CVE Feed

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: lock sk in iso_connect_ind Accessing iso_pi(sk)->conn requires lock_sock, which is not taken in the "ev3" part of iso_connect_ind. It may also be NULL if socket has transitioned away from the LISTEN/CONNECT states before locking. Fix by adding lock/release. Recheck hcon is valid after lock acquire where needed.

In the Linux kernel, the following vulnerability has been resolved: hwmon: (nct6775-core) Fix number of temperature registers for NCT6116 Unlike NCT6106, NCT6116 only has three temperature registers, and with it only three temperature source and temperature source configuration registers. The register addresses match those of NCT6106 and can be re-used. The code used a separate array to list the temperature source registers for NCT6116, but used the size of the NCT6106 register array to set the number of registers. The NCT6106 register array provides six addresses, while the temperature source register array for NCT6116 only provides three addresses. This causes a KASAN report. BUG: KASAN: global-out-of-bounds in nct6775_probe+0x936/0x46f0 [nct6775] Read of size 2 at addr ffffffffc19561a6 by task modprobe/954 ... Call Trace: dump_stack+0x7d/0xa7 print_address_description.constprop.0+0x1c/0x220 ? __kasan_kmalloc.constprop.0+0xc9/0xd0 ? __kmalloc_node_track_caller+0x194/0x5b0 ? nct6775_probe+0x936/0x46f0 [nct6775] ? nct6775_probe+0x936/0x46f0 [nct6775] ... Fix the problem by hard-coding the number of temperature and temperature configuration registers to three for NCT6116. Drop the unnecessary NCT6116_REG_TEMP_SOURCE array and re-use NCT6106_REG_TEMP_SOURCE.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: make nft_object rhltable per table The nft_object rhltable is global, this allows for accessing objects that are being dismangled from lookup path by other existing netns. Given the nft_obj_destroy() releases the object inmediately, this might lead to use-after-free of these objects that are being released. Make the existing rhltable per table to address this issue to deal with with the nft_rcv_nl_event() path too. Update nft_obj_lookup() to take the table as non-const, otherwise, compiler complains when passing the objname_ht to rhltable_lookup().

In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu-v3-iommufd: Require exactly one Stream ID for a vDEVICE arm_vsmmu_vsid_to_sid() maps a guest's vSID to a single physical Stream ID taken from master->streams[0], assuming a device has exactly one stream. A device with several streams gets only its first one mapped, so a guest vSID invalidation cannot reach the others' ATC and IOTLB entries; a device with none makes master->streams a ZERO_SIZE_PTR, read out of bounds. Add an arm_vsmmu_vdevice_init() op to reject the vDEVICE with -EOPNOTSUPP when master->num_streams is not one, rather than mapping it silently.

In the Linux kernel, the following vulnerability has been resolved: net: mpls: initialize rtm_tos in mpls_getroute() mpls_getroute() builds the RTM_NEWROUTE reply to an RTM_GETROUTE request by filling a struct rtmsg allocated from an skb whose data area is not zeroed (alloc_skb(NLMSG_GOODSIZE, ...)). It sets every field of the header except rtm_tos: r = nlmsg_data(nlh); r->rtm_family = AF_MPLS; r->rtm_dst_len = 20; r->rtm_src_len = 0; r->rtm_table = RT_TABLE_MAIN; r->rtm_type = RTN_UNICAST; r->rtm_scope = RT_SCOPE_UNIVERSE; r->rtm_protocol = rt->rt_protocol; r->rtm_flags = 0; struct rtmsg has no padding, so the one uninitialised byte rtm_tos (offset 3) is copied straight to user space on recvmsg(), leaking a byte of uninitialised heap memory. This is in contrast to mpls_dump_route(), which fills the very same header and does set rtm_tos = 0. Initialize rtm_tos to 0, matching mpls_dump_route(). Reproduced with KMSAN by adding an MPLS route and issuing a non-RTM_F_FIB_MATCH RTM_GETROUTE for its label: BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x36c/0x33f0 _copy_to_iter+0x36c/0x33f0 __skb_datagram_iter+0x196/0x12c0 skb_copy_datagram_iter+0x5b/0x210 netlink_recvmsg+0x37b/0xef0 ... Uninit was created at: __alloc_skb+0x8ca/0x10e0 mpls_getroute+0x1280/0x3a40 rtnetlink_rcv_msg+0x1138/0x15a0 ... Byte 19 of 64 is uninitialized (byte 19 = nlmsghdr(16) + rtmsg offset 3 = rtm_tos)

In the Linux kernel, the following vulnerability has been resolved: can: bcm: fix stale rx/tx ops after device removal RX: an RX_SETUP update(!) for an existing op skipped can_rx_register() unconditionally, even when a concurrent NETDEV_UNREGISTER had already torn down its registration (op->rx_reg_dev == NULL). This silently did not re-enable frame delivery for that updated filter. bcm_rx_setup() now re-registers in that case, while leaving rx_ops with ifindex = 0 (all CAN devices) which never carry a tracked rx_reg_dev registered as-is. TX: bcm_notify() only handled bo->rx_ops on NETDEV_UNREGISTER, leaving tx_ops with an active cyclic transmission re-arming its hrtimer indefinitely to execute bcm_tx_timeout_handler(). Cancelling the hrtimer prevents the runaway timer and any injection into a later reused ifindex, since nothing else calls bcm_can_tx() for the op until an explicit TX_SETUP update re-arms it. Unlike bcm_rx_unreg(), which clears the tracked rx_reg_dev for rx_ops, the ifindex is intentionally left unchanged for tx_ops. bcm_tx_setup() always rejects ifindex 0, so clearing it would strand the op: neither a later TX_SETUP (bcm_find_op()) nor TX_DELETE (bcm_delete_tx_op()) could ever find it again, since both require an exact ifindex match.

In the Linux kernel, the following vulnerability has been resolved: nvmet-rdma: handle inline data with a nonzero offset nvmet_rdma_use_inline_sg() maps the host-controlled inline data offset into the per-command inline scatterlist. The bounds check admits any offset with off + len <= inline_data_size, but the mapping still assumes the data begins in the first inline page: sg->offset = off; sg->length = min_t(int, len, PAGE_SIZE - off); When a port is configured with inline_data_size > PAGE_SIZE (settable up to max(SZ_16K, PAGE_SIZE)), an offset in (PAGE_SIZE, inline_data_size] makes "PAGE_SIZE - off" underflow, so sg->length is set to ~4 GiB and the block backend reads far past the first inline page. num_pages(len) also ignores the offset, so an in-bounds offset whose [off, off+len) span crosses a page boundary under-counts the scatterlist. Map the offset properly: split it into a page index and an in-page offset, start the scatterlist at that page, and size the page count from page_off + len. Because the request scatterlist may now start at inline_sg[page_idx] rather than inline_sg[0], generalize the inline-SGL identity test in nvmet_rdma_release_rsp() to a range test; otherwise the persistent inline scatterlist is mistaken for an allocated one and nvmet_req_free_sgls() frees an inline page (and warns in free_large_kmalloc()).

