CVE Feed

In the Linux kernel, the following vulnerability has been resolved: drm/panthor: Fix a leak when a group is evicted before the tiler OOM is serviced A group ref is tied to the pending tiler_oom_work, so we need to release it if the cancel was effective.

In the Linux kernel, the following vulnerability has been resolved: ipv6: fib6: fix NULL deref in fib6_walk_continue() on multi-batch dump inet6_dump_fib() saves its progress in cb->args[1] as a positional index within the current hash chain. Between batches, a concurrent fib6_new_table() can insert a new table at the chain head, shifting all existing entries. The saved index then lands on a different table, causing fib6_dump_table() to set w->root to the wrong table while w->node still points into the previous one. fib6_walk_continue() dereferences w->node->parent (NULL) and panics: BUG: kernel NULL pointer dereference, address: 0000000000000008 RIP: 0010:fib6_walk_continue+0x6e/0x170 Call Trace: <TASK> fib6_dump_table.isra.0+0xc5/0x240 inet6_dump_fib+0xf6/0x420 rtnl_dumpit+0x30/0xa0 netlink_dump+0x15b/0x460 netlink_recvmsg+0x1d6/0x2a0 ____sys_recvmsg+0x17a/0x190 Fix by storing tb->tb6_id in cb->args[1] instead of a positional index. On resume, skip entries until the id matches; a concurrent head-insert can never match the saved id, so the walker always resumes on the correct table.

