CVE Feed

In the Linux kernel, the following vulnerability has been resolved: gpib: fix double decrement of descriptor_busy in command_ioctl() commit d1857f8296dc ("gpib: fix use-after-free in IO ioctl handlers") introduced a descriptor_busy reference counter to pin struct gpib_descriptor across IO ioctl operations. In command_ioctl(), the error path inside the loop decrements descriptor_busy and breaks, but execution then falls through to the unconditional decrement after the loop, underflowing the counter to -1. This re-enables the use-after-free that the original fix was meant to prevent: a concurrent close_dev_ioctl() sees descriptor_busy == 0 on an actively-used descriptor and frees it. Remove the early decrement from the error path. The post-loop decrement already handles all exit paths, matching the correct pattern used in read_ioctl() and write_ioctl().

In the Linux kernel, the following vulnerability has been resolved: net: serialize netif_running() check in enqueue_to_backlog() Syzbot reported a KASAN slab-use-after-free in fib_rules_lookup(). The root cause is a race condition where packets can escape the backlog flushing during device unregistration (e.g., during netns exit). Commit e9e4dd3267d0 ("net: do not process device backlog during unregistration") introduced a lockless netif_running() check in enqueue_to_backlog() to prevent queuing packets to an unregistering device. However, this creates a TOCTOU race window. A lockless transmitter (like veth_xmit) can pass the check before dev_close() clears IFF_UP. If the transmitter is then delayed, flush_all_backlogs() can run and finish before the transmitter grabs the backlog lock and queues the packet. The packet then escapes the flush and triggers UAF later when processed. Fix this by moving the netif_running() check inside the backlog lock. This serializes the check with the flush work (which also grabs the lock). We then either queue the packet before the flush runs (so it gets flushed), or check netif_running() after the flush/close completes (so it gets dropped).

In the Linux kernel, the following vulnerability has been resolved: tcp: ipv6: clamp default adverting MSS to avoid GSO_BY_FRAGS (0xFFFF) When MTU is large, ip6_default_advmss() can return IPV6_MAXPLEN (65535). This is interpreted by TCP as mss_clamp, allowing the MSS to reach 65535. However, 0xFFFF is also used as a magic value GSO_BY_FRAGS in the kernel. If a TCP packet with gso_size=0xFFFF is passed to skb_segment(), it will be mistakenly treated as GSO_BY_FRAGS, leading to a NULL pointer dereference because local TCP packets do not use frag_list. Fix this by returning min(IPV6_MAXPLEN, GSO_BY_FRAGS - 1) (65534) from ip6_default_advmss() when MTU is large. Also update the stale comment in ip6_default_advmss() which suggested that IPV6_MAXPLEN is returned to mean "any MSS".

In the Linux kernel, the following vulnerability has been resolved: kcm: use WRITE_ONCE() when changing lower socket callbacks kcm_attach() replaces a live lower TCP socket's sk_data_ready and sk_write_space callbacks with KCM handlers, and kcm_unattach() restores them later. Those callback-pointer updates are still plain stores even though the same fields can be read and invoked concurrently on other CPUs. If another CPU observes an older callback snapshot after the live field has already been restored, callback execution can run with a mismatched target and sk_user_data state, leading to stale or misdirected wakeups. Use WRITE_ONCE() for the callback replacement and restore operations so these shared callback fields follow the same visibility contract already established by the earlier 4022 fixes.

In the Linux kernel, the following vulnerability has been resolved: ipv4: fib: Don't dump dying fib_info in fib_leaf_notify(). syzbot reported use-after-free in nsim_fib4_prepare_event(). [0] The problem is that the following functions call fib_info_hold() / refcount_inc() while dumping fib_info under RCU, which is unsafe. * mlxsw_sp_router_fib4_event() * rocker_router_fib_event() * nsim_fib4_prepare_event() refcount_inc_not_zero() must be used, but it would be too late there. Let's guarantee the lifetime of fib_info in fib_leaf_notify(). Note that IPv6 does not need the corresponding change since fib6_table_dump() holds fib6_table.tb6_lock. [0]: refcount_t: addition on 0; use-after-free. WARNING: lib/refcount.c:25 at refcount_warn_saturate+0x9f/0x110 lib/refcount.c:25, CPU#0: kworker/u8:15/3420 Modules linked in: CPU: 0 UID: 0 PID: 3420 Comm: kworker/u8:15 Not tainted syzkaller #0 PREEMPT_{RT,(full)} Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/18/2026 Workqueue: netns cleanup_net RIP: 0010:refcount_warn_saturate+0x9f/0x110 lib/refcount.c:25 Code: eb 66 85 db 74 3e 83 fb 01 75 4c e8 1b f1 22 fd 48 8d 3d 84 cb f1 0a 67 48 0f b9 3a eb 4a e8 08 f1 22 fd 48 8d 3d 81 cb f1 0a <67> 48 0f b9 3a eb 37 e8 f5 f0 22 fd 48 8d 3d 7e cb f1 0a 67 48 0f RSP: 0018:ffffc9000f2c7270 EFLAGS: 00010293 RAX: ffffffff84a18858 RBX: 0000000000000002 RCX: ffff888032ff9ec0 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffff8f9353e0 RBP: 0000000000000000 R08: ffff888032ff9ec0 R09: 0000000000000005 R10: 0000000000000100 R11: 0000000000000004 R12: ffff8880570cc000 R13: dffffc0000000000 R14: ffff88802b40563c R15: ffff8880570cc000 FS: 0000000000000000(0000) GS:ffff888126173000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fb1f4d5d000 CR3: 000000006072a000 CR4: 00000000003526f0 Call Trace: <TASK> __refcount_add include/linux/refcount.h:-1 [inline] __refcount_inc include/linux/refcount.h:366 [inline] refcount_inc include/linux/refcount.h:383 [inline] fib_info_hold include/net/ip_fib.h:629 [inline] nsim_fib4_prepare_event drivers/net/netdevsim/fib.c:930 [inline] nsim_fib_event_schedule_work drivers/net/netdevsim/fib.c:1000 [inline] nsim_fib_event_nb+0x1055/0x1240 drivers/net/netdevsim/fib.c:1043 call_fib_notifier+0x45/0x80 net/core/fib_notifier.c:25 call_fib_entry_notifier net/ipv4/fib_trie.c:90 [inline] fib_leaf_notify net/ipv4/fib_trie.c:2176 [inline] fib_table_notify net/ipv4/fib_trie.c:2194 [inline] fib_notify+0x36b/0x5e0 net/ipv4/fib_trie.c:2217 fib_net_dump net/core/fib_notifier.c:70 [inline] register_fib_notifier+0x184/0x360 net/core/fib_notifier.c:108 nsim_fib_create+0x85d/0x9f0 drivers/net/netdevsim/fib.c:1596 nsim_dev_reload_create drivers/net/netdevsim/dev.c:1604 [inline] nsim_dev_reload_up+0x374/0x7c0 drivers/net/netdevsim/dev.c:1058 devlink_reload+0x501/0x8d0 net/devlink/dev.c:475 devlink_pernet_pre_exit+0x1ff/0x420 net/devlink/core.c:558 ops_pre_exit_list net/core/net_namespace.c:161 [inline] ops_undo_list+0x187/0x940 net/core/net_namespace.c:234 cleanup_net+0x56e/0x800 net/core/net_namespace.c:702 process_one_work kernel/workqueue.c:3314 [inline] process_scheduled_works+0xb5d/0x1860 kernel/workqueue.c:3397 worker_thread+0xa53/0xfc0 kernel/workqueue.c:3478 kthread+0x388/0x470 kernel/kthread.c:436 ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK>

