CVE Feed

Incorrect access control in the getPortForwardRules function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to obtain port-forwarding rules via sending a crafted POST request to /cgi-bin/cstecgi.cgi.

Incorrect access control in the getWanIeCfg function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to obtain LAN addressing and DHCP configuration information via sending a crafted POST request to /cgi-bin/cstecgi.cgi.

In the Linux kernel, the following vulnerability has been resolved: mm/util: don't read __page_2 for order-1 folios in snapshot_page() snapshot_page() currently reads __page_2 after checking nr_pages > 1, but it should only do so when nr_pages > 2. If an order-1 folio is allocated at the end of a vmemmap section, __page_2 will not exist and reading it will cause a fault. During DLPAR memory remove on a 22 TB ppc64le LPAR, snapshot_page() oopsed on the page isolation path while reading an order-1 folio's __page_2 from an adjacent absent section (unmapped vmemmap). Fix this to avoid reading memmap that doesn't exist (e.g., a vmemmap hole).

Incorrect access control in the getVpnPassCfg function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to obtain VPN pass-through and WAN ping filter settings via sending a crafted POST request to /cgi-bin/cstecgi.cgi.

Incorrect access control in the getMacFilterRules function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to obtain MAC filter rules via sending a crafted POST request to /cgi-bin/cstecgi.cgi.

Incorrect access control in the getScheduleCfg function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to obtain schedule or scheduled-reboot configuration information via sending a crafted POST request to /cgi-bin/cstecgi.cgi.

Incorrect access control in the getSmartQosCfg function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to obtain Smart QoS configuration and rules via sending a crafted POST request to /cgi-bin/cstecgi.cgi.

Incorrect access control in the getDiagnosisCfg function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to obtain diagnostic configuration and ping log contents via sending a crafted POST request to /cgi-bin/cstecgi.cgi.

Incorrect access control in the getWanInfo function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to obtain WAN information returned by the endpoint via sending a crafted POST request to /cgi-bin/cstecgi.cgi.

Incorrect access control in the getPasswordCfg function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to obtain the administrative username via sending a crafted POST request to /cgi-bin/cstecgi.cgi.

Incorrect access control in the getCrpcConfig function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to obtain cloud remote-control status and URL information via sending a crafted POST request to /cgi-bin/cstecgi.cgi.

Incorrect access control in the getNtpCfg function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to obtain NTP configuration and current time data via sending a crafted POST request to /cgi-bin/cstecgi.cgi.

Incorrect access control in the getMeshNeighborTable function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to obtain mesh neighbor information via sending a crafted POST request to /cgi-bin/cstecgi.cgi.

Incorrect access control in the getApWiFiSchCfg function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to obtain AP-specific Wi-Fi scheduling rules via sending a crafted POST request to /cgi-bin/cstecgi.cgi.

Incorrect access control in the getWiFiGuestCfg function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to obtain guest Wi-Fi configuration information via sending a crafted POST request to /cgi-bin/cstecgi.cgi.

Incorrect access control in the getMeshPortalTable function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to obtain mesh portal table information via sending a crafted POST request to /cgi-bin/cstecgi.cgi.

Incorrect access control in the getWiFiScheduleCfg function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to obtain Wi-Fi scheduling rules via sending a crafted POST request to /cgi-bin/cstecgi.cgi.

Incorrect access control in the getWiFiEasyGuestCfg function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to obtain simplified guest Wi-Fi configuration, including guest credentials, via sending a crafted POST request to /cgi-bin/cstecgi.cgi.

Incorrect access control in the getWiFiAdvancedCfg function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to obtain advanced wireless settings via sending a crafted POST request to /cgi-bin/cstecgi.cgi.

Incorrect access control in the getStaticDhcpRules function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to obtain WPS runtime status via sending a crafted POST request to /cgi-bin/cstecgi.cgi.

Incorrect access control in the getWiFiEasyCfg function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to obtain sensitive information such as SSIDs and Wi-Fi keys, via sending a crafted POST request to /cgi-bin/cstecgi.cgi.

Incorrect access control in the getStationMacByIp function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to obtain a client MAC address via sending a crafted POST request to /cgi-bin/cstecgi.cgi.

Incorrect access control in the getDdnsStatus function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to obtain DDNS runtime status and public IP information via sending a crafted POST request to /cgi-bin/cstecgi.cgi.

Incorrect access control in the getWanCfg function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to obtain WAN configuration data via sending a crafted POST request to /cgi-bin/cstecgi.cgi.