In the Linux kernel, the following vulnerability has been resolved: hwmon: (aspeed-g6-pwm-tach) Guard fan RPM calculation against divide-by-zero Sashiko reports: In the aspeed-g6-pwm-tacho driver, the aspeed_tach_val_to_rpm() function calculates the fan RPM using the tachometer value. However, it does not check if the tachometer value is zero before performing the division. If the hardware reports a tachometer value of 0 (which can happen due to an extremely fast pulse, a stuck edge, or a hardware glitch), the calculated tach_div evaluates to 0. The subsequent call to do_div() with tach_div as the divisor triggers a divide-by-zero exception, leading to a kernel panic. Check the divisor against zero to fix the problem.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix insn_aux_data leak on verifier err_free_env path When bpf_check() allocates env->insn_aux_data successfully but later fails to allocate env->succ, it jumps directly to err_free_env. The existing vfree(env->insn_aux_data) sits before the err_free_env label, so that direct jump bypasses it and leaks insn_aux_data. Move vfree(env->insn_aux_data) into err_free_env so all early and late exit paths release it consistently.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_nat: avoid invalid nat_net pointer use on failed nf_nat_init() We ran into below KASAN splat, which is mostly uninteresting, beside for having nf_nat_register_fn() in the call chain as a cause for the offending access: ================================================================== BUG: KASAN: slab-out-of-bounds in nf_nat_register_fn+0x5f9/0x640 Read of size 8 at addr ffff890031e54c20 by task iptables/9510 CPU: 0 UID: 0 PID: 9510 Comm: iptables Not tainted 6.18.18-grsec-full-20260320181326 #1 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Call Trace: <TASK> […] dump_stack_lvl+0xee/0x160 ffff88004117eeb8 […] print_report+0x6e/0x640 ffff88004117eee0 […] ? __phys_addr+0x8e/0x140 ffff88004117eef0 […] ? kasan_addr_to_slab+0x51/0xe0 ffff88004117ef08 […] ? complete_report_info+0xec/0x1c0 ffff88004117ef20 […] ? nf_nat_register_fn+0x5f9/0x640 ffff88004117ef48 […] kasan_report+0xbc/0x140 ffff88004117ef50 […] ? nf_nat_register_fn+0x5f9/0x640 ffff88004117ef90 […] nf_nat_register_fn+0x5f9/0x640 ffff88004117eff8 […] ? nf_nat_icmp_reply_translation+0x6e0/0x6e0 ffff88004117f070 […] nf_tables_register_hook.part.0+0xa0/0x220 ffff88004117f080 […] nf_tables_addchain.constprop.0+0x1054/0x1fc0 ffff88004117f0b8 […] ? nft_chain_lookup.part.0+0x4ce/0xac0 ffff88004117f130 […] ? nf_tables_abort+0x3d80/0x3d80 ffff88004117f190 […] ? nf_tables_dumpreset_obj+0x100/0x100 ffff88004117f1c8 […] ? nft_table_lookup.part.0+0x255/0x300 ffff88004117f310 […] ? nf_tables_newchain+0x21a4/0x2fa0 ffff88004117f358 […] nf_tables_newchain+0x21a4/0x2fa0 ffff88004117f360 […] ? nf_tables_addchain.constprop.0+0x1fc0/0x1fc0 ffff88004117f458 […] ? nla_get_range_signed+0x4a0/0x4a0 ffff88004117f488 […] ? lock_acquire+0x16f/0x320 ffff88004117f490 […] ? find_held_lock+0x3b/0xe0 ffff88004117f4b0 […] ? __nla_parse+0x45/0x80 ffff88004117f500 […] nfnetlink_rcv_batch+0xbca/0x19a0 ffff88004117f550 […] ? nfnetlink_net_exit_batch+0x120/0x120 ffff88004117f618 […] ? __sanitizer_cov_trace_switch+0x63/0xe0 ffff88004117f720 […] ? gr_acl_handle_mmap+0x1c4/0x320 ffff88004117f7c0 […] ? nla_get_range_signed+0x4a0/0x4a0 ffff88004117f7e8 […] ? gr_is_capable+0x6f/0xe0 ffff88004117f830 […] ? __nla_parse+0x45/0x80 ffff88004117f860 […] ? skb_pull+0x103/0x1a0 ffff88004117f880 […] nfnetlink_rcv+0x3db/0x4a0 ffff88004117f8b0 […] ? nfnetlink_rcv_batch+0x19a0/0x19a0 ffff88004117f8d8 […] ? netlink_lookup+0xe2/0x240 ffff88004117f900 […] netlink_unicast+0x74b/0xb00 ffff88004117f930 […] ? netlink_attachskb+0xb20/0xb20 ffff88004117f980 […] ? __check_object_size+0x3e/0xaa0 ffff88004117f998 […] ? security_netlink_send+0x51/0x160 ffff88004117f9c8 […] netlink_sendmsg+0xa03/0x1200 ffff88004117f9f8 […] ? netlink_unicast+0xb00/0xb00 ffff88004117fa70 […] ? netlink_unicast+0xb00/0xb00 ffff88004117fac8 […] ? ____sys_sendmsg+0xe2a/0x1040 ffff88004117faf8 […] ____sys_sendmsg+0xe2a/0x1040 ffff88004117fb00 […] ? kernel_recvmsg+0x300/0x300 ffff88004117fb60 […] ? reacquire_held_locks+0xe9/0x260 ffff88004117fbc8 […] ___sys_sendmsg+0x138/0x200 ffff88004117fbf8 […] ? do_recvmmsg+0x7e0/0x7e0 ffff88004117fc30 […] ? lockdep_hardirqs_on_prepare+0x101/0x1e0 ffff88004117fc50 […] ? lock_acquire+0x16f/0x320 ffff88004117fd20 […] ? lock_acquire+0x16f/0x320 ffff88004117fd58 […] ? find_held_lock+0x3b/0xe0 ffff88004117fd70 […] __sys_sendmsg+0x17a/0x260 ffff88004117fdc8 […] ? __sys_sendmsg_sock+0x80/0x80 ffff88004117fdf0 […] ? syscall_trace_enter+0x15e/0x2c0 ffff88004117fe98 […] do_syscall_64+0x7d/0x400 ffff88004117fec8 […] entry_SYSCALL_64_safe_stack+0x4a/0x60 ffff88004117fef8 </TASK> ================================================================== The out-of-bounds report, though, is a red herring as it is f ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ipv4: fib: Don't ignore error route in local/main tables. When CONFIG_IP_MULTIPLE_TABLES is enabled but no rule is added, fib_lookup() performs route lookup directly on two tables. Since the first lookup does not properly bail out, the result of an error route in the merged local/main table could be overwritten by another route in the default table: # unshare -n # ip link set lo up # ip route add 192.168.0.0/24 dev lo table 253 # ip route add unreachable 192.168.0.0/24 # ip route get 192.168.0.1 192.168.0.1 dev lo table default uid 0 cache <local> Once a random rule is added, the error route is respected: # ip rule add table 0 # ip rule del table 0 # ip route get 192.168.0.1 RTNETLINK answers: No route to host Let's fix the inconsistent behaviour.

