CVE Feed

Multiple OS command injection vulnerabilities exist in the libNetSetObj.so functionality of GeoVision GV-I/O Box 4E 2.09. A specially crafted network packet can lead to command execution. An attacker can send a network request to trigger this vulnerability. `libNetSetObj.so` is an internal library used by various binaries on the device to configure the network stack (start and stop various services, configure IP, Netmask, gateway, dns, etc.) #### CNetSetObj::m_F_n_Set_Gate_way command injection The following function takes a string as a gatewy address, performs no sanitization on it and calls `system`. This is a classic command injection vulnerability. The function is reachable from both the network-exposed `DVRSearch` service and the `Network.cgi` endpoint. int __fastcall CNetSetObj::m_F_n_Set_Gate_way(const char **this, char *gw, char *dev) { char s[324]; // [sp+4h] [bp-144h] BYREF if ( !dev && !*this || !gw ) return 0; system("/sbin/route del -net 224.0.0.0 netmask 224.0.0.0"); system("/sbin/route del default "); if ( dev ) sprintf(s, "/sbin/route add default gw %s dev %s", gw, dev); //attacker controlled gw string else sprintf(s, "/sbin/route add default gw %s dev %s", gw, *this); //attacker controlled gw string system(s); sprintf(s, "/sbin/route add -net 224.0.0.0 netmask 224.0.0.0 gw %s dev %s", gw, *this); //attacker controlled gw string system(s); return 1; }

Multiple OS command injection vulnerabilities exist in the libNetSetObj.so functionality of GeoVision GV-I/O Box 4E 2.09. A specially crafted network packet can lead to command execution. An attacker can send a network request to trigger this vulnerability. `libNetSetObj.so` is an internal library used by various binaries on the device to configure the network stack (start and stop various services, configure IP, Netmask, gateway, dns, etc.) #### CNetSetObj::m_F_n_Set_Net_Mask command injection The following function takes a string as a net mask address, performs no sanitization on it and calls `system`. This is a classic command injection vulnerability. The function is reachable from both the network-exposed `DVRSearch` service and the `Network.cgi` endpoint. int __fastcall CNetSetObj::m_F_n_Set_Net_Mask(const char **this, char *netmask_addr) { bool v2; // zf char v4[72]; // [sp+0h] [bp-48h] BYREF v2 = *this == 0; if ( *this ) v2 = netmask_addr == 0; if ( v2 ) return 0; sprintf(v4, "/sbin/ifconfig %s netmask %s", *this, netmask_addr); // attacker controlled netmask_addr system(v4); return 1; }

Multiple OS command injection vulnerabilities exist in the libNetSetObj.so functionality of GeoVision GV-I/O Box 4E 2.09. A specially crafted network packet can lead to command execution. An attacker can send a network request to trigger this vulnerability. `libNetSetObj.so` is an internal library used by various binaries on the device to configure the network stack (start and stop various services, configure IP, Netmask, gateway, dns, etc.) #### CNetSetObj::m_F_n_Set_IP_Addr command injection The following function takes a string as an ip address, performs no sanitization and calls `system`. This is a classic command injection vulnerability. The function is reachable from both the network-exposed `DVRSearch` service and the `Network.cgi` endpoint. int __fastcall CNetSetObj::m_F_n_Set_IP_Addr(const char **this, char *ip_addr) { bool v2; // zf char v4[72]; // [sp+0h] [bp-48h] BYREF v2 = *this == 0; if ( *this ) v2 = ip_addr == 0; if ( v2 ) return 0; sprintf(v4, "/sbin/ifconfig %s %s", *this, ip_addr); // attacker controlled ip address system(v4); return 1; }

GV-I/O Box 4E is a smart embedded device with 4 input and 4 relays output that can be controlled over Ethernet and RS-485. DVRSearch is a service running by default on the IOBox listening for UDP messages on port 10001. Any user on the network can send messages to this service and interact with it. Upon receiving a UDP message, the server reads at most 1460 bytes into a local buffer and a pointer to the buffer is stored in a global variable: #### DNS field stack overflow The following code is vulnerable to a stack overflow that is attacker-controlled: v8 = strlen(g_network_config->dns_addr); memcpy(&reply_buf[248], g_network_config->dns_addr, v8);

GV-I/O Box 4E is a smart embedded device with 4 input and 4 relays output that can be controlled over Ethernet and RS-485. DVRSearch is a service running by default on the IOBox listening for UDP messages on port 10001. Any user on the network can send messages to this service and interact with it. Upon receiving a UDP message, the server reads at most 1460 bytes into a local buffer and a pointer to the buffer is stored in a global variable: #### Gateway field stack overflow The following code is vulnerable to a stack overflow that is attacker-controlled: v7 = strlen(g_network_config->gateway); memcpy(&reply_buf[216], g_network_config->gateway, v7);

GV-I/O Box 4E is a smart embedded device with 4 input and 4 relays output that can be controlled over Ethernet and RS-485. DVRSearch is a service running by default on the IOBox listening for UDP messages on port 10001. Any user on the network can send messages to this service and interact with it. Upon receiving a UDP message, the server reads at most 1460 bytes into a local buffer and a pointer to the buffer is stored in a global variable: #### Net Mask field stack overflow The following code is vulnerable to a stack overflow that is attacker-controlled: v6 = strlen(g_network_config->net_mask); memcpy(&reply_buf[184], g_network_config->net_mask, v6);

GV-I/O Box 4E is a smart embedded device with 4 input and 4 relays output that can be controlled over Ethernet and RS-485. DVRSearch is a service running by default on the IOBox listening for UDP messages on port 10001. Any user on the network can send messages to this service and interact with it. Upon receiving a UDP message, the server reads at most 1460 bytes into a local buffer and a pointer to the buffer is stored in a global variable: #### IP field stack overflow The following code is vulnerable to a stack overflow that is attacker-controlled: v3 = strlen(g_network_config->ip_addr); memcpy(&reply_buf[36], g_network_config->ip_addr, v3);

A memory corruption vulnerability exists in the GV-Cloud functionality of GeoVision GV-VMS V20 20.0.2.  A specially crafted network request can lead to a denial of service. An attacker can impersonate the legitimate server to trigger this vulnerability.

The ARForms plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the `value` parameter of the `arf_save_incomplete_form_data` AJAX action in all versions up to, and including, 7.1.3 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts that will execute whenever an administrator views the "Partial Filled Form Entries" page in the ARForms dashboard.

