CVE Feed

In the Linux kernel, the following vulnerability has been resolved: Drivers: hv: vmbus: use generic driver_override infrastructure When a driver is probed through __driver_attach(), the bus' match() callback is called without the device lock held, thus accessing the driver_override field without a lock, which can cause a UAF. Fix this by using the driver-core driver_override infrastructure taking care of proper locking internally. Note that calling match() from __driver_attach() without the device lock held is intentional. [1]

In the Linux kernel, the following vulnerability has been resolved: ntfs: validate resident attribute lists and harden the validator A base inode's $ATTRIBUTE_LIST is sanity-checked by load_attribute_list() only on the non-resident path; ntfs_read_locked_inode() copies a *resident* attribute list into ni->attr_list with a plain memcpy() and no validation at all. Every subsequent walk of ni->attr_list -- ntfs_external_attr_find(), ntfs_inode_attach_all_extents() and ntfs_attrlist_need() -- then trusts the entries are well-formed and reads attr_list_entry fixed-header fields (lowest_vcn at offset 8, mft_reference at offset 16, and the name) with bounds that assume validation already happened. A crafted resident attribute list therefore reaches those walks unvalidated and can drive out-of-bounds reads of the attribute-list buffer. load_attribute_list() itself reads ale->name_offset (offset 7), ale->mft_reference (offset 16) and the name length under only an "al < al_start + size" bound, so its own validation loop can over-read the fixed header of a truncated trailing entry by a few bytes. Factor the per-entry validation into ntfs_attr_list_entry_is_valid(), which requires each entry's fixed header (offsetof(struct attr_list_entry, name)) to be in range before any field is dereferenced, that ale->length is a multiple of 8 covering the fixed header plus the name, and that the entry is in use and carries a live MFT reference. ntfs_attr_list_is_valid() walks the buffer with it and checks the entries tile it exactly. Use the list validator in load_attribute_list() (replacing the open-coded loop, closing its own over-read) and on the resident path in ntfs_read_locked_inode() (which previously skipped validation entirely); patches 2/3 reuse the per-entry helper at the other two attribute-list walks.

In the Linux kernel, the following vulnerability has been resolved: hwmon: (occ) unregister sysfs devices outside occ lock occ_active(false) and occ_shutdown() unregister sysfs-backed devices while occ->lock is held. hwmon_device_unregister() and sysfs_remove_group() can wait for active sysfs callbacks to drain, and those callbacks can enter the OCC update path and try to take occ->lock again. That gives the unregister paths the lock ordering occ->lock -> sysfs callback drain, while a callback has the opposite edge sysfs callback -> occ->lock. This issue was found by our static analysis tool and then manually reviewed against the current tree. The grounded PoC kept the real unregister and callback carrier: occ_shutdown() hwmon_device_unregister() occ_show_temp_1() occ_update_response() Lockdep reported the circular dependency with occ_shutdown() already holding the OCC mutex and hwmon_device_unregister() waiting on the sysfs side: WARNING: possible circular locking dependency detected ... (sysfs_lock) ... at: hwmon_device_unregister+0x12/0x30 [vuln_msv] ... (&test_occ.lock) ... at: occ_shutdown.constprop.0+0xe/0x40 [vuln_msv] occ_update_response.isra.0+0xb/0x20 [vuln_msv] occ_show_temp_1.constprop.0.isra.0+0x23/0x40 [vuln_msv] *** DEADLOCK *** Serialize hwmon registration and removal with a separate hwmon_lock. Under that lock, detach occ->hwmon and update occ->active while occ->lock is held so concurrent OCC state changes still see a stable state, then drop occ->lock before calling hwmon_device_unregister(). Remove the driver sysfs group before taking occ->lock in occ_shutdown(), so draining the driver attributes cannot wait while the OCC mutex is held. Also make OCC update callbacks return -ENODEV after deactivation, so callbacks that already passed sysfs active protection do not poll the hardware after teardown has detached the hwmon device.

In the Linux kernel, the following vulnerability has been resolved: hfsplus: Add a sanity check for btree node size Syzbot reported an uninit-value bug in [1] with a corrupted HFS+ image, during the file system mounting process, specifically while loading the catalog, a corrupted node_size value of 1 caused the rec_off argument passed to hfs_bnode_read_u16() (within hfs_bnode_find()) to be excessively large. Consequently, the function failed to return a valid value to initialize the off variable, triggering the bug [1]. Every node starts from BTree node descriptor: struct hfs_bnode_desc. So, the size of node cannot be lesser than that. However, technical specification declares that: "The node size (which is expressed in bytes) must be power of two, from 512 through 32,768, inclusive." Add a check for btree node size base on technical specification. [1] BUG: KMSAN: uninit-value in hfsplus_bnode_find+0x141c/0x1600 fs/hfsplus/bnode.c:584 hfsplus_bnode_find+0x141c/0x1600 fs/hfsplus/bnode.c:584 hfsplus_btree_open+0x169a/0x1e40 fs/hfsplus/btree.c:382 hfsplus_fill_super+0x111f/0x2770 fs/hfsplus/super.c:553 get_tree_bdev_flags+0x6e6/0x920 fs/super.c:1694 get_tree_bdev+0x38/0x50 fs/super.c:1717 hfsplus_get_tree+0x35/0x40 fs/hfsplus/super.c:709 vfs_get_tree+0xb3/0x5d0 fs/super.c:1754 fc_mount fs/namespace.c:1193 [inline]