In the Linux kernel, the following vulnerability has been resolved: tpm_crb: Check ACPI_COMPANION() against NULL during probe Every platform driver can be forced to match a device that doesn't match its list of device IDs because of device_match_driver_override(), so platform drivers that rely on the existence of a device's ACPI companion object need to verify its presence. Accordingly, add a requisite ACPI_COMPANION() check against NULL to the tpm_crb driver.

In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: make sure gc is properly stopped Sashiko noticed that when destroying a set, cancel_delayed_work_sync() was called while gc calls queue_delayed_work() unconditionally which can lead not to properly shutting down the gc.

In the Linux kernel, the following vulnerability has been resolved: dma-fence: Make dma_fence_dedup_array() robust against 0-count input dma_fence_dedup_array() returns 1 when called with num_fences == 0: the for-loop body never executes, j stays at 0, and the final `return ++j` yields 1. This contradicts both the kernel-doc ("Return: Number of unique fences remaining in the array") and the natural expectation that 0 input gives 0 output. The caller __dma_fence_unwrap_merge() bails out via the `if (count == 0 || count == 1)` fast path and so is save. But amdgpu_userq_wait_*() could reach the dedup call with a zero local count and dereference an uninitialized fence slot in the array. Make the contract match the documentation by returning 0 early. This also skips an unnecessary sort() call on an empty array.

In the Linux kernel, the following vulnerability has been resolved: dm-integrity: fix a bug if the bio is out of limits If dm_integrity_check_limits fails, the code would exit with DM_MAPIO_KILL. However, the range would be already locked at this point, and it wouldn't be unlocked, resulting in a deadlock. Let's move the limit check up, so that when it exits, no resources are leaked.

In the Linux kernel, the following vulnerability has been resolved: dm: avoid leaking the caller's thread keyring via the table device file The refactoring in commit a28d893eb327 ("md: port block device access to file") accidentally causes the caller's thread keyring to be kept alive long beyond the caller's lifetime. As a result, "cryptsetup luksSuspend" silently fails to wipe the LUKS volume key from memory. In detail: "cryptsetup luksOpen" uses its supposedly ephemeral thread keyring to pass the volume key to the kernel. dm-crypt's crypt_set_keyring_key() copies the key material into its own crypt_config structure and then drops its own reference to the key in the keyring with key_put(). With this fix, restoring pre-v6.9 behavior, the copy in the thread keyring is then promptly garbage collected, such that exactly one copy of the volume key remains. This single copy is correctly wiped from memory on "cryptsetup luksSuspend". Without this fix, the thread keyring and the volume key in it remains. This second copy is only freed on "luksClose". "luksSuspend" neither knows about this copy nor has any way to remove it, so the key remains recoverable from RAM after a suspend that is documented to have wiped it. This fix should not introduce new security problems, as the code is anyway gated by CAP_SYS_ADMIN. The device-mapper core, not the calling task, is the legitimate owner of this long-lived file.

In the Linux kernel, the following vulnerability has been resolved: sctp: add INIT verification after cookie unpacking In SCTP handshake, the INIT chunk is initially processed by the server and embedded into the cookie carried in INIT-ACK. The client then returns this cookie via COOKIE-ECHO, where the server unpacks it and reconstructs the original INIT chunk. When cookie authentication is enabled, the cookie contents are protected against tampering, so reusing the unpacked INIT without re-verification is safe. However, when cookie authentication is disabled, the reconstructed INIT can no longer be trusted. In this case, the INIT must be explicitly validated after unpacking to avoid processing potentially tampered data. Add sctp_verify_init() checks after cookie unpacking in COOKIE-ECHO processing paths (sctp_sf_do_5_1D_ce() and sctp_sf_do_5_2_4_dupcook()) when cookie_auth_enable is disabled. On failure, the new association is freed and the packet is discarded. Also tighten cookie validation in sctp_unpack_cookie() by verifying the embedded chunk type is SCTP_CID_INIT before treating it as an INIT chunk. Finally, update sctp_verify_init() to validate parameter bounds using the actual embedded INIT length instead of chunk->chunk_end, since the INIT stored in COOKIE-ECHO may not span the entire chunk buffer.

In OpenStack Ironic before 38.0.1, the autodetect deploy interface may fail to run cleaning immediately after enrollment with, or changing to, the autodetect deploy interface.

