CVE Feed

In the Linux kernel, the following vulnerability has been resolved: xfrm: nat_keepalive: avoid double free on send error nat_keepalive_send() frees the keepalive skb whenever the IPv4 or IPv6 send helper reports an error. That cleanup is only correct before the skb is handed to the output path. Once ip_build_and_send_pkt() or ip6_xmit() takes ownership, the networking stack may already have consumed the skb before returning an error, so freeing it again is unsafe. Handle the pre-handoff failure cases inside nat_keepalive_send_ipv4() and nat_keepalive_send_ipv6(), where the caller still owns the skb, and keep nat_keepalive_send() responsible only for family dispatch and the unsupported-family cleanup path.

In the Linux kernel, the following vulnerability has been resolved: tcp: defer md5sig_info kfree past RCU grace period in tcp_connect The md5+ao reconciliation in tcp_connect() (net/ipv4/tcp_output.c) has two symmetric branches: if (needs_md5) { tcp_ao_destroy_sock(sk, false); } else if (needs_ao) { tcp_clear_md5_list(sk); kfree(rcu_replace_pointer(tp->md5sig_info, NULL, ...)); } Both branches free a per-socket auth-info object while the socket is in TCP_SYN_SENT and is already on the inet ehash (inserted by inet_hash_connect() in tcp_v4_connect()). Both branches are reachable by softirq RX-path readers that load the corresponding info pointer via implicit RCU before bh_lock_sock_nested() is taken. The needs_md5 branch is fixed in the prior patch by re-introducing the call_rcu() free in tcp_ao_destroy_sock(): the equivalent per-key loop runs inside tcp_ao_info_free_rcu(), the RCU callback, so by the time it frees each tcp_ao_key all softirq readers that captured the container have already completed rcu_read_unlock(). The needs_ao branch is not symmetric in the same way. The container free can be deferred via kfree_rcu(md5sig, rcu) -- struct tcp_md5sig_info already has the required rcu member (include/net/tcp.h:1999-2002), and the rest of the tree already does this in the tcp_md5sig_info_add() rollback paths (net/ipv4/tcp_ipv4.c:1410, 1436). But the per-key teardown is done by tcp_clear_md5_list() in process context BEFORE the container's RCU grace period: it walks &md5sig->head and frees each tcp_md5sig_key with bare hlist_del + kfree. A concurrent softirq reader in __tcp_md5_do_lookup() / __tcp_md5_do_lookup_exact() (tcp_ipv4.c:1253, 1298) walks the same list via hlist_for_each_entry_rcu() and races with that bare kfree on the keys themselves -- a per-key slab use-after-free of the same class as the TCP-AO bug, on the same race window. Fix this in two halves: 1. Convert the bare kfree() in tcp_connect() to kfree_rcu() so the md5sig_info container joins the rest of the md5sig lifecycle. The local-variable lift is mechanical and required because kfree_rcu() is a macro that expects an lvalue. 2. Make tcp_clear_md5_list() RCU-safe by replacing hlist_del + kfree(key) with hlist_del_rcu + kfree_rcu(key, rcu). struct tcp_md5sig_key already carries the rcu member (include/net/tcp.h:1995) and tcp_md5_do_del() (net/ipv4/tcp_ipv4.c:1456) already uses kfree_rcu, so this restores the lifecycle invariant the rest of the file follows rather than introducing a one-off. The other caller of tcp_clear_md5_list() is tcp_md5_destruct_sock() (net/ipv4/tcp.c:412), which runs from the sock destructor when the socket is already unhashed and unreachable; the extra grace period there is unnecessary but harmless. Making the helper unconditionally RCU-safe is the cleaner contract. The needs_ao branch is not reachable by the userns reproducer used to demonstrate the AO-side splat (the repro installs both keys but ends up in the needs_md5 branch because the connect peer matches the MD5 key, not the AO key); however the symmetric race exists and a maintainer touching this code should not have to think about which branch escapes RCU and which one does not. [also credits to Qihang, who found that this races with tcp-diag]

In the Linux kernel, the following vulnerability has been resolved: dmaengine: dw-edma-pcie: Reject devices without driver data dw_edma_pcie_probe() treats the PCI device ID driver_data as the template for the controller layout and copies it unconditionally. A device bound dynamically via sysfs can match the driver without that data, which leads to a NULL pointer dereference. Reject such matches before enabling the device.

In the Linux kernel, the following vulnerability has been resolved: platform/x86/intel/tpmi: use cleanup helpers in mem_write() In mem_write(), the temporary array returned by parse_int_array_user() must be released on all exit paths. Convert the array variable to use cleanup.h scope-based cleanup so it is freed automatically on return. This also moves the array declaration next to parse_int_array_user() as required by cleanup.h usage guidelines.

In the Linux kernel, the following vulnerability has been resolved: net: thunderbolt: Fix frags[] overflow by bounding frame_count tbnet_poll() assembles a multi-frame ThunderboltIP packet into one skb. The first frame goes into the skb linear area and every further frame is added as a page fragment. skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, page, hdr_size, frame_size, TBNET_RX_PAGE_SIZE - hdr_size); A packet of frame_count frames therefore ends up with frame_count - 1 fragments. tbnet_check_frame() only bounds the peer supplied frame_count to TBNET_RING_SIZE / 4 (64), which is far above MAX_SKB_FRAGS (17 by default). A peer that sends a packet of 19 or more small frames pushes nr_frags past MAX_SKB_FRAGS, so skb_add_rx_frag() writes past skb_shinfo()->frags[] and corrupts memory after the shared info. Tighten the start of packet bound to MAX_SKB_FRAGS + 1 so a packet can never produce more fragments than frags[] can hold. This matches the recent skb frags overflow fixes in other receive paths, for example f0813bcd2d9d ("net: wwan: t7xx: fix potential skb->frags overflow in RX path") and 600dc40554dc ("net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete()").