Incorrect access control in the getInitCfg function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to obtain sensitive device configuration information via sending a crafted POST request to /cgi-bin/cstecgi.cgi.

Incorrect access control in the getNetInfoCfg function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to obtain network topology and interface configuration information via sending a crafted POST request to /cgi-bin/cstecgi.cgi.

Incorrect access control in the getMeshRoutingTable function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to obtain mesh routing information via sending a crafted POST request to /cgi-bin/cstecgi.cgi.

Incorrect access control in the getWiFiMeshConfig function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to obtain mesh configuration and runtime state information via sending a crafted POST request to /cgi-bin/cstecgi.cgi.

Incorrect access control in the getWiFiAclRules function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to obtain Wi-Fi ACL rules via sending a crafted POST request to /cgi-bin/cstecgi.cgi.

Incorrect access control in the getWiFiBasicCfg function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to obtain core wireless settings, including SSIDs and Wi-Fi keys, via sending a crafted POST request to /cgi-bin/cstecgi.cgi.

In the Linux kernel, the following vulnerability has been resolved: iomap: add a separate bio_set for iomap_split_ioend iomap_split_ioend can split bios that already come from iomap_ioend_bioset and thus deadlock when the bioset is exhausted. Add a separate bio_set to avoid this deadlock. Christian Brauner <[email protected]> says: Mark iomap_ioend_split_bioset static as it is only used in ioend.c, fixing the sparse warning reported by the kernel test robot.

In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: enforce cursor size limits for MOB cursors vmw_cursor_plane_atomic_check() bounds cursor width and height only on the legacy update path; the SVGA_CAP2_CURSOR_MOB path -- the default on modern hosts -- accepts any size. When the requested size exceeds SVGA_REG_CURSOR_MAX_DIMENSION or SVGA_REG_MOB_MAX_SIZE, vmw_cursor_mob_get() returns -EINVAL and leaves vps->cursor.mob NULL. Its return value is then discarded in vmw_cursor_plane_prepare_fb(), so the subsequent vmw_cursor_update_mob() calls vmw_bo_map_and_cache(NULL) and oopses inside vmw_bo_map_and_cache_size() on the tbo.base.size load. Reachable from any DRM master via DRM_IOCTL_MODE_CURSOR2 with a sufficiently large width or height (e.g. cursor_max_dim + 1). Reject oversized cursors in atomic_check for both MOB-backed cursor update types. The MOB byte-size limit only applies to the SVGA_CAP2_CURSOR_MOB path (vmw_cursor_mob_size() returns 0 for GB_ONLY); compute the required MOB size in 64-bit to avoid overflow when very large dimensions are requested. In prepare_fb only call vmw_cursor_mob_get()/_map() for VMW_CURSOR_UPDATE_MOB -- the GB_ONLY path uses bo->map.virtual directly and would otherwise be silently downgraded to NONE on hosts without SVGA_CAP2_CURSOR_MOB (where vmw_cursor_mob_get() always returns -EINVAL). Degrade the update to NONE if vmw_cursor_mob_get() or vmw_cursor_mob_map() fails so the update path does not run with a NULL backing MOB.

In the Linux kernel, the following vulnerability has been resolved: dmaengine: idxd: fix double free of wq, engine, and group structs The release callbacks for wq, engine, and group devices (idxd_conf_wq_release, idxd_conf_engine_release, idxd_conf_group_release) each call kfree() on the enclosing struct. The setup error paths and cleanup functions also call kfree() explicitly after put_device(), producing a double free whenever put_device() drops the reference count to zero and fires the release. In the setup functions, device_initialize() is called before device_add(), so the reference count is exactly 1 at the error sites. put_device() unconditionally fires the release, which frees the struct; the subsequent explicit kfree() then operates on freed memory. For idxd_setup_wqs(), the wq release callback also owns opcap_bmap and wqcfg. The error unwind additionally freed those fields explicitly before calling put_device(), causing further double frees on both. Remove the redundant explicit kfree() calls from all setup error paths and cleanup functions for wq, engine, and group structs, delegating sole ownership of those allocations to the release callbacks.

