CVE Feed

An out-of-bounds read vulnerability was discovered in the Bosch BME690 SensorAPI (C-driver) in version v1.0.3 and prior, specifically within the field data parsing logic in read_all_field_data (bme69x.c). The driver prefetches heater configuration registers into a contiguous 30-byte stack buffer (set_val) mapping IDAC, RES_HEAT, and GAS_WAIT tables. When parsing sensor field data, the gas_index is extracted using a 4-bit mask (0..15) but lacks boundary verification against the valid range (0..9). An attacker or a compromised peripheral mimicking a sensor on the I2C/SPI bus could return a payload with a gas index value of 10 or higher. This causes the driver to perform an out-of-bounds array access (set_val[20 + gas_index]), reading up to 6 bytes past the stack buffer. The leaked out-of-bounds byte is then written into the public gas_wait field, which may lead to measurement corruption or leak adjacent stack memory when telemetered or logged.

A stack-based buffer overflow vulnerability exists in the Bosch Sensortec BHI385 SensorAPI (C library) within the debug message parser function bhi385_parse_debug_message (located in bhi385_parse.c). The function parses FIFO events and extracts an 8-bit message length directly from the attacker-controlled event payload (callback_info->data_ptr[0]) without enforcing bounds checks or clamping the value. When copying the payload into a fixed-size stack buffer of 17 bytes (uint8_t debug_msg[17]) via memcpy, providing a length byte greater than 16 causes the function to write past the allocated stack boundary. This memory corruption can be triggered by a malicious or compromised sensor or bus participant, leading to a firmware crash, Denial of Service (DoS), or potentially the execution of arbitrary code via adjacent stack data corruption.

A stack-based buffer overflow vulnerability exists in the Bosch Sensortec BHI360 SensorAPI(C-Library) in versions up to and including commit d6b200416a. The vulnerability is located within the FIFO parsing and debug logging subsystem inside the function bhi360_parse_debug_message() in bhi360_parse.c (lines 1852-1875). The parser trusts the first payload byte of a debug frame as the message length (msg_length) and copies that many bytes into a fixed-size 17-byte stack buffer (debug_msg) via memcpy without performing any bounds checking. A locally or physically positioned attacker (e.g., via a malicious sensor, counterfeit hardware module, or a Man-in-the-Middle on the communication bus) can exploit this vulnerability by injecting a crafted debug frame with a length byte exceeding 16. This corrupts adjacent stack data, including the saved return address. Furthermore, because the overflowed buffer is subsequently passed to a printf-style logging sink, the attacker can supply format string specifiers (e.g., %n) to execute arbitrary code on the host microcontroller/SoC or cause a reliable system crash (Denial of Service).

URL redirection to untrusted site ('open redirect') vulnerability in Armiya Information Technologies Ltd. Co. Access Control System allows Fake the Source of Data. This issue affects Access Control System: before Versiyon 2.

A vulnerability in the Gemini CLI and associated GitHub Action allowed an unprivileged attacker to achieve an arbitrary code execution in Gemini CLI via untrusted local .env files overriding GEMINI_CLI_HOME.

GeoVision GV-LPC2211 V1.14 (260903) allows unauthenticated clients to declare unbounded VLSVR frame lengths and indefinitely delay blocking receives, allowing remote exhaustion of memory, connection, and worker resources.

GeoVision GV-LPC2211 V1.14 (260903) fails to validate attacker-controlled variable-length fields before copying them into fixed-size stack buffers in multiple VLSVR request handlers, allowing an unauthenticated remote attacker to crash the VLSVR service.

GeoVision GV-LPC2211 V1.13 fails to restrict the filename supplied to BKDownloadLink.cgi, allowing a remote user with valid web credentials to read arbitrary files accessible to the root-run web service.

GeoVision GV-LPC2211 V1.13 fails to bound the number of Scopes tokens in unauthenticated ONVIF WS-Discovery Probe requests, allowing a remote attacker to corrupt stack control state and crash the discovery process.

GeoVision GV-LPC2211 V1.13 improperly manages PTZ connection state, allowing an unauthenticated remote client to block the accept loop and prevent new PTZ connections.

GeoVision GV-LPC2211 V1.13 exposes a network-accessible PTZ control service without authentication, allowing remote clients to retrieve PTZ information and issue PTZ or raw serial commands.

GeoVision GV-LPC2211 V1.13 fails to limit repeated User elements in ONVIF SetUser requests, allowing an authenticated administrator to overwrite stack control state and crash the ONVIF worker.

GeoVision GV-LPC2211 V1.13 fails to limit repeated User elements in ONVIF CreateUsers requests, allowing an authenticated administrator to overwrite stack control state and crash the ONVIF worker.

