replace WordPress plugin before 4.2.3 to be active, as the replace path otherwise rejects SVG uploads.

The Duplicator WordPress plugin before 5.1.0, duplicator-pro WordPress plugin before 5.1.0 does not prevent direct access to some of its bundled PHP files, which initialise without their expected context, trigger a fatal error, and return a stack trace that discloses the server's absolute filesystem paths to unauthenticated users.

The Duplicator WordPress plugin before 5.1.0, duplicator-pro WordPress plugin before 5.1.0 does not sanitise and escape a parameter before reflecting it on one of its administrative pages in certain configurations, leading to Reflected Cross-Site Scripting that executes in the session of a logged-in administrator who is tricked into opening a crafted link.

The WP Remote Users Sync WordPress plugin before 2.2.0 does not adequately restrict access to the user export files it writes beneath the public web root, relying on an Apache access-control file that other web servers such as Nginx ignore, which allows an unauthenticated attacker who requests the export's predictable file name while it is present to retrieve the exported users' personal data.

The Post Duplicator WordPress plugin before 3.0.17 does not check whether the requesting user may view each post before returning a list of posts for a post type, allowing users with a role as low as Contributor to read the titles and hierarchy of other users' draft and private posts.

The Essential Real Estate WordPress plugin before 5.3.5 does not verify that a media attachment belongs to the requesting user before deleting it, allowing a self-registered customer-level user to delete other users' media library attachments, including those owned by administrators.

The PowerPack Addons for Elementor: Widgets, Form Styler and Templates WordPress plugin before 3.1.3 does not validate a user-supplied URL before using it in a server-side HTTP request, which could allow users with the contributor role and above to perform Server-Side Request Forgery attacks against internal and loopback resources and read the response back.