In the Linux kernel, the following vulnerability has been resolved: fpga: dfl: add bounds check in dfh_get_param_size() dfh_get_param_size() can return a parameter size larger than the feature region because the loop bounds check is evaluated before incrementing size. If the EOP (End of Parameters) bit is set in the same iteration, the inflated size is returned without re-validation against max. This can cause create_feature_instance() to call memcpy_fromio() with a size exceeding the ioremap'd region when a malicious FPGA device provides crafted DFHv1 parameter headers. Add a bounds check after the size increment to ensure the accumulated size never exceeds the feature boundary.

In the Linux kernel, the following vulnerability has been resolved: ocfs2: add journal NULL check in ocfs2_checkpoint_inode() During unmount, ocfs2_journal_shutdown() frees the journal and sets osb->journal to NULL. Later, when VFS evicts remaining cached inodes, ocfs2_evict_inode() -> ocfs2_clear_inode() -> ocfs2_checkpoint_inode() -> ocfs2_ci_fully_checkpointed() dereferences osb->journal, causing a NULL pointer dereference. Fix this by adding a NULL check for osb->journal in ocfs2_checkpoint_inode(). If the journal is NULL, it has already been fully flushed and destroyed during shutdown, so there is nothing to checkpoint.

In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: fix condition in 'nand_select_target()' 'cs' here must be in range [0:nanddev_ntargets[.

In the Linux kernel, the following vulnerability has been resolved: kho: make sure scratch size is always aligned by CMA_MIN_ALIGNMENT_BYTES When using scratch_scale, the scratch sizes are rounded up to CMA_MIN_ALIGNMENT_BYTES since they will be released as MIGRATE_CMA. This is not done when using fixed scratch sizes via command line. This can result in user specifying a size which is not aligned, and thus kernel releasing a pageblock that is only partially scratch. Do the rounding up for both cases in scratch_size_update().

In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: pl353: fix probe resource allocation During probe(), the devm_ioremap() is called with the parent device instead of the current one. So when the module is unloaded, the register area isn't released. Target the pl35x device in the devm_ioremap() instead of its parent.

In the Linux kernel, the following vulnerability has been resolved: landlock: Fix LANDLOCK_SCOPE_SIGNAL bypass on the SIGIO path LANDLOCK_SCOPE_SIGNAL must prevent a sandboxed process from signaling processes outside its Landlock domain. It can be bypassed through the asynchronous SIGIO delivery path. A sandboxed process that owns any file or socket can arm it with fcntl(fd, F_SETOWN, -pgid), fcntl(fd, F_SETSIG, SIGKILL) and O_ASYNC, so that an I/O event makes the kernel deliver the chosen signal to the whole process group. As the head of its process group's task list (the default position right after fork()) that group can also hold the non-sandboxed process that launched it, e.g. a supervisor or a security monitor. The sandbox can thus kill or signal the processes LANDLOCK_SCOPE_SIGNAL is meant to protect from it. The scope is enforced in hook_file_send_sigiotask() against the Landlock domain recorded at F_SETOWN time, not the live domain of the sender. control_current_fowner() decides whether to record that domain and skips recording it when the fowner target is in the caller's thread group, which is safe only for a single-task target (PIDTYPE_PID, PIDTYPE_TGID). For a process group (PIDTYPE_PGID) pid_task() returns only one member; recording is skipped whenever that member shares the caller's thread group, and hook_file_send_sigiotask() then lets the signal fan out to the whole group unchecked. Record the domain for every non single-process target so the scope is enforced against each group member at delivery time. That recording is necessary but not sufficient on its own: the kernel signals a process group through its members' thread-group leaders, and the leader of the registrant's own process can carry a different Landlock domain than the sibling thread that armed the owner. domain_is_scoped() would then deny that leader, even though commit 18eb75f3af40 ("landlock: Always allow signals between threads of the same process") requires same-process delivery to be allowed. hook_task_kill() avoids this by evaluating same_thread_group() live, per recipient; the SIGIO path instead delegates the whole decision to a single registration-time check, which a process-group fan-out cannot honor. So also record the registrant's thread group next to its domain and exempt it at delivery: hook_file_send_sigiotask() allows the signal whenever the recipient belongs to the registrant's own process, restoring the same-process guarantee while keeping out-of-domain group members blocked. The direct kill() path (hook_task_kill) already evaluates the live domain and is unaffected. [mic: Check pid_type earlier and improve comment, fix commit message, fix comment formatting]

In the Linux kernel, the following vulnerability has been resolved: riscv: cacheinfo: Fix node reference leak in populate_cache_leaves Currently, the while loop drops the reference to prev in each iteration. If the loop terminates early due to a break, the final of_node_put(np) correctly drops the reference to the current node. However, if the loop terminates naturally because np == NULL, calling of_node_put(np) is a no-op. This leaves the last valid node stored in prev without its reference dropped, resulting in a node reference leak. Fix this by changing the final `of_node_put(np)` to `of_node_put(prev)`.

In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: preserve pmd_swp_uffd_wp on device-private PMD downgrade change_non_present_huge_pmd() rewrites a writable device-private PMD swap entry into a readable one without carrying pmd_swp_uffd_wp() across. The PTE-level change_softleaf_pte() does this correctly; mirror that here, matching what copy_huge_pmd() does for the fork path. Without the carry, a plain mprotect() over a UFFD_WP-marked device-private THP strips the bit and the trap is bypassed on swap-in.