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci: validate codec capability element length Read Local Codec Capabilities returns a sequence of capability elements. Each element starts with a one-byte length followed by that many payload bytes. hci_read_codec_capabilities() checks that the skb contains the length byte, but then validates only caps->len against the remaining skb length. A malformed controller response with one remaining byte and caps->len set to one passes that check even though the element needs two bytes. The parser then records a two-byte capability and copies one byte beyond the advertised response payload into the codec list. Validate the full element size, including the length byte, before adding it to the accumulated capability length. This preserves all well-formed capability elements and drops only truncated controller responses.

In the Linux kernel, the following vulnerability has been resolved: ASoC: amd: acp-sdw-sof: Bound DAI link iteration create_sdw_dailinks() walks sof_dais until it finds an entry with initialised cleared, but sof_dais is allocated with exactly num_ends entries. If all entries are initialised, the loop reads past the end of the array. Pass the allocated entry count to create_sdw_dailinks() and stop before reading past the array.

In the Linux kernel, the following vulnerability has been resolved: lockd: Avoid hashing uninitialized bytes in nlm4svc_lookup_file() file_hash() digests the first LOCKD_FH_HASH_SIZE bytes of nfs_fh.data when bucketing nlm_files[], independent of fh.size. Commit 3de744ee4e45 ("lockd: Use xdrgen XDR functions for the NLMv4 TEST procedure") set .pc_argzero to zero for the converted procedures and moved file-handle population into nlm4svc_lookup_file(), which copies only xdr_lock->fh.len bytes into lock->fh.data. When an NLMv4 client presents a file handle shorter than LOCKD_FH_HASH_SIZE, bytes fh.len..31 retain whatever the argument buffer held from an earlier request. The same wire handle then hashes to different buckets across calls; nlm_lookup_file() misses the existing nlm_file entry, and lock-state lookups fail. Zero only the tail bytes that file_hash() would otherwise consume. Handles of LOCKD_FH_HASH_SIZE or larger already populate every byte that file_hash() reads.

In the Linux kernel, the following vulnerability has been resolved: IB/mlx5: Fix transport-domain rollback and initialize lb mutex earlier mlx5_ib_alloc_transport_domain() allocates a transport domain and then may fail in mlx5_ib_enable_lb(). In that case, the allocated TD is leaked. Fix this by deallocating the TD when mlx5_ib_enable_lb() returns an error. Also return 0 explicitly in the no-loopback-capability success branch, and move dev->lb.mutex initialization to mlx5_ib_stage_init_init().

In the Linux kernel, the following vulnerability has been resolved: bpf: fix UAF by restoring RCU-delayed inode freeing in bpffs commit 4f375ade6aa9 ("bpf: Avoid RCU context warning when unpinning htab with internal structs") moved inode cleanup from ->free_inode() into ->destroy_inode() to avoid sleeping in RCU context when calling bpf_any_put(). However this removed the RCU delay on freeing the inode itself and the cached symlink body (i_link), both of which can be accessed by RCU pathwalk (pick_link, may_lookup etc.). This causes a use-after-free when a concurrent unlinkat() drops the last inode reference and destroy_inode() frees the inode immediately, while another task is still walking the path in RCU mode and reads inode->i_opflags (offset +2) inside current_time() -> is_mgtime(). KASAN reports: BUG: KASAN: slab-use-after-free in is_mgtime include/linux/fs.h:2313 Read of size 2 at addr ffff8880407e4282 (offset +2 = i_opflags) The rules (per Al Viro): ->destroy_inode() called immediately, can sleep, use for blocking cleanup e.g. bpf_any_put() ->free_inode() called after RCU grace period, use for freeing inode and anything RCU-accessible e.g. i_link Fix: split the two concerns properly: - keep bpf_any_put() in bpf_destroy_inode() since it is blocking and needs to run promptly - introduce bpf_free_inode() to handle kfree(i_link) and free_inode_nonrcu() with proper RCU delay, preventing the UAF

In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix divide-by-zero in calculate_mcache_setting on zero viewport If a plane reaches calculate_mcache_setting with a zero-area viewport, calculate_mcache_setting exits early with num_mcaches == 0 and mvmpg_width/height == 0. This will cause a divide-by-zero panic and can also cause an underflow on num_mcaches. Fix this by changing calculate_mcache_setting to bool and adding guards after each calculate_mcache_row_bytes call. If num_mcaches or mvmpg_width/height is zero, return a false. Callers will propagate the failure as a rejected mode, which prevents the panic. (cherry picked from commit 29c0f7c655f47bcbd575ff75e58480df6ec3c9da)

In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Supply the overflow slot size in BPOS, not the whole bin BO size vc4_overflow_mem_work() points BPOA at a 512KB slot inside the 16MB binner BO, but writes the size of the whole BO to BPOS. On every binner out-of-memory event the PTB is therefore authorized to write tile lists across all the other slots (which may hold the tile state, tile alloc and overflow memory of in-flight jobs) and, for any slot but the first, past the end of the binner BO into unrelated CMA memory. Since CMA pages are recycled into page cache and user allocations, this is arbitrary memory corruption by GPU DMA. In practice it shows up as GPU hangs with corrupted control list pointers, userspace heap corruption, a GPU that stays permanently wedged after the first hang, and occasional full system crashes, whenever a job overflows the initial binner slot. The bug dates back to the conversion from a dedicated overflow BO (where writing the full BO size was correct) to the slotted binner BO.