In the Linux kernel, the following vulnerability has been resolved: ocfs2: don't BUG_ON an invalid journal dinode [BUG] A fuzzed OCFS2 image can corrupt the current slot journal dinode while mount is still in progress. The mount path first reports the invalid journal block and then crashes in shutdown: kernel BUG at fs/ocfs2/journal.c:1034! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI RIP: 0010:ocfs2_journal_toggle_dirty+0x2d6/0x340 fs/ocfs2/journal.c:1034 Call Trace: ocfs2_journal_shutdown+0x414/0xc30 fs/ocfs2/journal.c:1116 ocfs2_mount_volume fs/ocfs2/super.c:1785 [inline] ocfs2_fill_super+0x30a9/0x3cd0 fs/ocfs2/super.c:1083 get_tree_bdev_flags+0x38b/0x640 fs/super.c:1698 get_tree_bdev+0x24/0x40 fs/super.c:1721 ocfs2_get_tree+0x21/0x30 fs/ocfs2/super.c:1184 vfs_get_tree+0x9a/0x370 fs/super.c:1758 fc_mount fs/namespace.c:1199 [inline] do_new_mount_fc fs/namespace.c:3642 [inline] do_new_mount fs/namespace.c:3718 [inline] path_mount+0x5b8/0x1ea0 fs/namespace.c:4028 do_mount fs/namespace.c:4041 [inline] __do_sys_mount fs/namespace.c:4229 [inline] __se_sys_mount fs/namespace.c:4206 [inline] __x64_sys_mount+0x282/0x320 fs/namespace.c:4206 ... [CAUSE] ocfs2_journal_toggle_dirty() used to return -EIO when journal->j_bh no longer contained a valid dinode, because the startup and shutdown paths already handled that failure. Commit 10995aa2451a ("ocfs2: Morph the haphazard OCFS2_IS_VALID_DINODE() checks.") changed the check to a BUG_ON() under the assumption that the journal dinode had already been validated. That turns an unexpected invalid journal dinode during mount teardown into a kernel crash instead of a normal mount failure. [FIX] Replace the BUG_ON() with WARN_ON() and return -EIO. This keeps the invariant warning for debugging, but restores the original behavior of failing startup or shutdown cleanly instead of panicking the kernel.

In the Linux kernel, the following vulnerability has been resolved: RDMA/hns: Fix warning in poll cq direct mode CQs allocated by ib_alloc_cq() always have a comp_handler. Though in direct mode this handler is never expected to be called, it is still called when the driver is reset, triggering the following WARN_ONCE(): Call trace: ib_cq_completion_direct+0x38/0x60 hns_roce_cq_completion+0x54/0x90 (hns_roce_hw_v2] hns_roce_handle_device_err+Ox1c8/0x340 [hns_roce_hw_v2] hns_roce_hw_v2_uninit_instance.constprop.0+0x34/0x70 [hns_roce_hw_v2] hns_roce_hw_v2_reset_notify+0xc4/0xe0 [hns_roce_hw_v2] hclge_notify_roce_client+0x60/0xbc [hclge] hclge_reset_rebuild+0x48/0x34c [hclge] hclge_reset_subtask+0xcc/0xec [hclge] hclge_reset_service_task+0x80/0x160 [hclge] hclge_service_task+0x50/0x80 (hclge] process_one_work+0x1cc/0x4d0 worker_thread+0x154/0x414 kthread+0x104/0x144 ret_from_fork+0x10/0x18

