CVE Feed

In the Linux kernel, the following vulnerability has been resolved: netfilter: nat: use kfree_rcu to release ops Florian Westphal says: "Historically this is not an issue, even for normal base hooks: the data path doesn't use the original nf_hook_ops that are used to register the callbacks. However, in v5.14 I added the ability to dump the active netfilter hooks from userspace. This code will peek back into the nf_hook_ops that are available at the tail of the pointer-array blob used by the datapath. The nat hooks are special, because they are called indirectly from the central nat dispatcher hook. They are currently invisible to the nfnl hook dump subsystem though. But once that changes the nat ops structures have to be deferred too." Update nf_nat_register_fn() to deal with partial exposition of the hooks from error path which can be also an issue for nfnetlink_hook.

In the Linux kernel, the following vulnerability has been resolved: libceph: Fix potential out-of-bounds access in __ceph_x_decrypt() In __ceph_x_decrypt(), a part of the buffer p is interpreted as a ceph_x_encrypt_header, and the magic field of this struct is accessed. This happens without any guarantee that the buffer is large enough to hold this struct. The function parameter ciphertext_len represents the length of the ciphertext to decrypt and is guaranteed to be at most the remaining size of the allocated buffer p. However, this value is not necessarily greater than sizeof(ceph_x_encrypt_header). E.g., a message frame of type FRAME_TAG_AUTH_REPLY_MORE, that is just as long to hold the ciphertext at its end with a ciphertext_len of 8 or less, can trigger an out-of-bounds memory access when accessing hdr->magic. This patch fixes the issue by adding a check to ensure that the decrypted plaintext in the buffer is large enough to represent at least the ceph_x_encrypt_header.

In the Linux kernel, the following vulnerability has been resolved: greybus: raw: fix use-after-free on cdev close This addresses a use-after-free bug when a raw bundle is disconnected but its chardev is still opened by an application. When the application releases the cdev, it causes the following panic when init on free is enabled (CONFIG_INIT_ON_FREE_DEFAULT_ON=y): refcount_t: underflow; use-after-free. WARNING: CPU: 0 PID: 139 at lib/refcount.c:28 refcount_warn_saturate+0xd0/0x130 ... Call Trace: <TASK> cdev_put+0x18/0x30 __fput+0x255/0x2a0 __x64_sys_close+0x3d/0x80 do_syscall_64+0xa4/0x290 entry_SYSCALL_64_after_hwframe+0x77/0x7f The cdev is contained in the "gb_raw" structure, which is freed in the disconnect operation. When the cdev is released at a later time, cdev_put gets an address that points to freed memory. To fix this use-after-free, convert the struct device from a pointer to being embedded, that makes the lifetime of the cdev and of this device the same. Then, use cdev_device_add, which guarantees that the device won't be released until all references to the cdev have been released. Finally, delegate the freeing of the structure to the device release function, instead of freeing immediately in the disconnect callback.

A use-after-free in the gf_filter_pid_inst_swap_delete_task function (/filter_core/filter_pid.c) of GPAC Project/MP4Box before 26.02.0 allows attackers to cause a Denial of Service (DoS) via supplying a crafted media file.

In the Linux kernel, the following vulnerability has been resolved: PCI: use generic driver_override infrastructure When a driver is probed through __driver_attach(), the bus' match() callback is called without the device lock held, thus accessing the driver_override field without a lock, which can cause a UAF. Fix this by using the driver-core driver_override infrastructure taking care of proper locking internally. Note that calling match() from __driver_attach() without the device lock held is intentional. [1]

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: Fix memory leak destroying device All MT76 rx queues have an associated page_pool even if the queue is not associated to a NAPI (e.g. WED RRO queues with WED enabled). Destroy the page_pool running mt76_dma_cleanup routine during module unload. Moreover returns pages to the page pool if WED is not enabled for WED RRO queues.

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: fix potential deadlock in mt7925_roc_abort_sync roc_abort_sync() can deadlock with roc_work(). roc_work() holds dev->mt76.mutex, while cancel_work_sync() waits for roc_work() to finish. If the caller already owns the same mutex, both sides block and no progress is possible. This deadlock can occur during station removal when mt76_sta_state() -> mt76_sta_remove() -> mt7925_mac_sta_remove_link() -> mt7925_mac_link_sta_remove() -> mt7925_roc_abort_sync() invokes cancel_work_sync() while roc_work() is still running and holding dev->mt76.mutex. This avoids the mutex deadlock and preserves exactly-once work ownership.

In the Linux kernel, the following vulnerability has been resolved: bus: fsl-mc: use generic driver_override infrastructure When a driver is probed through __driver_attach(), the bus' match() callback is called without the device lock held, thus accessing the driver_override field without a lock, which can cause a UAF. Fix this by using the driver-core driver_override infrastructure taking care of proper locking internally. Note that calling match() from __driver_attach() without the device lock held is intentional. [1]

In the Linux kernel, the following vulnerability has been resolved: sctp: disable BH before calling udp_tunnel_xmit_skb() udp_tunnel_xmit_skb() / udp_tunnel6_xmit_skb() are expected to run with BH disabled. After commit 6f1a9140ecda ("add xmit recursion limit to tunnel xmit functions"), on the path: udp(6)_tunnel_xmit_skb() -> ip(6)tunnel_xmit() dev_xmit_recursion_inc()/dec() must stay balanced on the same CPU. Without local_bh_disable(), the context may move between CPUs, which can break the inc/dec pairing. This may lead to incorrect recursion level detection and cause packets to be dropped in ip(6)_tunnel_xmit() or __dev_queue_xmit(). Fix it by disabling BH around both IPv4 and IPv6 SCTP UDP xmit paths. In my testing, after enabling the SCTP over UDP: # ip net exec ha sysctl -w net.sctp.udp_port=9899 # ip net exec ha sysctl -w net.sctp.encap_port=9899 # ip net exec hb sysctl -w net.sctp.udp_port=9899 # ip net exec hb sysctl -w net.sctp.encap_port=9899 # ip net exec ha iperf3 -s - without this patch: # ip net exec hb iperf3 -c 192.168.0.1 --sctp [ 5] 0.00-10.00 sec 37.2 MBytes 31.2 Mbits/sec sender [ 5] 0.00-10.00 sec 37.1 MBytes 31.1 Mbits/sec receiver - with this patch: # ip net exec hb iperf3 -c 192.168.0.1 --sctp [ 5] 0.00-10.00 sec 3.14 GBytes 2.69 Gbits/sec sender [ 5] 0.00-10.00 sec 3.14 GBytes 2.69 Gbits/sec receiver

In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: fix use-after-free bugs in mt7996_mac_dump_work() When the mt7996 pci chip is detaching, the mt7996_crash_data is released in mt7996_coredump_unregister(). However, the work item dump_work may still be running or pending, leading to UAF bugs when the already freed crash_data is dereferenced again in mt7996_mac_dump_work(). The race condition can occur as follows: CPU 0 (removal path) | CPU 1 (workqueue) mt7996_pci_remove() | mt7996_sys_recovery_set() mt7996_unregister_device() | mt7996_reset() mt7996_coredump_unregister() | queue_work() vfree(dev->coredump.crash_data) | mt7996_mac_dump_work() | crash_data-> // UAF Fix this by ensuring dump_work is properly canceled before the crash_data is deallocated. Add cancel_work_sync() in mt7996_unregister_device() to synchronize with any pending or executing dump work.