In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix tid_tx use-after-free on BA session stop ieee80211_stop_tx_ba_cb() hands tid_tx to kfree_rcu() through ieee80211_remove_tid_tx(), and then reads tid_tx->ndp after dropping sta->lock: ieee80211_remove_tid_tx(sta, tid); /* kfree_rcu(tid_tx, rcu_head) */ ... spin_unlock_bh(&sta->lock); if (start_txq) ieee80211_agg_start_txq(sta, tid, false); if (send_delba) ieee80211_send_delba(..., tid_tx->ndp); That read is not covered by an RCU read-side critical section, and it runs in preemptible process context: both callers hold the wiphy mutex, reaching it either from the ieee80211_ba_session_work() wiphy work or from ieee80211_sta_tear_down_BA_sessions() during station teardown. Softirqs can run in that window too, both from the local_bh_enable() that ends ieee80211_agg_start_txq() and from any interrupt exit, so the RCU callback can free tid_tx before the read. Driving the function from a test module with the grace period forced into that window, KASAN reports the read, and the free arrives on the ordinary RCU softirq path: BUG: KASAN: slab-use-after-free in ieee80211_stop_tx_ba_cb+0x3cd/0x400 Read of size 1 at addr ffff888002b9f52e by task kworker/0:1/10 [...] Freed by task 57: __kasan_slab_free+0x47/0x70 __rcu_free_sheaf_prepare+0x70/0x250 rcu_free_sheaf_nobarn+0x18/0x40 rcu_core+0x426/0x1310 handle_softirqs+0x144/0x590 __irq_exit_rcu+0xea/0x150 irq_exit_rcu+0x9/0x20 sysvec_apic_timer_interrupt+0x6b/0x80 asm_sysvec_apic_timer_interrupt+0x1a/0x20 send_delba is only set when tx_stop is set, which happens for AGG_STOP_LOCAL_REQUEST alone, so this is reached on local teardown - session idle timeout, PTK rekey, suspend, HW reconfig - and not from a peer's DELBA. Read ndp into a local before the session is freed, while sta->lock is still held. tid_tx->ndp has a single writer, in ieee80211_tx_ba_session_handle_start(), which cannot run concurrently here: both paths are serialised by the wiphy mutex, and the session is already marked HT_AGG_STATE_STOPPING at this point. tid_tx->ndp is also the only tid_tx dereference left after ieee80211_remove_tid_tx() in this function. [move/change the comment a bit to be more general not just on ndp, initialize ndp directly]

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: hold conn in hci_connect_pa_sync() callback There is theoretical UAF if the conn is freed while the hci_sync task is running. Hold refcount to avoid that.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in __close_file_table_ids() A ksmbd_file can remain alive after logical close while another session holds a temporary reference obtained through ksmbd_lookup_fd_inode(). ksmbd_close_fd() currently marks the file closed and drops the idr-owned reference, but leaves the pointer published in the closing session's idr until the final reference is dropped. If the foreign holder performs the final ksmbd_fd_put(), __put_fd_final() supplies the foreign session's file table to __ksmbd_close_fd(). The object is then freed without being removed from its owner's idr, and the owner session later dereferences the stale pointer during file-table teardown. Remove the volatile id from the owner's idr while ksmbd_close_fd() still holds that table's lock, and clear volatile_id before dropping the idr-owned reference. A later foreign final put then only performs physical destruction and cannot remove the object from the wrong table.

In the Linux kernel, the following vulnerability has been resolved: mm/slab: prevent unbounded recursion in free path with new kmalloc type Commit 280ea9c3154b ("mm/slab: avoid allocating slabobj_ext array from its own slab") avoided recursive allocation of obj_exts from kmalloc caches of the same size, by bumping the obj_exts array's allocation size whenever the array size equals the size of the object being allocated. However, as reported by Danielle Costantino and Shakeel Butt, even slabs from kmalloc caches of different sizes can form a cycle by allocating obj_exts arrays from each other [1]: What happened: a KMALLOC_NORMAL slab's obj_exts array (used by allocation profiling / memcg accounting) is itself kmalloc()'d from a KMALLOC_NORMAL cache, so the "slab holds another slab's obj_exts array" relation can form cycles. With sizeof(struct slabobj_ext) == 16 and the host's geometry: - kmalloc-512 has 64 objects/slab -> array is 64*16 == 1024 bytes, served from kmalloc-1k; - kmalloc-1k has 32 objects/slab -> array is 32*16 == 512 bytes, served from kmalloc-512. A kmalloc-512 slab and a kmalloc-1k slab therefore hold each other's obj_exts array. Discarding one frees the other's array, which empties and discards that slab, which frees the first's array, and so on: __free_slab() -> free_slab_obj_exts() -> kfree() -> discard_slab() -> __free_slab() recurses along the cycle until the stack is exhausted. With memory allocation profiling, this allows unbounded recursion in the free path and led to a stack overflow on a production host in the Meta fleet [1]: BUG: TASK stack guard page was hit Oops: stack guard page RIP: 0010:kfree+0x8/0x5d0 Call Trace: __free_slab+0x66/0xc0 kfree+0x3f0/0x5d0 ... ( ~125x __free_slab <-> kfree ) ... <kernel driver freeing a resource> do_syscall_64 It is proposed [1] to resolve this issue by always serving the obj_exts array allocation from kmalloc caches (or large kmalloc) of sizes larger than the object size. However, as pointed out by Vlastimil Babka [2], this can waste an excessive amount of memory as slabs from large kmalloc sizes (e.g. kmalloc-8k) generally need obj_exts arrays much smaller than the object size. Therefore, rather than bumping the size, let us take a different approach; disallow formation of cycles between kmalloc types when allocating obj_exts arrays. Currently, all obj_exts arrays are served from normal kmalloc caches. Cycles cannot be created if obj_exts arrays of normal kmalloc caches are served from a special kmalloc type that can never have obj_exts arrays. To achieve this, create a new kmalloc type called KMALLOC_NO_OBJ_EXT. KMALLOC_NO_OBJ_EXT caches are created with SLAB_NO_OBJ_EXT flag when either 1) memory allocation profiling is not permanently disabled, or 2) kmalloc types with a priority higher than KMALLOC_CGROUP are aliased with KMALLOC_NORMAL. Sheaf bootstrapping for KMALLOC_NO_OBJ_EXT caches now must be deferred because allocation of a barn can trigger obj_exts array allocation of normal kmalloc caches when the KMALLOC_NO_OBJ_EXT cache for that size is not ready yet. For simplicity, perform bootstrapping of sheaves for all kmalloc caches later. Introduce a new slab alloc flag, SLAB_ALLOC_NO_OBJ_EXT, to prevent allocation of obj_exts arrays, and let kmalloc_slab() override the type to KMALLOC_NO_OBJ_EXT when specified. Note that kmalloc_type() remains unchanged because kmalloc_flags() bypasses the kmalloc fastpath. Do not pass SLAB_ALLOC_NO_RECURSE to kmalloc_flags() in alloc_slab_obj_exts() and instead use SLAB_ALLOC_NO_OBJ_EXT only when the objects are allocated from normal kmalloc caches. While this prevents unbounded recursive allocation of obj_exts, it allows KMALLOC_NO_OBJ_EXT caches to have sheaves. Since sheaf allocations specify SLAB_ALLOC_NO_RECURSE that prevents allocation of both sheaves and obj_exts arrays, the recursion depth is bounded. obj_exts arrays for non- ---truncated---