The Xpro Addons — 140+ Widgets for Elementor plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'custom_attributes' parameter in all versions up to, and including, 1.7.2 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with author-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page.

** REJECT ** DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: CVE-2026-56120. Reason: This candidate is a duplicate of CVE-2026-56120. Notes: All CVE users should reference CVE-2026-56120 instead of this candidate.

Improper Validation of Specified Index, Position, or Offset in Input vulnerability in Google go-attestation. parseEfiSignatureList() does not advance the buffer past vendor bytes before reading entries. For hashSHA256SigGUID lists, this allows attacker-controlled vendor header bytes to be appended to the trusted SHA256 hash list. A crafted TPM event log could inject arbitrary SHA256 hashes into the verifier's trusted measurement database, enabling a remote attestation verifier to accept a compromised boot state. This issue affects go-attestation: through 0.6.0.

Style Dictionary, a build system for creating cross-platform styles, has a prototype pollution vulnerability starting in version 4.3.0 and prior to version 5.4.4. Impact users have: direct usage of `convertTokenData(tokens, { output: 'object' });`; indirect usage, via using Expand API; and/or indirect usage via SD's transform lifecycle. Impact is high for this when style-dictionary is used as an integration in a NodeJS server application. Impact is moderate for when style-dictionary is used as an integration in a Web application. Impact is low for most common cases where the user of style-dictionary also maintains the tokens, and access is limited via read/write access to the repository/workflows where it is used. A patch has been published in version `5.4.4`. The only known workaround is to sanitize token data first. Whether using DTCG format or old Style Dictionary format, check the token data object recursively for any object keys that include `__proto__`.

In the Linux kernel, the following vulnerability has been resolved: batman-adv: tp_meter: avoid use of uninit sender vars batadv_tp_recv_ack() and batadv_tp_stop() are only valid for tp_vars in the BATADV_TP_SENDER role. When called with a BATADV_TP_RECEIVER role, it proceeds to read sender-only members that were never initialized, leading to undefined behavior. This can be triggered when a node that is currently acting as a receiver in an ongoing tp_meter session receives a malicious ACK packet. Guard against this by checking tp_vars->role immediately after the lookup and bailing out if it is not BATADV_TP_SENDER, before any of those members are accessed.

In the Linux kernel, the following vulnerability has been resolved: blk-cgroup: fix disk reference leak in blkcg_maybe_throttle_current() Add the missing put_disk() on the error path in blkcg_maybe_throttle_current(). When blkcg lookup, blkg lookup, or blkg_tryget() fails, the function jumps to the out label which only calls rcu_read_unlock() but does not release the disk reference acquired by blkcg_schedule_throttle() via get_device(). Since current->throttle_disk is already set to NULL before the lookup, blkcg_exit() cannot release this reference either, causing the disk to never be freed. Restore the reference release that was present as blk_put_queue() in the original code but was inadvertently dropped during the conversion from request_queue to gendisk.

In the Linux kernel, the following vulnerability has been resolved: amd-pstate: Fix memory leak in amd_pstate_epp_cpu_init() On failure to set the epp, the function amd_pstate_epp_cpu_init() returns with an error code without freeing the cpudata object that was allocated at the beginning of the function. Ensure that the cpudata object is freed before returning from the function. This memory leak was discovered by Claude Opus 4.6 with the aid of Chris Mason's AI review-prompts (https://github.com/masoncl/review-prompts/tree/main/kernel).

In the Linux kernel, the following vulnerability has been resolved: s390/ap: use generic driver_override infrastructure When the AP masks are updated via apmask_store() or aqmask_store(), ap_bus_revise_bindings() is called after ap_attr_mutex has been released. This calls __ap_revise_reserved(), which accesses the driver_override field without holding any lock, racing against a concurrent driver_override_store() that may free the old string, resulting in a potential UAF. Fix this by using the driver-core driver_override infrastructure, which protects all accesses with an internal spinlock. Note that unlike most other buses, the AP bus does not check driver_override in its match() callback; the override is checked in ap_device_probe() and __ap_revise_reserved() instead. Also note that we do not enable the driver_override feature of struct bus_type, as AP - in contrast to most other buses - passes "" to sysfs_emit() when the driver_override pointer is NULL. Thus, printing "\n" instead of "(null)\n". Additionally, AP has a custom counter that is modified in the corresponding custom driver_override_store().

In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix memory leaks in beacon template setup The functions ath11k_mac_setup_bcn_tmpl_ema() and ath11k_mac_setup_bcn_tmpl_mbssid() allocate memory for beacon templates but fail to free it when parameter setup returns an error. Since beacon templates must be released during normal execution, they must also be released in the error handling paths to prevent memory leaks. Fix this by using unified exit paths with proper cleanup in the respective error paths. Compile tested only. Issue found using a prototype static analysis tool and code review.

In the Linux kernel, the following vulnerability has been resolved: bpf: test_run: Fix the null pointer dereference issue in bpf_lwt_xmit_push_encap The bpf_lwt_xmit_push_encap helper needs to access skb_dst(skb)->dev to calculate the needed headroom: err = skb_cow_head(skb, len + LL_RESERVED_SPACE(skb_dst(skb)->dev)); But skb->_skb_refdst may not be initialized when the skb is set up by bpf_prog_test_run_skb function. Executing bpf_lwt_push_ip_encap function in this scenario will trigger null pointer dereference, causing a kernel crash as Yinhao reported: [ 105.186365] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 105.186382] #PF: supervisor read access in kernel mode [ 105.186388] #PF: error_code(0x0000) - not-present page [ 105.186393] PGD 121d3d067 P4D 121d3d067 PUD 106c83067 PMD 0 [ 105.186404] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 105.186412] CPU: 3 PID: 3250 Comm: poc Kdump: loaded Not tainted 6.19.0-rc5 #1 [ 105.186423] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 105.186427] RIP: 0010:bpf_lwt_push_ip_encap+0x1eb/0x520 [ 105.186443] Code: 0f 84 de 01 00 00 0f b7 4a 04 66 85 c9 0f 85 47 01 00 00 31 c0 5b 5d 41 5c 41 5d 41 5e c3 cc cc cc cc 48 8b 73 58 48 83 e6 fe <48> 8b 36 0f b7 be ec 00 00 00 0f b7 b6 e6 00 00 00 01 fe 83 e6 f0 [ 105.186449] RSP: 0018:ffffbb0e0387bc50 EFLAGS: 00010246 [ 105.186455] RAX: 000000000000004e RBX: ffff94c74e036500 RCX: ffff94c74874da00 [ 105.186460] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff94c74e036500 [ 105.186463] RBP: 0000000000000001 R08: 0000000000000002 R09: 0000000000000000 [ 105.186467] R10: ffffbb0e0387bd50 R11: 0000000000000000 R12: ffffbb0e0387bc98 [ 105.186471] R13: 0000000000000014 R14: 0000000000000000 R15: 0000000000000002 [ 105.186484] FS: 00007f166aa4d680(0000) GS:ffff94c8b7780000(0000) knlGS:0000000000000000 [ 105.186490] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 105.186494] CR2: 0000000000000000 CR3: 000000015eade001 CR4: 0000000000770ee0 [ 105.186499] PKRU: 55555554 [ 105.186502] Call Trace: [ 105.186507] <TASK> [ 105.186513] bpf_lwt_xmit_push_encap+0x2b/0x40 [ 105.186522] bpf_prog_a75eaad51e517912+0x41/0x49 [ 105.186536] ? kvm_clock_get_cycles+0x18/0x30 [ 105.186547] ? ktime_get+0x3c/0xa0 [ 105.186554] bpf_test_run+0x195/0x320 [ 105.186563] ? bpf_test_run+0x10f/0x320 [ 105.186579] bpf_prog_test_run_skb+0x2f5/0x4f0 [ 105.186590] __sys_bpf+0x69c/0xa40 [ 105.186603] __x64_sys_bpf+0x1e/0x30 [ 105.186611] do_syscall_64+0x59/0x110 [ 105.186620] entry_SYSCALL_64_after_hwframe+0x76/0xe0 [ 105.186649] RIP: 0033:0x7f166a97455d Temporarily add the setting of skb->_skb_refdst before bpf_test_run to resolve the issue.