In the Linux kernel, the following vulnerability has been resolved: net: pull headers in qdisc_pkt_len_segs_init() Most ndo_start_xmit() methods expects headers of gso packets to be already in skb->head. net/core/tso.c users are particularly at risk, because tso_build_hdr() does a memcpy(hdr, skb->data, hdr_len); qdisc_pkt_len_segs_init() already does a dissection of gso packets. Use pskb_may_pull() instead of skb_header_pointer() to make sure drivers do not have to reimplement this. Some malicious packets could be fed, detect them so that we can drop them sooner with a new SKB_DROP_REASON_SKB_BAD_GSO drop_reason.

In the Linux kernel, the following vulnerability has been resolved: f2fs: avoid reading already updated pages during GC We found the following issue during fuzz testing: page: refcount:3 mapcount:0 mapping:00000000b6e89c65 index:0x18b2dc pfn:0x161ba9 memcg:f8ffff800e269c00 aops:f2fs_meta_aops ino:2 flags: 0x52880000000080a9(locked|waiters|uptodate|lru|private|zone=1|kasantag=0x4a) raw: 52880000000080a9 fffffffec6e17588 fffffffec0ccc088 a7ffff8067063618 raw: 000000000018b2dc 0000000000000009 00000003ffffffff f8ffff800e269c00 page dumped because: VM_BUG_ON_FOLIO(folio_test_uptodate(folio)) page_owner tracks the page as allocated post_alloc_hook+0x58c/0x5ec prep_new_page+0x34/0x284 get_page_from_freelist+0x2dcc/0x2e8c __alloc_pages_noprof+0x280/0x76c __folio_alloc_noprof+0x18/0xac __filemap_get_folio+0x6bc/0xdc4 pagecache_get_page+0x3c/0x104 do_garbage_collect+0x5c78/0x77a4 f2fs_gc+0xd74/0x25f0 gc_thread_func+0xb28/0x2930 kthread+0x464/0x5d8 ret_from_fork+0x10/0x20 ------------[ cut here ]------------ kernel BUG at mm/filemap.c:1563! folio_end_read+0x140/0x168 f2fs_finish_read_bio+0x5c4/0xb80 f2fs_read_end_io+0x64c/0x708 bio_endio+0x85c/0x8c0 blk_update_request+0x690/0x127c scsi_end_request+0x9c/0xb8c scsi_io_completion+0xf0/0x250 scsi_finish_command+0x430/0x45c scsi_complete+0x178/0x6d4 blk_mq_complete_request+0xcc/0x104 scsi_done_internal+0x214/0x454 scsi_done+0x24/0x34 which is similar to the problem reported by syzbot: https://syzkaller.appspot.com/bug?extid=3686758660f980b402dc This case is consistent with the description in commit 9bf1a3f ("f2fs: avoid GC causing encrypted file corrupted"): Page 1 is moved from blkaddr A to blkaddr B by move_data_block, and after being written it is marked as uptodate. Then, Page 1 is moved from blkaddr B to blkaddr C, VM_BUG_ON_FOLIO was triggered in the endio initiated by ra_data_block. There is no need to read Page 1 again from blkaddr B, since it has already been updated. Therefore, avoid initiating I/O in this case.

In the Linux kernel, the following vulnerability has been resolved: bpf: Enforce regsafe base id consistency for BPF_ADD_CONST scalars When regsafe() compares two scalar registers that both carry BPF_ADD_CONST, check_scalar_ids() maps their full compound id (aka base | BPF_ADD_CONST flag) as one idmap entry. However, it never verifies that the underlying base ids, that is, with the flag stripped are consistent with existing idmap mappings. This allows construction of two verifier states where the old state has R3 = R2 + 10 (both sharing base id A) while the current state has R3 = R4 + 10 (base id C, unrelated to R2). The idmap creates two independent entries: A->B (for R2) and A|flag->C|flag (for R3), without catching that A->C conflicts with A->B. State pruning then incorrectly succeeds. Fix this by additionally verifying base ID mapping consistency whenever BPF_ADD_CONST is set: after mapping the compound ids, also invoke check_ids() on the base IDs (flag bits stripped). This ensures that if A was already mapped to B from comparing the source register, any ADD_CONST derivative must also derive from B, not an unrelated C.

In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - copy IV using skcipher ivsize AF_ALG rfc3686-ctr-aes-ccp requests pass an 8-byte IV to the driver. ccp_aes_complete() restores AES_BLOCK_SIZE bytes into the caller's IV buffer while RFC3686 skciphers expose an 8-byte IV, so the restore overruns the provided buffer. Use crypto_skcipher_ivsize() to copy only the algorithm's IV length.

In the Linux kernel, the following vulnerability has been resolved: net/sched: taprio: fix use-after-free in advance_sched() on schedule switch In advance_sched(), when should_change_schedules() returns true, switch_schedules() is called to promote the admin schedule to oper. switch_schedules() queues the old oper schedule for RCU freeing via call_rcu(), but 'next' still points into an entry of the old oper schedule. The subsequent 'next->end_time = end_time' and rcu_assign_pointer(q->current_entry, next) are use-after-free. Fix this by selecting 'next' from the new oper schedule immediately after switch_schedules(), and using its pre-calculated end_time. setup_first_end_time() sets the first entry's end_time to base_time + interval when the schedule is installed, so the value is already correct. The deleted 'end_time = sched_base_time(admin)' assignment was also harmful independently: it would overwrite the new first entry's pre-calculated end_time with just base_time.

In the Linux kernel, the following vulnerability has been resolved: tipc: fix double-free in tipc_buf_append() tipc_msg_validate() can potentially reallocate the skb it is validating, freeing the old one. In tipc_buf_append(), it was being called with a pointer to a local variable which was a copy of the caller's skb pointer. If the skb was reallocated and validation subsequently failed, the error handling path would free the original skb pointer, which had already been freed, leading to double-free. Fix this by checking if head now points to a newly allocated reassembled skb. If it does, reassign *headbuf for later freeing operations.

In the Linux kernel, the following vulnerability has been resolved: iommu/vt-d: Fix oops due to out of scope access Below oops triggers when kill QEMU process: Oops: general protection fault, probably for non-canonical address 0x7fffffff844eaaa7: 0000 [#1] SMP NOPTI Call Trace: <TASK> do_raw_spin_lock+0xaa/0xc0 _raw_spin_lock_irqsave+0x21/0x40 domain_remove_dev_pasid+0x52/0x160 intel_nested_set_dev_pasid+0x1b9/0x1e0 __iommu_set_group_pasid+0x56/0x120 pci_dev_reset_iommu_done+0xe3/0x180 pcie_flr+0x65/0x160 __pci_reset_function_locked+0x5b/0x120 vfio_pci_core_close_device+0x63/0xe0 [vfio_pci_core] vfio_df_close+0x4f/0xa0 vfio_df_unbind_iommufd+0x2d/0x60 vfio_device_fops_release+0x3e/0x40 __fput+0xe5/0x2c0 task_work_run+0x58/0xa0 do_exit+0x2c8/0x600 do_group_exit+0x2f/0xa0 get_signal+0x863/0x8c0 arch_do_signal_or_restart+0x24/0x100 exit_to_user_mode_loop+0x87/0x380 do_syscall_64+0x2ff/0x11e0 entry_SYSCALL_64_after_hwframe+0x76/0x7e The global static blocked domain is a dummy domain without corresponding dmar_domain structure, accessing beyond iommu_domain structure triggers oops easily. Fix it by return early in domain_remove_dev_pasid() like identity domain.