In the Linux kernel, the following vulnerability has been resolved: crypto: ccp - Treat zero-length cert chain as query for blob lengths When handling a PDH export, treat a zero-length userspace cert chain buffer as a request to query the length of the relevant blobs. Failure to account for the zero-length buffer trips a BUG_ON() when running with CONFIG_DEBUG_VIRTUAL=y due to trying to get the physical address of the ZERO_SIZE_PTR (returned by kzalloc() on the bogus allocation). kernel BUG at arch/x86/mm/physaddr.c:28 ! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 30 UID: 0 PID: 28580 Comm: syz.2.18 Kdump: loaded Tainted: G W 6.18.16-smp-DEV #1 NONE Tainted: [W]=WARN Hardware name: Google, Inc. Arcadia_IT_80/Arcadia_IT_80, BIOS 12.62.0-0 11/19/2025 RIP: 0010:__phys_addr+0x16a/0x180 arch/x86/mm/physaddr.c:28 RSP: 0018:ffffc9008329fc80 EFLAGS: 00010293 RAX: ffffffff8179110a RBX: 0000778000000010 RCX: ffff8884e6992600 RDX: 0000000000000000 RSI: 0000000080000010 RDI: 0000778000000010 RBP: ffffc9008329fdf0 R08: 0000000000000dc0 R09: 00000000ffffffff R10: dffffc0000000000 R11: fffffbfff126d297 R12: dffffc0000000000 R13: 1ffff92010653fc8 R14: 0000000080000010 R15: dffffc0000000000 FS: 0000555556bec9c0(0000) GS:ffff88aa4ce1c000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fd3159e7000 CR3: 00000004fbc44000 CR4: 0000000000350ef0 Call Trace: <TASK> [<ffffffff853d3869>] sev_ioctl_do_pdh_export+0x559/0x7a0 drivers/crypto/ccp/sev-dev.c:2308 [<ffffffff853d1fdd>] sev_ioctl+0x2cd/0x480 drivers/crypto/ccp/sev-dev.c:2556 [<ffffffff82549ebc>] vfs_ioctl fs/ioctl.c:52 [inline] [<ffffffff82549ebc>] __do_sys_ioctl fs/ioctl.c:598 [inline] [<ffffffff82549ebc>] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:584 [<ffffffff8630115f>] do_syscall_x64 arch/x86/entry/syscall_64.c:64 [inline] [<ffffffff8630115f>] do_syscall_64+0x9f/0xf40 arch/x86/entry/syscall_64.c:98 [<ffffffff81000136>] entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7fd3158eac39 </TASK> Thankfully, the bug is benign outside of CONFIG_DEBUG_VIRTUAL=y as getting the physical address is just arithmetic, and the PSP errors out before trying to write to the garbage address (which it must, otherwise querying the blob lengths would clobber memory at pfn=0).

In the Linux kernel, the following vulnerability has been resolved: wifi: wlcore: enable the right set of ciphers The firmware version number check for IGTK introduced in commit c34dbc5900b0 ("wifi: wlcore: Add support for IGTK key") lets the amount of ciphers decrease on every boot of a too old firmware and that is practically happening. It also does not take into account other chips than the wl18xx. On some wl128x, the following can be observed when connecting via nm to a common ap: [ 484.113311] wlcore: WARNING could not set keys [ 484.117828] wlcore: ERROR Could not add or replace key [ 484.123016] wlan0: failed to set key (5, ff:ff:ff:ff:ff:ff) to hardware (-5) [ 484.123046] wlcore: Hardware recovery in progress. FW ver: Rev 7.3.10.0.142 [ 484.139923] wlcore: pc: 0x0, hint_sts: 0x00000048 count: 1 [ 484.145721] wlcore: down [ 484.148986] ieee80211 phy0: Hardware restart was requested [ 484.610473] wlcore: firmware booted (Rev 7.3.10.0.142) [ 484.633758] wlcore: Association completed. [ 484.690490] wlcore: ERROR command execute failure 14 [ 484.690490] ------------[ cut here ]------------ [ 484.700195] WARNING: drivers/net/wireless/ti/wlcore/main.c:872 at wl12xx_queue_recovery_work+0x64/0x74 [wlcore], CPU#0: kworker/0:0/892 This repeats endlessly. Always disable IGTK on wl12xx and fix the decrementing mess.

In the Linux kernel, the following vulnerability has been resolved: octeontx2-af: npc: Fix size of entry2cntr_map KASAN prints below splat. This is caused by allocating counter for reserved mcam entry for cpt 2nd pass entry. But mcam->entry2cntr_map is not allocated for reserved entries. BUG: KASAN: slab-out-of-bounds in npc_map_mcam_entry_and_cntr+0xb0/0x1a0 Write of size 2 at addr ffff0001033e7ffe by task kworker/0:1/14 CPU: 0 PID: 14 Comm: kworker/0:1 Not tainted 6.1.67 #1 Hardware name: Marvell CN106XX board (DT) Workqueue: events work_for_cpu_fn Call trace: dump_backtrace.part.0+0xe4/0xf0 show_stack+0x18/0x30 dump_stack_lvl+0x88/0xb4 print_report+0x154/0x458 kasan_report+0xb8/0x194 __asan_store2+0x7c/0xa0 npc_map_mcam_entry_and_cntr+0xb0/0x1a0 rvu_mbox_handler_npc_mcam_write_entry+0x268/0x280 npc_install_flow+0x840/0xfe0 rvu_npc_install_cpt_pass2_entry+0x138/0x190 rvu_nix_init+0x148c/0x2880 rvu_probe+0x1800/0x30b0 local_pci_probe+0x78/0xe0 work_for_cpu_fn+0x30/0x50 process_one_work+0x4cc/0x97c worker_thread+0x360/0x630 kthread+0x1a0/0x1b0 ret_from_fork+0x10/0x20