In the Linux kernel, the following vulnerability has been resolved: mtd: maps: vmu-flash: fix fault in unaligned fixup Use kzalloc_obj() / kzalloc_objs() to allocate the memcard structs, instead of kmalloc_obj() / kmalloc_objs() to prevent access to uninitialized data. Fixes runtime error: Fault in unaligned fixup: 0000 [#1] at mtd_get_fact_prot_info.

In the Linux kernel, the following vulnerability has been resolved: fs/proc/task_mmu: do not warn on seeing non-migration pmd entry Patch series "mm/hmm: A fix and a selftest", v3. Patch 1 fixes a stale warning present from the time when only migration softleaf entries were supported at the PMD level. Patch 2 adds some code into hmm-tests.c which exercises the pagemap path for PMD device-private entries. This patch (of 2): pagemap_pmd_range_thp() warns if a non-present PMD is not a migration entry. This became false once device-private entries at the PMD level were added. Therefore, remove the stale migration-only assertion.

In the Linux kernel, the following vulnerability has been resolved: ntfs3: cap RESTART_TABLE free-chain walker at rt->used A crafted NTFS3 disk image triggers an in-kernel infinite loop at mount time, hanging the mounting thread and firing the soft-lockup watchdog within ~22s on multi-CPU hosts (panic with kernel.softlockup_panic=1). The bug is reachable from desktop USB auto-mount on distributions where udisks2 routes the NTFS signature to the in-tree ntfs3 driver (Arch family and an increasing fraction of Fedora / openSUSE / RHEL deployments); CAP_SYS_ADMIN-class manual mount elsewhere. check_rstbl()'s second walker iterates the free-entry singly-linked list headed by rt->first_free with no upper bound on iteration count: for (off = ff; off;) { if (off == RESTART_ENTRY_ALLOCATED) return false; off = le32_to_cpu(*(__le32 *)Add2Ptr(rt, off)); if (off > ts - sizeof(__le32)) return false; } The existing guards cover three exits: end-of-list (off == 0), the in-use marker (off == RESTART_ENTRY_ALLOCATED), and out-of-bounds (off > ts - sizeof(__le32)). None of the three prevents an in-bounds cycle. A crafted on-disk RESTART_TABLE whose free chain contains a self-loop or A->B->A cycle whose offsets satisfy: - in range [sizeof(struct RESTART_TABLE), ts - sizeof(__le32)] - (off - sizeof(struct RESTART_TABLE)) % rsize == 0 passes all existing guards and spins the mount-time thread forever. Reproduced in UML by hand-forging a 2 MB NTFS3 image whose journal RESTART_TABLE first_free = 0x18 and whose entry at offset 0x18 stores 0x18 as its next pointer; mount of the forged image with the in-tree ntfs3 driver never returns. Bound the walker by rt->used. Each entry on a legitimate free chain is unique, and the total slot count is ne = le16_to_cpu (rt->used). A traversal that visits more than ne slots is by construction malformed; reject it as a corrupt RESTART_TABLE. After this patch, mount of the forged image returns with -EINVAL and a log_replay failure message, and mkntfs-produced legitimate images mount cleanly (verified in the same UML harness).

In the Linux kernel, the following vulnerability has been resolved: ntfs: fix mrec_lock ABBA deadlock in rename ntfs_file_fsync(), ntfs_dir_fsync() and __ntfs_write_inode() lock an inode's mrec_lock before taking the mrec_lock of its parent directory. ntfs_rename() takes old_ni->mrec_lock and old_dir_ni->mrec_lock before taking new_ni->mrec_lock for an existing target, or new_dir_ni->mrec_lock for a cross-directory rename. This can deadlock when ntfs_file_fsync() or __ntfs_write_inode() holds the target inode, or when ntfs_dir_fsync() holds a child target directory, while rename() holds the parent directory and waits for the target. Fix this by locking the existing target inode before taking any parent directory mrec_lock. For cross-directory renames where the target parent is a descendant of the source parent, lock the target parent before the source parent so the directory order matches the child-to-parent order used by ntfs_file_fsync(), ntfs_dir_fsync(), and __ntfs_write_inode().

In the Linux kernel, the following vulnerability has been resolved: xprtrdma: Check frwr_wp_create() during connect frwr_wp_create() creates the singleton Memory Region used to encode padding for Write chunks whose payload length is not XDR-aligned. Its failure paths return a negative errno and leave ep->re_write_pad_mr set to NULL. rpcrdma_xprt_connect() currently ignores that return value. If frwr_wp_create() fails after the rest of the connection setup succeeds, xprt_rdma_connect_worker() treats the connection attempt as successful and sets XPRT_CONNECTED. A later NFS/RDMA read with a non-4-byte-aligned receive page length reaches rpcrdma_encode_write_list(), passes the NULL write-pad MR to encode_rdma_segment(), and dereferences it. This is locally triggerable on an NFS/RDMA client after a connect or reconnect hits a local MR allocation, DMA-map, MR-map, or post-send failure; a remote peer alone cannot force the local MR setup failure. Check the return value and fail the connect as -ENOTCONN, matching the adjacent setup failures. This keeps XPRT_CONNECTED clear and lets the normal reconnect path retry.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: Fix possible use after free In dma_release_channel(), check chan->device->privatecnt after call dma_chan_put(). However, dma_chan_put() call dma_device_put() which could release the last reference of the device if the DMA provider is already gone and hence free it. Fixes it by moving dma_chan_put() after the check.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: dma-axi-dmac: use DMA pool to manange DMA descriptor For architectures like Microblaze or arm64 (where this IP is used), DMA_DIRECT_REMAP is set which means that dma_alloc_coherent() might remap (and hence vmalloc()) some memory. This became visible in a design where dma_direct_use_pool() is not possible. With the above, when calling dma_free_coherent(), vunmap() would be called from softirq context and thus leading to a BUG(). To fix it, use a dma pool that is allocated in .device_alloc_chan_resources() and allocate blocks from it. The key point is that now dma_pool_free() is used in axi_dmac_free_desc() to free the blocks and that just frees the blocks from the pool in the sense they can be used again. In other words, no actual call to dma_free_coherent() happens. That only happens when destroying the pool in axi_dmac_free_chan_resources() which does not happen in any interrupt context.