In the Linux kernel, the following vulnerability has been resolved: dm cache policy smq: fix missing locks in invalidating cache blocks In passthrough mode, the policy invalidate_mapping operation is called simultaneously from multiple workers, thus it should be protected by a lock. Otherwise, we might end up with data races on the allocated blocks counter, or even use-after-free issues with internal data structures when doing concurrent writes. Note that the existing FIXME in smq_invalidate_mapping() doesn't affect passthrough mode since migration tasks don't exist there, but would need attention if supporting fast device shrinking via suspend/resume without target reloading. Reproduce steps: 1. Create a cache device consisting of 1024 cache entries dmsetup create cmeta --table "0 8192 linear /dev/sdc 0" dmsetup create cdata --table "0 131072 linear /dev/sdc 8192" dmsetup create corig --table "0 262144 linear /dev/sdc 262144" dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct dmsetup create cache --table "0 262144 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0" 2. Populate the cache, and record the number of cached blocks fio --name=populate --filename=/dev/mapper/cache --rw=randwrite --bs=4k \ --size=64m --direct=1 nr_cached=$(dmsetup status cache | awk '{split($7, a, "/"); print a[1]}') 3. Reload the cache into passthrough mode dmsetup suspend cache dmsetup reload cache --table "0 262144 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 passthrough smq 0" dmsetup resume cache 4. Write to the passthrough cache. By setting multiple jobs with I/O size equal to the cache block size, cache blocks are invalidated concurrently from different workers. fio --filename=/dev/mapper/cache --name=test --rw=randwrite --bs=64k \ --direct=1 --numjobs=2 --randrepeat=0 --size=64m 5. Check if demoted matches cached block count. These numbers should match but may differ due to the data race. nr_demoted=$(dmsetup status cache | awk '{print $12}') echo "$nr_cached, $nr_demoted"

In the Linux kernel, the following vulnerability has been resolved: bpf: Validate node_id in arena_alloc_pages() arena_alloc_pages() accepts a plain int node_id and forwards it through the entire allocation chain without any bounds checking. Validate node_id before passing it down the allocation chain in arena_alloc_pages().

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: join hook list via splice_list_rcu() in commit phase Publish new hooks in the list into the basechain/flowtable using splice_list_rcu() to ensure netlink dump list traversal via rcu is safe while concurrent ruleset update is going on.

In the Linux kernel, the following vulnerability has been resolved: libceph: handle rbtree insertion error in decode_choose_args() A message of type CEPH_MSG_OSD_MAP contains an OSD map that itself contains a CRUSH map. The received CRUSH map may optionally contain choose_args that get decoded in decode_choose_args(). In this function, num_choose_arg_maps is read from the message, and a corresponding number of crush_choose_arg_maps gets decoded afterwards. Each crush_choose_arg_map has a choose_args_index, which serves as the key when inserting it into the choose_args rbtree of the decoded crush_map. If a (potentially corrupted) message contains two crush_choose_arg_maps with the same index, the assertion in insert_choose_arg_map() triggers a kernel BUG when trying to insert the second crush_choose_arg_map. This patch fixes the issue by switching to the non-asserting rbtree insertion function and rejecting the message if the insertion fails. [ idryomov: changelog ]

In the Linux kernel, the following vulnerability has been resolved: Revert "wireguard: device: enable threaded NAPI" This reverts commit 933466fc50a8e4eb167acbd0d8ec96a078462e9c which is commit db9ae3b6b43c79b1ba87eea849fd65efa05b4b2e upstream. We have had three independent production user reports in combination with Cilium utilizing WireGuard as encryption underneath that k8s Pod E/W traffic to certain peer nodes fully stalled. The situation appears as follows: - Occurs very rarely but at random times under heavy networking load. - Once the issue triggers the decryption side stops working completely for that WireGuard peer, other peers keep working fine. The stall happens also for newly initiated connections towards that particular WireGuard peer. - Only the decryption side is affected, never the encryption side. - Once it triggers, it never recovers and remains in this state, the CPU/mem on that node looks normal, no leak, busy loop or crash. - bpftrace on the affected system shows that wg_prev_queue_enqueue fails, thus the MAX_QUEUED_PACKETS (1024 skbs!) for the peer's rx_queue is reached. - Also, bpftrace shows that wg_packet_rx_poll for that peer is never called again after reaching this state for that peer. For other peers wg_packet_rx_poll does get called normally. - Commit db9ae3b ("wireguard: device: enable threaded NAPI") switched WireGuard to threaded NAPI by default. The default has not been changed for triggering the issue, neither did CPU hotplugging occur (i.e. 5bd8de2 ("wireguard: queueing: always return valid online CPU in wg_cpumask_choose_online()")). - The issue has been observed with stable kernels of v5.15 as well as v6.1. It was reported to us that v5.10 stable is working fine, and no report on v6.6 stable either (somewhat related discussion in [0] though). - In the WireGuard driver the only material difference between v5.10 stable and v5.15 stable is the switch to threaded NAPI by default. [0] https://lore.kernel.org/netdev/CA+wXwBTT74RErDGAnj98PqS=wvdh8eM1pi4q6tTdExtjnokKqA@mail.gmail.com/ Breakdown of the problem: 1) skbs arriving for decryption are enqueued to the peer->rx_queue in wg_packet_consume_data via wg_queue_enqueue_per_device_and_peer. 2) The latter only moves the skb into the MPSC peer queue if it does not surpass MAX_QUEUED_PACKETS (1024) which is kept track in an atomic counter via wg_prev_queue_enqueue. 3) In case enqueueing was successful, the skb is also queued up in the device queue, round-robin picks a next online CPU, and schedules the decryption worker. 4) The wg_packet_decrypt_worker, once scheduled, picks these up from the queue, decrypts the packets and once done calls into wg_queue_enqueue_per_peer_rx. 5) The latter updates the state to PACKET_STATE_CRYPTED on success and calls napi_schedule on the per peer->napi instance. 6) NAPI then polls via wg_packet_rx_poll. wg_prev_queue_peek checks on the peer->rx_queue. It will wg_prev_queue_dequeue if the queue->peeked skb was not cached yet, or just return the latter otherwise. (wg_prev_queue_drop_peeked later clears the cache.) 7) From an ordering perspective, the peer->rx_queue has skbs in order while the device queue with the per-CPU worker threads from a global ordering PoV can finish the decryption and signal the skb PACKET_STATE_CRYPTED out of order. 8) A situation can be observed that the first packet coming in will be stuck waiting for the decryption worker to be scheduled for a longer time when the system is under pressure. 9) While this is the case, the other CPUs in the meantime finish decryption and call into napi_schedule. 10) Now in wg_packet_rx_poll it picks up the first in-order skb from the peer->rx_queue and sees that its state is still PACKET_STATE_UNCRYPTED. The NAPI poll routine then exits e ---truncated---