In the Linux kernel, the following vulnerability has been resolved: mmc: vub300: defer reset until cmd_mutex is unlocked vub300_cmndwork_thread() holds cmd_mutex while it sends a command and waits for the command response. If the response wait times out, __vub300_command_response() kills the command URBs and then synchronously resets the USB device through usb_reset_device(). That reset path re-enters the driver through vub300_pre_reset(), which also takes cmd_mutex. The worker therefore tries to acquire the same mutex recursively while it is still holding it from the command path. This issue was found by our static analysis tool and then manually reviewed against the current tree. The grounded PoC kept the real worker and timeout/reset carrier: vub300_cmndwork_thread() __vub300_command_response() usb_lock_device_for_reset() usb_reset_device() vub300_pre_reset() Lockdep reported the same-task recursive acquisition on cmd_mutex: WARNING: possible recursive locking detected ... (&test_vub300.cmd_mutex) ... at: usb_reset_device... [vuln_msv] ... (&test_vub300.cmd_mutex) ... at: vub300_cmndwork_thread+0x12/0x20 [vuln_msv] Workqueue: vub300_cmd_wq vub300_cmndwork_thread [vuln_msv] *** DEADLOCK *** Return a flag from __vub300_command_response() when the timeout path needs a device reset, then perform the reset after vub300_cmndwork_thread() has cleared the in-flight command state and dropped cmd_mutex. The reset is still attempted before mmc_request_done(), preserving the existing request completion ordering while avoiding the recursive lock.

In the Linux kernel, the following vulnerability has been resolved: media: atomisp: gc2235: fix UAF and memory leak gc2235_probe() handles its error paths incorrectly. If media_entity_pads_init() fails, gc2235_remove() is called, which tears down the subdev and frees dev, but then still falls through to atomisp_register_i2c_module(). This results in use-after-free. If atomisp_register_i2c_module() fails, the media entity and control handler are left initialized and dev is leaked. gc2235_remove() unconditionally calls media_entity_cleanup() and v4l2_ctrl_handler_free(), but these are not initialized at every error path in gc2235_probe(). Replace gc2235_remove() calls in the probe error paths with explicit unwind labels that free only the resources initialized at each point of failure, in reverse order of initialization.

In the Linux kernel, the following vulnerability has been resolved: rapidio/tsi721: prevent a bad dereference in tsi721_db_dpc() With a list_for_each() loop, if we don't find the item we are looking for in the list, then the loop exits with the iterator, which is "dbell" in this loop, pointing to invalid memory. This code uses the "found" variable to determine if we have found the doorbell we are looking for or not. However, the problem that the "found" variable needs to be set to false at the start of each iteration, otherwise after the first correct doorbell, then everything is marked as found. Reset the "found" to false at the start of the iteration and move the variable inside the loop.

In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix out-of-bounds write in ocfs2_remove_refcount_extent [BUG] Unlinking a refcounted file whose refcount tree has leaf blocks triggers a fortify panic due to an out-of-bounds write. [CAUSE] When the last leaf block is removed from a refcount tree, ocfs2_remove_refcount_extent() converts the root back to leaf mode with a bulk memset on &rb->rf_records. rf_records sits in an anonymous union with rf_list. rf_list.l_tree_depth aliases rf_records.rl_count, and is 0 for a single-level tree. With rl_count equal to 0, the memset writes past the 16-byte declared size of rf_records, which the fortify checker catches. [FIX] Replace the bulk memset on &rb->rf_records with a correctly-bounded memset on rl_recs[] alone, after setting rl_count to the correct value.

In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: avoid num_encaps underflow on bridge VLAN untag The DEV_PATH_BR_VLAN_UNTAG case post-decrements info->num_encaps inside WARN_ON_ONCE(). num_encaps is u8, so if it's already 0 the decrement still happens and wraps it to 255. The break only leaves the inner switch -- a later path entry can set info->indev back to a real device, and we end up returning with num_encaps == 255. nft_dev_forward_path() then walks info.encap[] (size 2) up to num_encaps, which means an OOB stack read and a bogus count copied into the route descriptor. Should only happen on a malformed bridge path stack, hence the WARN, but worth handling sanely. Move the decrement out of the WARN. [ While at this, remove the WARN_ON_ONCE since this can only happen with a buggy bridge path stack --pablo ].