In the Linux kernel, the following vulnerability has been resolved: ALSA: seq: oss: Serialize readq reset state with q->lock snd_seq_oss_readq_clear() resets qlen, head, and tail without q->lock even though the normal reader and producer paths serialize the same ring state under that spinlock. A reset can therefore race snd_seq_oss_readq_free() or snd_seq_oss_readq_put_event() and leave stale records in the queue, drop freshly queued ones, or report the wrong readiness after wakeup. KCSAN reports a data race between snd_seq_oss_readq_clear() and snd_seq_oss_readq_free(). Take q->lock while clearing the ring and resetting input_time. Factor the enqueue logic into a caller-locked helper so snd_seq_oss_readq_put_timestamp() updates its suppression state under the same lock instead of racing the reset path. The buggy scenario involves two paths, with each column showing the order within that path: reset path: locked readq updater: 1. snd_seq_oss_reset() or 1. A reader or callback producer release reaches takes q->lock on the same queue. snd_seq_oss_readq_clear(). 2. snd_seq_oss_readq_clear() 2. The updater tests or modifies resets qlen, head, tail, qlen, head, and tail. and input_time. 3. snd_seq_oss_readq_clear() 3. The updater completes its wakes sleepers on read-modify-write sequence. q->midi_sleep. 4. Without q->lock, the reset 4. The resulting ring state drives can overlap the locked later reads and readiness. update. KCSAN reports: BUG: KCSAN: data-race in snd_seq_oss_readq_clear / snd_seq_oss_readq_free write to 0xffff8881069fe608 of 4 bytes by task 120516 on cpu 0: snd_seq_oss_readq_free+0x6c/0x80 snd_seq_oss_read+0xcb/0x250 odev_read+0x38/0x60 vfs_read+0xff/0x600 ksys_read+0xb4/0x140 __x64_sys_read+0x46/0x60 do_syscall_64+0xbb/0x2f0 entry_SYSCALL_64_after_hwframe+0x77/0x7f read to 0xffff8881069fe608 of 4 bytes by task 120517 on cpu 1: snd_seq_oss_readq_clear+0x1f/0x90 snd_seq_oss_reset+0xa7/0xf0 snd_seq_oss_ioctl+0x6f6/0x7e0 odev_ioctl+0x56/0xc0 __x64_sys_ioctl+0xd1/0x120 do_syscall_64+0xbb/0x2f0 entry_SYSCALL_64_after_hwframe+0x77/0x7f value changed: 0x00000001 -> 0x00000000

In the Linux kernel, the following vulnerability has been resolved: coresight: ete: Always save state on power down System register ETMs and ETE are unlikely to be preserved on CPU power down. The ETE DT binding also never documented "arm,coresight-loses-context-with-cpu" so nobody would have legitimately been able to use that binding to fix it and ACPI has no such binding at all. Fix it by hard coding the setting for sysreg ETMs (ETE is always sysreg) or ACPI boots. Use a local variable when setting up save_state so that it's immune to concurrent probing when devices have different configurations which is an issue with modifying the global. This fixes the following error when using Coresight with ACPI on the FVP which supports CPU PM: coresight ete0: External agent took claim tag WARNING: drivers/hwtracing/coresight/coresight-core.c:248 at coresight_disclaim_device_unlocked+0xe0/0xe8, CPU#0: perf/117

In the Linux kernel, the following vulnerability has been resolved: powerpc/perf: fix preempt count underflow in fsl_emb_pmu_del fsl_emb_pmu_del() unconditionally calls put_cpu_var(cpu_hw_events) at the 'out:' label, but only calls the matching get_cpu_var() after the 'i < 0' early-return check. When event->hw.idx is negative the function jumps to 'out:' without having taken get_cpu_var(), and the trailing put_cpu_var() then issues an unmatched preempt_enable(), underflowing preempt_count. On a CONFIG_PREEMPT=y kernel preempt_count would underflow and eventually present as a 'scheduling while atomic' BUG. Move put_cpu_var() to pair with get_cpu_var() so the percpu access is correctly bracketed and the 'out:' label only handles perf_pmu_enable.

In the Linux kernel, the following vulnerability has been resolved: samples/damon/mtier: fail early if address range parameters are invalid The comment on top of `struct damon_region` clearly says that For any use case, @ar should be non-zero positive size. which is now verified in damon_verify_new_region() if the kernel is built with DAMON_DEBUG_SANITY. The WARN_ONCE() can be triggered if the mtier sample module is enabled before node{0,1}_{start,end}_addr have been properly initialized, which is obviously not good. ------------[ cut here ]------------ start 0 >= end 0 WARNING: mm/damon/core.c:217 at damon_new_region+0xf4/0x118, CPU#59: bash/341468 Call trace: damon_new_region+0xf4/0x118 (P) damon_set_regions+0xfc/0x3c0 damon_sample_mtier_build_ctx+0xe8/0x3a8 damon_sample_mtier_start+0x1c/0x90 damon_sample_mtier_enable_store+0x98/0xb0 param_attr_store+0xb4/0x128 module_attr_store+0x2c/0x50 sysfs_kf_write+0x58/0x90 kernfs_fop_write_iter+0x16c/0x238 vfs_write+0x2c0/0x370 ksys_write+0x74/0x118 __arm64_sys_write+0x24/0x38 invoke_syscall+0xa8/0x118 el0_svc_common.constprop.0+0x48/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x54/0x370 el0t_64_sync_handler+0xa0/0xe8 el0t_64_sync+0x1ac/0x1b0 ---[ end trace 0000000000000000 ]--- Note that the same issue can happen if detect_node_addresses is true, and node 0 or 1 is memoryless. Fix it together by checking the validity of parameters right before damon_new_region() and fail early if they're invalid.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: ensure no dangling hcon references in iso_conn After iso_conn_del(), ISO sockets should not dereference the hcon any more. Currently, clearing iso_conn::hcon relies on iso_conn_del() releasing the last reference to the iso_conn. Simplify this by explicitly clearing conn->hcon in iso_conn_del(), to avoid more complex reasoning on races about who holds the last reference.