In the Linux kernel, the following vulnerability has been resolved: xfrm: espintcp: do not reuse an in-progress partial send espintcp keeps a single in-flight transmit in ctx->partial. Before building a new sk_msg, espintcp_sendmsg() first tries to flush that state through espintcp_push_msgs(). For blocking callers, espintcp_push_msgs() may return success even when the previous partial send is still pending. espintcp_sendmsg() would then reinitialize emsg->skmsg and reuse ctx->partial while the old transfer still owns that state. Do not rebuild the send message when ctx->partial is still in progress. If espintcp_push_msgs() returns with emsg->len still set, fail the new send instead of overwriting the live partial state. This is a memory-safety fix: reusing the live partial-send state can leave a stale offset attached to a new sk_msg and lead to an out-of- bounds read in the send path. tcp_sendmsg_locked() already handles waiting for send buffer memory, so the fix here is just to preserve espintcp's one-message-at-a-time transmit state.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: serialize accept_q access bt_sock_poll() walks the accept queue without synchronization, while child teardown can unlink the same socket and drop its last reference. The unsynchronized accept queue walk has existed since the initial Bluetooth import. Protect accept_q with a dedicated lock for queue updates and polling. Also rework bt_accept_dequeue() to take temporary child references under the queue lock before dropping it and locking the child socket.

In the Linux kernel, the following vulnerability has been resolved: sctp: diag: reject stale associations in dump_one path The SCTP exact sock_diag lookup can hold a transport reference, block on lock_sock(sk), and then resume after sctp_association_free() has marked the association dead and freed its bind address list. When that happens, inet_assoc_attr_size() and inet_diag_msg_sctpasoc_fill() can still dereference association state that is no longer valid for reporting. In particular, inet_diag_msg_sctpasoc_fill() may read an empty bind-address list as a real sctp_sockaddr_entry and trigger an out-of-bounds read from unrelated association memory. Reject the association after taking the socket lock if it has been reaped or detached from the endpoint, and report the lookup as stale. This keeps the exact dump-one path from formatting torn association state.

In the Linux kernel, the following vulnerability has been resolved: batman-adv: fix fragment reassembly length accounting batman-adv keeps a running payload length for queued fragments and uses it to validate a fragment chain before reassembly. That accounting currently allows the accumulated fragment length to be truncated during updates. As a result, malformed fragment chains can bypass the intended validation and drive reassembly with inconsistent length state, leading to a local denial of service. Fix the accounting by storing the accumulated length in a length-typed field and rejecting update overflows before the existing validation logic runs. The fix was verified against the original reproducer and against valid fragment reassembly paths.

In the Linux kernel, the following vulnerability has been resolved: bpf: Fix stale offload->prog pointer after constant blinding When a dev-bound-only BPF program (BPF_F_XDP_DEV_BOUND_ONLY) undergoes JIT compilation with constant blinding enabled (bpf_jit_harden >= 2), bpf_jit_blind_constants() clones the program. The original prog is then freed in bpf_jit_prog_release_other(), which updates aux->prog to point to the surviving clone, but fails to update offload->prog. This leaves offload->prog pointing to the freed original program. When the network namespace is subsequently destroyed, cleanup_net() triggers bpf_dev_bound_netdev_unregister(), which iterates ondev->progs and calls __bpf_prog_offload_destroy(offload->prog). Accessing the freed prog causes a page fault: BUG: unable to handle page fault for address: ffffc900085f1038 Workqueue: netns cleanup_net RIP: 0010:__bpf_prog_offload_destroy+0xc/0x80 Call Trace: __bpf_offload_dev_netdev_unregister+0x257/0x350 bpf_dev_bound_netdev_unregister+0x4a/0x90 unregister_netdevice_many_notify+0x2a2/0x660 ... cleanup_net+0x21a/0x320 The test sequence that triggers this reliably is: 1. Set net.core.bpf_jit_harden=2 (echo 2 > /proc/sys/net/core/bpf_jit_harden) 2. Run xdp_metadata selftest, which creates a dev-bound-only XDP program on a veth inside a netns (./test_progs -t xdp_metadata) 3. cleanup_net -> page fault in __bpf_prog_offload_destroy Dev-bound-only programs are unique in that they have an offload structure but go through the normal JIT path instead of bpf_prog_offload_compile(). This means they are subject to constant blinding's prog clone-and-replace, while also having offload->prog that must stay in sync. Fix this by updating offload->prog in bpf_jit_prog_release_other(), alongside the existing aux->prog update. Both are back-pointers to the prog that must be kept in sync when the prog is replaced.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: fix locking in hci_conn_request_evt() with HCI_PROTO_DEFER When protocol sets HCI_PROTO_DEFER, hci_conn_request_evt() calls hci_connect_cfm(conn) without hdev->lock. Generally hci_connect_cfm() assumes it is held, and if conn is deleted concurrently -> UAF. Only SCO and ISO set HCI_PROTO_DEFER and only for defer setup listen, and HCI_EV_CONN_REQUEST is not generated for ISO. In the non-deferred listening socket code paths, hci_connect_cfm(conn) is called with hdev->lock held. Fix by holding the lock.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: l2cap: Add missing chan lock in l2cap_ecred_reconf_rsp l2cap_ecred_reconf_rsp() calls l2cap_chan_del() without holding l2cap_chan_lock(). Every other l2cap_chan_del() caller in the file acquires the lock first. A remote BLE device can send a crafted L2CAP ECRED reconfiguration response to corrupt the channel list while another thread is iterating it. Add l2cap_chan_hold() and l2cap_chan_lock() before l2cap_chan_del(), and l2cap_chan_unlock() and l2cap_chan_put() after, matching the pattern used in l2cap_ecred_conn_rsp() and l2cap_conn_del().