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free in same_client_has_lease() same_client_has_lease() returns an opinfo pointer from ci->m_op_list after dropping ci->m_lock without taking a reference. smb_grant_oplock() then dereferences that pointer in copy_lease() and when checking breaking_cnt. A concurrent close can remove the old lease from ci->m_op_list and drop the last reference before the caller uses the returned pointer, leading to a use-after-free. Take a reference when same_client_has_lease() selects an existing lease, drop any previous match while scanning, and release the returned reference in smb_grant_oplock() after copying the lease state.

In the Linux kernel, the following vulnerability has been resolved: iio: accel: mma8452: handle I2C read error(s) in mma8452_read() Currently, If i2c_smbus_read_i2c_block_data() fails but mma8452_set_runtime_pm_state() succeeds, mma8452_read() returns 0. As a result, the caller mma8452_read_raw() assumes the read was successful and proceeds to use a buffer containing uninitialized stack memory. Add proper checking of the I2C read return value and propagate errors to the caller.

In the Linux kernel, the following vulnerability has been resolved: mailbox: mtk-adsp: fix UAF during device teardown When the SOF audio driver fails to initialize (e.g. firmware boot timeout), its devres unwind frees the snd_sof_dev object that the mailbox client (mtk-adsp-ipc) reaches via chan->cl->rx_callback. The mtk-adsp-mailbox shutdown clears the mailbox command registers but leaves the IRQ line unmasked, so a late interrupt can still queue a threaded handler after mbox_free_channel() had cleared chan->cl, and mbox_chan_received_data() would then trigger UAF: BUG: KASAN: slab-use-after-free in sof_ipc3_validate_fw_version sof_ipc3_validate_fw_version sof_ipc3_do_rx_work sof_ipc3_rx_msg mt8196_dsp_handle_request mtk_adsp_ipc_recv mbox_chan_received_data mtk_adsp_mbox_isr irq_thread_fn Freed by task ...: kfree devres_release_all really_probe ... (sof-audio-of-mt8196 probe failure) The crash was observed roughly three seconds after the failed probe. disable_irq() in shutdown and enable_irq() in startup. disable_irq() also waits for any in-flight interrupts, so by the time mbox_free_channel() proceeds to clear chan->cl no rx_callback can run. In addition, request the IRQ with IRQF_NO_AUTOEN so it stays masked between probe and the first client bind — otherwise an early interrupt can crash on chan->cl == NULL in mbox_chan_received_data().

In the Linux kernel, the following vulnerability has been resolved: staging: most: video: avoid double free on video register failure comp_register_videodev() allocates a video_device with video_device_alloc() and releases it if video_register_device() fails. This can double free the video_device when __video_register_device() reaches device_register() and that call fails: video_register_device() -> __video_register_device() -> device_register() fails -> put_device(&vdev->dev) -> v4l2_device_release() -> vdev->release(vdev) -> video_device_release(vdev) comp_register_videodev() -> video_device_release(mdev->vdev) Use video_device_release_empty() while registering the device so that registration failure paths do not free mdev->vdev through vdev->release(). comp_register_videodev() then releases mdev->vdev exactly once on failure. Restore video_device_release() after successful registration so the registered device keeps its normal lifetime handling. This issue was found by a static analysis tool I am developing.

In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix stainfo check in rtw_aes_decrypt The null-pointer-guard was incorrect, returning _FAIL on valid pointer. Invert the guard, so it returns _FAIL on invalid pointer.

In the Linux kernel, the following vulnerability has been resolved: staging: nvec: fix use-after-free in nvec_rx_completed() In nvec_rx_completed(), when an incomplete RX transfer is detected, nvec_msg_free() is called to return the message back to the pool by clearing its 'used' atomic flag. Immediately after this, the code accesses nvec->rx->data[0] to check the message type. Since nvec_msg_free() marks the pool slot as available via atomic_set(), any concurrent or subsequent call to nvec_msg_alloc() could claim that same slot and overwrite its data[] array. Reading nvec->rx->data[0] after freeing the message is therefore a use-after-free. Fix this by saving the message type byte before calling nvec_msg_free(), then using the saved value for the battery quirk check.

In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Avoid displaying the kernel pointer While dumping the info on MR using the rdma tool, we dump the mr_hwq which is a kernel pointer. There is no need to expose this value for end user. So avoid it.

In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Free SRQ toggle page after firmware teardown Free the toggle page only after firmware teardown completes so that an NQ interrupt arriving during bnxt_qplib_destroy_srq() won't write the toggle values to an already-freed page. Move free_page() after bnxt_qplib_destroy_srq().

In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: fix integer overflow in bpf_msg_pop_data() bounds check start and len are u32, so u64 last = start + len; evaluates start + len in 32-bit and wraps before storing it in last. The bounds check if (start >= offset + l || last > msg->sg.size) return -EINVAL; can then be passed with an out-of-range start/len, after which the pop loop runs off the end of the scatterlist and sk_msg_shift_left() calls put_page() on the empty msg->sg.end slot: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] RIP: 0010:sk_msg_shift_left net/core/filter.c:2957 [inline] RIP: 0010:____bpf_msg_pop_data net/core/filter.c:3103 [inline] RIP: 0010:bpf_msg_pop_data+0x753/0x1a10 net/core/filter.c:2984 Call Trace: <TASK> bpf_prog_4cc92c278f4d5d56+0x1b1/0x1e8 bpf_prog_run_pin_on_cpu+0x107/0x320 include/linux/filter.h:746 sk_psock_msg_verdict+0x357/0x7f0 net/core/skmsg.c:934 tcp_bpf_send_verdict net/ipv4/tcp_bpf.c:420 [inline] tcp_bpf_sendmsg+0x766/0x1ae0 net/ipv4/tcp_bpf.c:583 __sock_sendmsg+0x153/0x1c0 net/socket.c:802 __sys_sendto+0x326/0x430 net/socket.c:2265 __x64_sys_sendto+0xe3/0x100 net/socket.c:2268 do_syscall_64+0x14c/0x480 entry_SYSCALL_64_after_hwframe+0x77/0x7f </TASK> Widen the addition with a (u64) cast so the bound is evaluated in 64-bit and a len near U32_MAX no longer wraps below msg->sg.size. While here, change pop from int to u32. It counts bytes against the unsigned scatterlist lengths and can never be negative, so the signed type only invites sign-confusion in the pop loop.