In the Linux kernel, the following vulnerability has been resolved: 9p: skip nlink update in cacheless mode to fix WARN_ON v9fs_dec_count() unconditionally calls drop_nlink() on regular files, even when the inode's nlink is already zero. In cacheless mode the client refetches inode metadata from the server (the source of truth) on every operation, so by the time v9fs_remove() returns, the locally cached nlink may already reflect the post-unlink value: 1. Client initiates unlink, server processes it and sets nlink to 0 2. Client refetches inode metadata (nlink=0) before unlink returns 3. Client's v9fs_remove() completes successfully 4. Client calls v9fs_dec_count() which calls drop_nlink() on nlink=0 This race is easily triggered under heavy unlink workloads, such as stress-ng's unlink stressor, producing the following warning: WARNING: fs/inode.c:417 at drop_nlink+0x4c/0xc8 Call trace: drop_nlink+0x4c/0xc8 v9fs_remove+0x1e0/0x250 [9p] v9fs_vfs_unlink+0x20/0x38 [9p] vfs_unlink+0x13c/0x258 ... In cacheless mode the server is authoritative and the inode is on its way out, so locally adjusting nlink buys nothing. Skip v9fs_dec_count() entirely when neither CACHE_META nor CACHE_LOOSE is set, which both avoids the warning and removes a class of nlink races (two concurrent unlinkers observing nlink > 0 and both calling drop_nlink()) that an nlink == 0 guard alone would only narrow rather than close.

In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: Validate NIX maximum LFs correctly NIX maximum number of LFs can be set via devlink command but that can be done before assigning any LFs to a PF/VF. The condition used to check whether any LFs are assigned is incorrect. This patch fixes that condition.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_queue: pin bridge device while NFQUEUE holds fake dst The br_netfilter fake rtable is embedded in struct net_bridge and is attached to bridged packets with skb_dst_set_noref(). If such a packet is queued to NFQUEUE, __nf_queue() upgrades that fake dst with skb_dst_force(). At that point the queued skb can hold a real dst reference after bridge teardown has started. The problem is not that every bridged packet needs its own dst reference. The problem is that NFQUEUE can keep the bridge private fake dst alive after unregister begins. Fix this by keeping the bridge fake dst model unchanged and pinning the bridge master device only while the packet sits in NFQUEUE. Record the bridge device in nf_queue_entry when the queued skb carries a bridge fake dst, take a device reference for the queue lifetime, and drop it when the queue entry is freed. Also make sure queued entries are reaped when that bridge device goes down, and drop the redundant nf_bridge_info_exists() test from the fake dst detection. This keeps netdev_priv(br->dev) alive until verdict completion, so the embedded fake rtable and its metrics backing storage cannot be freed out from under dst_release(). It also avoids the constant refcount bump and avoids using ipv4-specific dst helpers for IPv6 bridge traffic.

In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Ignore pending PV EOI if the vCPU has since disabled PV EOIs Ignore KVM's internal "service pending PV EOI" request if the vCPU has disabled PV EOIs since the request was made. Asserting that PV EOIs are enabled can fail if reading guest memory in pv_eoi_get_user() fails, i.e. if pv_eoi_test_and_clr_pending() bails early, *and* the vCPU also disables PV EOIs. kernel BUG at arch/x86/kvm/lapic.c:3338! Oops: invalid opcode: 0000 [#1] SMP CPU: 4 UID: 1000 PID: 890 Comm: pv_eoi_test Not tainted 7.0.0-d585aa5894d8-vm #337 PREEMPT Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:kvm_lapic_sync_from_vapic+0x12b/0x140 [kvm] Call Trace: <TASK> kvm_arch_vcpu_ioctl_run+0x1075/0x1c30 [kvm] kvm_vcpu_ioctl+0x2d5/0x980 [kvm] __x64_sys_ioctl+0x8a/0xd0 do_syscall_64+0xb5/0xb40 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> Modules linked in: kvm_intel kvm irqbypass ---[ end trace 0000000000000000 ]---

In the Linux kernel, the following vulnerability has been resolved: net/sched: act_pedit: fix TOCTOU heap OOB write in tc offload There is a TOCTOU race condition in flower lockless approach between sizing a flow_rule buffer and filling it. [email protected] reports: The cls_flower classifier operates with TCF_PROTO_OPS_DOIT_UNLOCKED (fl_change runs without RTNL), while RTM_NEWACTION holds RTNL, so the independent locking domains make the race reachable in practice. KASAN confirms: BUG: KASAN: slab-out-of-bounds in tcf_pedit_offload_act_setup+0x81b/0x930 Write of size 4 at addr ffff888001f27520 by task poc-toctou/312 The buggy address is located 0 bytes to the right of allocated 288-byte region [ffff888001f27400, ffff888001f27520) (cache kmalloc-512) Note: The result is a heap OOB write attacker-controlled content into the adjacent slab object (requires CAP_NET_ADMIN). The fix introduces reading tcfp_nkeys under act->tcfa_lock in all places using a new tcf_pedit_nkeys_locked() which replaces the old tcf_pedit_nkeys(). Additionally we close the remaining TOCTOU window between the sizing read and the fill reads by more careful accounting. Rather than silently truncating the key count, which leads to incorrect action semantics offloaded to hardware and secondary OOB writes if the remaining capacity is zero or consumed by prior actions, we enforce remaining capacity checks and return -ENOSPC if the required space exceeds the remaining capacity.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix HV VHCA stats agent registration race mlx5e_hv_vhca_stats_create() registers the stats agent through mlx5_hv_vhca_agent_create(). The helper publishes the agent in hv_vhca->agents[type] under agents_lock and immediately schedules an asynchronous control invalidation on the HV VHCA workqueue before returning to mlx5e. The asynchronous invalidation invokes the control agent's invalidate callback, which reads the hypervisor control block and forwards the command to mlx5e_hv_vhca_stats_control(). That callback may either: - call cancel_delayed_work_sync(&priv->stats_agent.work), or - call queue_delayed_work(priv->wq, &sagent->work, sagent->delay). However, the delayed_work and priv->stats_agent.agent are only initialized after mlx5_hv_vhca_agent_create() returns to mlx5e: agent = mlx5_hv_vhca_agent_create(...); /* publish + invalidate */ ... priv->stats_agent.agent = agent; /* too late */ INIT_DELAYED_WORK(&priv->stats_agent.work, ...); /* too late */ If the asynchronous control path runs before the two assignments above, it can: - Operate on an uninitialized delayed_work whose timer.function is NULL. queue_delayed_work() calls add_timer() unconditionally, so when the timer expires the timer softirq invokes a NULL function pointer. - Re-initialize the timer later through INIT_DELAYED_WORK() while the timer is already enqueued in the timer wheel, corrupting the hlist (entry.pprev cleared while the previous bucket node still points at this entry). - When the worker eventually runs, mlx5e_hv_vhca_stats_work() reads sagent->agent (NULL) and dereferences it inside mlx5_hv_vhca_agent_write(). Fix this by: - Initializing priv->stats_agent.work before invoking mlx5_hv_vhca_agent_create(), so the work is always in a valid state when the control callback observes it. - Adding a struct mlx5_hv_vhca_agent **ctx_update out-parameter to mlx5_hv_vhca_agent_create(). The helper writes the agent pointer to *ctx_update before publishing into hv_vhca->agents[] and triggering the agents_update flow, so any callback subsequently invoked from that flow already sees a valid priv->stats_agent.agent. This avoids having the control callback participate in agent initialization. While at it, access priv->stats_agent.agent with READ_ONCE()/WRITE_ONCE() for the cross-CPU access with the worker, and clear priv->stats_agent.buf on the agent_create() failure path.