In the Linux kernel, the following vulnerability has been resolved: sched/psi: fix race between file release and pressure write A potential race condition exists between pressure write and cgroup file release regarding the priv member of struct kernfs_open_file, which triggers the uaf reported in [1]. Consider the following scenario involving execution on two separate CPUs: CPU0 CPU1 ==== ==== vfs_rmdir() kernfs_iop_rmdir() cgroup_rmdir() cgroup_kn_lock_live() cgroup_destroy_locked() cgroup_addrm_files() cgroup_rm_file() kernfs_remove_by_name() kernfs_remove_by_name_ns() vfs_write() __kernfs_remove() new_sync_write() kernfs_drain() kernfs_fop_write_iter() kernfs_drain_open_files() cgroup_file_write() kernfs_release_file() pressure_write() cgroup_file_release() ctx = of->priv; kfree(ctx); of->priv = NULL; cgroup_kn_unlock() cgroup_kn_lock_live() cgroup_get(cgrp) cgroup_kn_unlock() if (ctx->psi.trigger) // here, trigger uaf for ctx, that is of->priv The cgroup_rmdir() is protected by the cgroup_mutex, it also safeguards the memory deallocation of of->priv performed within cgroup_file_release(). However, the operations involving of->priv executed within pressure_write() are not entirely covered by the protection of cgroup_mutex. Consequently, if the code in pressure_write(), specifically the section handling the ctx variable executes after cgroup_file_release() has completed, a uaf vulnerability involving of->priv is triggered. Therefore, the issue can be resolved by extending the scope of the cgroup_mutex lock within pressure_write() to encompass all code paths involving of->priv, thereby properly synchronizing the race condition occurring between cgroup_file_release() and pressure_write(). And, if an live kn lock can be successfully acquired while executing the pressure write operation, it indicates that the cgroup deletion process has not yet reached its final stage; consequently, the priv pointer within open_file cannot be NULL. Therefore, the operation to retrieve the ctx value must be moved to a point *after* the live kn lock has been successfully acquired. In another situation, specifically after entering cgroup_kn_lock_live() but before acquiring cgroup_mutex, there exists a different class of race condition: CPU0: write memory.pressure CPU1: write cgroup.pressure=0 =========================== ============================= kernfs_fop_write_iter() kernfs_get_active_of(of) pressure_write() cgroup_kn_lock_live(memory.pressure) cgroup_tryget(cgrp) kernfs_break_active_protection(kn) ... blocks on cgroup_mutex cgroup_pressure_write() cgroup_kn_lock_live(cgroup.pressure) cgroup_file_show(memory.pressure, false) kernfs_show(false) kernfs_drain_open_files() cgroup_file_release(of) kfree(ctx) of->priv = NULL cgroup_kn_unlock() ... acquires cgroup_mutex ctx = of->priv; // may now be NULL if (ctx->psi.trigger) // NULL dereference Consequently, there is a possibility that of->priv is NULL, the pressure write needs to check for this. Now that the scope of the cgroup_mutex has been expanded, the original explicit cgroup_get/put operations are no longer necessary, this is because acquiring/releasing the live kn lock inherently executes a cgroup get/put operation. [1] BUG: KASAN: slab-use-after-free in pressure_write+0xa4/0x210 kernel/cgroup/cgroup.c:4011 Call Trace: pressure_write+0xa4/0x210 kernel/cgroup/cgroup.c:4011 cgroup_file_write+0x36f/0x790 kernel/cgroup/cgroup.c:43 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: libceph: Fix potential null-ptr-deref in decode_choose_args() A message of type CEPH_MSG_OSD_MAP contains an OSD map that itself contains a CRUSH map. When decoding this CRUSH map in crush_decode(), an array of max_buckets CRUSH buckets is decoded, where some indices may not refer to actual buckets and are therefore set to NULL. The received CRUSH map may optionally contain choose_args that get decoded in decode_choose_args(). When decoding a crush_choose_arg_map, a series of choose_args for different buckets is decoded, with the bucket_index being read from the incoming message. It is only checked that the bucket index does not exceed max_buckets, but not that it doesn't point to an index with a NULL bucket. If a (potentially corrupted) message contains a crush_choose_arg_map including such a bucket_index, a null pointer dereference may occur in the subsequent processing when attempting to access the bucket with the given index. This patch fixes the issue by extending the affected check. Now, it is only attempted to access the bucket if it is not NULL.

In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_policy: fix strict mode inbound policy matching match_policy_in() walks sec_path entries from the last transform to the first one, but strict policy matching needs to consume info->pol[] in the same forward order as the rule layout. Derive the strict-match policy position from the number of transforms already consumed so that multi-element inbound rules are matched consistently.

In the Linux kernel, the following vulnerability has been resolved: net: skbuff: fix missing zerocopy reference in pskb_carve helpers pskb_carve_inside_header() and pskb_carve_inside_nonlinear() both copy the old skb_shared_info header into a new buffer via memcpy(), which includes the destructor_arg pointer (uarg) for MSG_ZEROCOPY skbs. Neither function calls net_zcopy_get() for the new shinfo, creating an unaccounted holder: every skb_shared_info with destructor_arg set will call skb_zcopy_clear() once when freed, but the corresponding net_zcopy_get() was never called for the new copy. Repeated calls drive uarg->refcnt to zero prematurely, freeing ubuf_info_msgzc while TX skbs still hold live destructor_arg pointers. KASAN reports use-after-free on a freed ubuf_info_msgzc: BUG: KASAN: slab-use-after-free in skb_release_data+0x77b/0x810 Read of size 8 at addr ffff88801574d3e8 by task poc/220 Call Trace: skb_release_data+0x77b/0x810 kfree_skb_list_reason+0x13e/0x610 skb_release_data+0x4cd/0x810 sk_skb_reason_drop+0xf3/0x340 skb_queue_purge_reason+0x282/0x440 rds_tcp_inc_free+0x1e/0x30 rds_recvmsg+0x354/0x1780 __sys_recvmsg+0xdf/0x180 Allocated by task 219: msg_zerocopy_realloc+0x157/0x7b0 tcp_sendmsg_locked+0x2892/0x3ba0 Freed by task 219: ip_recv_error+0x74a/0xb10 tcp_recvmsg+0x475/0x530 The skb consuming the late access still referenced the same uarg via shinfo->destructor_arg copied by pskb_carve_inside_nonlinear() without a refcount bump. This has been verified to be reliably exploitable: a working proof-of-concept achieves full root privilege escalation from an unprivileged local user on a default kernel configuration. The fix follows the pattern of pskb_expand_head() which has the same memcpy/cloned structure. For pskb_carve_inside_header(), net_zcopy_get() is placed after skb_orphan_frags() succeeds, so the orphan error path needs no cleanup. For pskb_carve_inside_nonlinear(), net_zcopy_get() is placed after all failure points and just before skb_release_data(), so no error path needs cleanup at all -- matching pskb_expand_head() more closely and avoiding the need for a balancing net_zcopy_put().

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_sip: don't use simple_strtoul Replace unsafe port parsing in epaddr_len(), ct_sip_parse_header_uri(), and ct_sip_parse_request() with a new sip_parse_port() helper that validates each digit against the buffer limit, eliminating the use of simple_strtoul() which assumes NUL-terminated strings. The previous code dereferenced pointers without bounds checks after sip_parse_addr() and relied on simple_strtoul() on non-NUL-terminated skb data. A port that reaches the buffer limit without a trailing character is also rejected as malformed. Also get rid of all simple_strtoul() usage in conntrack, prefer a stricter version instead. There are intentional changes: - Bail out if number is > UINT_MAX and indicate a failure, same for too long sequences. While we do accept 05535 as port 5535, we will not accept e.g. 'sip:10.0.0.1:005060'. While its syntactically valid under RFC 3261, we should restrict this to not waste cycles when presented with malformed packets with 64k '0' characters. - Force base 10 in ct_sip_parse_numerical_param(). This is used to fetch 'expire=' and 'rports='; both are expected to use base-10. - In nf_nat_sip.c, only accept the parsed value if its within the 1k-64k range. - epaddr_len now returns 0 if the port is invalid, as it already does for invalid ip addresses. This is intentional. nf_conntrack_sip performs lots of guesswork to find the right parts of the message to parse. Being stricter could break existing setups. Connection tracking helpers are designed to allow traffic to pass, not to block it. Based on an earlier patch from Jenny Guanni Qu <[email protected]>.