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: bound attr_off in UpdateResidentValue against data_off In do_action()'s UpdateResidentValue case (fslog.c:3307), lrh->attr_off and lrh->redo_len come from the on-disk LRH. When they satisfy aoff + dlen < attr->res.data_off, the assignment attr->res.data_size = cpu_to_le32(aoff + dlen - data_off); underflows to ~4 GiB (e.g. 0xFFFFFFF9 when aoff=0x10, dlen=1, data_off=0x18). Subsequent code that reads attr->res.data_size to walk the resident attribute payload would then read up to 4 GiB past the 1024-byte MFT record allocation. The existing mi_enum_attr() defense in fs/ntfs3/record.c:287 catches the corrupted data_size on the next attribute walk and fails the mount, but only on the path that walks all attributes. A read site that picks an attribute by name and reads its data_size without re-validating is not covered. Validate aoff against data_off and asize at the source. Reproduced under UML+KASAN on mainline 8d90b09e6741 via pr_warn-only probe: with aoff=0x10 and data_off=0x18, the post-assignment data_size is 0xfffffff9 (mount then fails at -22 from mi_enum_attr). [[email protected]: clang-formatted the changes]

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: bound copy_lcns dp->page_lcns[] index in analysis pass In log_replay()'s analysis pass, after find_dp() returns a valid DIR_PAGE_ENTRY for the (target_attr, target_vcn) tuple, the copy_lcns block walks lrh->lcns_follow further entries: t16 = le16_to_cpu(lrh->lcns_follow); for (i = 0; i < t16; i++) { size_t j = (size_t)(le64_to_cpu(lrh->target_vcn) - le64_to_cpu(dp->vcn)); dp->page_lcns[j + i] = lrh->page_lcns[i]; } find_dp() only validates that target_vcn falls within [dp->vcn, dp->vcn + dp->lcns_follow), i.e., that the FIRST cluster is covered. The walk through the further entries is not bounded against dp->lcns_follow. For a malformed LRH where target_vcn = dp->vcn + dp->lcns_follow - 1 and lrh->lcns_follow > 1, the i > 0 writes overflow the dp's allocated page_lcns[] array. Add the missing j + lrh->lcns_follow <= dp->lcns_follow guard. Reproduced under UML+KASAN on mainline 8d90b09e6741 as a slab-out-of-bounds write of size 8 from log_replay+0x68d4 on the mount path. This is distinct from Pavitra Jha's 2026-05-02 patch ("fs/ntfs3: validate lcns_follow in log_replay conversion", <[email protected]>) which addresses the separate version-0 dirty-page-table conversion path's memmove(&dp->vcn, ...) call. The two fixes are complementary; both should land. [[email protected]: clang-formatted the changes, fixed conflicts]

In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: bound DeleteIndexEntryAllocation memmove length In do_action()'s DeleteIndexEntryAllocation case, e->size comes from an on-disk INDEX_BUFFER entry. When e->size makes e + e->size point past hdr + hdr->used, PtrOffset(e1, Add2Ptr(hdr, used)) returns a negative ptrdiff_t that is silently cast to a quasi-infinite size_t when passed to memmove(). The memmove then walks past the destination buffer. The sibling DeleteIndexEntryRoot case at fslog.c:3540-3543 already carries the corresponding guard: if (PtrOffset(e1, Add2Ptr(hdr, used)) < esize || Add2Ptr(e, esize) > Add2Ptr(lrh, rec_len) || used + esize > le32_to_cpu(hdr->total)) { goto dirty_vol; } Apply the same shape to the allocation-path case. Also reject esize == 0: memmove(e, e, ...) is a no-op and leaves hdr->used unchanged, hiding a malformed entry from the existing check_index_header() walk. Reproduced under UML+KASAN on mainline 8d90b09e6741 by mounting a crafted NTFS image: the unguarded memmove takes a length of 0xffffffffffffff00 and the kernel oopses in memmove+0x81/0x1a0 on the do_action+0x36a2 frame. [[email protected]: clang-formatted the changes]

In the Linux kernel, the following vulnerability has been resolved: ntfs: centalize $INDEX_ROOT header validation Add a dedicated helper to perform stricter validation of $INDEX_ROOT and use it for both directory inodes and named index inodes. This keeps the root size and header geometry checks consistent across both read paths.

In the Linux kernel, the following vulnerability has been resolved: ntfs: validate index block header more strictly Modify ntfs_index_block_inconsisent() to perform stricter validation of INDEX_HEADER geometry in INDX blocks, and update ntfs_lookup_inode_by_name() to use that function to validate INDX blocks.

In the Linux kernel, the following vulnerability has been resolved: mm/memory_hotplug: fix incorrect altmap passing in error path In create_altmaps_and_memory_blocks(), when arch_add_memory() succeeds with memmap_on_memory enabled, the vmemmap pages are allocated from params.altmap. If create_memory_block_devices() subsequently fails, the error path calls arch_remove_memory() with a NULL altmap instead of params.altmap. This is a bug that could lead to memory corruption. Since altmap is NULL, vmemmap_free() falls back to freeing the vmemmap pages into the system buddy allocator via free_pages() instead of the altmap. arch_remove_memory() then immediately destroys the physical linear mapping for this memory. This injects unowned pages into the buddy allocator, causing machine checks or memory corruption if the system later attempts to allocate and use those freed pages. Fix this by passing params.altmap to arch_remove_memory() in the error path.