In the Linux kernel, the following vulnerability has been resolved: spi: spi-qpic-snand: write the feature value before executing SET_FEATURE qcom_spi_send_cmdaddr() programs NAND_FLASH_CMD/NAND_EXEC_CMD and submits the descriptors, which makes the controller execute the command immediately. For SPINAND_SET_FEATURE the value to be written is only placed into NAND_FLASH_FEATURES afterwards, by qcom_spi_io_op(), in a second submission - so the chip is programmed with whatever that register happened to hold from a previous operation, and the intended value is only applied by the *next* SET_FEATURE. Measured on a TP-Link Archer AX55 v1 (IPQ5018, ESMT F50L1G41LB): writing 0x40 to the configuration register (0xb0) leaves the chip at 0x00, and the subsequent write of 0x00 leaves it at 0x40 - every write lands one operation late. This stayed unnoticed until v6.18 added SPI-NAND OTP support together with OTP entries for ESMT chips. spinand_otp_rw() enables OTP mode, reads, and disables it again, and mtd_otp_nvmem_add() does this during MTD registration. With the off-by-one, the "disable" write actually applies the previously requested value, so CFG_OTP_ENABLE ends up set: the chip stays in OTP mode, every subsequent array read returns the OTP area instead of the array (UBI reports an empty device) and all writes fail with -EIO because the OTP area is write protected. On this board that makes the whole flash unusable and the device unbootable. Write the feature value into NAND_FLASH_FEATURES as part of the same transaction, before NAND_EXEC_CMD. While at it, copy only the bytes the operation actually carries - the previous code dereferenced a 4-byte pointer on a one-byte buffer (spinand->scratchbuf). With this patch the flash contents read back bit-identical to a known-good dump of the same board taken under the vendor firmware (md5-verified across partitions), and writes work.

In the Linux kernel, the following vulnerability has been resolved: hwmon: (sht3x) Fix unaligned accesses Sashiko reports: In sht3x_update_client(), the 16-bit temperature and humidity values are extracted from a stack-allocated byte array using be16_to_cpup(). The pointers passed to this function are calculated as buf and buf + 3. Since the difference between the two pointers is an odd number of bytes, at least one of them is guaranteed to be at an unaligned offset. This will trigger an alignment fault on strict-alignment architectures such as ARMv5 or SPARC, resulting in a kernel panic. Fix the problem by using get_unaligned_be16() instead of be16_to_cpup(), and put_unaligned_be16() instead of cpu_to_be16().

In the Linux kernel, the following vulnerability has been resolved: erofs: ensure valid f_path for page cache sharing Previously, backing files for page cache sharing were set up with f_path left as NULL (only f_inode was valid). It worked, but a recent mincore fix relies on f_path.mnt and crashes (found by "erofs/028" on 7.2-rc4): BUG: kernel NULL pointer dereference, address: 0000000000000018 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] SMP PTI CPU: 3 UID: 0 PID: 675528 Comm: fincore Not tainted 7.2.0-rc4-00002-g[]-dirty #1 PREEMPT(lazy) Hardware name: Red Hat KVM, BIOS 1.16.0-4.al8 04/01/2014 RIP: 0010:__do_sys_mincore+0xc0/0x2c0 ... Specify valid paths using valid disconnected dentries together with erofs_ishare_mnt instead of leaving f_path empty, so they are more like real backing files in a pseudo filesystem and standard backing_file_open() can be used directly.

In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Initialize hba->rpmbs list in ufshcd Initialize the hba->rpmbs list in ufshcd_alloc_host() to prevent NULL pointer dereference in the device teardown path if ufs_rpmb_probe() fails.