In the Linux kernel, the following vulnerability has been resolved: powerpc/pgtable-frag: Fix bad page state in pte_frag_destroy powerpc uses pt_frag_refcount as a reference counter for tracking it's pte and pmd page table fragments. For PTE table, in case of Hash with 64K pagesize, we have 16 fragments of 4K size in one 64K page. Patch series [1] "mm: free retracted page table by RCU" added pte_free_defer() to defer the freeing of PTE tables when retract_page_tables() is called for madvise MADV_COLLAPSE on shmem range. [1]: https://lore.kernel.org/all/[email protected]/ pte_free_defer() sets the active flag on the corresponding fragment's folio & calls pte_fragment_free(), which reduces the pt_frag_refcount. When pt_frag_refcount reaches 0 (no active fragment using the folio), it checks if the folio active flag is set, if set, it calls call_rcu to free the folio, it the active flag is unset then it calls pte_free_now(). Now, this can lead to following problem in a corner case... [ 265.351553][ T183] BUG: Bad page state in process a.out pfn:20d62 [ 265.353555][ T183] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x20d62 [ 265.355457][ T183] flags: 0x3ffff800000100(active|node=0|zone=0|lastcpupid=0x7ffff) [ 265.358719][ T183] raw: 003ffff800000100 0000000000000000 5deadbeef0000122 0000000000000000 [ 265.360177][ T183] raw: 0000000000000000 c0000000119caf58 00000000ffffffff 0000000000000000 [ 265.361438][ T183] page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set [ 265.362572][ T183] Modules linked in: [ 265.364622][ T183] CPU: 0 UID: 0 PID: 183 Comm: a.out Not tainted 6.18.0-rc3-00141-g1ddeaaace7ff-dirty #53 VOLUNTARY [ 265.364785][ T183] Hardware name: IBM pSeries (emulated by qemu) POWER10 (architected) 0x801200 0xf000006 of:SLOF,git-ee03ae pSeries [ 265.364908][ T183] Call Trace: [ 265.364955][ T183] [c000000011e6f7c0] [c000000001cfaa18] dump_stack_lvl+0x130/0x148 (unreliable) [ 265.365202][ T183] [c000000011e6f7f0] [c000000000794758] bad_page+0xb4/0x1c8 [ 265.365384][ T183] [c000000011e6f890] [c00000000079c020] __free_frozen_pages+0x838/0xd08 [ 265.365554][ T183] [c000000011e6f980] [c0000000000a70ac] pte_frag_destroy+0x298/0x310 [ 265.365729][ T183] [c000000011e6fa30] [c0000000000aa764] arch_exit_mmap+0x34/0x218 [ 265.365912][ T183] [c000000011e6fa80] [c000000000751698] exit_mmap+0xb8/0x820 [ 265.366080][ T183] [c000000011e6fc30] [c0000000001b1258] __mmput+0x98/0x300 [ 265.366244][ T183] [c000000011e6fc80] [c0000000001c81f8] do_exit+0x470/0x1508 [ 265.366421][ T183] [c000000011e6fd70] [c0000000001c95e4] do_group_exit+0x88/0x148 [ 265.366602][ T183] [c000000011e6fdc0] [c0000000001c96ec] pid_child_should_wake+0x0/0x178 [ 265.366780][ T183] [c000000011e6fdf0] [c00000000003a270] system_call_exception+0x1b0/0x4e0 [ 265.366958][ T183] [c000000011e6fe50] [c00000000000d05c] system_call_vectored_common+0x15c/0x2ec The bad page state error occurs when such a folio gets freed (with active flag set), from do_exit() path in parallel. ... this can happen when the pte fragment was allocated from this folio, but when all the fragments get freed, the pte_frag_refcount still had some unused fragments. Now, if this process exits, with such folio as it's cached pte_frag in mm->context, then during pte_frag_destroy(), we simply call pagetable_dtor() and pagetable_free(), meaning it doesn't clear the active flag. This, can lead to the above bug. Since we are anyway in do_exit() path, then if the refcount is 0, then I guess it should be ok to simply clear the folio active flag before calling pagetable_dtor() & pagetable_free().