In the Linux kernel, the following vulnerability has been resolved: x86/boot: Validate console=uart8250 baud rate to fix early boot hang When the baud rate is empty, 0, invalid, or overflows to 0 when stored as an int, the system will hang during early boot because of a division by zero in early_serial_init(). Fall back to DEFAULT_BAUD when the resulting baud rate is 0 to prevent an early system hang.

In the Linux kernel, the following vulnerability has been resolved: fbdev: carminefb: fix potential memory leak in alloc_carmine_fb() The memory allocated for modelist in fb_videomode_to_modelist() is not freed in the subsequent error path. Fix that by calling fb_destroy_modelist()

In the Linux kernel, the following vulnerability has been resolved: fbdev: uvesafb: fix potential memory leak in uvesafb_probe() Due to an incorrect goto label, memory allocated for modedb and modelist in uvesafb_vbe_init() is not freed in some error paths. Fix this by updating the goto label.

In the Linux kernel, the following vulnerability has been resolved: fbdev: vesafb: fix memory leak in vesafb_probe() Since commit 73ce73c30ba9 ("fbdev: Transfer video= option strings to caller; clarify ownership") the string returned from fb_get_options() is expected to be freed by the caller. But the string is not freed in vesafb_probe(). Fix that by freeing the option string after setup.

In the Linux kernel, the following vulnerability has been resolved: fbdev: tridentfb: fix potential memory leak in trident_pci_probe() In trident_pci_probe(), the memory allocated for modelist using fb_videomode_to_modelist() is not freed in subsequent error paths. Fix that by calling fb_destroy_modelist().

In the Linux kernel, the following vulnerability has been resolved: fbdev: i740fb: fix potential memory leak in i740fb_probe() In i740fb_probe(), the memory allocated in fb_videomode_to_modelist() for modelist is not freed in the error paths. Fix that by calling fb_destroy_modelist().

In the Linux kernel, the following vulnerability has been resolved: fbdev: efifb: fix memory leak in efifb_probe() Since commit 73ce73c30ba9 ("fbdev: Transfer video= option strings to caller; clarify ownership") the string returned from fb_get_options() is expected to be freed by the caller, but the string is not freed in efifb_probe(). Fix that by freeing the option string after setup.

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: account pKVM reclaim against the VM mm Protected guest faults charge long term pins to the VM's mm. Teardown can run later from file release, where current->mm may be unrelated. Drop the charge from kvm->mm instead.

In the Linux kernel, the following vulnerability has been resolved: KVM: TDX: Reject concurrent change to CPUID entry count Reject KVM_TDX_INIT_VM if userspace changes cpuid.nent between the initial read and the subsequent copy of the initialization data. tdx_td_init() first reads user_data->cpuid.nent to size the flexible kvm_tdx_init_vm copy. The copied structure also contains cpuid.nent, and that field can differ from the value used to size the allocation if userspace modifies the input concurrently. setup_tdparams_cpuids() later passes init_vm->cpuid.nent to kvm_find_cpuid_entry2(), which uses it as the array bound for the copied entries. Require the copied count to match the value used to size the allocation so that CPUID parsing cannot access beyond the entries actually copied.

In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Nullify irqfd->producer if updating IRTE for bypass fails Nullify irqfd->producer if updating the IRTE for bypass fails, as leaving a dangling pointer will result in a use-after-free if the irqfd is reachable through KVM's routing, but the producer is freed separately. E.g. for VFIO PCI, the producer is embedded in struct "vfio_pci_irq_ctx" and freed when the vector is disabled, which can happen independent of routing updates. [sean: drop PPC change, massage changelog]

In the Linux kernel, the following vulnerability has been resolved: KVM: s390: vsie: Add missing radix_tree_preload() in _gaccess_shadow_fault() Add missing radix_tree_preload() in _gaccess_shadow_fault() to guarantee forward progress. The core of _gaccess_shadow_fault() has been split into ___gaccess_shadow_fault() in order to simplify locking.

In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Fix unlikely race in try_get_locked_pte() Fix an unlikely race in try_get_locked_pte(), which could have happened if puds or pmds get unmapped between the p?dp_get() and p?d_offset() functions.

In the Linux kernel, the following vulnerability has been resolved: net: atm: reject out-of-range traffic classes in QoS validation Reject ATM traffic classes above ATM_ANYCLASS in check_tp(). SO_ATMQOS stores the supplied QoS after check_qos() succeeds, so accepting larger values leaves invalid traffic_class values in vcc->qos. That bad state later reaches pvc_info(), which indexes class_name[] with vcc->qos.{rx,tp}.traffic_class. Values above ATM_ANYCLASS cause an out-of-bounds read when /proc/net/atm/pvc is read. Tighten the existing QoS validation so invalid traffic_class values are rejected at the point where user supplied QoS is accepted.