In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: avoid stale FIFO cells during resize snd_seq_fifo_resize() still needs to publish the replacement pool before it waits for FIFO users. A blocking snd_seq_read() holds f->use_lock while it sleeps, so concurrent senders must be able to queue to the new pool and wake that reader instead of failing against a closing old pool. However, snd_seq_fifo_event_in() duplicates an event before it takes f->lock, and snd_seq_read() can dequeue a cell and later call snd_seq_fifo_cell_putback() if copy_to_user() or snd_seq_expand_var_event() fails. If resize swaps f->pool and detaches oldhead in between, either path can relink an old-pool cell after the snapshot. That stale cell sits outside the drained oldhead list, keeps oldpool->counter elevated, and can leave snd_seq_pool_delete() waiting for the retired pool to drain. Keep the existing swap-before-wait ordering in snd_seq_fifo_resize(), but reject stale cells before any FIFO relink. Revalidate event-in cells under f->lock and retry them against the published replacement pool, and free stale putback cells instead of linking them back into the FIFO. The buggy scenario involves two paths, with each column showing the order within that path: resize path: relink path: 1. Allocate newpool. 1. Take f->use_lock. 2. Swap f->pool to newpool and 2. Duplicate or dequeue an old-pool detach oldhead. cell before oldpool closes. 3. Mark oldpool closing and 3. Reach a later relink point after wait for FIFO users. resize published newpool. 4. Free oldhead and delete 4. Relink the old-pool cell after oldpool. resize detached oldhead. 5. Drop f->use_lock. The reproducer reports a resize ioctl blocked in the expected pool teardown path: signal: resize iteration=98 target_pool=4 exceeded 250ms (elapsed=251ms) diagnostic: resize_tid=651 wchan=snd_seq_pool_done diagnostic: resize_tid=651 stack= snd_seq_pool_done+0x5b/0x140 snd_seq_pool_delete+0x7a/0x90 snd_seq_fifo_resize+0x193/0x1e0 snd_seq_ioctl_set_client_pool+0x214/0x260 snd_seq_ioctl+0x119/0x540 __x64_sys_ioctl+0xd1/0x120 do_syscall_64+0xbb/0x2f0 entry_SYSCALL_64_after_hwframe+0x77/0x7f A second run with larger pools hit the same target path: signal: resize iteration=32 target_pool=64 exceeded 250ms (elapsed=251ms) diagnostic: resize_tid=663 wchan=snd_seq_pool_done diagnostic: resize_tid=663 stack= snd_seq_pool_done+0x5b/0x140 snd_seq_pool_delete+0x7a/0x90 snd_seq_fifo_resize+0x193/0x1e0 snd_seq_ioctl_set_client_pool+0x214/0x260 snd_seq_ioctl+0x119/0x540 __x64_sys_ioctl+0xd1/0x120 do_syscall_64+0xbb/0x2f0 entry_SYSCALL_64_after_hwframe+0x77/0x7f

In the Linux kernel, the following vulnerability has been resolved: cxl/region: Resolve region deletion races Sungwoo noticed that the sysfs trigger to delete a region may try to delete a region multiple times. It also has no exclusion relative to the kernel releasing the region via CXL root device teardown. Instead of installing new cxl root devres actions per region, use the existing root decoder unregistration event to remove all remaining regions. An xarray of regions replaces a devres list of regions. This handles 3 separate issues with the old approach: 1/ sysfs users racing to delete the same region: no longer possible now that the regions_lock is held over the lookup and deletion. 2/ multiple actions triggering deletion of the same region: solved by erasing regions while holding @regions_lock, and only proceeding on successful erasure. 3/ userspace racing devres_release_all() to trigger the devres not found warning: solved by sysfs unregistration not requiring a release action

In the Linux kernel, the following vulnerability has been resolved: cxl/region: Block region delete during region creation Expand the range lock, rename it "regions_lock", to disable region deletion in the critical period between construct_region() and attach_target(), as well as the period between device_add() and registering the remove actions. Otherwise, userspace can confuse the kernel. It can violate the assumption the region stays registered through the completion of cxl_add_to_region(). It can violate the assumption that devm_add_action_or_reset() is working with a live 'struct cxl_region'. It is ok for the region to disappear outside of those windows as that mirrors device hotplug flows where the proper locks are held.

In the Linux kernel, the following vulnerability has been resolved: cxl/region: Fill first free targets[] slot during auto-discovery Any invalid endpoint decoder pointer in the target array of an active region is not allowed by cxl driver. This means cxl driver always assumes the first p->nr_targets entries of the target array in an auto-assembly region are valid. However, there are scenarios that could leave NULL endpoint decoder pointer holes in the target array. 1. When cxl_cancel_auto_attach() removes an endpoint decoder from a target array, the target slot is set to NULL. If the removed endpoint decoder is not the last element in the target array, the target array will contain a NULL hole. 2. When a auto-assembly region removes an assigned endpoint decoder, if the removed endpoint decoder is not the last element in the target array, always remains a NULL hole in the target array. When a NULL pointer hole exists in a region's target array, it introduces two potential problems: 1. Access an endpoint decoder via a NULL pointer. it always trigger calltrace like that. Oops: general protection fault, probably for non-canonical address 0xdffffc0000000008: 0000 [#1] SMP KASAN PTI RIP: 0010:cxl_calc_interleave_pos+0x26/0x810 [cxl_core] Call Trace: <TASK> cxl_region_attach+0xc50/0x2140 [cxl_core] cxl_add_to_region+0x321/0x2330 [cxl_core] discover_region+0x92/0x150 [cxl_port] device_for_each_child+0xf3/0x170 cxl_port_probe+0x150/0x200 [cxl_port] cxl_bus_probe+0x4f/0xa0 [cxl_core] really_probe+0x1c8/0x960 __driver_probe_device+0x323/0x450 driver_probe_device+0x45/0x120 __device_attach_driver+0x15d/0x280 bus_for_each_drv+0x10f/0x190 2. Not having enough valid endpoint decoders attached to an auto-assembly region. if an auto-assembly region is created with lock flag or assigned endpoint decoder with lock flag, which means assigned endpoint decoder will not be reset during detaching, they could re-attach to the auto-assembly region again. But cxl region driver relies on p->nr_targets to verify whether the required number of endpoint decoders has been attached, and NULL endpoint decoder pointers are still counted in that case. To fix above issues, adjust cxl_region_attach_auto() logic to find the first free target slot for endpoint decoder attachment, this ensures NULL holes in the target array are filled, rather than adding new endpoint decoders at the tail of the target array.