In the Linux kernel, the following vulnerability has been resolved: bpf: Do not allow deleting local storage in NMI Currently, local storage may deadlock when deferring freeing selem or local storage through kfree_rcu(), call_rcu() or call_rcu_tasks_trace() in NMI or reentrant. Since deleting selem in NMI is an unlikely use case, partially mitigate it by returning error when calling from bpf_xxx_storage_delete() helpers in NMI. Note that, it is still possible to deadlock through reentrant. A full mitigation requires returning error when irqs_disabled() is true, which, however is too heavy-handed for bpf_xxx_storage_delete(). The long-term solution requires _nolock versions of call_rcu. Another possible solution is to defer the free through irq_work [0], but it would grow the size of selem, which is non-ideal. The check is only needed in bpf_selem_unlink(), which is used by helpers and syscalls. bpf_selem_unlink_nofail() is fine as it is called during map and owner tear down that never run in NMI or reentrant. [0] https://lore.kernel.org/bpf/[email protected]/

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: Fix memory leak after mt76_connac_mcu_alloc_sta_req() mt76_connac_mcu_alloc_sta_req() allocates an skb which is expected to be freed eventually by mt76_mcu_skb_send_msg(). However, currently if an intermediate function fails before sending, the allocated skb is leaked. Specifically, mt76_connac_mcu_sta_wed_update() and mt76_connac_mcu_sta_key_tlv() may fail, leading to an immediate memory leak in the error path. Fix this by explicitly freeing the skb in these error paths. Commit 7c0f63fe37a5 ("wifi: mt76: mt7996: fix memory leak on mt7996_mcu_sta_key_tlv error") made a similar change. Compile tested only. Issue found using a prototype static analysis tool and code review.

In the Linux kernel, the following vulnerability has been resolved: bpf: return VMA snapshot from task_vma iterator Holding the per-VMA lock across the BPF program body creates a lock ordering problem when helpers acquire locks that depend on mmap_lock: vm_lock -> i_rwsem -> mmap_lock -> vm_lock Snapshot the VMA under the per-VMA lock in _next() via memcpy(), then drop the lock before returning. The BPF program accesses only the snapshot. The verifier only trusts vm_mm and vm_file pointers (see BTF_TYPE_SAFE_TRUSTED_OR_NULL in verifier.c). vm_file is reference- counted with get_file() under the lock and released via fput() on the next iteration or in _destroy(). vm_mm is already correct because lock_vma_under_rcu() verifies vma->vm_mm == mm. All other pointers are left as-is by memcpy() since the verifier treats them as untrusted.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix RCU stall in bpf_fd_array_map_clear() Add a missing cond_resched() in bpf_fd_array_map_clear() loop. For PROG_ARRAY maps with many entries this loop calls prog_array_map_poke_run() per entry which can be expensive, and without yielding this can cause RCU stalls under load: rcu: Stack dump where RCU GP kthread last ran: CPU: 0 UID: 0 PID: 30932 Comm: kworker/0:2 Not tainted 6.14.0-13195-g967e8def1100 #2 PREEMPT(undef) Workqueue: events prog_array_map_clear_deferred RIP: 0010:write_comp_data+0x38/0x90 kernel/kcov.c:246 Call Trace: <TASK> prog_array_map_poke_run+0x77/0x380 kernel/bpf/arraymap.c:1096 __fd_array_map_delete_elem+0x197/0x310 kernel/bpf/arraymap.c:925 bpf_fd_array_map_clear kernel/bpf/arraymap.c:1000 [inline] prog_array_map_clear_deferred+0x119/0x1b0 kernel/bpf/arraymap.c:1141 process_one_work+0x898/0x19d0 kernel/workqueue.c:3238 process_scheduled_works kernel/workqueue.c:3319 [inline] worker_thread+0x770/0x10b0 kernel/workqueue.c:3400 kthread+0x465/0x880 kernel/kthread.c:464 ret_from_fork+0x4d/0x80 arch/x86/kernel/process.c:153 ret_from_fork_asm+0x19/0x30 arch/x86/entry/entry_64.S:245 </TASK>

In the Linux kernel, the following vulnerability has been resolved: bpf: reject short IPv4/IPv6 inputs in bpf_prog_test_run_skb bpf_prog_test_run_skb() calls eth_type_trans() first and then uses skb->protocol to initialize sk family and address fields for the test run. For IPv4 and IPv6 packets, it may access ip_hdr(skb) or ipv6_hdr(skb) even when the provided test input only contains an Ethernet header. Reject the input earlier if the Ethernet frame carries IPv4/IPv6 EtherType but the L3 header is too short. Fold the IPv4/IPv6 header length checks into the existing protocol switch and return -EINVAL before accessing the network headers.

In the Linux kernel, the following vulnerability has been resolved: dm log: fix out-of-bounds write due to region_count overflow The local variable region_count in create_log_context() is declared as unsigned int (32-bit), but dm_sector_div_up() returns sector_t (64-bit). When a device-mapper target has a sufficiently large ti->len with a small region_size, the division result can exceed UINT_MAX. The truncated value is then used to calculate bitset_size, causing clean_bits, sync_bits, and recovering_bits to be allocated far smaller than needed for the actual number of regions. Subsequent log operations (log_set_bit, log_clear_bit, log_test_bit) use region indices derived from the full untruncated region space, causing out-of-bounds writes to kernel heap memory allocated by vmalloc. This can be reproduced by creating a mirror target whose region_count overflows 32 bits: dmsetup create bigzero --table '0 8589934594 zero' dmsetup create mymirror --table '0 8589934594 mirror \ core 2 2 nosync 2 /dev/mapper/bigzero 0 \ /dev/mapper/bigzero 0' The status output confirms the truncation (sync_count=1 instead of 4294967297, because 0x100000001 was truncated to 1): $ dmsetup status mymirror 0 8589934594 mirror 2 254:1 254:1 1/4294967297 ... This leads to a kernel crash in core_in_sync: BUG: scheduling while atomic: (udev-worker)/9150/0x00000000 RIP: 0010:core_in_sync+0x14/0x30 [dm_log] CR2: 0000000000000008 Fixing recursive fault but reboot is needed! Fix by widening the local region_count to sector_t and adding an explicit overflow check before the value is assigned to lc->region_count.

In the Linux kernel, the following vulnerability has been resolved: PCI: tegra194: Fix CBB timeout caused by DBI access before core power-on When PERST# is deasserted twice (assert -> deassert -> assert -> deassert), a CBB (Control Backbone) timeout occurs at DBI register offset 0x8bc (PCIE_MISC_CONTROL_1_OFF). This happens because pci_epc_deinit_notify() and dw_pcie_ep_cleanup() are called before reset_control_deassert() powers on the controller core. The call chain that causes the timeout: pex_ep_event_pex_rst_deassert() pci_epc_deinit_notify() pci_epf_test_epc_deinit() pci_epf_test_clear_bar() pci_epc_clear_bar() dw_pcie_ep_clear_bar() __dw_pcie_ep_reset_bar() dw_pcie_dbi_ro_wr_en() <- Accesses 0x8bc DBI register reset_control_deassert(pcie->core_rst) <- Core powered on HERE The DBI registers, including PCIE_MISC_CONTROL_1_OFF (0x8bc), are only accessible after the controller core is powered on via reset_control_deassert(pcie->core_rst). Accessing them before this point results in a CBB timeout because the hardware is not yet operational. Fix this by moving pci_epc_deinit_notify() and dw_pcie_ep_cleanup() to after reset_control_deassert(pcie->core_rst), ensuring the controller is fully powered on before any DBI register accesses occur.