In the Linux kernel, the following vulnerability has been resolved: tipc: restrict socket queue dumps in enqueue tracepoints tipc_sk_enqueue() runs with sk->sk_lock.slock held while the socket is owned by user context. The spinlock protects the backlog queue in this path, but it does not serialize against the socket owner consuming or purging sk_receive_queue. KASAN reported: CPU: 14 UID: 0 PID: 1050 Comm: tipc3 Not tainted 7.1.0-rc6+ #126 PREEMPT(lazy) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x76/0xa0 lib/dump_stack.c:123 print_report+0xce/0x5b0 mm/kasan/report.c:482 kasan_report+0xc6/0x100 mm/kasan/report.c:597 __asan_report_load4_noabort+0x14/0x30 mm/kasan/report_generic.c:380 tipc_skb_dump+0x1327/0x16f0 net/tipc/trace.c:73 tipc_list_dump+0x208/0x2e0 net/tipc/trace.c:187 tipc_sk_dump+0xaf6/0xd60 net/tipc/socket.c:3996 trace_event_raw_event_tipc_sk_class+0x312/0x5a0 net/tipc/trace.h:188 tipc_sk_rcv+0xb1d/0x1d50 net/tipc/socket.c:2497 tipc_node_xmit+0x1c3/0x1440 net/tipc/node.c:1689 __tipc_sendmsg+0x97a/0x1440 net/tipc/socket.c:1512 tipc_sendmsg+0x52/0x80 net/tipc/socket.c:1400 sock_sendmsg+0x2f6/0x3e0 net/socket.c:825 splice_to_socket+0x7f9/0x1010 fs/splice.c:884 do_splice+0xe21/0x2330 fs/splice.c:936 __do_splice+0x153/0x260 fs/splice.c:1431 __x64_sys_splice+0x150/0x230 fs/splice.c:1616 x64_sys_call+0xeb5/0x2790 arch/x86/entry/syscall_64.c:41 do_syscall_64+0xf3/0x620 arch/x86/entry/syscall_64.c:63 entry_SYSCALL_64_after_hwframe+0x76/0x7e arch/x86/entry/entry_64.S:130 RIP: 0033:0x71624e8aafe2 Code: 08 0f 85 71 3a ff ff 49 89 fb 48 89 f0 48 89 d7 48 89 ce 4c 89 c2 4d 89 ca 4c 8b 44 24 08 4c 8b 4c 24 10 4c 89 5c 24 08 0f 05 <c3> 66 2e 0f 1f 84 00 00 00 00 00 66 2e 0f 1f 84 00 00 00 00 00 66 RSP: 002b:0000716157ffed68 EFLAGS: 00000246 ORIG_RAX: 0000000000000113 RAX: ffffffffffffffda RBX: 0000716157fff6c0 RCX: 000071624e8aafe2 RDX: 000000000000005f RSI: 0000000000000000 RDI: 0000000000000066 RBP: 0000716157ffed90 R08: 0000000000008000 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000246 R12: ffffffffffffff00 R13: 0000000000000021 R14: 0000000000000000 R15: 00007fff89799c40 </TASK> The TIPC_DUMP_ALL tracepoints in tipc_sk_enqueue() also dump sk_receive_queue and can therefore dereference skbs that the socket owner has already dequeued or freed. Restrict these dumps to TIPC_DUMP_SK_BKLGQ, which matches the queue protected by the held spinlock. Keep the change limited to the enqueue path, where the unsafe queue dump is reachable while the socket is owned by user context.

In the Linux kernel, the following vulnerability has been resolved: tracing/remotes: Fix leak in trace_remote_alloc_buffer() error path If page allocation fails in trace_remote_alloc_buffer(), desc->nr_cpus is not yet incremented for the current CPU. As a consequence, on error, half-allocated rb_desc will not be freed in trace_remote_free_buffer(). Increment desc->nr_cpus as soon as the first allocation for the current CPU has succeeded.

In the Linux kernel, the following vulnerability has been resolved: drm/xe: free madvise VMA array on L2 flush failure xe_vm_madvise_ioctl() allocates madvise_range.vmas in get_vmas(). After get_vmas() succeeds with at least one VMA, error paths must go through free_vmas so the array is released before the madvise details are destroyed. The L2 flush validation path added for PAT madvise rejects some SVM/userptr ranges after get_vmas() has succeeded, but jumps directly to madv_fini. This skips kfree(madvise_range.vmas), leaking the VMA array on each failed ioctl. Jump to free_vmas instead, matching the other validation failure paths after get_vmas() has succeeded. (cherry picked from commit c3a1c3579b1250060da73507a4acef712974c78a)

In the Linux kernel, the following vulnerability has been resolved: smb: client: fix busy dentry warning on unmount after DIO Commit c68337442f03 ("cifs: Fix busy dentry used after unmounting") fixed the issue in cifs where deferred close of a file led to a dentry reference count not being released in umount, by flushing deferredclose_wq in cifs_kill_sb() to solve it. However, the cifs DIO path suffers from the same busy-dentry problem caused by a delayed dentry reference-count release: [dio] [cifsd] [close + umount] netfs_unbuffered_write_iter_locked ... cifs_demultiplex_thread netfs_unbuffered_write cifs_issue_write netfs_wait_for_in_progress_stream [1] ... netfs_write_subrequest_terminated netfs_subreq_clear_in_progress netfs_wake_collector // wake [1] netfs_put_subrequest netfs_put_request queue_work(system_dfl_wq, xxx) [2] // dio write return cifs_close _cifsFileInfo_put // cfile->count 2->1 --cfile->count [3] // umount cifs_kill_sb kill_anon_super // warning triggered! shrink_dcache_for_umount [4] [system_dfl_wq] [5] netfs_free_request ... _cifsFileInfo_put // cfile->count 1->0 --cfile->count queue_work(fileinfo_put_wq, xxx) [fileinfo_put_wq] [6] cifsFileInfo_put_work cifsFileInfo_put_final dput If the umount path is triggered before [5], it results warning: BUG: Dentry 00000000eab1f070{i=9a917b66ae404fec,n=test} still in use (1) [unmount of cifs cifs] The existing per-inode ictx->io_count wait in cifs_evict_inode() does not help: it lives in the inode eviction path, which runs after shrink_dcache_for_umount() has already warned about the busy dentries. Fix it by adding a per-superblock outstanding-rreq counter that is incremented in cifs_init_request() and decremented in cifs_free_request(). In cifs_kill_sb(), before kill_anon_super(), wait for this counter to reach 0 - which guarantees that all cleanup_work for this sb have run and thus all relevant cfile puts are queued on fileinfo_put_wq or serverclose_wq. Then drain the workqueue so the dentry refs are dropped. This is a targeted wait, not a flush of the system-wide system_dfl_wq.