In the Linux kernel, the following vulnerability has been resolved: fs/fcntl: fix SOFTIRQ-unsafe lock order in fasync signaling A SOFTIRQ-safe to SOFTIRQ-unsafe lock order deadlock can occur in send_sigio() and send_sigurg() when a process group receives a signal. When FASYNC is configured for a process group (PIDTYPE_PGID), both functions use read_lock(&tasklist_lock) to traverse the task list. However, they are frequently called from softirq context: - send_sigio() via input_inject_event -> kill_fasync - send_sigurg() via tcp_check_urg -> sk_send_sigurg (NET_RX_SOFTIRQ) The deadlock is caused by the rwlock writer fairness mechanism: 1. CPU 0 (process context) holds read_lock(&tasklist_lock) in do_wait(). 2. CPU 1 (process context) attempts write_lock(&tasklist_lock) in fork() or exit() and spins, which blocks all new readers. 3. CPU 0 is interrupted by a softirq (e.g., TCP URG packet reception). 4. The softirq calls send_sigurg() and attempts to acquire read_lock(&tasklist_lock), deadlocking because CPU 1 is waiting. Since PID hashing and do_each_pid_task() traversals are already RCU-protected, the read_lock on tasklist_lock is no longer strictly required for safe traversal. Fix this by replacing tasklist_lock with rcu_read_lock(), aligning the process group signaling path with the single-PID path. This also mitigates a potential remote denial of service vector via TCP URG packets. Lockdep splat: ===================================================== WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected [...] Chain exists of: &dev->event_lock --> &f_owner->lock --> tasklist_lock Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(tasklist_lock); local_irq_disable(); lock(&dev->event_lock); lock(&f_owner->lock); <Interrupt> lock(&dev->event_lock); *** DEADLOCK ***

In the Linux kernel, the following vulnerability has been resolved: ipc: limit next_id allocation to the valid ID range The checkpoint/restore sysctl path can request the next SysV IPC id through ids->next_id. ipc_idr_alloc() currently forwards that request to idr_alloc() with an open-ended upper bound. If the valid tail of the SysV IPC id space is full, the allocation can spill beyond ipc_mni. The returned SysV IPC id still uses the normal index encoding, so later lookup and removal can target the wrong slot. This leaves the real IDR entry behind and breaks the IDR state for the object. The bug is in ipc_idr_alloc() in the checkpoint/restore path. 1. ids->next_id is passed to: idr_alloc(&ids->ipcs_idr, new, ipcid_to_idx(next_id), 0, ...) 2. The zero upper bound makes the allocation effectively open-ended. Once the valid SysV IPC tail is occupied, idr_alloc() can spill past ipc_mni and allocate an entry beyond the valid IPC id range. 3. The new object id is still encoded with the narrower SysV IPC index width: new->id = (new->seq << ipcmni_seq_shift()) + idx 4. Later removal goes through ipc_rmid(), which uses: ipcid_to_idx(ipcp->id) That truncates the real IDR index. An object actually stored at a high index can then be removed as if it lived at a low in-range index. 5. For shared memory, shm_destroy() frees the current object anyway, but the real high IDR slot is left behind as a dangling pointer. 6. A subsequent walk of /proc/sysvipc/shm reaches the stale IDR entry and dereferences freed memory. Prevent this by bounding the requested allocation to ipc_mni so the checkpoint/restore path fails once the valid range is exhausted.

In the Linux kernel, the following vulnerability has been resolved: ipv6: fix possible UAF in icmpv6_rcv() Caching saddr and daddr before pskb_pull() is problematic since skb->head can change. Remove these temporary variables: - We only access &ipv6_hdr(skb)->saddr and &ipv6_hdr(skb)->daddr when net_dbg_ratelimited() is called in the slow path. - Avoid potential future misuse after pskb_pull() call.

In the Linux kernel, the following vulnerability has been resolved: powerpc/64s: Fix unmap race with PMD migration entries The following race is possible with migration swap entries or device-private THP entries. e.g. when move_pages is called on a PMD THP page, then there maybe an intermediate state, where PMD entry acts as a migration swap entry (pmd_present() is true). Then if an munmap happens at the same time, then this VM_BUG_ON() can happen in pmdp_huge_get_and_clear_full(). This patch fixes that. Thread A: move_pages() syscall add_folio_for_migration() mmap_read_lock(mm) folio_isolate_lru(folio) mmap_read_unlock(mm) do_move_pages_to_node() migrate_pages() try_to_migrate_one() spin_lock(ptl) set_pmd_migration_entry() pmdp_invalidate() # PMD: _PAGE_INVALID | _PAGE_PTE | pfn set_pmd_at() # PMD: migration swap entry (pmd_present=0) spin_unlock(ptl) [page copy phase] # <--- RACE WINDOW --> Thread B: munmap() mmap_write_downgrade(mm) unmap_vmas() -> zap_pmd_range() zap_huge_pmd() __pmd_trans_huge_lock() pmd_is_huge(): # !pmd_present && !pmd_none -> TRUE (swap entry) pmd_lock() -> # spin_lock(ptl), waits for Thread A to release ptl pmdp_huge_get_and_clear_full() VM_BUG_ON(!pmd_present(*pmdp)) # HITS! [ 287.738700][ T1867] ------------[ cut here ]------------ [ 287.743843][ T1867] kernel BUG at arch/powerpc/mm/book3s64/pgtable.c:187! cpu 0x0: Vector: 700 (Program Check) at [c00000044037f4f0] pc: c000000000094ca4: pmdp_huge_get_and_clear_full+0x6c/0x23c lr: c000000000645dec: zap_huge_pmd+0xb0/0x868 sp: c00000044037f790 msr: 800000000282b033 current = 0xc0000004032c1a00 paca = 0xc000000004fe0000 irqmask: 0x03 irq_happened: 0x09 pid = 1867, comm = a.out kernel BUG at :187! Linux version 6.19.0-12136-g14360d4f917c-dirty (powerpc64le-linux-gnu-gcc (Debian 12.2.0-14) 12.2.0, GNU ld (GNU Binutils for Debian) 2.40) #27 SMP PREEMPT Sun Feb 22 10:38:56 IST 2026 enter ? for help [link register ] c000000000645dec zap_huge_pmd+0xb0/0x868 [c00000044037f790] c00000044037f7d0 (unreliable) [c00000044037f7d0] c000000000645dcc zap_huge_pmd+0x90/0x868 [c00000044037f840] c0000000005724cc unmap_page_range+0x176c/0x1f40 [c00000044037fa00] c000000000572ea0 unmap_vmas+0xb0/0x1d8 [c00000044037fa90] c0000000005af254 unmap_region+0xb4/0x128 [c00000044037fb50] c0000000005af400 vms_complete_munmap_vmas+0x138/0x310 [c00000044037fbe0] c0000000005b0f1c do_vmi_align_munmap+0x1ec/0x238 [c00000044037fd30] c0000000005b3688 __vm_munmap+0x170/0x1f8 [c00000044037fdf0] c000000000587f74 sys_munmap+0x2c/0x40 [c00000044037fe10] c000000000032668 system_call_exception+0x128/0x350 [c00000044037fe50] c00000000000d05c system_call_vectored_common+0x15c/0x2ec ---- Exception: 3000 (System Call Vectored) at 0000000010064a2c SP (7fff9b1ee9c0) is in userspace 0:mon> zh commit a30b48bf1b24 ("mm/migrate_device: implement THP migration of zone device pages"), enabled migration for device-private PMD entries. Hence this is one other path where this warning could get trigger from. ------------[ cut here ]------------ WARNING: arch/powerpc/mm/book3s64/hash_pgtable.c:199 at hash__pmd_hugepage_update+0x48/0x284, CPU#3: hmm-tests/1905 Modules linked in: test_hmm CPU: 3 UID: 0 PID: 1905 Comm: hmm-tests Tainted: G B W L N 7.0.0-rc1-01438-g7e2f0ee7581c #21 PREEMPT Tainted: [B]=BAD_PAGE, [W]=WARN, [L]=SOFTLOCKUP, [N]=TEST Hardware name: IBM pSeries (emulated by qemu) POWER10 (architected) 0x801200 0xf000006 of:SLOF,git-ee03ae pSeries NIP [c000000000096b70] hash__pmd_hugepage_update+0x48/0x284 LR [c000000000096e7c] hash__pmdp_huge_get_and_clear+0xd0/0xd4 Call Trace: [c000000604707670] [c000000004e102b8] 0xc000000004e102b8 (unreliable) [c000000604707700] [c00000000064ec3c] set_pmd_migration_entry+0x414/0x498 [c000000604707760] [c00000000063e5a4] migrate_vma_col ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ublk: reset per-IO canceled flag on each fetch If a ublk server starts recovering devices but dies before issuing fetch commands for all IOs, cancellation of the fetch commands that were successfully issued may never complete. This is because the per-IO canceled flag can remain set even after the fetch for that IO has been submitted - the per-IO canceled flags for all IOs in a queue are reset together only once all IOs for that queue have been fetched. So if a nonempty proper subset of the IOs for a queue are fetched when the ublk server dies, the IOs in that subset will never successfully be canceled, as their canceled flags remain set, and this prevents ublk_cancel_cmd from actually calling io_uring_cmd_done on the commands, despite the fact that they are outstanding. Fix this by resetting the per-IO cancel flags immediately when each IO is fetched instead of waiting for all IOs for the queue (which may never happen).