In the Linux kernel, the following vulnerability has been resolved: netfilter: ip6tables: mark malformed IPv6 extension headers for hotdrop The ah, hbh and rt matches check that the fixed extension header is present, then use the header length field to derive the advertised extension header length for matching. For the ah match, add the missing advertised-length check. For hbh and rt, update the existing advertised-length checks. In all three cases, set hotdrop to true before returning false when the advertised extension header length exceeds the available skb data. Returning false treats the packet as a rule mismatch. Set hotdrop to true and drop malformed packets so they cannot bypass rules intended to drop packets with these IPv6 extension headers.

In the Linux kernel, the following vulnerability has been resolved: afs: Fix the volume AFS_VOLUME_RM_TREE is set on Fix afs_insert_volume_into_cell() to set AFS_VOLUME_RM_TREE on the volume replaced, not the new volume, as it's now removed from the cell's volume tree. This will cause the old volume to be removed from the tree twice and the new volume never to be removed.

In the Linux kernel, the following vulnerability has been resolved: afs: Fix missing NULL pointer check in afs_break_some_callbacks() Fix afs_break_some_callbacks() to check to see if afs_lookup_volume_rcu() returned NULL (e.g. the specified volume is unknown).

In the Linux kernel, the following vulnerability has been resolved: afs: Fix callback service message parsers to pass through -EAGAIN The AFS filesystem client uses an rxrpc server to listen for callback notifications. Each callback call type handler has a delivery function that parses the incoming request stream, and this should return -EAGAIN the last packet hasn't yet been seen, but all currently queued received data is consumed. afs_extract_data() does this, but the -EAGAIN return is switched to 0 inadvertantly Fix callback service message parsers to pass through -EAGAIN

In the Linux kernel, the following vulnerability has been resolved: net: sungem: fix probe error cleanup gem_init_one() calls gem_remove_one() when register_netdev() fails. gem_remove_one() unregisters and frees resources owned by the net_device, including the DMA block, MMIO mapping, PCI regions, and the net_device itself. gem_init_one() then falls through to its own cleanup labels and frees the same resources again. Keep the register_netdev() error path in gem_init_one(): clear drvdata so PM/remove paths do not see a half-registered device, remove the NAPI instance added during probe, and let the existing cleanup labels release the resources once. The issue was found by a local static-analysis checker for probe error paths. The reported path was manually inspected before sending this fix. Compile-tested with CONFIG_SUNGEM=y. Runtime testing was not performed because no sungem hardware is available.

In the Linux kernel, the following vulnerability has been resolved: xfrm: validate selector family and prefixlen during match syzbot reported a shift-out-of-bounds in xfrm_selector_match() due to AF_UNSPEC selector with large prefixlen (e.g. 128) matched against IPv4 flow (when XFRM_STATE_AF_UNSPEC is set). Fix this by: - Rejecting mismatched families in xfrm_selector_match. - Returning false in addr4_match if prefixlen > 32. - Returning false in addr_match if prefixlen > 128 (prevents overflow).

In the Linux kernel, the following vulnerability has been resolved: net/9p: fix race condition on rdma->state in trans_rdma.c The rdma->state field is modified without holding req_lock in both recv_done() and p9_cm_event_handler(), while rdma_request() accesses the same field under the req_lock spinlock. This inconsistent locking creates a race condition: - recv_done() running in softirq completion context sets rdma->state = P9_RDMA_FLUSHING without acquiring req_lock - p9_cm_event_handler() modifies rdma->state at multiple points (ADDR_RESOLVED, ROUTE_RESOLVED, ESTABLISHED, CLOSED) without req_lock - rdma_request() uses spin_lock_irqsave(&rdma->req_lock, flags) to protect the read-modify-write of rdma->state The race can cause lost state transitions: recv_done() or the CM event handler could set state to FLUSHING/CLOSED while rdma_request() is concurrently checking or modifying state under the lock, leading to the FLUSHING transition being silently overwritten by CLOSING. This corrupts the connection state machine and can cause use-after-free on RDMA request objects during teardown. Fix by adding req_lock protection to all rdma->state modifications in recv_done() and p9_cm_event_handler(), matching the pattern already used in rdma_request(). Use spin_lock_irqsave/spin_unlock_irqrestore in the CM event handler since it can race with recv_done() which runs in softirq context. Tested with a kernel module that races two threads (simulating rdma_request and recv_done/CM handler) on rdma->state with proper locking: 5.5M+ FLUSHING writes over 27M iterations with 0 lost transitions.

In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Fix FRMR set pinned push error path Add destruction of FRMR handles in case the push to the pool fails. This prevents resources leak in case pool page allocation fails.

In the Linux kernel, the following vulnerability has been resolved: hwmon: adm1275: Prevent reading uninitialized stack While adding support for the ROHM BD127X0 hot-swap controllers, sashiko reported an error in device-name comparison, which can lead to reading uninitialized stack memory. Quoting Sashiko: This is a pre-existing issue, but I noticed that just before this block in adm1275_probe(), there might be an out-of-bounds stack read: ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, block_buffer); if (ret < 0) { ... } for (mid = adm1275_id; mid->name[0]; mid++) { if (!strncasecmp(mid->name, block_buffer, strlen(mid->name))) break; } Since i2c_smbus_read_block_data() reads up to 32 bytes into the uninitialized stack array block_buffer without appending a null terminator, strncasecmp() could read past the valid bytes returned in ret. For example, if the device returns a shorter string like "adm12", checking it against "adm1275" up to the length of "adm1275" will continue reading into uninitialized stack bounds. Prevent reading uninitialized memory by zeroing the stack array.

In the Linux kernel, the following vulnerability has been resolved: net: phy: sfp: free mii_bus in sfp_i2c_mdiobus_destroy sfp_i2c_mdiobus_create() allocates the I2C MDIO bus with mdio_i2c_alloc(), a plain (non-devm) allocation, and registers it. sfp_i2c_mdiobus_destroy() only unregisters the bus and clears sfp->i2c_mii without calling mdiobus_free(). As the only reference to the bus is then cleared, the struct mii_bus is leaked. This is hit whenever a copper/RollBall SFP module that instantiated an MDIO bus is removed: sfp_sm_main() takes the global teardown path and calls sfp_i2c_mdiobus_destroy(). sfp_cleanup(), on driver unbind, frees sfp->i2c_mii directly, which is why the leak only triggered on module hot-removal and not on unbind. Free the bus in sfp_i2c_mdiobus_destroy() to match the allocation done in sfp_i2c_mdiobus_create().