In the Linux kernel, the following vulnerability has been resolved: SUNRPC: pin upper rpc_clnt across the TLS connect_worker The TLS connect path has a use-after-free: nothing pins the upper rpc_clnt across the delayed connect_worker. xs_connect() stores task->tk_client in sock_xprt::clnt as a raw pointer and queues the worker; for TLS-secured transports that worker is xs_tcp_tls_setup_socket(), which reads several fields out of the saved pointer (cl_timeout, cl_program, cl_prog, cl_vers, cl_cred, cl_stats) to construct the args for the inner handshake rpc_clnt. The xprt does not reference the rpc_clnt; the rpc_clnt references the xprt. xs_destroy() does cancel the connect_worker, but it runs only when the xprt's refcount drops to zero, which cannot happen until the rpc_clnt releases its cl_xprt reference in rpc_free_client_work(). When a TLS handshake fails fatally (for example, an mTLS mount whose client cert does not match the server), the connecting task is woken with -EACCES and exits, the mount caller invokes rpc_shutdown_client(), and the upper rpc_clnt is freed before the queued connect_worker fires. xs_tcp_tls_setup_socket() then dereferences the freed clnt, producing the refcount_t underflow Michael Nemanov reported. Take a reference on the upper rpc_clnt in xs_connect() for TLS transports via a new rpc_hold_client() helper, and drop it in the connect_worker's exit path with rpc_release_client(). The xprt_lock_connect() / xprt_unlock_connect() pairing already serialises xs_connect() with xs_tcp_tls_setup_socket(), so the take and release are balanced one-for-one. The non-TLS connect worker (xs_tcp_setup_socket) never reads sock_xprt::clnt, so leave that path alone and avoid the clnt-holds-xprt-holds-clnt cycle that would otherwise prevent xprt destruction.

In the Linux kernel, the following vulnerability has been resolved: perf/x86/amd/core: Avoid enabling BRS from the SVM reload path Branch Sampling (BRS) and Last Branch Record (LBR) are mutually exclusive hardware features, and users of both are tracked via cpuc->lbr_users. When SVM is toggled on a CPU, the host perf events are reprogrammed to update the HostOnly filter bit (set when virtualization is enabled, cleared when it is disabled). On PerfMonV2-capable processors, this reprogramming is performed by calling amd_pmu_enable_all() to rewrite the event selectors. However, amd_pmu_enable_all() also calls amd_brs_enable_all(), which enables BRS whenever cpuc->lbr_users > 0. Having active LBR events satisfies this gating on processors that have LBR but not BRS. The kernel then tries to set the BRS enable bit in DebugExtnCfg (MSR 0xc000010f). Since that bit is deprecated on such hardware, the write results in a #GP: Call Trace: <IRQ> amd_pmu_enable_all+0x1d/0x90 amd_pmu_disable_virt+0x62/0xb0 kvm_arch_disable_virtualization_cpu+0xa/0x40 [kvm] hardware_disable_nolock+0x1a/0x30 [kvm] __flush_smp_call_function_queue+0x9b/0x410 __sysvec_call_function+0x18/0xc0 sysvec_call_function+0x69/0x90 </IRQ> <TASK> asm_sysvec_call_function+0x16/0x20 RIP: 0010:cpuidle_enter_state+0xc4/0x450 ? cpuidle_enter_state+0xb7/0x450 cpuidle_enter+0x29/0x40 cpuidle_idle_call+0xf5/0x160 do_idle+0x7b/0xe0 cpu_startup_entry+0x26/0x30 start_secondary+0x115/0x140 secondary_startup_64_no_verify+0x194/0x19b </TASK> Fix this by ensuring that BRS is not enabled from the event selector reprogramming path even when cpuc->lbr_users > 0.

In the Linux kernel, the following vulnerability has been resolved: net/sched: cake: reject overhead values that underflow length CAKE accepts signed overhead values and stores them in an s16, but the adjusted packet length calculation uses unsigned arithmetic. A negative effective length can therefore wrap to a large value. Such configurations make rate accounting depend on integer wraparound rather than on the packet size userspace intended to model. A static netlink lower bound is not enough because packets reaching CAKE can be smaller than any reasonable manual-overhead allowance. Fold the signed overhead adjustment into the existing datapath MPU clamp so negative adjusted lengths are clamped before link-layer framing adjustments.

In the Linux kernel, the following vulnerability has been resolved: ipv4: igmp: Fix potential UAF in igmp_gq_start_timer() A race condition exists between device teardown (inetdev_destroy) and incoming IGMP query processing (igmp_rcv), leading to a Use-After-Free in the IGMP timer callback. During device destruction, inetdev_destroy() drops the primary reference to in_device, which can drop its refcount to 0. The actual freeing of in_device memory is deferred via RCU (using call_rcu()). Concurrently, igmp_rcv() runs under RCU read lock and obtains the in_device pointer. Because the memory is RCU-protected, CPU-0 can safely dereference in_device even if its refcount has hit 0. However, if CPU-0 calls igmp_gq_start_timer() and re-arms the timer, it attempts to acquire a reference using in_dev_hold(). This increments the refcount from 0 to 1, triggering a "refcount_t: addition on 0" warning. Since the in_device memory is still scheduled to be freed after the RCU grace period (as the free callback does not check the refcount again), the device is freed while the timer is still armed. When the timer expires, it accesses the freed memory, causing a kernel panic. Fix this by using refcount_inc_not_zero() (via a new helper in_dev_hold_safe()) to prevent acquiring a reference if the device is already being destroyed. If the refcount is 0, we do not arm the timer. A similar issue in IPv6 MLD is fixed in a subsequent patch.