In the Linux kernel, the following vulnerability has been resolved: net: pfcp: allocate per-cpu tstats for PFCP netdevs PFCP uses dev_get_tstats64() as its ndo_get_stats64 callback, but pfcp_link_setup() does not request NETDEV_PCPU_STAT_TSTATS. The net core therefore leaves dev->tstats NULL for PFCP devices. Creating a PFCP rtnetlink device can immediately ask the new netdev for stats while building the RTM_NEWLINK notification. That reaches dev_get_tstats64() and dereferences the NULL dev->tstats pointer. Set pcpu_stat_type to NETDEV_PCPU_STAT_TSTATS during PFCP link setup so the net core allocates the storage expected by dev_get_tstats64().

In the Linux kernel, the following vulnerability has been resolved: net: Stop leased rxq before uninstalling its memory provider netif_rxq_cleanup_unlease() tears down the memory provider that was installed on a physical RX queue through a netkit queue lease. It currently revokes the provider's DMA mappings before stopping the physical queue: __netif_mp_uninstall_rxq(virt_rxq, p); /* DMA unmap */ __netif_mp_close_rxq(phys_rxq->dev, rxq_idx, p); /* queue stop */ This inverts the ordering used by the regular teardown paths (normal device unregister and the io_uring zcrx close path), which stop the queue before revoking the provider's mappings. With the physical queue still live, its NAPI can keep consuming net_iov entries from the page_pool alloc cache after the __netif_mp_uninstall_rxq() has already cleared their dma_addr, opening a window for the device to DMA to a stale or zero address. Fix it by swapping the two calls so the queue is stopped (and its NAPI quiesced) before the provider is uninstalled. No functional regression was observed across repeated runs of the nk_qlease.py HW selftest, which exercises the lease teardown path; this was tested against fbnic QEMU emulation.

In the Linux kernel, the following vulnerability has been resolved: ASoC: meson: aiu: Validate written enum values The AIU HDMI and internal codec mux put callbacks use the written enum value with snd_soc_enum_item_to_val() before checking whether the value is valid for the enumeration. Reject out-of-range values before converting the enum item, matching the validation already done by the G12A HDMI and internal codec mux controls.

In the Linux kernel, the following vulnerability has been resolved: bpf: Tighten cgroup storage cookie checks for prog arrays The fix in commit abad3d0bad72 ("bpf: Fix oob access in cgroup local storage") is still incomplete. The prog-array compatibility check treats a program with no cgroup storage as compatible with any stored storage cookie. This allows a storage-less program to bridge a tail call chain between an entry program and a storage-using callee even though cgroup local storage at runtime still follows the caller's context, that is, A -> B(no storage) -> C(storage) path. Requiring exact cookie equality would break the legitimate case of a storage-less leaf program being tail called from a storage-using one. Instead, only accept a zero storage cookie if the program cannot perform tail calls itself. This keeps A -> B(no storage) working while rejecting the A -> B(no storage) -> C(storage) bridge.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btmtk: fix URB leak in alloc_mtk_intr_urb error path When btmtk_isopkt_pad() fails, the previously allocated URB is not freed, leaking the urb structure. Add usb_free_urb() before returning the error.

In the Linux kernel, the following vulnerability has been resolved: apparmor: fix race in unix socket mediation when peer_path is used The holding a reference to the peer_sk is not enough to ensure access to the peer sk path. Accessing the path outside of the state lock allows for a race with unix_release_sock(). Fix this by taking the state lock and getting a reference to the path under lock. Ideally for connected sockets we would cache this information so we don't have to take the lock here. But for now just fix the race.

In the Linux kernel, the following vulnerability has been resolved: xprtrdma: Repost Receive buffers for malformed replies rpcrdma_wc_receive() decrements the transport's Receive count for every completion before it dispatches a successful Receive to rpcrdma_reply_handler(). The handler must post a replacement Receive WR before returning unless ownership of the rep has moved elsewhere, as on the backchannel path. Commit 2ae50ad68cd7 ("xprtrdma: Close window between waking RPC senders and posting Receives") moved the Receive refill out of rpcrdma_wc_receive(), where it had run ahead of every reply, into rpcrdma_reply_handler() so that the responder's credit grant could be parsed before reposting. The bad-version and short-reply exits never reach that refill: they recycle the rep and return without calling rpcrdma_post_recvs(). A remote peer can therefore drain the client's posted Receive queue by sending a sustained stream of replies that are shorter than the fixed transport header or that carry an unrecognized RPC/RDMA version. Each such reply consumes one posted Receive without replacing it. Once the queue empties, the peer's next Send finds no posted Receive and the transport stalls until reconnect. Route both malformed-reply exits through the shared repost tail after recycling the rep, refilling against buf->rb_credits, the most recent accepted credit grant. Neither exit updates the congestion window, so RPCs admitted under the previous grant remain in flight awaiting replies. A smaller refill target would let a stream of malformed replies ratchet the posted Receive count down to the batch floor while the congestion window still admits rb_credits RPCs; a burst of valid replies to those RPCs could then overrun the posted Receives, and because the client connects with rnr_retry_count of zero, a single RNR NAK terminates the connection. Refilling against rb_credits also restores the target that applied to malformed replies before commit 2ae50ad68cd7 ("xprtrdma: Close window between waking RPC senders and posting Receives") when rpcrdma_post_recvs() computed it from rb_credits internally. rb_credits is at least one from connection establishment onward, so the repost path always keeps Receives posted.