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix stack slot index in nospec checks check_stack_write_fixed_off() computes the byte slot for a fixed-offset stack write as -off - 1, and records each written byte in slot_type[] with (slot - i) % BPF_REG_SIZE. The Spectre v4 sanitization pre-check uses slot_type[i] instead. For a 4-byte write at fp-8 after the lower half of fp-8 has been zeroed, the pre-check scans bytes 0..3 and sees STACK_ZERO while the actual write updates bytes 7..4. That can leave the second half-slot write without nospec_result even though the bytes being overwritten still require sanitization. Use the same slot index in the sanitization pre-check that the write path uses when updating slot_type[].

In the Linux kernel, the following vulnerability has been resolved: md/raid1: free r1_bio when REQ_NOWAIT is set and read would block on retry When a read is retried, raid1_read_request() may be called with a pre-allocated r1_bio. If wait_read_barrier() fails for a REQ_NOWAIT read, the bio is completed and the function returns immediately. In this case the existing r1_bio is leaked. This fixes a leak of pre-allocated r1_bio structures for retried reads.

In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ct: fix nf_connlabels leak on two error paths tcf_ct_fill_params() calls nf_connlabels_get() (setting put_labels) when TCA_CT_LABELS is present, but two later error sites use a bare return instead of "goto err", skipping the err: nf_connlabels_put() cleanup. They also precede the "p->put_labels = put_labels" assignment, so the tcf_ct_params_free() fallback does not release the count either. Each failed RTM_NEWACTION on these paths leaks one nf_connlabels reference: net->ct.labels_used is incremented and never released. The action is reachable with CAP_NET_ADMIN over the netns, i.e. from an unprivileged user namespace on default-userns kernels. Impact: an unprivileged user with CAP_NET_ADMIN over a network namespace (e.g. via user namespaces) leaks one nf_connlabels reference per failed RTM_NEWACTION on the two error paths; net->ct.labels_used is never released. The err: label is safe to reach from both sites: p->tmpl is still NULL there (kzalloc'd, not yet assigned) and nf_ct_put(NULL) is a no-op, so no inline release is needed.

In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Kill MIDI 2.0 URBs before freeing endpoints MIDI 2.0 input URBs are started during snd_usb_midi_v2_create(). A later setup failure can still jump to snd_usb_midi_v2_free(), which currently frees each endpoint and its coherent URB buffers without first stopping the submitted URBs. A completion can then dereference the embedded URB context and endpoint state after they have been freed, or try to resubmit from the stale endpoint. This was observed as a KASAN slab-use-after-free in input_urb_complete(). The buggy scenario involves two paths, with each column showing the order within that path: probe error path: USB completion path: 1. start_input_streams() submits 1. The HCD still owns a input URBs. submitted input URB. 2. A later setup helper returns 2. input_urb_complete() runs an error. with urb->context in ep. 3. snd_usb_midi_v2_free() frees 3. The completion reads ep endpoint storage and URB buffers. state and can requeue URBs. Make the endpoint destructor follow the same teardown ordering used for disconnect when the endpoint has not already been disconnected: publish ep->disconnected, kill the URBs synchronously, and drain the endpoint before freeing URB buffers and endpoint storage. The guard avoids repeating the stop sequence after the normal snd_usb_midi_v2_disconnect_all() path, while still synchronizing the direct MIDI 2.0 create-error free path. Validation reproduced this kernel report: BUG: KASAN: slab-use-after-free in input_urb_complete+0x37/0x1b0 Workqueue: usb_hub_wq hub_event RIP: 0010:_raw_spin_unlock_irq+0x2e/0x50 Read of size 8 Call trace: dump_stack_lvl+0x77/0xb0 print_report+0xce/0x5f0 input_urb_complete+0x37/0x1b0 (sound/usb/midi2.c:186) srso_alias_return_thunk+0x5/0xfbef5 __virt_addr_valid+0x19f/0x330 kasan_report+0xe0/0x110 __usb_hcd_giveback_urb+0x112/0x1d0 dummy_timer+0xaaa/0x19a0 lock_is_held_type+0x9a/0x110 __lock_acquire+0x467/0x28b0 mark_held_locks+0x40/0x70 _raw_spin_unlock_irqrestore+0x44/0x60 lockdep_hardirqs_on_prepare+0xbb/0x1a0 __hrtimer_run_queues+0x101/0x520 hrtimer_run_softirq+0xd0/0x130 handle_softirqs+0x15b/0x670 __irq_exit_rcu+0xd0/0x170 irq_exit_rcu+0xe/0x20 sysvec_apic_timer_interrupt+0x6c/0x80 asm_sysvec_apic_timer_interrupt+0x1a/0x20

In the Linux kernel, the following vulnerability has been resolved: pmdomain: mediatek: Fix possible nullptr KP in HWV cleanup/on-check Should probe fail for HW_VOTER type power domains, this driver was unconditionally trying to perform cleanup for DIRECT_CTL domains, but only after checking if the target domain is powered on... with the DIRECT_CTL scpsys_domain_is_on() code again. And there's more: the scpsys_domain_is_on() function is also being unconditionally used in the probe path, for any power domain that has flag MTK_SCPD_KEEP_DEFAULT_OFF! This bug was never experienced by anyone because the HWV domains never failed probe, and because none of those is declared with the aforementioned flag - but it's still something critical. In order to fix this, add a check for MTCMOS Type and, based on that, call the correct functions for an "is on" check, and also do the same for the cleanup path, calling the correct functions for the "power off" action. For the latter, since there's a call to pm_genpd_remove() right before calling power_off, be cautious and add a variation of the power off functions (with a _internal suffix) for those to get a pointer to scpsys_domain instead of one to generic_pm_domain as, even if that's still working, this is way too much fragile and would break at some point.

In the Linux kernel, the following vulnerability has been resolved: xprtrdma: Initialize re_id before removal registration rpcrdma_create_id() registers ep->re_rn with the rpcrdma ib_client before returning the new rdma_cm_id to rpcrdma_ep_create(). However rpcrdma_ep_create() currently stores that pointer in ep->re_id only after rpcrdma_create_id() returns. A local administrator can race an NFS/RDMA mount against RDMA device removal. If rpcrdma_remove_one() observes the just-registered notification before rpcrdma_ep_create() assigns ep->re_id, rpcrdma_ep_removal_done() calls trace_xprtrdma_device_removal(NULL). The tracepoint dereferences id->device->name and copies id->route.addr.dst_addr, so the callback can crash the kernel with a NULL pointer dereference. Store the rdma_cm_id in ep->re_id immediately before publishing ep->re_rn. The existing error path still destroys the id directly if registration fails; ep is then freed by the caller without using ep->re_id. Remove the later duplicate assignment in rpcrdma_ep_create().