In the Linux kernel, the following vulnerability has been resolved: ice: fix potential NULL pointer deref in error path of ice_set_ringparam() ice_set_ringparam nullifies tstamp_ring of temporary tx_rings, without clearing ICE_TX_RING_FLAGS_TXTIME bit. When ICE_TX_RING_FLAGS_TXTIME is set and the subsequent ice_setup_tx_ring() call fails, a NULL pointer dereference could happen in the unwinding sequence: ice_clean_tx_ring() -> ice_is_txtime_cfg() == true (ICE_TX_RING_FLAGS_TXTIME is set) -> ice_free_tx_tstamp_ring() -> ice_free_tstamp_ring() -> tstamp_ring->desc (NULL deref) Clear ICE_TX_RING_FLAGS_TXTIME bit to avoid the potential issue. Note that this potential issue is found by manual code review. Compile test only since unfortunately I don't have E830 devices.

In the Linux kernel, the following vulnerability has been resolved: ceph: put folios not suitable for writeback The batch holds references to the folios (see `filemap_get_folios`, `folio_batch_release`), so we need to `folio_put` the folios we remove. Tested on v6.18.

In the Linux kernel, the following vulnerability has been resolved: sctp: stream: fully roll back denied add-stream state When ADD_OUT_STREAMS is denied, SCTP only shrinks the queued chunks and then lowers outcnt. That leaves removed stream metadata behind, so a later re-add can reuse a stale ext and hit a null-pointer dereference in the scheduler get path. Fix the rollback by tearing down the removed stream state the same way other stream resizes do. Unschedule the current scheduler state, drop the removed stream ext state with sctp_stream_outq_migrate(), and then reschedule the remaining streams. This keeps scheduler-private RR/FC/PRIO lists consistent while fully rolling back denied outgoing stream additions.

In the Linux kernel, the following vulnerability has been resolved: i2c: dev: prevent integer overflow in I2C_TIMEOUT ioctl While fuzzing with Syzkaller, a persistent `schedule_timeout: wrong timeout value` warning was observed, accompanied by SMBus controller state machine corruption. The I2C_TIMEOUT ioctl accepts a user-provided timeout in multiples of 10 ms. The user argument is checked against INT_MAX, but it is subsequently multiplied by 10 before being passed to msecs_to_jiffies(). A malicious user can pass a large value (e.g., 429496729) that passes the `arg > INT_MAX` check but overflows when multiplied by 10. This results in a truncated 32-bit unsigned value that bypasses the internal `(int)m < 0` check in `msecs_to_jiffies()`. The truncated value is then assigned to `client->adapter->timeout` (a signed 32-bit int), which is reinterpreted as a negative number. When passed to wait_for_completion_timeout(), this negative value undergoes sign extension to a 64-bit unsigned long, triggering the `schedule_timeout` warning and causing premature returns. This leaves the SMBus state machine in an unrecoverable state, constituting a local Denial of Service (DoS). Fix this by bounding the user argument to `INT_MAX / 10`. [wsa: move the comment as well]