In the Linux kernel, the following vulnerability has been resolved: xprtrdma: Fix bcall rep leak and unbounded peek rpcrdma_is_bcall() decodes a reply's first words to decide whether the frame is a backchannel call. Two issues in that decode path let a short or malformed reply leak the receive buffer and drain the Receive queue. First, the speculative peek p = xdr_inline_decode(xdr, 0); /* five p++ reads follow */ asks xdr_inline_decode() for zero bytes, which returns xdr->p without consulting xdr->end. The five subsequent __be32 reads can then walk up to 20 bytes past the wire payload into stale regbuf contents and misclassify the reply as a backchannel call. Second, after the post-peek p = xdr_inline_decode(xdr, 3 * sizeof(*p)); if (unlikely(!p)) return true; the short-header arm returns true without calling rpcrdma_bc_receive_call(). The contract with the caller is that a true return transfers ownership of rep to the backchannel path: rpcrdma_reply_handler() if (rpcrdma_is_bcall(r_xprt, rep)) return; /* bare return, skips out_post */ ... out_post: rpcrdma_post_recvs(r_xprt, credits + ...); Because rpcrdma_bc_receive_call() never ran, no one took rep, but rpcrdma_reply_handler still bare-returns past rpcrdma_rep_put() and rpcrdma_post_recvs(). The rep, with its persistently DMA-mapped receive buffer, is orphaned on rb_all_reps and freed only at transport teardown. This completion reposts nothing, so its slot is reclaimed only when a later forward-channel reply reaches out_post and rpcrdma_post_recvs() allocates a fresh rep to backfill; absent that traffic the Receive queue drains and the peer's Sends draw RNR NAKs. Fix by consulting xdr->end after the zero-length peek so the five __be32 reads cannot run unless 20 bytes of wire payload remain. A byte-precise comparison against xdr->end is required because a non-4-aligned receive rounds the stream's word count up past the true payload. Also return false from the short-header arm so the reply falls through the normal out_norqst cleanup chain (rpcrdma_rep_put() plus rpcrdma_post_recvs()).

In the Linux kernel, the following vulnerability has been resolved: apparmor: fail policy unpack on accept2 allocation failure unpack_pdb() may need to allocate a missing ACCEPT2 table for older policy data. If that allocation failed, it set an error message but jumped to the success path, returning a policydb with the required table missing. Return -ENOMEM through the normal failure path when the ACCEPT2 allocation fails. Remove the now-unused out label.

In the Linux kernel, the following vulnerability has been resolved: apparmor: fix uninitialised pointer passed to audit_log_untrustedstring() Commit 4a134723f9f1 ("apparmor: move check for aa_null file to cover all cases") intrdouced a small bug, where path_name() may pass a potentially uninitialized *name to aa_audit_file() if the path->dentry had been replaced with aa_null.dentry earlier on. This can lead to page fault like one observed on 7.0.2 openSUSE Tumbleweed kernel: [51692.242756] [ T24690] BUG: unable to handle page fault for address: 0000000f00000003 [51692.242762] [ T24690] #PF: supervisor read access in kernel mode [51692.242763] [ T24690] #PF: error_code(0x0000) - not-present page [51692.242765] [ T24690] PGD 0 P4D 0 [51692.242768] [ T24690] Oops: Oops: 0000 [#1] SMP NOPTI [51692.242772] [ T24690] CPU: 3 UID: 1020 PID: 24690 Comm: snap-confine Tainted: G O 7.0.2-1-default #1 PREEMPT(full) openSUSE Tumbleweed ab90b4c9940707f9cafa19bdad80b2cec52dbe51 [51692.242775] [ T24690] Tainted: [O]=OOT_MODULE [51692.242777] [ T24690] Hardware name: Framework Laptop 13 (AMD Ryzen 7040Series)/FRANMDCP05, BIOS 03.18 01/08/2026 [51692.242778] [ T24690] RIP: 0010:strlen+0x4/0x30 [51692.242783] [ T24690] Code: f7 75 ec 31 c0 e9 17 9f 00 ff 48 89 f8 e9 0f 9f 00 ff 0f 1f 40 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa <80> 3f 00 74 18 48 89 f8 0f 1f 40 00 48 83 c0 01 80 38 00 75 f7 48 [51692.242785] [ T24690] RSP: 0018:ffffd015eb1e3608 EFLAGS: 00010282 [51692.242787] [ T24690] RAX: 0000000000000000 RBX: ffff89796198a360 RCX: 0000000000000000 [51692.242788] [ T24690] RDX: 00000000000000d1 RSI: 0000000f00000003 RDI: 0000000f00000003 [51692.242790] [ T24690] RBP: ffffffffb7ede090 R08: 00000000000005f5 R09: 0000000000000000 [51692.242791] [ T24690] R10: 0000000000000000 R11: 0000000000000000 R12: ffffd015eb1e3700 [51692.242792] [ T24690] R13: ffff8977a22bc380 R14: ffffffffb7ec5190 R15: ffff8977a0c8aa80 [51692.242794] [ T24690] FS: 0000000000000000(0000) GS:ffff897f640d8000(0000) knlGS:0000000000000000 [51692.242796] [ T24690] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [51692.242797] [ T24690] CR2: 0000000f00000003 CR3: 00000006ad15f000 CR4: 0000000000f50ef0 [51692.242799] [ T24690] PKRU: 55555554 [51692.242800] [ T24690] Call Trace: [51692.242802] [ T24690] <TASK> [51692.242804] [ T24690] audit_log_untrustedstring+0x1d/0x40 [51692.242811] [ T24690] common_lsm_audit+0x71/0x1d0 [51692.242816] [ T24690] aa_audit+0x5a/0x170 [51692.242819] [ T24690] aa_audit_file+0x18a/0x1b0 [51692.242825] [ T24690] path_name+0xd2/0x100 [51692.242829] [ T24690] profile_path_perm.part.0+0x58/0xb0 [51692.242832] [ T24690] aa_path_perm+0xef/0x150 [51692.242837] [ T24690] apparmor_file_open+0x153/0x2e0 [51692.242840] [ T24690] security_file_open+0x46/0xd0 [51692.242844] [ T24690] do_dentry_open+0xe9/0x4d0 [51692.242848] [ T24690] vfs_open+0x30/0x100 While here, initialise variables which are passed down to path_name().

In the Linux kernel, the following vulnerability has been resolved: apparmor: fix NULL pointer dereference in unpack_pdb pdb->dfa could be NULL if unpack_dfa fails, causing a NULL pointer dereference.

In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: qcom: clear opened when stream enable fails On enable, subs->opened is set before the service_interval is validated; an invalid interval jumps to the response label without clearing it, so the substream is wedged at -EBUSY until a disable or disconnect. Clear subs->opened on the enable error path.