In the Linux kernel, the following vulnerability has been resolved: HID: picolcd: prevent NULL pointer dereference in picolcd_send_and_wait() In picolcd_send_and_wait(), an integer overflow of the signed loop counter 'k' can theoretically lead to a NULL pointer dereference of 'raw_data'. If the loop executes more than INT_MAX times, 'k' becomes negative, making the condition 'k < size' true even when 'size' is 0. Change the type of 'k' to 'unsigned int' to prevent the overflow and eliminate the out-of-bounds access. Found by Linux Verification Center (linuxtesting.org) with the Svace static analysis tool. [[email protected]: extended hash length]

In the Linux kernel, the following vulnerability has been resolved: perf/x86/amd/lbr: Fix kernel address leakage A user-only branch stack can contain branches that originate from the kernel. As a result, kernel addresses are exposed to user space even when PERF_SAMPLE_BRANCH_USER is requested. On AMD processors supporting X86_FEATURE_AMD_LBR_V2, perf can still report SYSRET/ERET entries for which the branch-from addresses are in the kernel. E.g. $ perf record -e cycles -o - -j any,save_type,u -- \ perf bench syscall basic --loop 1000 | \ perf script -i - -F brstack|tr ' ' '\n'| \ grep -E '0x[89a-f][0-9a-f]{15}' ... 0xffffffff81001268/0x717a90a38f1a/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH 0xffffffff81001268/0x717a90a39157/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH 0xffffffff81001268/0x717a90a2c628/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH 0xffffffff81001268/0x717a90a41b60/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH 0xffffffff81001268/0x717a90a260db/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH 0xffffffff81001268/0x717a90a260db/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH 0xffffffff81001268/0x717a8bef1c30/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH 0xffffffff81001268/0x717a8e4d3c90/M/-/-/0/ERET/NON_SPEC_CORRECT_PATH ... The reason is that the hardware filter only considers the privilege level applicable to the branch target. Extend software filtering to also validate the branch-from addresses against br_sel, so that any branch record whose branch-from address is in the kernel is dropped when PERF_SAMPLE_BRANCH_USER is requested.

Incorrect access control in the getAccessDeviceCfg function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to obtain access-device policy and client state information via sending a crafted POST request to /cgi-bin/cstecgi.cgi.

In the Linux kernel, the following vulnerability has been resolved: vxlan: re-fetch eth header after route_shortcircuit() Before route_shortcircuit(), the eth header pointer is cached from eth_hdr(skb). Inside route_shortcircuit(), pskb_may_pull() can be called, which may reallocate skb->head. In this case, returning to vxlan_xmit() leaves the cached eth pointer pointing to freed memory, leading to a use-after-free when dereferencing eth->h_dest. Fix this by updating eth = eth_hdr(skb) after calling route_shortcircuit().

In the Linux kernel, the following vulnerability has been resolved: crypto: ccp/sev-dev-tsm - bail out early when pdev->bus is NULL dsm_create() initially checks pdev->bus when computing segment_id: u8 segment_id = pdev->bus ? pci_domain_nr(pdev->bus) : 0; But the next two lines unconditionally dereference pdev->bus via pcie_find_root_port() and especially pci_dev_id(pdev), which expands to PCI_DEVID(dev->bus->number, dev->devfn). If pdev->bus is in fact NULL, segment_id is initialised to 0 but the very next statement crashes the kernel. smatch flags this: drivers/crypto/ccp/sev-dev-tsm.c:253 dsm_create() error: we previously assumed 'pdev->bus' could be null (see line 251) Make the NULL handling consistent: if pdev->bus is NULL the device has no PCI context to work with and SEV TIO setup cannot proceed, so return -ENODEV before any of the bus-dependent lookups. The remaining initialisation now runs only on the path where pdev->bus is known to be valid. No change for callers where pdev->bus is non-NULL, which is the only case where dsm_create() did meaningful work before this change.

In the Linux kernel, the following vulnerability has been resolved: net: airoha: fix foe_check_time allocation size foe_check_time is declared as u16 pointer but was allocated with only ppe_num_entries bytes instead of ppe_num_entries * sizeof(u16). When airoha_ppe_foe_verify_entry() is called with hash >= ppe_num_entries/2, it writes beyond the allocated buffer, causing heap buffer overflow and potential kernel crash.