GeoVision GV-LPC2211 V1.13 allows an administrator-controlled FTP username containing shell metacharacters to be executed as arbitrary root commands during a subsequent FTP-account update.

GeoVision GV-LPC2211 V1.13 fails to limit repeated Username elements in ONVIF DeleteUsers requests, allowing an authenticated administrator to overflow a stack array and crash the ONVIF worker.

GeoVision GV-LPC2211 V1.13 copies an oversized ONVIF SetUser password into a fixed stack field, allowing an authenticated administrator to crash the ONVIF worker.

GeoVision GV-LPC2211 V1.13 copies oversized ONVIF CreateUsers username or password values into fixed stack fields, allowing an authenticated administrator to crash the ONVIF worker.

GeoVision GV-LPC2211 V1.13 fails to enforce WS-Security UsernameToken freshness or nonce reuse protection, allowing a captured PasswordDigest token to be replayed for subsequent ONVIF operations.

GeoVision GV-LPC2211 V1.13 allows an authenticated ONVIF user to inject shell commands through ConsumerReference.Address and execute arbitrary commands as root.

GeoVision GV-LPC2211 V1.13 allows administrator-controlled WEP key values containing shell syntax to execute arbitrary commands as root.

GeoVision GV-LPC2211 V1.13 allows an administrator-controlled WPA-PSK containing shell syntax to execute arbitrary commands as root when wireless configuration is applied.

GeoVision GV-LPC2211 V1.13 allows an administrator-controlled wireless SSID containing shell syntax to execute arbitrary commands as root.

GeoVision GV-LPC2211 V1.13 allows an administrator-controlled PPPoE username to escape a sourced shell configuration assignment and execute arbitrary commands as root.

GeoVision GV-LPC2211 V1.13 allows an administrator-controlled username containing shell metacharacters to be executed as arbitrary root commands when the stored username is later deleted.

GeoVision GV-LPC2211 V1.13 allows a Guest user to overwrite device configuration and replace the administrator password through SSVR.

GeoVision GV-LPC2211 V1.13 allows a Guest user to enter SSVR firmware-upgrade mode and disrupt live services before any firmware image is validated.

GeoVision GV-LPC2211 V1.13 allows a Guest user to retrieve persistent device configuration containing plaintext administrative and user credentials through SSVR.

GeoVision GV-LPC2211 V1.13 contains an authenticated stack buffer overflow in SSVR fragment reassembly that allows a valid user to crash the SSVR service.

Improper neutralization of special elements used in an SQL command ('SQL injection') vulnerability in Armiya Information Technologies Ltd. Co. Access Control System allows SQL Injection. This issue affects Access Control System: before Versiyon 2.

Authorization bypass through User-Controlled key vulnerability in Apache Camel K. An authorization vulnerability in custom resource resolution allows a tenant to reference secrets by name in the operator namespace, potentially exposing secrets belonging to other tenants or operator components. This issue affects Apache Camel K: from 2.0.0 before 2.9.3, from 2.10.1 before 2.10.2. Users are recommended to upgrade to version 2.9.3, 2.10.2 or 2.11.0, which fixes the issue.

Improper neutralization of directives in dynamically evaluated code ('eval injection') vulnerability in Apache Camel K. An improper neutralization of directives in dynamically evaluated Maven configuration allows tenant-controlled repository content to influence code execution within the operator pod, potentially enabling tenants to execute arbitrary code with the privileges of the operator. This issue affects Apache Camel K: from 2.0.0 before 2.9.3, from 2.10.1 before 2.10.2. Users are recommended to upgrade to version 2.9.3, 2.10.2 or 2.11.0, which fixes the issue.

Improper Control of Generation of Code ('Code Injection') vulnerability in Apache Camel K. A YAML injection vulnerability in custom resource configuration allows an authorized CR author to inject arbitrary Kubernetes objects, potentially enabling unauthorized resource creation with the privileges of the operator. This issue affects Apache Camel K: from 2.0.0 before 2.9.3, from 2.10.1 before 2.10.2. Users are recommended to upgrade to version 2.9.3, 2.10.2 or 2.11.0, which fixes the issue.

A flaw was found in the Device Authorization Grant flow of Keycloak, an identity and access management solution. The issue occurs because the token redemption process fails to check if a user account is currently locked due to brute-force protection. If an attacker has an active session for a locked account, they can complete the device login process and receive new security tokens. This allows the attacker to maintain access to the account even when it should be temporarily disabled to prevent unauthorized entry.

A flaw was found in the skupper-router component of Red Hat Service Interconnect, which is used to provide secure communication between distributed services. The issue occurs when the router processes a specially crafted network message using its AMQP field parser. Due to a lack of bounds on recursion during parsing, the router can run out of stack memory and crash, leading to a denial of service for the interconnected network.