In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix VMA access race aie2_populate_range() and amdxdna_umap_release() access a saved VMA pointer that may have already been freed, leading to a potential use-after-free. Remove the VMA accesses from these functions to avoid the race.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: fix malformed ISO_END/CONT handling Core specification (Part C vol 4 sec 5.4.5) does not exclude empty ISO_CONT, ISO_END packets. We currently reject them if they are last. If controller sends malformed sequence ISO_START -> rx_len = 4, ISO_CONT skb->len 4, ISO_START that ends payload in ISO_CONT, we leak conn->rx_skb. If controller sends too long ISO_END, we panic on skb_put. If controller sends too short ISO_END we accept it. Fix by marking unfinished ISO_START via conn->rx_skb != NULL. Check skb->len properly before skb_put. Combine the ISO_CONT/END code paths as they require the same initial checks. Reject too short ISO_END packets.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix adv monitor add failure cleanup hci_add_adv_monitor() publishes a new adv_monitor in hdev->adv_monitors_idr before the powered MSFT setup step. The MSFT offload add path can then fail either locally before the controller add command completes, or in the MSFT add callback. In the current queued management add flow, hci_cmd_sync_work() still invokes mgmt_add_adv_patterns_monitor_complete() with the original pending command after msft_add_monitor_pattern() returns. The buggy scenario involves two paths, with each column showing the order within that path: MSFT add handling MGMT completion 1. insert monitor and handle 1. receive sync error 2. send MSFT add command 2. call add-monitor completion 3. callback sees bad response 3. load cmd->user_data 4. callback frees monitor 4. read monitor->handle Local MSFT setup failures have the other half of the same ownership bug: they return an error after the IDR insertion, but no later code removes the failed monitor from the IDR. Keep ownership with the pending management command until its completion. For normal management adds, the MSFT add callback now records successful controller state and returns errors to its caller. The management completion frees the monitor on non-success after copying the response handle, while resume/reregister callback-error cleanup remains in the MSFT callback. The success path keeps the existing bookkeeping. Validation reproduced this kernel report: BUG: KASAN: slab-use-after-free in mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth] Call Trace: <TASK> dump_stack_lvl+0x66/0xa0 print_report+0xce/0x5f0 ? mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth] ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x19f/0x330 ? mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth] kasan_report+0xe0/0x110 ? mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth] mgmt_add_adv_patterns_monitor_complete+0xfb/0x260 [bluetooth] ? srso_alias_return_thunk+0x5/0xfbef5 ? 0xffffffffc00d00da ? __pfx_mgmt_add_adv_patterns_monitor_complete+0x10/0x10 [bluetooth] ? __pfx_mgmt_add_adv_patterns_monitor_complete+0x10/0x10 [bluetooth] ? hci_cmd_sync_work+0x1ab/0x210 [bluetooth] hci_cmd_sync_work+0x1c0/0x210 [bluetooth] ? __pfx_mgmt_add_adv_patterns_monitor_complete+0x10/0x10 [bluetooth] process_one_work+0x4fd/0xbc0 ? __pfx_process_one_work+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? __list_add_valid_or_report+0x37/0xf0 ? __pfx_hci_cmd_sync_work+0x10/0x10 [bluetooth] ? srso_alias_return_thunk+0x5/0xfbef5 worker_thread+0x2d8/0x570 ? __pfx_worker_thread+0x10/0x10 kthread+0x1ad/0x1f0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x3c9/0x540 ? __pfx_ret_from_fork+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __switch_to+0x2e9/0x730 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 471 on cpu 3 at 285.205389s: kasan_save_stack+0x33/0x60 kasan_save_track+0x17/0x60 __kasan_kmalloc+0xaa/0xb0 add_adv_patterns_monitor_rssi+0xd5/0x230 [bluetooth] hci_sock_sendmsg+0x96b/0xf80 [bluetooth] __sys_sendto+0x2bc/0x2d0 __x64_sys_sendto+0x76/0x90 do_syscall_64+0x115/0x6a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 454 on cpu 2 at 285.217112s: kasan_save_stack+0x33/0x60 kasan_save_track+0x17/0x60 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x5f/0x80 kfree+0x313/0x590 msft_add_monitor_sync+0x54a/0x570 [bluetooth] hci_add_adv_monitor+0x133/0x180 [bluetooth] hci_cmd_sync_work+0x187/0x210 [bluetooth] process_one_work+0x4fd/0xbc0 worker_thread+0x2d8/0x570 kthread+0x1ad/0x1f0 ret_from_fork+0x3c9/0x540 ret_from_fork_asm+0x1a/0x30

In the Linux kernel, the following vulnerability has been resolved: uprobes/x86: Use proper mm_struct in __in_uprobe_trampoline In the unregister path we use __in_uprobe_trampoline check with current->mm for the VMA lookup, which is wrong, because we are in the tracer context, not the traced process. Add mm_struct pointer argument to __in_uprobe_trampoline and changing related callers to pass proper mm_struct pointer.

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix folio state after ENOMEM whilst under writeback iteration Fix the state of the current folio when ENOMEM occurs during writeback iteration. The folio needs to be redirtied and unlocked before the terminal writeback_iter() is invoked.