In the Linux kernel, the following vulnerability has been resolved: gfs2: prevent NULL pointer dereference during unmount When flushing out outstanding glock work during an unmount, gfs2_log_flush() can be called when sdp->sd_jdesc has already been deallocated and sdp->sd_jdesc is NULL. Commit 35264909e9d1 ("gfs2: Fix NULL pointer dereference in gfs2_log_flush") added a check for that to gfs2_log_flush() itself, but it missed the sdp->sd_jdesc dereference in gfs2_log_release(). Fix that.

In the Linux kernel, the following vulnerability has been resolved: HID: usbhid: fix deadlock in hid_post_reset() You can build a USB device that includes a HID component and a storage or UAS component. The components can be reset only together. That means that hid_pre_reset() and hid_post_reset() are in the block IO error handling. Hence no memory allocation used in them may do block IO because the IO can deadlock on the mutex held while resetting a device and calling the interface drivers. Use GFP_NOIO for all allocations in them.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix NULL deref in map_kptr_match_type for scalar regs Commit ab6c637ad027 ("bpf: Fix a bpf_kptr_xchg() issue with local kptr") refactored map_kptr_match_type() to branch on btf_is_kernel() before checking base_type(). A scalar register stored into a kptr slot has no btf, so the btf_is_kernel(reg->btf) call dereferences NULL. Move the base_type() != PTR_TO_BTF_ID guard before any reg->btf access.

In the Linux kernel, the following vulnerability has been resolved: net/sched: act_mirred: fix wrong device for mac_header_xmit check in tcf_blockcast_redir In tcf_blockcast_redir(), when iterating block ports to redirect packets to multiple devices, the mac_header_xmit flag is queried from the wrong device. The loop sends to dev_prev but queries dev_is_mac_header_xmit(dev) — which is the NEXT device in the iteration, not the one being sent to. This causes tcf_mirred_to_dev() to make incorrect decisions about whether to push or pull the MAC header. When the block contains mixed device types (e.g., an ethernet veth and a tunnel device), intermediate devices get the wrong mac_header_xmit flag, leading to skb header corruption. In the worst case, skb_push_rcsum with an incorrect mac_len can exhaust headroom and panic. The last device in the loop is handled correctly (line 365-366 uses dev_is_mac_header_xmit(dev_prev)), confirming this is a copy-paste oversight for the intermediate devices. Fix by using dev_prev instead of dev for the mac_header_xmit query, consistent with the device actually being sent to.

In the Linux kernel, the following vulnerability has been resolved: net/sched: netem: fix queue limit check to include reordered packets The queue limit check in netem_enqueue() uses q->t_len which only counts packets in the internal tfifo. Packets placed in sch->q by the reorder path (__qdisc_enqueue_head) are not counted, allowing the total queue occupancy to exceed sch->limit under reordering. Include sch->q.qlen in the limit check.

In the Linux kernel, the following vulnerability has been resolved: crypto: af_alg - Cap AEAD AD length to 0x80000000 In order to prevent arithmetic overflows when checking the TX buffer size, cap the associated data length to 0x80000000.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_ct: fix missing expect put in obj eval nft_ct_expect_obj_eval() allocates an expectation and may call nf_ct_expect_related(), but never drops its local reference. Add nf_ct_expect_put(exp) before return to balance allocation.

In the Linux kernel, the following vulnerability has been resolved: drm/ttm: Fix ttm_bo_swapout() infinite LRU walk on swapout failure When ttm_tt_swapout() fails, the current code calls ttm_resource_add_bulk_move() followed by ttm_resource_move_to_lru_tail() to restore the resource's bulk_move membership. However, ttm_resource_move_to_lru_tail() places the resource at the tail of the LRU list which, relative to the walk cursor's hitch node (placed immediately after the resource when it was yielded), puts the resource *in front of the* the hitch. The next list_for_each_entry_continue() from the hitch finds the same resource again, causing an infinite loop. Fix by deferring del_bulk_move to the success path only. On the success path, TTM_TT_FLAG_SWAPPED has just been set by ttm_tt_swapout() but the resource is still tracked in the bulk_move range, so ttm_resource_del_bulk_move()'s !ttm_resource_unevictable() guard would incorrectly skip the removal. Introduce ttm_resource_del_bulk_move_unevictable() which bypasses that guard.

In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: Bound MIDI endpoint descriptor scans snd_usbmidi_get_ms_info() validates the internal MIDIStreaming endpoint descriptor size before using baAssocJackID[], but the descriptor walker can still return a class-specific endpoint descriptor whose bLength exceeds the remaining bytes in the endpoint-extra scan. That leaves later flexible-array reads bounded by bLength, but not by the remaining bytes in the endpoint-extra scan. Stop walking when bLength is zero or extends past the remaining endpoint-extra scan.

In the Linux kernel, the following vulnerability has been resolved: ceph: fix a buffer leak in __ceph_setxattr() The old_blob in __ceph_setxattr() can store ci->i_xattrs.prealloc_blob value during the retry. However, it is never called the ceph_buffer_put() for the old_blob object. This patch fixes the issue of the buffer leak.