In the Linux kernel, the following vulnerability has been resolved: dmaengine: dma-axi-dmac: Properly free struct axi_dmac_desc Use axi_dmac_free_desc() to free fully the descriptor at fail path when call axi_dmac_alloc_desc() in axi_dmac_prep_peripheral_dma_vec().

In the Linux kernel, the following vulnerability has been resolved: net: watchdog: fix refcount tracking races Blamed commit converted the untracked dev_hold()/dev_put() calls in the watchdog code to use the tracked dev_hold_track()/dev_put_track() (which were later renamed/interfaced to netdev_hold() and netdev_put()). By introducing dev->watchdog_dev_tracker to store the reference tracking information without adding synchronization between netdev_watchdog_up() and dev_watchdog(), it enabled the race condition where this pointer could be overwritten or freed concurrently, leading to the list corruption crash syzbot reported: list_del corruption, ffff888114a18c00->next is NULL kernel BUG at lib/list_debug.c:52 ! Oops: invalid opcode: 0000 [#1] SMP KASAN PTI CPU: 1 UID: 0 PID: 91 Comm: kworker/u8:5 Not tainted syzkaller #0 PREEMPT(lazy) Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/09/2026 Workqueue: events_unbound linkwatch_event RIP: 0010:__list_del_entry_valid_or_report.cold+0x22/0x2a lib/list_debug.c:52 Call Trace: <TASK> __list_del_entry_valid include/linux/list.h:132 [inline] __list_del_entry include/linux/list.h:246 [inline] list_move_tail include/linux/list.h:341 [inline] ref_tracker_free+0x1a7/0x6c0 lib/ref_tracker.c:329 netdev_tracker_free include/linux/netdevice.h:4491 [inline] netdev_put include/linux/netdevice.h:4508 [inline] netdev_put include/linux/netdevice.h:4504 [inline] netdev_watchdog_down net/sched/sch_generic.c:600 [inline] dev_deactivate_many+0x28c/0xfe0 net/sched/sch_generic.c:1363 dev_deactivate+0x109/0x1d0 net/sched/sch_generic.c:1397 linkwatch_do_dev net/core/link_watch.c:184 [inline] linkwatch_do_dev+0xd3/0x120 net/core/link_watch.c:166 __linkwatch_run_queue+0x3a5/0x810 net/core/link_watch.c:240 linkwatch_event+0x8f/0xc0 net/core/link_watch.c:314 process_one_work+0xa0e/0x1980 kernel/workqueue.c:3314 process_scheduled_works kernel/workqueue.c:3397 [inline] worker_thread+0x5ef/0xe50 kernel/workqueue.c:3478 kthread+0x370/0x450 kernel/kthread.c:436 ret_from_fork+0x69a/0xc80 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 This patch has three coordinated parts: 1) Add dev->watchdog_lock and dev->watchdog_ref_held to serialize watchdog operations. 2) Remove netdev_watchdog_up() call from netif_carrier_on(): This ensures netdev_watchdog_up() is only called from process/BH context (via linkwatch workqueue dev_activate()), allowing us to use spin_lock_bh() for synchronization. 3) Synchronize watchdog up and watchdog timer: Protect netdev_watchdog_up() with tx_global_lock and watchdog_lock. Only allocate a new tracker in netdev_watchdog_up() if one is not already present. In dev_watchdog(), ensure we don't release the tracker if the timer was rescheduled either by dev_watchdog() itself or concurrently by netdev_watchdog_up().

In the Linux kernel, the following vulnerability has been resolved: tipc: fix UAF in tipc_l2_send_msg() Syzbot reported a slab-use-after-free in ipvlan_hard_header() when called from tipc_l2_send_msg(). The root cause is that tipc_disable_l2_media() calls synchronize_net() while b->media_ptr is still valid. This allows concurrent RCU readers to obtain the device pointer after synchronize_net() has finished. The pointer is cleared later in bearer_disable(), but without any subsequent synchronization, allowing the device to be freed while still in use by readers. Fix this by clearing b->media_ptr in tipc_disable_l2_media() before calling synchronize_net(). This is safe to do now because the call order in bearer_disable() was reversed in 0d051bf93c06 ("tipc: make bearer packet filtering generic") to call tipc_node_delete_links() (which needs the pointer) before disable_media(). https: //lore.kernel.org/netdev/[email protected]/T/#u

In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_hfsc: Don't make class passive twice update_vf() is called from two places for the same class during a single dequeue when the class's child qdisc (e.g. codel/fq_codel) drops its last packets while dequeuing: 1. The child calls qdisc_tree_reduce_backlog(), which, now that the child is empty, invokes hfsc_qlen_notify() -> update_vf(cl, 0, 0) and turns the class passive (cl_nactive is decremented up the hierarchy). 2. hfsc_dequeue() then calls update_vf(cl, qdisc_pkt_len(skb), cur_time) to charge the dequeued bytes. On the second call the class is already passive, but its child qdisc is still empty, so update_vf() arms go_passive again: if (cl->qdisc->q.qlen == 0 && cl->cl_flags & HFSC_FSC) go_passive = 1; The leaf is then skipped by the cl_nactive == 0 check inside the loop, which does not clear go_passive, so the stale go_passive propagates to the parent and decrements its cl_nactive a second time. A parent that still has other active children is driven to cl_nactive == 0 and removed from the vttree, even though those siblings are still backlogged. They are never dequeued again and the qdisc stalls. Fix this by only arming go_passive when the class is actually active, so an already-passive class no longer triggers a second passive transition. The byte accounting (cl->cl_total += len) still runs for every ancestor, so dequeued bytes continue to be counted exactly once.

In the Linux kernel, the following vulnerability has been resolved: drm/xe: fix NPD in bo_meminfo() When a buffer object is purged, its ttm.resource is set to NULL via the TTM pipeline gutting flow. However, the BO remains in the client's object list until userspace explicitly closes the GEM handle. If memory stats are queried during this time, accessing bo->ttm.resource->mem_type will result in a NULL pointer dereference. Fix this by safely skipping purged BOs in bo_meminfo, as they no longer consume any memory. User is getting NPD on device resume, and possible theory is that in bo_move(), if we need to evict something to SYSTEM to save the CCS state, but the BO is marked as dontneed, this won't trigger a move but will nuke the pages, leaving us with a NULL bo resource. And the meminfo() doesn't look ready to handle a NULL resource. v2 (Sashiko): - There could potentially be other cases where we might end up with a NULL resource, so make this a general NULL check for now. (cherry picked from commit c9a8e7daa0afe3161111e27fd92176e608c7f186)