An authorization bypass vulnerability exists in SHIRASAGI through a user-controlled key, which may allow an unauthorized attacker to retrieve files from the groupware's shared file feature.

A cross-site scripting vulnerability exists in SHIRASAGI, which may allow an attacker to execute an arbitrary script in the web browser of a user who accesses a website using the affected product.

An OS command injection vulnerability in Palo Alto Networks Checkov by Prisma® Cloud enables a local user to execute arbitrary commands in the processes running Checkov.

A code execution vulnerability in Palo Alto Networks Checkov by Prisma® Cloud can allow arbitrary code execution when Checkov scans a directory that contains an attacker-controlled configuration file.

A privilege escalation vulnerability in Palo Alto Networks Cortex XDR Broker VM enables an authenticated low privileged user with man-in-the-middle (MitM) access to execute code with root privileges on the Broker VM.

The Site Reviews WordPress plugin before 8.3.0 does not prevent request data from being deserialized, and derives the key protecting that data by padding out the site's WordPress nonce key, which makes the key publicly computable on installs where that key is absent, left at its sample value, or too short to be secret. This allows unauthenticated users to inject arbitrary PHP objects on such installs. The Site Reviews WordPress plugin before 8.3.0's own code contains no chain onward from the injected object, so how far it reaches depends on the other code present on the site.

The Registration Form for WooCommerce WordPress plugin before 1.1.3 does not validate that the form referenced during registration is a legitimate registration form, reading the permitted-role allow-list from an arbitrary attacker-controlled post instead. A user able to create a post (Contributor and above) can therefore register a new account with an arbitrary role, including Administrator, leading to full site takeover. This is an incomplete fix of CVE-2026-54807.

The zipMoney(Zip Co) Payments Plugin for WooCommerce WordPress plugin before 2.4.0 does not perform any authorisation checks on one of its front-end request handlers, and does not restrict which option name a caller may supply, allowing unauthenticated users to delete arbitrary WordPress options. This can be used to destroy site and access control configuration, deactivate every installed zipMoney(Zip Co) Payments Plugin for WooCommerce WordPress plugin before 2.4.0, and take the site offline.

The miniOrange 2FA WordPress plugin before 6.3.1, miniOrange 2FA WordPress plugin before 19.3 does not scope its second-factor attempt limit to the account being attacked, keying it instead to an identifier the client supplies and can change at will, allowing an attacker who already knows a victim's password to make unlimited one-time-passcode guesses and defeat the second factor. A second validation endpoint applies no attempt limit at all.

The miniOrange 2FA WordPress plugin before 6.3.1, miniOrange 2FA WordPress plugin before 19.3 does not require a validated transaction before deleting site options whose names come from unauthenticated request input, allowing any visitor to delete arbitrary options, which can lock every administrator out of the dashboard or deactivate every miniOrange 2FA WordPress plugin before 6.3.1, miniOrange 2FA WordPress plugin before 19.3 on the site.

The Notiqoo WordPress plugin before 1.4.14 does not have capability checks on several of its AJAX actions and builds the name of the option to write from user input, allowing users with a role as low as contributor to modify arbitrary WordPress options, which can be used to deactivate Notiqoo WordPress plugin before 1.4.14 and to lock every administrator out of the site.

The Ultimate Gift Cards for WooCommerce WordPress plugin before 3.2.10 does not have any authorisation check when displaying gift card details, allowing unauthenticated users to retrieve the gift cards attached to arbitrary orders and disclose customer personal data, balances, dates and, in 3.2.9, the live redemption code, which anyone holding it can spend. Versions from 3.0.3 to 3.2.8 disclose the same data without the redemption code.

The Ultimate Gift Cards for WooCommerce WordPress plugin before 3.2.10 does not reconcile the value of the gift card coupon it issues against the amount actually collected at checkout, allowing unauthenticated users to obtain store credit worth more than they paid.

An information disclosure vulnerability in the Palo Alto Networks Prisma® Access Agent on Linux enables a local user to access sensitive configuration data and credentials. The Prisma Access Agent on macOS, Windows, iOS, Android and Chrome OS is not affected.

A vulnerability in the EndPoint Data Loss Prevention (DLP) enforcement of Palo Alto Networks Prisma® Access Agent enables a local user to bypass configured DLP policy enforcement controls and exfiltrate sensitive data. This Prisma Access Agent on macOS, Linux, iOS, Android and Chrome OS is not affected.

Multiple local privilege escalation vulnerabilities in the Palo Alto Networks GlobalProtect™ app allows a local user to escalate their privileges to NT AUTHORITY\SYSTEM on Windows and root on macOS and Linux. This enables a non-administrative user to execute arbitrary commands with administrative privileges. This GlobalProtect app on iOS, Android and ChromeOS is not impacted.