In the Linux kernel, the following vulnerability has been resolved: ceph: fix BUG_ON in __ceph_build_xattrs_blob() due to stale blob size The generic/642 test-case can reproduce the kernel crash: [40243.605254] ------------[ cut here ]------------ [40243.605956] kernel BUG at fs/ceph/xattr.c:918! [40243.607142] Oops: invalid opcode: 0000 [#1] SMP PTI [40243.608067] CPU: 7 UID: 0 PID: 498762 Comm: kworker/7:1 Not tainted 7.0.0-rc7+ #3 PREEMPT(full) [40243.609700] Hardware name: QEMU Ubuntu 25.10 PC v2 (i440FX + PIIX, + 10.1 machine, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [40243.611820] Workqueue: ceph-msgr ceph_con_workfn [40243.612715] RIP: 0010:__ceph_build_xattrs_blob+0x1b8/0x1e0 [40243.613731] Code: 0f 84 82 fe ff ff e9 cf 8e 56 ff 48 8d 65 e8 31 c0 5b 41 5c 41 5d 5d 31 d2 31 c9 31 f6 31 ff 45 31 c0 45 31 c9 c3 cc cc cc cc <0f> 0b 4c 8b 62 08 41 8b 85 24 07 00 00 49 83 c4 04 41 89 44 24 fc [40243.616888] RSP: 0018:ffffcc80c4d4b688 EFLAGS: 00010287 [40243.617773] RAX: 0000000000010026 RBX: 0000000000000001 RCX: 0000000000000000 [40243.618928] RDX: ffff8a773798dee0 RSI: 0000000000000000 RDI: 0000000000000000 [40243.620158] RBP: ffffcc80c4d4b6a0 R08: 0000000000000000 R09: 0000000000000000 [40243.621573] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8a75f3b58000 [40243.622907] R13: ffff8a75f3b58000 R14: 0000000000000080 R15: 000000000000bffd [40243.624054] FS: 0000000000000000(0000) GS:ffff8a787d1b4000(0000) knlGS:0000000000000000 [40243.625331] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [40243.626269] CR2: 000072f390b623c0 CR3: 000000011c02a003 CR4: 0000000000372ef0 [40243.627408] Call Trace: [40243.627839] <TASK> [40243.628188] __prep_cap+0x3fd/0x4a0 [40243.628789] ? do_raw_spin_unlock+0x4e/0xe0 [40243.629474] ceph_check_caps+0x46a/0xc80 [40243.630094] ? __lock_acquire+0x4a2/0x2650 [40243.630773] ? find_held_lock+0x31/0x90 [40243.631347] ? handle_cap_grant+0x79f/0x1060 [40243.632068] ? lock_release+0xd9/0x300 [40243.632696] ? __mutex_unlock_slowpath+0x3e/0x340 [40243.633429] ? lock_release+0xd9/0x300 [40243.634052] handle_cap_grant+0xcf6/0x1060 [40243.634745] ceph_handle_caps+0x122b/0x2110 [40243.635415] mds_dispatch+0x5bd/0x2160 [40243.636034] ? ceph_con_process_message+0x65/0x190 [40243.636828] ? lock_release+0xd9/0x300 [40243.637431] ceph_con_process_message+0x7a/0x190 [40243.638184] ? kfree+0x311/0x4f0 [40243.638749] ? kfree+0x311/0x4f0 [40243.639268] process_message+0x16/0x1a0 [40243.639915] ? sg_free_table+0x39/0x90 [40243.640572] ceph_con_v2_try_read+0xf58/0x2120 [40243.641255] ? lock_acquire+0xc8/0x300 [40243.641863] ceph_con_workfn+0x151/0x820 [40243.642493] process_one_work+0x22f/0x630 [40243.643093] ? process_one_work+0x254/0x630 [40243.643770] worker_thread+0x1e2/0x400 [40243.644332] ? __pfx_worker_thread+0x10/0x10 [40243.645020] kthread+0x109/0x140 [40243.645560] ? __pfx_kthread+0x10/0x10 [40243.646125] ret_from_fork+0x3f8/0x480 [40243.646752] ? __pfx_kthread+0x10/0x10 [40243.647316] ? __pfx_kthread+0x10/0x10 [40243.647919] ret_from_fork_asm+0x1a/0x30 [40243.648556] </TASK> [40243.648902] Modules linked in: overlay hctr2 libpolyval chacha libchacha adiantum libnh libpoly1305 essiv intel_rapl_msr intel_rapl_common intel_uncore_frequency_common skx_edac_common nfit kvm_intel kvm irqbypass joydev ghash_clmulni_intel aesni_intel rapl input_leds mac_hid psmouse vga16fb serio_raw vgastate floppy i2c_piix4 pata_acpi bochs qemu_fw_cfg i2c_smbus sch_fq_codel rbd dm_crypt msr parport_pc ppdev lp parport efi_pstore [40243.654766] ---[ end trace 0000000000000000 ]--- Commit d93231a6bc8a ("ceph: prevent a client from exceeding the MDS maximum xattr size") moved the required_blob_size computation to before the __build_xattrs() call, introducing a race. __build_xattrs() releases and reacquires i_ceph_lock during execution. In that window, handle_cap_grant() may update i_xattrs.blob with a newer MDS-provided blob and bump i_xattrs.version. When __bui ---truncated---

In the Linux kernel, the following vulnerability has been resolved: drm/ttm: Fix ttm_bo_shrink() infinite LRU walk on backup failure Apply the same fix as b2ed01e7ad ("drm/ttm: Fix ttm_bo_swapout() infinite LRU walk on swapout failure") to the ttm_bo_shrink() path. Move del_bulk_move from before the backup to after success only, using ttm_resource_del_bulk_move_unevictable() since the resource is now unevictable once fully backed up.

In the Linux kernel, the following vulnerability has been resolved: net/smc: avoid NULL deref of conn->lnk in smc_msg_event tracepoint The smc_msg_event tracepoint class, shared by smc_tx_sendmsg and smc_rx_recvmsg, unconditionally dereferences smc->conn.lnk: __string(name, smc->conn.lnk->ibname) conn->lnk is only set for SMC-R; for SMC-D it is NULL. Other code on these paths already handles this (e.g. !conn->lnk in SMC_STAT_RMB_TX_SIZE_SMALL()). With the tracepoint enabled, the first sendmsg()/recvmsg() on an SMC-D socket crashes: Oops: general protection fault, probably for non-canonical address KASAN: null-ptr-deref in range [...] RIP: 0010:strlen+0x1e/0xa0 Call Trace: trace_event_raw_event_smc_msg_event (net/smc/smc_tracepoint.h:44) smc_rx_recvmsg (net/smc/smc_rx.c:515) smc_recvmsg (net/smc/af_smc.c:2859) __sys_recvfrom (net/socket.c:2315) __x64_sys_recvfrom (net/socket.c:2326) do_syscall_64 The faulting address 0x3e0 is offsetof(struct smc_link, ibname), confirming the NULL ->lnk deref. Enabling the tracepoint requires root, but the trigger itself is unprivileged: socket(AF_SMC, ...) has no capability check, and SMC-D negotiation needs no admin step on s390 or on x86 with the loopback ISM device loaded. Log an empty device name for SMC-D instead of dereferencing NULL.