In the Linux kernel, the following vulnerability has been resolved: platform/x86: bitland-mifs-wmi: Fix NULL pointer dereference during suspend/resume The driver registers two distinct WMI devices: a control device (BITLAND_WMI_CONTROL) and an event device (BITLAND_WMI_EVENT). During the probe phase, the event device handling path returns early before initializing the platform profile device (data->pp_dev), leaving it NULL. However, the PM sleep operations are registered globally for the WMI driver and are triggered for both devices. When entering suspend, the event device invokes bitland_mifs_wmi_suspend(), which passes the uninitialized data->pp_dev (NULL) into laptop_profile_get(). This leads to a NULL pointer dereference inside dev_get_drvdata(), causing a kernel Oops and halting the suspend sequence. Fix this by adding a validity check for data->pp_dev in both the suspend and resume callbacks, safely skipping profile operations for the event device.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix HV VHCA stats zero-sized buffer allocation mlx5e_hv_vhca_stats_create() is called from mlx5e_nic_enable(), before mlx5e_open(). At that point priv->stats_nch is still zero, because it is only ever incremented in mlx5e_channel_stats_alloc(), which is reached only from mlx5e_open_channel(). mlx5e_hv_vhca_stats_buf_size() therefore returns 0, and kvzalloc(0, GFP_KERNEL) returns ZERO_SIZE_PTR ((void *)16) rather than NULL. The "if (!buf)" guard does not catch this, and mlx5e_hv_vhca_stats_create() completes "successfully" with priv->stats_agent.buf set to ZERO_SIZE_PTR. Once channels are opened (priv->stats_nch > 0) and the hypervisor enables stats reporting, mlx5e_hv_vhca_stats_work() recomputes buf_len using the new non-zero stats_nch and calls memset(buf, 0, buf_len) on ZERO_SIZE_PTR, faulting at address 0x10. Allocate the buffer based on priv->max_nch, which is set in mlx5e_priv_init() and is the upper bound on stats_nch: - Add a separate helper mlx5e_hv_vhca_stats_buf_max_size() that returns sizeof(per_ring_stats) * max(max_nch, stats_nch), and use it for the kvzalloc() in mlx5e_hv_vhca_stats_create(). - Keep mlx5e_hv_vhca_stats_buf_size() (which returns based on stats_nch) for the worker's active payload size, so the wire format (block->rings = stats_nch) and the amount of data filled by mlx5e_hv_vhca_fill_stats() are unchanged. The max(max_nch, stats_nch) guard handles the rare case where mlx5e_attach_netdev() recomputes max_nch downward across a detach/resume cycle while priv->stats_nch persists (mlx5e_detach_netdev does not call mlx5e_priv_cleanup, so stats_nch is only reset when the netdev is destroyed). Without the guard, the worker could compute buf_len from stats_nch and overrun the smaller buffer allocated based on the reduced max_nch. Allocating a non-zero buffer also makes the kvzalloc() failure path in mlx5e_hv_vhca_stats_create() reachable for the first time: it returns early without (re)creating the agent. Clear priv->stats_agent.{agent,buf} in mlx5e_hv_vhca_stats_destroy() after freeing them, so that if a later create() bails out on this path, a subsequent teardown does not double-free the stale agent/buffer left from a previous enable/disable cycle. This mirrors the existing mlx5e pattern of preallocating arrays of size max_nch (e.g. priv->channel_stats) and lazily populating entries up to stats_nch on demand.

In the Linux kernel, the following vulnerability has been resolved: drm/fb-helper: Only consider active CRTCs for vblank sync Only synchronize fbdev output to the vblank of an active CRTC. Go over the list of CRTCs and pick the first that matches. Fixes warnings as the one shown below [ 77.201354] WARNING: drivers/gpu/drm/drm_vblank.c:1320 at drm_crtc_wait_one_vblank+0x194/0x1cc [drm], CPU#1: kworker/1:7/1867 [ 77.201354] omapdrm omapdrm.0: [drm] vblank wait timed out on crtc 0 This currently happens if the fbdev output is not on CRTC 0. Atomic and non-atomic drivers require distinct code paths. As for other fbdev operations, implement both and select the correct one at runtime. Not finding an active CRTC is not a bug. Do not wait in this case, but flush the display update as before. v4: - avoid possible deadlocks with locking context (Sashiko) v3: - drop excessive state validation (Jani) - acquire plane and CRTC mutices (Sashiko) v2: - move look-up code into separate helper - support drivers with legacy modesetting v1: - see https://lore.kernel.org/dri-devel/[email protected]/

In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Prevent PM resume deadlock in hwctx_sync_debug_bo() amdxdna_hwctx_sync_debug_bo() invokes the hardware hwctx_sync_debug_bo() callback while holding xdna->dev_lock. The callback may call amdxdna_cmd_submit(), which in turn calls amdxdna_pm_resume_get(). If the device is suspended, amdxdna_pm_resume_get() may synchronously execute amdxdna_pm_resume(), which also acquires xdna->dev_lock, resulting in a deadlock. Avoid the deadlock by calling amdxdna_pm_resume_get() before holding xdna->dev_lock in both amdxdna_hwctx_sync_debug_bo() and amdxdna_drm_config_hwctx_ioctl()

In the Linux kernel, the following vulnerability has been resolved: dm era: fix NULL pointer dereference in metadata_open() metadata_open() returns NULL when kzalloc_obj() fails, but the caller era_ctr() only checks IS_ERR(md). Since IS_ERR(NULL) returns false, the NULL pointer is treated as a valid result and later assigned to era->md, leading to a NULL pointer dereference when the metadata is accessed. Fix this by returning ERR_PTR(-ENOMEM) on allocation failure, consistent with dm-cache-metadata.c, dm-thin-metadata.c, and dm-clone-metadata.c which all use ERR_PTR(-ENOMEM) for the same pattern.

In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: q6apm: fix NULL pointer dereference in graph_callback When q6apm_free_fragments() is called it frees rx_data.buf/tx_data.buf and sets them to NULL under graph->lock. A late DSP buffer-done response can race with this: graph_callback() passes the !graph->ar_graph guard (not yet NULL), acquires the lock, but then dereferences a now-NULL buf pointer to read buf[token].phys, crashing at virtual address 0x10. Add a NULL check for buf inside the mutex-protected section in both the write-done (DATA_CMD_RSP_WR_SH_MEM_EP_DATA_BUFFER_DONE_V2) and read-done (DATA_CMD_RSP_RD_SH_MEM_EP_DATA_BUFFER_V2) handlers and bail out cleanly if buffers have already been freed. This problem is only shown up recently while apr bus was updated to process the commands per service rather from single global queue.

In the Linux kernel, the following vulnerability has been resolved: ASoC: mediatek: mt8192: Release reserved memory on cleanup The MT8192 AFE probe calls of_reserved_mem_device_init() and falls back to preallocated buffers when no reserved memory region is available. When the reserved memory assignment succeeds, however, the driver never releases it. Register a devm cleanup action after a successful reserved-memory assignment so the assignment is released on probe failure and driver unbind.