In the Linux kernel, the following vulnerability has been resolved: sctp: hold socket lock when dumping endpoints in sctp_diag SCTP_DIAG endpoint dumping was traversing endpoint address lists without holding lock_sock(), while those lists could change concurrently via socket operations (e.g., bindx changes). This creates a race where nla_reserve() counts addresses under RCU protection, but the subsequent copy may see fewer entries, potentially leaking uninitialized memory to userspace. Fix this by: - Taking a reference on each endpoint during hash traversal - Moving socket operations (lock_sock()) outside read_lock_bh() - Serializing address list access during dump - Reworking sctp_for_each_endpoint() to support restart-based traversal with (net, pos) tracking Also: - Add WARN_ON_ONCE() for inconsistent address counts - Fix idiag_states filtering for LISTEN vs association cases - Skip dumping endpoints being freed (ep->base.dead) - Move dump position tracking into iterator, removing cb->args[4] and its comment for sctp_ep_dump()., - Update the comment for cb->args[4] and remove the comment for unused cb->args[5] for sctp_sock_dump(). Note: traversal is restart-based and may re-scan buckets multiple times, but this is acceptable due to small bucket sizes and required to support sleeping-safe callbacks. This issue was reported by Nico Yip (@_cyeaa_) working with TrendAI Zero Day Initiative.

In the Linux kernel, the following vulnerability has been resolved: f2fs: fix potential deadlock in f2fs_balance_fs() When the f2fs filesystem space is nearly exhausted, we encounter deadlock issues as below: INFO: task A:1890 blocked for more than 120 seconds. Tainted: G O 6.12.41-g3fe07ddf05ab #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:A state:D stack:0 pid:1890 tgid:1626 ppid:1153 flags:0x00000204 Call trace: __switch_to+0xf4/0x158 __schedule+0x27c/0x908 schedule+0x3c/0x118 io_schedule+0x44/0x68 folio_wait_bit_common+0x174/0x370 folio_wait_bit+0x20/0x38 folio_wait_writeback+0x54/0xc8 truncate_inode_partial_folio+0x70/0x1e0 truncate_inode_pages_range+0x1b0/0x450 truncate_pagecache+0x54/0x88 f2fs_file_write_iter+0x3e8/0xb80 do_iter_readv_writev+0xf0/0x1e0 vfs_writev+0x138/0x2c8 do_writev+0x88/0x130 __arm64_sys_writev+0x28/0x40 invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0xc8/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x30/0xf8 el0t_64_sync_handler+0x120/0x130 el0t_64_sync+0x190/0x198 INFO: task kworker/u8:11:2680853 blocked for more than 120 seconds. Tainted: G O 6.12.41-g3fe07ddf05ab #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u8:11 state:D stack:0 pid:2680853 tgid:2680853 ppid:2 flags:0x00000208 Workqueue: writeback wb_workfn (flush-254:0) Call trace: __switch_to+0xf4/0x158 __schedule+0x27c/0x908 schedule+0x3c/0x118 io_schedule+0x44/0x68 folio_wait_bit_common+0x174/0x370 __filemap_get_folio+0x214/0x348 pagecache_get_page+0x20/0x70 f2fs_get_read_data_page+0x150/0x3e8 f2fs_get_lock_data_page+0x2c/0x160 move_data_page+0x50/0x478 do_garbage_collect+0xd38/0x1528 f2fs_gc+0x240/0x7e0 f2fs_balance_fs+0x1a0/0x208 f2fs_write_single_data_page+0x6e4/0x730 f2fs_write_cache_pages+0x378/0x9b0 f2fs_write_data_pages+0x2e4/0x388 do_writepages+0x8c/0x2c8 __writeback_single_inode+0x4c/0x498 writeback_sb_inodes+0x234/0x4a8 __writeback_inodes_wb+0x58/0x118 wb_writeback+0x2f8/0x3c0 wb_workfn+0x2c4/0x508 process_one_work+0x180/0x408 worker_thread+0x258/0x368 kthread+0x118/0x128 ret_from_fork+0x10/0x200 INFO: task kworker/u8:8:2641297 blocked for more than 120 seconds. Tainted: G O 6.12.41-g3fe07ddf05ab #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u8:8 state:D stack:0 pid:2641297 tgid:2641297 ppid:2 flags:0x00000208 Workqueue: writeback wb_workfn (flush-254:0) Call trace: __switch_to+0xf4/0x158 __schedule+0x27c/0x908 rt_mutex_schedule+0x30/0x60 __rt_mutex_slowlock_locked.constprop.0+0x460/0x8a8 rwbase_write_lock+0x24c/0x378 down_write+0x1c/0x30 f2fs_balance_fs+0x184/0x208 f2fs_write_inode+0xf4/0x328 __writeback_single_inode+0x370/0x498 writeback_sb_inodes+0x234/0x4a8 __writeback_inodes_wb+0x58/0x118 wb_writeback+0x2f8/0x3c0 wb_workfn+0x2c4/0x508 process_one_work+0x180/0x408 worker_thread+0x258/0x368 kthread+0x118/0x128 ret_from_fork+0x10/0x20 INFO: task B:1902 blocked for more than 120 seconds. Tainted: G O 6.12.41-g3fe07ddf05ab #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:B state:D stack:0 pid:1902 tgid:1626 ppid:1153 flags:0x0000020c Call trace: __switch_to+0xf4/0x158 __schedule+0x27c/0x908 rt_mutex_schedule+0x30/0x60 __rt_mutex_slowlock_locked.constprop.0+0x460/0x8a8 rwbase_write_lock+0x24c/0x378 down_write+0x1c/0x30 f2fs_balance_fs+0x184/0x208 f2fs_map_blocks+0x94c/0x1110 f2fs_file_write_iter+0x228/0xb80 do_iter_readv_writev+0xf0/0x1e0 vfs_writev+0x138/0x2c8 do_writev+0x88/0x130 __arm64_sys_writev+0x28/0x40 invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0xc8/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x30/0xf8 el0t_64_sync_handler+0x120/0x130 el0t_64_sync+0x190/0x198 INFO: task sync:2769849 blocked for more than 120 seconds. Tainted: G ---truncated---

In the Linux kernel, the following vulnerability has been resolved: netfs: Fix barriering when walking subrequest list Fix the barriering used when walking the subrequest list in retry as there's a possibility of seeing a subreq that's just been added by the application thread.