In the Linux kernel, the following vulnerability has been resolved: tap: fix stack info leak in tap_ioctl() SIOCGIFHWADDR In the SIOCGIFHWADDR path, tap_ioctl() copies 16 bytes of an uninitialised on-stack struct sockaddr_storage to userspace via ifr_hwaddr, but netif_get_mac_address() only writes sa_family and dev->addr_len (6 for Ethernet) bytes, leaving sa_data[6..13] uninitialised. Those 8 trailing bytes leak kernel stack contents; SIOCGIFHWADDR on a macvtap chardev returns kernel .text and direct-map pointers, defeating KASLR. Initialise ss at declaration.

In the Linux kernel, the following vulnerability has been resolved: crypto: jitterentropy - replace long-held spinlock with mutex jent_kcapi_random() serializes the shared jitterentropy state, but it currently holds a spinlock across the jent_read_entropy() call. That path performs expensive jitter collection and SHA3 conditioning, so parallel readers can trigger stalls as contending waiters spin for the same lock. To prevent non-preemptible lock hold, replace rng->jent_lock with a mutex so contended readers sleep instead of spinning on a shared lock held across expensive entropy generation.

In the Linux kernel, the following vulnerability has been resolved: af_unix: Reject SIOCATMARK on non-stream sockets SIOCATMARK reports whether the receive queue is at the urgent mark for MSG_OOB. In AF_UNIX, MSG_OOB is supported only for SOCK_STREAM sockets. SOCK_DGRAM and SOCK_SEQPACKET reject MSG_OOB in sendmsg() and recvmsg(), so they should not support SIOCATMARK either. Return -EOPNOTSUPP for non-stream sockets before checking the receive queue.

In the Linux kernel, the following vulnerability has been resolved: sctp: fix OOB write to userspace in sctp_getsockopt_peer_auth_chunks sctp_getsockopt_peer_auth_chunks() checks that the caller's optval buffer is large enough for the peer AUTH chunk list with if (len < num_chunks) return -EINVAL; but then writes num_chunks bytes to p->gauth_chunks, which lives at offset offsetof(struct sctp_authchunks, gauth_chunks) == 8 inside optval. The check is missing the sizeof(struct sctp_authchunks) = 8-byte header. When the caller supplies len == num_chunks (for any num_chunks > 0) the test passes but copy_to_user() writes sizeof(struct sctp_authchunks) = 8 bytes past the declared buffer. The sibling function sctp_getsockopt_local_auth_chunks() at the next line already has the correct check: if (len < sizeof(struct sctp_authchunks) + num_chunks) return -EINVAL; Align the peer variant with its sibling. Reproducer confirms on v7.0-13-generic: an unprivileged userspace caller that opens a loopback SCTP association with AUTH enabled, queries num_chunks with a short optval, then issues the real getsockopt with len == num_chunks and sentinel bytes painted past the buffer observes those sentinel bytes overwritten with the peer's AUTH chunk type. The bytes written are under the peer's control but land in the caller's own userspace; this is not a kernel memory corruption, but it is a kernel-side contract violation that can silently corrupt adjacent userspace data.

In the Linux kernel, the following vulnerability has been resolved: vrf: Fix a potential NPD when removing a port from a VRF RCU readers that identified a net device as a VRF port using netif_is_l3_slave() assume that a subsequent call to netdev_master_upper_dev_get_rcu() will return a VRF device. They then continue to dereference its l3mdev operations. This assumption is not always correct and can result in a NPD [1]. There is no RCU synchronization when removing a port from a VRF, so it is possible for an RCU reader to see a new master device (e.g., a bridge) that does not have l3mdev operations. Fix by adding RCU synchronization after clearing the IFF_L3MDEV_SLAVE flag. Skip this synchronization when a net device is removed from a VRF as part of its deletion and when the VRF device itself is deleted. In the latter case an RCU grace period will pass by the time RTNL is released. [1] BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] RIP: 0010:l3mdev_fib_table_rcu (net/l3mdev/l3mdev.c:181) [...] Call Trace: <TASK> l3mdev_fib_table_by_index (net/l3mdev/l3mdev.c:201 net/l3mdev/l3mdev.c:189) __inet_bind (net/ipv4/af_inet.c:499 (discriminator 3)) inet_bind_sk (net/ipv4/af_inet.c:469) __sys_bind (./include/linux/file.h:62 (discriminator 1) ./include/linux/file.h:83 (discriminator 1) net/socket.c:1951 (discriminator 1)) __x64_sys_bind (net/socket.c:1969 (discriminator 1) net/socket.c:1967 (discriminator 1) net/socket.c:1967 (discriminator 1)) do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1)) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)

In the Linux kernel, the following vulnerability has been resolved: fs/mbcache: cancel shrink work before destroying the cache mb_cache_destroy() calls shrinker_free() and then frees all cache entries and the cache itself, but it does not cancel the pending c_shrink_work work item first. If mb_cache_entry_create() schedules c_shrink_work via schedule_work() and the work item is still pending or running when mb_cache_destroy() runs, mb_cache_shrink_worker() will access the cache after its memory has been freed, causing a use-after-free. This is only reachable by a privileged user (root or CAP_SYS_ADMIN) who can trigger the last put of a mounted ext2/ext4/ocfs2 filesystem. Cancel the work item with cancel_work_sync() before calling shrinker_free(), ensuring the worker has finished and will not be rescheduled before the cache is torn down.