OpenVPN 2.7_alpha1 through 2.7.5 using mbedTLS allows remote authenticated users to be misidentified by ignoring the configured X.509 username identity lookup field

The Windows interactive service in OpenVPN 2.4.0 through 2.6.21 and 2.7_alpha1 through 2.7.5 allows local authenticated users to bypass the trusted configuration directory constraint and load arbitrary configuration files via crafted options that bypass whitelist checks

Microsoft is aware of an elevation of privilege in the Microsoft Malware Protection Engine in Microsoft Defender publicly referred to as &quot;ShieldBreak &quot;.

Laravel Socialite's Facebook provider contains an authentication bypass vulnerability that allows unauthenticated attackers to replay captured OIDC id_tokens by exploiting the missing nonce claim validation in the getUserByOIDCToken() function within FacebookProvider.php. Attackers who obtain a valid, unexpired id_token issued for the same Facebook App ID can submit the captured token to the backend userFromToken() endpoint, bypassing authentication controls because signature, aud, and iss checks pass while no session-bound nonce comparison is performed, resulting in unauthorized access to victim accounts.

This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. CVE-2026-73294 published by GitHub

Improper neutralization of special elements used in a command ('command injection') in Microsoft PowerShell allows an authorized attacker to execute code locally.

OpenStack Octavia through 18.0.0 mishandles quality of service (QoS) policy authorization. By associating another project's QoS policy with an amphora, an authenticated user may prevent deletion of that policy. All Octavia deployments are affected.

Joomla Extension - icagenda.com - CSRF on frontend registration actions in iCagenda < 2.0.0-4.0.11 - Multiple state changing operations in the frontend are callable without a CSRF token check.

Joomla Extension - icagenda.com - ACL bypass allowing arbitrary user enumeration < 2.0.0-4.0.11 - A backend operator granted access scoped to `com_icagenda` only could enumerate Joomla user profiles.

Joomla Extension - icagenda.com - Authenticated SQL injection via unescaped numeric filter in iCagenda < 2.0.0-4.0.11 - Backend operators with permissions to access iCagenda could inject SQL.

Joomla Extension - icagenda.com - Unauthenticated SQL injection in iCagenda < 4.0.0-4.0.11 - Unauthenticated SQL injection in mod_icagenda_calendar (iCagenda), reachable via com_ajax with no session, token or account.

PAX Technology Q80 Application Installer Signature Verification Bypass Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of PAX Technology Q80. Authentication is not required to exploit this vulnerability. The specific flaw exists within the application installer. The issue results from the lack of proper verification of a cryptographic signature before installing an application. An attacker can leverage this in conjunction with other vulnerabilities to execute code in the context of root. Was ZDI-CAN-30585.

PAX Technology Q80 XCB Daemon Missing Authentication Vulnerability. This vulnerability allows network-adjacent attackers to disclose sensitive information and modify configuration on affected installations of PAX Technology Q80. Authentication is not required to exploit this vulnerability. The specific flaw exists within the XCB daemon. The issue results from the lack of authentication prior to allowing access to functionality. An attacker can leverage this in conjunction with other vulnerabilities to execute arbitrary code in the context of root. Was ZDI-CAN-30584.

PAX Technology Q80 AIP File Parsing Link Following Remote Code Execution Vulnerability. This vulnerability allows network-adjacent attackers to execute arbitrary code on affected installations of PAX Technology Q80. Authentication is not required to exploit this vulnerability. The specific flaw exists within the parsing of AIP files. By creating a symbolic link, an attacker can abuse the installer process to write arbitrary files. An attacker can leverage this in conjunction with other vulnerabilities to execute code in the context of root. Was ZDI-CAN-30583.

Cockpit CMS 2.14.0 and prior contains a command injection vulnerability in the FFmpeg integration that allows authenticated users with only the assets/upload permission to execute arbitrary commands by uploading a video file with a shell metacharacter-laden filename. The unsanitized filename is interpolated into a shell command executed via Process::fromShellCommandline() before the slugify() sanitizer runs, enabling injected shell metacharacters such as backticks, $(), and semicolons to escape the FFmpeg command context and execute as the web-server user.

External control of file name or path vulnerability in Johnson Controls Airwall allows : File Manipulation. This issue affects Airwall: before 4.1.

Use of hard-coded cryptographic key vulnerability in Johnson Controls Airwall allows : Cryptanalytic Attack. This issue affects Airwall: before 4.1.