In the Linux kernel, the following vulnerability has been resolved: riscv/mm: use physical alignment for vmemmap_start_pfn RISC-V computes vmemmap_start_pfn by rounding phys_ram_base down to VMEMMAP_ADDR_ALIGN. That alignment must therefore be expressed in the physical-address domain. Commit 476849b0fba4 ("riscv/mm: align vmemmap to maximal folio size") attempted to account for the maximal folio alignment by feeding MAX_FOLIO_VMEMMAP_ALIGN directly into VMEMMAP_ADDR_ALIGN. However, MAX_FOLIO_VMEMMAP_ALIGN is measured in bytes of struct page storage, whereas VMEMMAP_ADDR_ALIGN is used to align a physical address. The mask-based compound_info encoding requires pfn_to_page(0) to be naturally aligned to MAX_FOLIO_VMEMMAP_ALIGN. Commit 9f94db4c7eaa ("mm/sparse: check memmap alignment for compound_info_has_mask()") added a check for that requirement and exposed the unit mismatch on systems such as QEMU virt, where the DRAM base is not aligned to MAX_FOLIO_NR_PAGES * PAGE_SIZE. Here is the log: [ 0.000000][ C0] ------------[ cut here ]------------ [ 0.000000][ C0] WARNING: mm/sparse.c:365 at sparse_init+0x58a/0x6fe, CPU#0: swapper/0 [ 0.000000][ C0] Modules linked in: [ 0.000000][ C0] CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 7.2.0-rc3-g1d8304bdd65f #2 PREEMPT [ 0.000000][ C0] Hardware name: riscv-virtio,qemu (DT) [ 0.000000][ C0] epc : sparse_init+0x58a/0x6fe [ 0.000000][ C0] ra : sparse_init+0x58a/0x6fe [ 0.000000][ C0] epc : ffffffff86851c88 ra : ffffffff86851c88 sp : ffffffff88807a30 [ 0.000000][ C0] gp : ffffffff8a3bf240 tp : ffffffff88842080 t0 : ff600000ffab6000 [ 0.000000][ C0] t1 : 000000017fab6000 t2 : 65203a6573726363 s0 : ffffffff88807bc0 [ 0.000000][ C0] s1 : 000000000e000000 a0 : 0000000000000007 a1 : 0000000000000000 [ 0.000000][ C0] a2 : 0000000000000002 a3 : ffffffff86851c88 a4 : 0000000000000000 [ 0.000000][ C0] a5 : ffffffff88843080 a6 : 0000000000000003 a7 : 0000000000000000 [ 0.000000][ C0] s2 : ff60000000000000 s3 : 0040000000000000 s4 : 0004000000000000 [ 0.000000][ C0] s5 : ffffffff8a4d92e0 s6 : ff600000ffab55e0 s7 : ffffffff88384d00 [ 0.000000][ C0] s8 : 0000000000000003 s9 : ffffffff88384cc1 s10: ffffffff88384cc0 [ 0.000000][ C0] s11: ffffffff8a4daae0 t3 : ffffffff915e8b20 t4 : ffffffff915e8b20 [ 0.000000][ C0] t5 : ffffffff915e8b20 t6 : ffffffff915e8bc8 ssp : 0000000000000000 [ 0.000000][ C0] status: 0000000200000100 badaddr: ffffffff86851c88 cause: 0000000000000003 [ 0.000000][ C0] [<ffffffff86851c88>] sparse_init+0x58a/0x6fe [ 0.000000][ C0] [<ffffffff8683d396>] mm_core_init_early+0x116/0x1e30 [ 0.000000][ C0] [<ffffffff86801edc>] start_kernel+0xd2/0x848 Convert MAX_FOLIO_VMEMMAP_ALIGN to the equivalent physical alignment before using it in VMEMMAP_ADDR_ALIGN. This keeps the existing round_down() logic while making the resulting vmemmap base satisfy the mask-alignment requirement.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: sco: Fix a race condition in sco_sock_timeout() sco_sock_timeout() runs asynchronously and lock_sock(sk). If the socket is closing while the timer is running, it holds the same lock (lock_sock(sk)) twice, leading to a deadlock. CPU 0 CPU 1 ==================== ====================== sco_sock_close() sco_sock_timeout() lock_sock(sk) // <-- LOCK __sco_sock_close() sco_chan_del() sco_conn_put() sco_conn_free() disable_delayed_work_sync() lock(sk) // <-- SAME LOCK Fix this by moving disable_delayed_work_sync() outside of lock_sock(sk), ensuring that no lock_sock(sk) is held before sco_sock_timeout(). Lockdep splat: WARNING: possible circular locking dependency detected 6.13.0-rc4 #7 Not tainted syz-executor292/9514 is trying to acquire lock: ffff8881115d5070 ((work_completion)(&(&conn->timeout_work)->work)){+.+.}-{0:0}, at: rcu_lock_acquire sect/v6.13-rc4/./include/linux/rcupdate.h:337 [inline] ffff8881115d5070 ((work_completion)(&(&conn->timeout_work)->work)){+.+.}-{0:0}, at: rcu_read_lock sect/v6.13-rc4/./include/linux/rcupdate.h:849 [inline] ffff8881115d5070 ((work_completion)(&(&conn->timeout_work)->work)){+.+.}-{0:0}, at: start_flush_work sect/v6.13-rc4/kernel/workqueue.c:4137 [inline] ffff8881115d5070 ((work_completion)(&(&conn->timeout_work)->work)){+.+.}-{0:0}, at: __flush_work+0xd1/0xc40 sect/v6.13-rc4/kernel/workqueue.c:4195 but task is already holding lock: ffff88807db3a258 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}, at: lock_sock sect/v6.13-rc4/./include/net/sock.h:1623 [inline] ffff88807db3a258 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}, at: sco_sock_close+0x25/0x100 sect/v6.13-rc4/net/bluetooth/sco.c:524 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (sk_lock-AF_BLUETOOTH-BTPROTO_SCO){+.+.}-{0:0}: lock_acquire+0x1c4/0x520 sect/v6.13-rc4/kernel/locking/lockdep.c:5849 lock_sock_nested+0x48/0x130 sect/v6.13-rc4/net/core/sock.c:3622 lock_sock sect/v6.13-rc4/./include/net/sock.h:1623 [inline] sco_sock_timeout+0xbe/0x270 sect/v6.13-rc4/net/bluetooth/sco.c:158 process_one_work sect/v6.13-rc4/kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa99/0x18f0 sect/v6.13-rc4/kernel/workqueue.c:3310 worker_thread+0x8a9/0xd80 sect/v6.13-rc4/kernel/workqueue.c:3391 kthread+0x2c6/0x360 sect/v6.13-rc4/kernel/kthread.c:389 ret_from_fork+0x4e/0x80 sect/v6.13-rc4/arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 sect/v6.13-rc4/arch/x86/entry/entry_64.S:244 -> #0 ((work_completion)(&(&conn->timeout_work)->work)){+.+.}-{0:0}: check_prev_add sect/v6.13-rc4/kernel/locking/lockdep.c:3161 [inline] check_prevs_add sect/v6.13-rc4/kernel/locking/lockdep.c:3280 [inline] validate_chain+0x1888/0x5760 sect/v6.13-rc4/kernel/locking/lockdep.c:3904 __lock_acquire+0x13b4/0x2120 sect/v6.13-rc4/kernel/locking/lockdep.c:5226 lock_acquire+0x1c4/0x520 sect/v6.13-rc4/kernel/locking/lockdep.c:5849 touch_work_lockdep_map sect/v6.13-rc4/kernel/workqueue.c:3909 [inline] start_flush_work sect/v6.13-rc4/kernel/workqueue.c:4163 [inline] __flush_work+0x70f/0xc40 sect/v6.13-rc4/kernel/workqueue.c:4195 __cancel_work_sync sect/v6.13-rc4/kernel/workqueue.c:4351 [inline] disable_delayed_work_sync+0xbb/0xf0 sect/v6.13-rc4/kernel/workqueue.c:4514 sco_conn_free sect/v6.13-rc4/net/bluetooth/sco.c:95 [inline] kref_put sect/v6.13-rc4/./include/linux/kref.h:65 [inline] sco_conn_put+0x18f/0x270 sect/v6.13-rc4/net/bluetooth/sco.c:107 sco_chan_del+0xe2/0x210 sect/v6.13-rc4/net/bluetooth/sco.c:236 sco_sock_close+0x8f/0x100 sect/v6.13-rc4/net/bluetooth/sco.c:526 sco_sock_release+0x62/0x2d0 sect/v6.13-rc4/net/blueto ---truncated---