In the Linux kernel, the following vulnerability has been resolved: liveupdate: validate session type before performing operation The sessions ioctls are not applicable to all session types. PRESERVE_FD is only applicable to outgoing sessions. RETRIEVE_FD and FINISH are only valid for incoming session. Calling a incoming ioctl on an outgoing session is invalid and can cause file handlers to run into unexpected errors. For example, a user can create a (outgoing) session, preserve a memfd, and then immediately do a retrieve without doing a kexec in between. This would result in memfd's retrieve handler to run. The handlers expects to be called from a post-kexec context, and will try to do a kho_restore_vmalloc() or kho_restore_folio() to try and restore memory. KHO catches this (thanks to KHO_PAGE_MAGIC) and returns an error, but since this is considered an internal error and KHO throws out a bunch of WARN()s. Associate a type with each ioctl op and validate the type in luo_session_ioctl() before dispatching the ioctl handler to make sure the op is being called for the right session type.

In the Linux kernel, the following vulnerability has been resolved: mmc: sdhci-esdhc-imx: disable irq during suspend to fix unhandled interrupt When using WIFI out-of-band wakeup, an "irq xxx: nobody cared" warning occurs. This happens because the usdhc interrupt is not disabled during system suspend when device_may_wakeup() returns false. The sequence of events leading to this issue: 1. System enters suspend without disabling usdhc interrupt (because device_may_wakeup() returns false for usdhc device) 2. WIFI out-of-band wakeup triggers system resume via GPIO interrupt 3. WIFI sends a Card interrupt before usdhc has fully resumed 4. usdhc is still in runtime suspend state and cannot handle the interrupt properly 5. The unhandled interrupt triggers "nobody cared" warning Fix this by unconditionally disabling the usdhc interrupt during suspend and re-enabling it during resume, regardless of the wakeup capability. This ensures no interrupts are processed during the suspend/resume transition.

In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: lpc32xx_slc: fail DMA transfer on completion timeout lpc32xx_xmit_dma() waits for the DMA completion callback but ignores wait_for_completion_timeout(). A timed out DMA transfer is therefore unmapped and reported as successful to the NAND read/write path. Return -ETIMEDOUT when the completion wait expires. Terminate the DMA channel before unmapping the scatterlist so the timed out transfer cannot continue to access the buffer after the error is returned.

In the Linux kernel, the following vulnerability has been resolved: scsi: elx: efct: Fix I/O leak on unsupported additional CDB efct_dispatch_fcp_cmd() allocates an efct_io before dispatching an unsolicited FCP command. If the command has an unsupported additional CDB, the function returns -EIO before handing the IO to the SCSI layer. Free the allocated IO before returning from this error path.

In the Linux kernel, the following vulnerability has been resolved: dm-integrity: fix leaking uninitialized kernel memory If hash size is less than device's tuple size, dm-integrity is supposed to zero the remaining space. There was a bug in the code that zeroing didn't work. This commit fixes it.

In the Linux kernel, the following vulnerability has been resolved: hfsplus: Remove the duplicate attr inode dirty marking action Syzbot reported a null-ptr-deref in [1]. If the attributes file is not loaded during system mount, a trigger occurs [1] when setxattr is executed in userspace. Remove the first mark attr inode dirty operation. [1] KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] Call Trace: hfsplus_setxattr+0x124/0x340 fs/hfsplus/xattr.c:555 hfsplus_trusted_setxattr+0x40/0x60 fs/hfsplus/xattr_trusted.c:30 __vfs_setxattr+0x43c/0x480 fs/xattr.c:218 __vfs_setxattr_noperm+0x12d/0x660 fs/xattr.c:252 vfs_setxattr+0x163/0x360 fs/xattr.c:339 do_setxattr fs/xattr.c:654 [inline]

In the Linux kernel, the following vulnerability has been resolved: ublk: reset kernel-owned dev_info fields in ublk_ctrl_add_dev() ublk_ctrl_add_dev() memcpy()s the userspace ublksrv_ctrl_dev_info into ub->dev_info and then fixes up the fields the driver owns, but misses ->state and ->ublksrv_pid. A device added with ->state = UBLK_S_DEV_LIVE passes the "->state != UBLK_S_DEV_DEAD" test that ublk_stop_dev_unlocked() uses as its proxy for "a disk is attached", while ->ub_disk is still NULL, so DEL_DEV right after ADD_DEV oopses in del_gendisk(). UBLK_S_DEV_QUIESCED plus UBLK_F_USER_RECOVERY dies one step earlier, in ublk_force_abort_dev(). A poisoned ->state also gets START_USER_RECOVERY and the char device read/write path onto a device that was never started, and wedges START_DEV at -EEXIST. A poisoned ->ublksrv_pid just makes GET_DEV_INFO report an unrelated task as the ublk server. Reset both after the memcpy(), as ublk_detach_disk() does. Userspace only ever reads these back, so correcting them silently breaks nothing. ADD_DEV has copied ->state in unsanitized since ublk was merged, but back then it was harmless: the gendisk was allocated during ADD_DEV, and both teardown and the START_DEV -EEXIST check keyed off disk_live() rather than ->state. The oops became reachable once the disk allocation moved to START_DEV and those checks switched to ->state.

In the Linux kernel, the following vulnerability has been resolved: can: bcm: defer rx_op deallocation to workqueue to fix thrtimer UAF Commit f1b4e32aca08 ("can: bcm: use call_rcu() instead of costly synchronize_rcu()") replaced synchronize_rcu() in bcm_delete_rx_op() with call_rcu() and introduced the RX_NO_AUTOTIMER flag. However, this flag check was omitted for thrtimer in the packet rx fast-path. During BCM RX operation teardown, a concurrent RCU reader (bcm_rx_handler) can race and re-arm thrtimer via bcm_rx_update_and_send() after call_rcu() has been scheduled. Once the RCU grace period elapses, bcm_op is freed. The subsequently firing thrtimer then dereferences the deallocated op, causing a UAF. Adding flag checks to the rx fast-path (bcm_rx_update_and_send) does not fully close the TOCTOU race and introduces latency for every CAN frame. Conversely, calling hrtimer_cancel() directly inside the RCU callback (softirq context) is fatal as hrtimer_cancel() can sleep, triggering a "scheduling while atomic" panic. Resolve this by deferring the timer cancellation and memory free to a dedicated unbound workqueue (bcm_wq). The RCU callback now queues a work item to bcm_wq, which safely cancels both timers and deallocates memory in sleepable process context. A dedicated workqueue is used to prevent system-wide WQ saturation and is cleanly flushed/destroyed on module unload to avoid rmmod page faults. Since the deferred work can now outlive the calling context by an unbounded amount, also take a reference on op->sk when it is assigned and drop it only once the deferred work has cancelled both timers, so a socket can no longer be freed out from under a still-armed timer whose callback (bcm_send_to_user()) dereferences op->sk.