IBM Db2 Mirror for i 7.4, 7.5, and 7.6 could allow a remote authenticated attacker to obtain sensitive information due to improper limitation of a pathname to a restricted directory.

IBM Db2 Mirror for i 7.4, 7.5, and 7.6 could allow a remote authenticated attacker to delete arbitrary files due to path traversal.

IBM Db2 Mirror for i 7.4, 7.5, and 7.6 could allow a remote authenticated attacker to bypass security restrictions due to improper neutralization of special elements used in an SQL command.

IBM Db2 Mirror for i 7.4, 7.5, and 7.6 could allow a remote authenticated attacker to execute arbitrary scripts due to cross-site scripting.

IBM Db2 Mirror for i 7.4, 7.5, and 7.6 could allow a remote attacker to execute arbitrary CL commands due to improper neutralization of special elements in a command.

IBM Db2 Mirror for i 7.4, 7.5, and 7.6 could allow a remote attacker to execute arbitrary code due to external control of file name or path.

IBM Db2 Mirror for i 7.4, 7.5, and 7.6 could allow a remote attacker to bypass authentication and obtain or alter sensitive information due to improper validation of request URI path segments.

Cwe-327 Use of a Broken or Risky Cryptographic Algorithm vulnerability in Johnson Controls TL280 allows Cryptanalytic Attack. This issue affects TL280: before 5.63.

IBM Db2 Mirror for i 7.4, 7.5, and 7.6 could allow a remote attacker to write files to arbitrary locations due to path traversal.

IBM Db2 Mirror for i 7.4, 7.5, and 7.6 could allow a remote authenticated attacker to cause a denial of service due to command injection.

IBM Db2 Mirror for i 7.4, 7.5, and 7.6 could allow a remote attacker to cause a denial of service due to uncontrolled recursion.

IBM Db2 Mirror for i 7.4, 7.5, and 7.6 could allow a remote authenticated attacker to obtain sensitive information due to improper authentication enforcement.

IBM Db2 Mirror for i 7.4, 7.5, and 7.6 could allow a remote authenticated attacker to obtain sensitive information due to improper validation of file paths.

IBM Db2 Mirror for i 7.4, 7.5, and 7.6 could allow a remote attacker to write arbitrary files due to improper limitation of a pathname to a restricted directory.

IBM Db2 Mirror for i 7.4, 7.5, and 7.6 could allow a remote authenticated attacker to bypass security restrictions due to the ability to disable server-side input validation via a request parameter.

IBM Db2 Mirror for i 7.4, 7.5, and 7.6 could allow a remote authenticated attacker to obtain sensitive information due to improper input validation.

IBM Db2 Mirror for i 7.4, 7.5, and 7.6 could allow a remote authenticated attacker to obtain sensitive information due to improper authentication.

IBM Db2 Mirror for i 7.4, 7.5, and 7.6 could allow a remote authenticated attacker to bypass security restrictions due to improper authorization using user-supplied input.

IBM Db2 Mirror for i 7.4, 7.5, and 7.6 could allow a remote attacker to obtain sensitive information due to external control of system configuration.

js-toml is a TOML parser for JavaScript, Prior to version 1.1.2, the interpreter checks whether a key already exists in a parser-built container with `if (object[key])` instead of `if (key in object)`. When the prior value is a falsy primitive — `false`, `0`, `0n`, `0.0`, `-0`, or `""` — the duplicate-key branch is skipped and the value is silently overwritten by a later sub-table, dotted-key sub-table, or array-of-tables sharing the same name. Per the TOML 1.0.0 spec ("Defining a key multiple times is invalid"; "You cannot define any key or table more than once"), this should be a parse error. The result is structural type confusion of attacker-named keys in the value returned by `load()`. A boolean-typed `false` (or numeric `0`) becomes a truthy object. Host applications that gate behavior on `if (config.flag)`, `if (!user.banned)`, `if (config.allowDelete)`, or `if (config.publicMode)` will silently take the truthy branch. This is distinct from GHSA-65fc-cr5f-v7r2 (the 1.0.2 prototype-pollution fix). `Object.prototype` is not polluted. The `Object.create(null)` mitigation from 1.0.2 is intact; the bug here is in the duplicate-key state machine, not in container construction. Version 1.1.2 patches the incorrect comparison.