In the Linux kernel, the following vulnerability has been resolved: btrfs: fix deadlock between reflink and transaction commit when using flushoncommit When using the flushoncommit mount option, we can have a deadlock between a transaction commit and a reflink operation that copied an inline extent to an offset beyond the current i_size of the destination node. The deadlock happens like this: 1) Task A clones an inline extent from inode X to an offset of inode Y that is beyond Y's current i_size. This means we copied the inline extent's data to a folio of inode Y that is beyond its EOF, using a call to copy_inline_to_page(); 2) Task B starts a transaction commit and calls btrfs_start_delalloc_flush() to flush delalloc; 3) The delalloc flushing sees the new dirty folio of inode Y and when it attempts to flush it, it ends up at extent_writepage() and sees that the offset of the folio is beyond the i_size of inode Y, so it attempts to invalidate the folio by calling folio_invalidate(), which ends up at btrfs' folio invalidate callback - btrfs_invalidate_folio(). There it tries to lock the folio's range in inode Y's extent io tree, but it blocks since it's currently locked by task A - during a reflink we lock the inodes and the source and destination ranges after flushing all delalloc and waiting for ordered extent completion - after that we don't expect to have dirty folios in the ranges, the exception is if we have to copy an inline extent's data (because the destination offset is not zero); 4) Task A then attempts to start a transaction to update the inode item, and then it's blocked since the current transaction is in the TRANS_STATE_COMMIT_START state. Therefore task A has to wait for the current transaction to become unblocked (its state >= TRANS_STATE_UNBLOCKED). So task A is waiting for the transaction commit done by task B, and the later waiting on the extent lock of inode Y that is currently held by task A. Syzbot recently reported this with the following stack traces: INFO: task kworker/u8:7:1053 blocked for more than 143 seconds. Not tainted syzkaller #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u8:7 state:D stack:23520 pid:1053 tgid:1053 ppid:2 task_flags:0x4208060 flags:0x00080000 Workqueue: writeback wb_workfn (flush-btrfs-46) Call Trace: <TASK> context_switch kernel/sched/core.c:5298 [inline] __schedule+0x1553/0x5240 kernel/sched/core.c:6911 __schedule_loop kernel/sched/core.c:6993 [inline] schedule+0x164/0x360 kernel/sched/core.c:7008 wait_extent_bit fs/btrfs/extent-io-tree.c:811 [inline] btrfs_lock_extent_bits+0x59c/0x700 fs/btrfs/extent-io-tree.c:1914 btrfs_lock_extent fs/btrfs/extent-io-tree.h:152 [inline] btrfs_invalidate_folio+0x43d/0xc40 fs/btrfs/inode.c:7704 extent_writepage fs/btrfs/extent_io.c:1852 [inline] extent_write_cache_pages fs/btrfs/extent_io.c:2580 [inline] btrfs_writepages+0x12ff/0x2440 fs/btrfs/extent_io.c:2713 do_writepages+0x32e/0x550 mm/page-writeback.c:2554 __writeback_single_inode+0x133/0x11a0 fs/fs-writeback.c:1750 writeback_sb_inodes+0x995/0x19d0 fs/fs-writeback.c:2042 wb_writeback+0x456/0xb70 fs/fs-writeback.c:2227 wb_do_writeback fs/fs-writeback.c:2374 [inline] wb_workfn+0x41a/0xf60 fs/fs-writeback.c:2414 process_one_work kernel/workqueue.c:3276 [inline] process_scheduled_works+0xb6e/0x18c0 kernel/workqueue.c:3359 worker_thread+0xa53/0xfc0 kernel/workqueue.c:3440 kthread+0x388/0x470 kernel/kthread.c:436 ret_from_fork+0x51e/0xb90 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> INFO: task syz.4.64:6910 blocked for more than 143 seconds. Not tainted syzkaller #0 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:syz.4.64 state:D stack:22752 pid:6910 tgid: ---truncated---

In the Linux kernel, the following vulnerability has been resolved: fsnotify: fix inode reference leak in fsnotify_recalc_mask() fsnotify_recalc_mask() fails to handle the return value of __fsnotify_recalc_mask(), which may return an inode pointer that needs to be released via fsnotify_drop_object() when the connector's HAS_IREF flag transitions from set to cleared. This manifests as a hung task with the following call trace: INFO: task umount:1234 blocked for more than 120 seconds. Call Trace: __schedule schedule fsnotify_sb_delete generic_shutdown_super kill_anon_super cleanup_mnt task_work_run do_exit do_group_exit The race window that triggers the iref leak: Thread A (adding mark) Thread B (removing mark) ────────────────────── ──────────────────────── fsnotify_add_mark_locked(): fsnotify_add_mark_list(): spin_lock(conn->lock) add mark_B(evictable) to list spin_unlock(conn->lock) return /* ---- gap: no lock held ---- */ fsnotify_detach_mark(mark_A): spin_lock(mark_A->lock) clear ATTACHED flag on mark_A spin_unlock(mark_A->lock) fsnotify_put_mark(mark_A) fsnotify_recalc_mask(): spin_lock(conn->lock) __fsnotify_recalc_mask(): /* mark_A skipped: ATTACHED cleared */ /* only mark_B(evictable) remains */ want_iref = false has_iref = true /* not yet cleared */ -> HAS_IREF transitions true -> false -> returns inode pointer spin_unlock(conn->lock) /* BUG: return value discarded! * iput() and fsnotify_put_sb_watched_objects() * are never called */ Fix this by deferring the transition true -> false of HAS_IREF flag from fsnotify_recalc_mask() (Thread A) to fsnotify_put_mark() (thread B).

In the Linux kernel, the following vulnerability has been resolved: greybus: raw: fix use-after-free if write is called after disconnect If a user writes to the chardev after disconnect has been called, the kernel panics with the following trace (with CONFIG_INIT_ON_FREE_DEFAULT_ON=y): BUG: kernel NULL pointer dereference, address: 0000000000000218 ... Call Trace: <TASK> gb_operation_create_common+0x61/0x180 gb_operation_create_flags+0x28/0xa0 gb_operation_sync_timeout+0x6f/0x100 raw_write+0x7b/0xc7 [gb_raw] vfs_write+0xcf/0x420 ? task_mm_cid_work+0x136/0x220 ksys_write+0x63/0xe0 do_syscall_64+0xa4/0x290 entry_SYSCALL_64_after_hwframe+0x77/0x7f Disconnect calls gb_connection_destroy, which ends up freeing the connection object. When gb_operation_sync is called in the write file operations, its gets a freed connection as parameter and the kernel panics. The gb_connection_destroy cannot be moved out of the disconnect function, as the Greybus subsystem expect all connections belonging to a bundle to be destroyed when disconnect returns. To prevent this bug, use a rw lock to synchronize access between write and disconnect. This guarantees that the write function doesn't try to use a disconnected connection.

In the Linux kernel, the following vulnerability has been resolved: ice: fix double-free of tx_buf skb If ice_tso() or ice_tx_csum() fail, the error path in ice_xmit_frame_ring() frees the skb, but the 'first' tx_buf still points to it and is marked as valid (ICE_TX_BUF_SKB). 'next_to_use' remains unchanged, so the potential problem will likely fix itself when the next packet is transmitted and the tx_buf gets overwritten. But if there is no next packet and the interface is brought down instead, ice_clean_tx_ring() -> ice_unmap_and_free_tx_buf() will find the tx_buf and free the skb for the second time. The fix is to reset the tx_buf type to ICE_TX_BUF_EMPTY in the error path, so that ice_unmap_and_free_tx_buf(). Move the initialization of 'first' up, to ensure it's already valid in case we hit the linearization error path. The bug was spotted by AI while I had it looking for something else. It also proposed an initial version of the patch. I reproduced the bug and tested the fix by adding code to inject failures, on a build with KASAN. I looked for similar bugs in related Intel drivers and did not find any.