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: nv: Inject SEA if kvm_translate_vncr() can't resolve PFN kvm_handle_vncr_abort() assumes that s1_walk_result conveys an abort when kvm_translate_vncr() returns -EFAULT. This is not always the case as it's possible to encounter 'late' failures on the output of S1 translation, e.g. a GFN outside of the memslots. Fix it by preparing an external abort before returning from kvm_translate_vncr(). Get rid of the BUG_ON() in the fault injection path while at it.

In the Linux kernel, the following vulnerability has been resolved: cxl: Fix CXL_HEADERLOG_SIZE to match RAS Capability size The CXL r4.0 8.2.4.17.7 RAS Capability Structure has total length 0x58 bytes (CXL_RAS_CAPABILITY_LENGTH); the Header Log occupies the trailing 64 bytes at offset 0x18. CXL_HEADERLOG_SIZE was defined as SZ_512, eight times the actual on-device size. header_log_copy() reads CXL_HEADERLOG_SIZE_U32 (128) dwords from the RAS capability iomap, overrunning the 88-byte mapping by 448 bytes. The cxl_aer_uncorrectable_error trace event memcpy()s CXL_HEADERLOG_SIZE (512) bytes from its source. For the CPER caller the source is struct cxl_ras_capability_regs::header_log[16] (64 bytes) embedded in a stack-local cxl_cper_prot_err_work_data, so the memcpy reads 448 bytes of kernel stack into the trace event ring buffer where userspace can read it via tracefs. Set CXL_HEADERLOG_SIZE to 64 and derive CXL_HEADERLOG_SIZE_U32 from it, bringing all iomap readers into agreement on 16 dwords. Userspace tools such as rasdaemon have grown a dependency on the buggy 512-byte (128 u32) header_log layout in the cxl_aer_uncorrectable_error trace event. Add CXL_HEADERLOG_TRACE_SIZE_U32 = 128 and use it for the trace event __array and its memcpy to preserve that ABI. Both callers now pass a zero-filled u32[CXL_HEADERLOG_TRACE_SIZE_U32] staging buffer with only the first CXL_HEADERLOG_SIZE_U32 (16) entries populated from hardware; the remaining 112 u32s are zero-padded, keeping the 512-byte trace ring buffer layout intact. [ dj: Replaced 64 with SZ_64 per RichardC ]