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix writethrough to use collection offload Fix writethrough write to set NETFS_RREQ_OFFLOAD_COLLECTION on the request so that collection is processed asynchronously rather than only right at the end - and also so that asynchronous O_SYNC writes get collected at all.

In the Linux kernel, the following vulnerability has been resolved: afs: Fix reinitialisation of the inode, in particular ->lock_work It seems that initalising afs_vnode::lock_work a single time in the slab's init function isn't sufficient for work_structs. This results in the DEBUG_OBJECTS debugging stuff producing a warning occasionally when running the generic/131 xfstest: ODEBUG: activate not available (active state 0) object: 0000000016d8760f object type: work_struct hint: afs_lock_work+0x0/0x220 WARNING: lib/debugobjects.c:629 at debug_print_object+0x4b/0x90, CPU#3: locktest/7695 ... CPU: 3 UID: 0 PID: 7695 Comm: locktest Tainted: G S 7.1.0-build3+ #2771 PREEMPT ... RIP: 0010:debug_print_object+0x65/0x90 ... Call Trace: <TASK> ? __pfx_afs_lock_work+0x10/0x10 debug_object_activate+0x122/0x170 insert_work+0x25/0x60 __queue_work+0x2e0/0x340 queue_delayed_work_on+0x48/0x70 afs_fl_release_private+0x57/0x70 locks_release_private+0x5c/0xa0 locks_free_lock+0xe/0x20 posix_lock_inode+0x55f/0x5b0 locks_lock_inode_wait+0x81/0x140 ? file_write_and_wait_range+0x50/0x70 afs_lock+0xcd/0x110 fcntl_setlk+0x10d/0x260 do_fcntl+0x24e/0x5b0 __do_sys_fcntl+0x6a/0x90 do_syscall_64+0x11e/0x310 entry_SYSCALL_64_after_hwframe+0x71/0x79 Fix this by reinitialising ->lock_work after allocating an inode. Also, flush ->lock_work when the inode is being evicted to make sure it's not still running.

In the Linux kernel, the following vulnerability has been resolved: afs: Remove setting of AS_RELEASE_ALWAYS for symlinks and mountpoints Regular AFS files correctly use afs_file_aops which have release_folio set as netfs_release_folio, so AS_RELEASE_ALWAYS is valid for them when fscache is enabled (set via afs_vnode_set_cache()). Symlinks and mountpoints in AFS use afs_dir_aops, which does not provide a release_folio callback. However, afs_apply_status() unconditionally calls mapping_set_release_always() for these. In such case when memory management code attempts to release folios, filemap_release_folio() checks folio_needs_release() which returns true due to AS_RELEASE_ALWAYS being set. Since there is no release_folio callback, it falls through to try_to_free_buffers(), which at present expects buffer_heads to be not null. For symlinks and mountpoints without buffer_heads, this causes pointer dereference. [dh: Added more bits that were missed]

In the Linux kernel, the following vulnerability has been resolved: fs: refuse O_TMPFILE creation with an unmapped fsuid or fsgid vfs_tmpfile() never checked that the caller's fsuid and fsgid map into the filesystem. On an idmapped mount whose idmapping does not cover the caller's fs{u,g}id, the ->tmpfile() instance initializes the new inode through inode_init_owner(), where mapped_fsuid()/mapped_fsgid() return INVALID_UID/INVALID_GID, and the tmpfile ends up owned by (uid_t)-1. Every other creation path already refuses this: may_o_create() (O_CREAT) and may_create_dentry() (mkdir, mknod, symlink, link) bail out with -EOVERFLOW via fsuidgid_has_mapping() precisely so that an object cannot be created with an owner the filesystem cannot represent. An O_TMPFILE is no exception: it is created I_LINKABLE and linkat(2) can splice it into the namespace afterwards, so the same guarantee must hold. Add the missing fsuidgid_has_mapping() check to vfs_tmpfile(). On a non-idmapped mount the caller's fs{u,g}id always map in the superblock's user namespace, so this is a no-op there and only takes effect on an idmapped mount that does not map the caller. It applies to every filesystem that sets FS_ALLOW_IDMAP and implements ->tmpfile() (tmpfs, ext4, btrfs, xfs, f2fs, ...), and to overlayfs, whose upper-layer tmpfile creation funnels through vfs_tmpfile() via backing_tmpfile_open().

In the Linux kernel, the following vulnerability has been resolved: tracing/fprobe: Fix NULL pointer dereference in fprobe_fgraph_entry() fprobe_fgraph_entry() sizes a shadow-stack reservation in one walk of the per-ip fprobe list and fills it in a second walk, both under rcu_read_lock() only. A fprobe registered on an already-live ip can become visible between the two walks, so the fill walk processes an exit_handler the sizing walk did not count and used runs past reserved_words. If the sizing walk counted nothing, fgraph_data is NULL and the first write_fprobe_header() faults: Oops: general protection fault, probably for non-canonical address ... KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] RIP: 0010:fprobe_fgraph_entry+0xa38/0xf10 kernel/trace/fprobe.c:167 Call Trace: <TASK> function_graph_enter_regs+0x44c/0xa10 kernel/trace/fgraph.c:677 ftrace_graph_func+0xc5/0x140 arch/x86/kernel/ftrace.c:671 __kernel_text_address+0x9/0x40 kernel/extable.c:78 arch_stack_walk+0x117/0x170 arch/x86/kernel/stacktrace.c:26 kmem_cache_free+0x188/0x580 mm/slub.c:6378 tcp_data_queue+0x18d/0x6550 net/ipv4/tcp_input.c:5590 [...] </TASK> The list cannot be frozen across the two walks, so skip a node that does not fit the reservation and count it as missed.