A command injection vulnerability in the 'advanced/curl' component of Osbil Technology oPanel v1.19.50 and earlier allows authenticated attackers to execute arbitrary shell commands via the 'url' parameter

In the Linux kernel, the following vulnerability has been resolved: mm/percpu-km: fix bitmap overflow and accounting in pcpu_create_chunk() In pcpu_create_chunk(), nr_pages is the total contiguous backing allocation, i.e., nr_units * pcpu_unit_pages, but pcpu_chunk_populated() uses it to set chunk->populated, whose size is pcpu_unit_pages, bitmap. Since bit N in chunk->populated means page offset N inside every unit is backed. When nr_units > 1, the function writes beyond chunk->populated. Fix it by using chunk->nr_pages. It also fixes the global pcpu_nr_empty_pop_pages accounting, since pcpu_balance_free() only iterates up to chunk->nr_pages. Commit a63d4ac4ab609 ("percpu: make percpu-km set chunk->populated bitmap properly") introduced the bitmap overflow issue. Later, commit b539b87fed37f ("percpu: implmeent pcpu_nr_empty_pop_pages and chunk->nr_populated") added pcpu_nr_empty_pop_pages and caused the accounting issue.

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Avoid double-unpin of DOORBELL/MMIO BOs on free amdgpu_amdkfd_gpuvm_free_memory_of_gpu() unpinned DOORBELL and MMIO remap BOs (which are pinned at allocation time) before checking whether the BO is still mapped to the GPU. When the BO is still mapped, the function returns -EBUSY and leaves the BO alive, but it has already been unpinned. The BO is then unpinned again when it is finally freed during process teardown, triggering a ttm_bo_unpin() underflow warning: WARNING: CPU: 18 PID: 15066 at ttm/ttm_bo.c:650 amdttm_bo_unpin+0x6d/0x80 [amdttm] Workqueue: kfd_process_wq kfd_process_wq_release [amdgpu] RIP: 0010:amdttm_bo_unpin+0x6d/0x80 [amdttm] Call Trace: amdgpu_bo_unpin+0x1a/0x90 [amdgpu] amdgpu_amdkfd_gpuvm_unpin_bo+0x31/0xb0 [amdgpu] amdgpu_amdkfd_gpuvm_free_memory_of_gpu+0x3bf/0x460 [amdgpu] kfd_process_free_outstanding_kfd_bos+0xd4/0x170 [amdgpu] kfd_process_wq_release+0x109/0x1b0 [amdgpu] process_one_work+0x1e2/0x3b0 worker_thread+0x50/0x3a0 kthread+0xdd/0x100 ret_from_fork+0x29/0x50 Move the unpin after the mapped_to_gpu_memory check so it only happens once we are committed to freeing the BO. (cherry picked from commit 927c5b2defb9b09856444d94bebfd056a002bd75)

In the Linux kernel, the following vulnerability has been resolved: net: ethernet: mtk_eth_soc: pass eth to mtk_handle_irq_rx in poll_controller mtk_handle_irq_rx expects a struct mtk_eth * (matching the request_irq cookie), but mtk_poll_controller incorrectly passed the net_device *. Calling ndo_poll_controller with CONFIG_NET_POLL_CONTROLLER enabled would then crash.

In the Linux kernel, the following vulnerability has been resolved: driver core: use READ_ONCE() for dev->driver in dev_has_sync_state() dev_has_sync_state() reads dev->driver twice without holding device_lock() -- once for the NULL check and once to dereference ->sync_state. Some callers only hold device_links_write_lock, which doesn't prevent a concurrent unbind from clearing dev->driver via device_unbind_cleanup(). Fix it by reading dev->driver exactly once with READ_ONCE(), pairing with the WRITE_ONCE() in device_set_driver().

In the Linux kernel, the following vulnerability has been resolved: ntfs: bound the look-ahead attribute-list entry in ntfs_external_attr_find() When resolving an attribute lookup with a non-zero @lowest_vcn, ntfs_external_attr_find() peeks at the next $ATTRIBUTE_LIST entry to decide whether to keep searching, but bounds that not-yet-validated entry only with "(u8 *)next_al_entry + 6 < al_end" (which proves just bytes 0..6 are in range) and "(u8 *)next_al_entry + length <= al_end" with an attacker-controlled, non-8-aligned length. It then reads next_al_entry->lowest_vcn (an __le64 at offset 8) and the name at next_al_entry->name_offset, both of which can lie past al_end -- the exact end of the kvmalloc'd attribute-list buffer (allocated at the on-disk attr_list_size, no rounding). A crafted on-disk $ATTRIBUTE_LIST whose last entry sits a few bytes before al_end therefore yields a slab out-of-bounds read when the inode is read. Validate the look-ahead entry with ntfs_attr_list_entry_is_valid() (added in patch 1/3) before dereferencing lowest_vcn and the name, so the same fixed-header, length and name bounds the main attribute-list walk uses now guard this read too.