In the Linux kernel, the following vulnerability has been resolved: net/sched: cls_fw: fix NULL dereference of "old" filters before change() Like pointed out by Sashiko [1], since commit ed76f5edccc9 ("net: sched: protect filter_chain list with filter_chain_lock mutex") TC filters are added to a shared block and published to datapath before their ->change() function is called. This is a problem for cls_fw: an invalid filter created with the "old" method can still classify some packets before it is destroyed by the validation logic added by Xiang. Therefore, insisting with repeated runs of the following script: # ip link add dev crash0 type dummy # ip link set dev crash0 up # mausezahn crash0 -c 100000 -P 10 \ > -A 4.3.2.1 -B 1.2.3.4 -t udp "dp=1234" -q & # sleep 1 # tc qdisc add dev crash0 egress_block 1 clsact # tc filter add block 1 protocol ip prio 1 matchall \ > action skbedit mark 65536 continue # tc filter add block 1 protocol ip prio 2 fw # ip link del dev crash0 can still make fw_classify() hit the WARN_ON() in [2]: WARNING: ./include/net/pkt_cls.h:88 at fw_classify+0x244/0x250 [cls_fw], CPU#18: mausezahn/1399 Modules linked in: cls_fw(E) act_skbedit(E) CPU: 18 UID: 0 PID: 1399 Comm: mausezahn Tainted: G E 7.0.0-rc6-virtme #17 PREEMPT(full) Tainted: [E]=UNSIGNED_MODULE Hardware name: Red Hat KVM, BIOS 1.16.3-2.el9 04/01/2014 RIP: 0010:fw_classify+0x244/0x250 [cls_fw] Code: 5c 49 c7 45 00 00 00 00 00 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 5b b8 ff ff ff ff 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 90 <0f> 0b 90 eb a0 0f 1f 80 00 00 00 00 90 90 90 90 90 90 90 90 90 90 RSP: 0018:ffffd1b7026bf8a8 EFLAGS: 00010202 RAX: ffff8c5ac9c60800 RBX: ffff8c5ac99322c0 RCX: 0000000000000004 RDX: 0000000000000001 RSI: ffff8c5b74d7a000 RDI: ffff8c5ac8284f40 RBP: ffffd1b7026bf8d0 R08: 0000000000000000 R09: ffffd1b7026bf9b0 R10: 00000000ffffffff R11: 0000000000000000 R12: 0000000000010000 R13: ffffd1b7026bf930 R14: ffff8c5ac8284f40 R15: 0000000000000000 FS: 00007fca40c37740(0000) GS:ffff8c5b74d7a000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fca40e822a0 CR3: 0000000005ca0001 CR4: 0000000000172ef0 Call Trace: <TASK> tcf_classify+0x17d/0x5c0 tc_run+0x9d/0x150 __dev_queue_xmit+0x2ab/0x14d0 ip_finish_output2+0x340/0x8f0 ip_output+0xa4/0x250 raw_sendmsg+0x147d/0x14b0 __sys_sendto+0x1cc/0x1f0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x126/0xf80 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fca40e822ba Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89 RSP: 002b:00007ffc248a42c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 000055ef233289d0 RCX: 00007fca40e822ba RDX: 000000000000001e RSI: 000055ef23328c30 RDI: 0000000000000003 RBP: 000055ef233289d0 R08: 00007ffc248a42d0 R09: 0000000000000010 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000001e R13: 00000000000186a0 R14: 0000000000000000 R15: 00007fca41043000 </TASK> irq event stamp: 1045778 hardirqs last enabled at (1045784): [<ffffffff864ec042>] __up_console_sem+0x52/0x60 hardirqs last disabled at (1045789): [<ffffffff864ec027>] __up_console_sem+0x37/0x60 softirqs last enabled at (1045426): [<ffffffff874d48c7>] __alloc_skb+0x207/0x260 softirqs last disabled at (1045434): [<ffffffff874fe8f8>] __dev_queue_xmit+0x78/0x14d0 Then, because of the value in the packet's mark, dereference on 'q->handle' with NULL 'q' occurs: BUG: kernel NULL pointer dereference, address: 0000000000000038 [...] RIP: 0010:fw_classify+0x1fe/0x250 [cls_fw] [...] Skip "old-style" classification on shared blocks, so that the NULL dereference is fixed and WARN_ON() is not hit anymore in the short lifetime of invalid cls_fw "old-style" filters. [1] https://sashiko.dev/#/patchset/2 ---truncated---

In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix FSCTL permission bypass by adding a permission check for FSCTL_SET_SPARSE FSCTL_SET_SPARSE in fsctl_set_sparse() modifies the file's sparse attribute and saves it through xattr without any permission checks. This exposes two issues: 1) A client on a read-only share can change the sparse attribute on files it opened, even though the share is read-only. Other FSCTL write operations already check test_tree_conn_flag(work->tcon, KSMBD_TREE_CONN_FLAG_WRITABLE), but FSCTL_SET_SPARSE does not. 2) Even on writable shares, clients without FILE_WRITE_DATA or FILE_WRITE_ATTRIBUTES access should not modify the sparse attribute. Similar handle-level checks exist in other functions but are missing here. Add both share-level writable check and per-handle access check. Use goto out on error to avoid leaking file references.

In the Linux kernel, the following vulnerability has been resolved: netfilter: conntrack: remove sprintf usage Replace it with scnprintf, the buffer sizes are expected to be large enough to hold the result, no need for snprintf+overflow check. Increase buffer size in mangle_content_len() while at it. BUG: KASAN: stack-out-of-bounds in vsnprintf+0xea5/0x1270 Write of size 1 at addr [..] vsnprintf+0xea5/0x1270 sprintf+0xb1/0xe0 mangle_content_len+0x1ac/0x280 nf_nat_sdp_session+0x1cc/0x240 process_sdp+0x8f8/0xb80 process_invite_request+0x108/0x2b0 process_sip_msg+0x5da/0xf50 sip_help_tcp+0x45e/0x780 nf_confirm+0x34d/0x990 [..]

In the Linux kernel, the following vulnerability has been resolved: netfilter: xtables: restrict several matches to inet family This is a partial revert of: commit ab4f21e6fb1c ("netfilter: xtables: use NFPROTO_UNSPEC in more extensions") to allow ipv4 and ipv6 only. - xt_mac - xt_owner - xt_physdev These extensions are not used by ebtables in userspace. Moreover, xt_realm is only for ipv4, since dst->tclassid is ipv4 specific.

In the Linux kernel, the following vulnerability has been resolved: nexthop: fix IPv6 route referencing IPv4 nexthop syzbot reported a panic [1] [2]. When an IPv6 nexthop is replaced with an IPv4 nexthop, the has_v4 flag of all groups containing this nexthop is not updated. This is because nh_group_v4_update is only called when replacing AF_INET to AF_INET6, but the reverse direction (AF_INET6 to AF_INET) is missed. This allows a stale has_v4=false to bypass fib6_check_nexthop, causing IPv6 routes to be attached to groups that effectively contain only AF_INET members. Subsequent route lookups then call nexthop_fib6_nh() which returns NULL for the AF_INET member, leading to a NULL pointer dereference. Fix by calling nh_group_v4_update whenever the family changes, not just AF_INET to AF_INET6. Reproducer: # AF_INET6 blackhole ip -6 nexthop add id 1 blackhole # group with has_v4=false ip nexthop add id 100 group 1 # replace with AF_INET (no -6), has_v4 stays false ip nexthop replace id 1 blackhole # pass stale has_v4 check ip -6 route add 2001:db8::/64 nhid 100 # panic ping -6 2001:db8::1 [1] https://syzkaller.appspot.com/bug?id=e17283eb2f8dcf3dd9b47fe6f67a95f71faadad0 [2] https://syzkaller.appspot.com/bug?id=8699b6ae54c9f35837d925686208402949e12ef3

In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_osf: fix out-of-bounds read on option matching In nf_osf_match(), the nf_osf_hdr_ctx structure is initialized once and passed by reference to nf_osf_match_one() for each fingerprint checked. During TCP option parsing, nf_osf_match_one() advances the shared ctx->optp pointer. If a fingerprint perfectly matches, the function returns early without restoring ctx->optp to its initial state. If the user has configured NF_OSF_LOGLEVEL_ALL, the loop continues to the next fingerprint. However, because ctx->optp was not restored, the next call to nf_osf_match_one() starts parsing from the end of the options buffer. This causes subsequent matches to read garbage data and fail immediately, making it impossible to log more than one match or logging incorrect matches. Instead of using a shared ctx->optp pointer, pass the context as a constant pointer and use a local pointer (optp) for TCP option traversal. This makes nf_osf_match_one() strictly stateless from the caller's perspective, ensuring every fingerprint check starts at the correct option offset.

In the Linux kernel, the following vulnerability has been resolved: netfilter: nfnetlink_osf: fix potential NULL dereference in ttl check The nf_osf_ttl() function accessed skb->dev to perform a local interface address lookup without verifying that the device pointer was valid. Additionally, the implementation utilized an in_dev_for_each_ifa_rcu loop to match the packet source address against local interface addresses. It assumed that packets from the same subnet should not see a decrement on the initial TTL. A packet might appear it is from the same subnet but it actually isn't especially in modern environments with containers and virtual switching. Remove the device dereference and interface loop. Replace the logic with a switch statement that evaluates the TTL according to the ttl_check.