In the Linux kernel, the following vulnerability has been resolved: pinctrl: spacemit: fix NULL check in spacemit_pin_set_config spacemit_pin_set_config() looks up the per-pin descriptor with spacemit_get_pin() then checks the wrong variable for failure: const struct spacemit_pin *spin = spacemit_get_pin(pctrl, pin); ... if (!pin) return -EINVAL; reg = spacemit_pin_to_reg(pctrl, spin->pin); pin is an unsigned int pin id, where 0 (GPIO_0 / gmac0_rxdv on K3) is a valid pin, so rejecting it here drops the PAD config write for the first pin of every group. On K3 Pico-ITX the GMAC RGMII group lists pin 0 as its first entry, so its drive-strength / bias configuration was silently ignored. The intended guard is against spacemit_get_pin() returning NULL when the pin id isn't in the SoC's pin table. Check spin instead, which both restores PAD setup for pin 0 and prevents a NULL deref on spin->pin.

In the Linux kernel, the following vulnerability has been resolved: liveupdate: Reference count incoming FLB data Increment the incoming FLB refcount in liveupdate_flb_get_incoming() so that the FLB structure cannot be freed while the caller is actively using it. Add an additional liveupdate_flb_put_incoming() function so the caller can explicitly indicate when it is done using the FLB data. During a Live Update, a subsystem might need to hold onto the incoming File-Lifecycle-Bound (FLB) data for an extended period, such as during device enumeration. Incrementing the reference count guarantees that the data remains valid and accessible until the subsystem releases it, preventing future use-after-free bugs.

In the Linux kernel, the following vulnerability has been resolved: EDAC/igen6: Fix call trace due to missing release() When unloading the igen6_edac driver, there is a call trace: Device '(null)' does not have a release() function, it is broken and must be fixed. See Documentation/core-api/kobject.rst. WARNING: drivers/base/core.c:2567 at device_release+0x84/0x90, CPU#5: rmmod/127209 ... RIP: 0010:device_release+0x84/0x90 Call Trace: <TASK> kobject_put+0x8c/0x220 put_device+0x17/0x30 igen6_unregister_mcis+0xa2/0xe0 [igen6_edac] igen6_remove+0x82/0xb0 [igen6_edac] ... Fix the call trace by providing empty release() functions for the memory controller devices.

In the Linux kernel, the following vulnerability has been resolved: mfd: cs42l43: Sanity check firmware size Currently the code checks if a firmware was received, however it does not verify that the firmware size is larger than the firmware header. As the firmware pointer is dereferenced as a pointer to the header structure this could lead to an out of bounds memory access. Add the missing check.

In the Linux kernel, the following vulnerability has been resolved: char: tlclk: fix use-after-free in tlclk_cleanup() This patch improves the module cleanup process in the tlclk driver to prevent potential use-after-free and race conditions. Currently, the file_operations structure does not specify the .owner field, which could allow the module to be unloaded while user-space processes are still interacting with the device. Additionally, the tlclk_cleanup() function frees the alarm_events memory before ensuring that blocked processes in the waitqueue are fully awakened and that the switchover_timer has completed. To address these cases, this patch: - Sets '.owner = THIS_MODULE' in tlclk_fops to safely defer module unloading while the device is in use. - Updates tlclk_cleanup() to explicitly wake up all blocked readers (wake_up_all), properly release hardware I/O regions, and safely delete the timer (timer_delete_sync) prior to freeing memory.

In the Linux kernel, the following vulnerability has been resolved: veth: fix NAPI leak in XDP enable error path During XDP enablement in veth, if xdp_rxq_info_reg() or xdp_rxq_info_reg_mem_model() fails, the driver rolls back the changes. However, the rollback loop: for (i--; i >= start; i--) { decrements the loop index 'i' before the first iteration. This correctly skips unregistering the rxq for the failed index 'i' (as registration failed or was already cleaned up), but it also erroneously skips calling netif_napi_deli() for rq[i].xdp_napi. Since netif_napi_add() was already called for index 'i', this leaves a dangling napi_struct in the device's napi_list. When the veth device is later destroyed, the freed queue memory (which contains the leaked NAPI structure) can be reused. The subsequent device teardown iterates the NAPI list and corrupts the reallocated memory, leading to UAF. Fix this by explicitly deleting the NAPI association for the failed index 'i' before rolling back the successfully configured queues.

In the Linux kernel, the following vulnerability has been resolved: drm/xe/userptr: Hold notifier_lock for write on inject test path When CONFIG_DRM_XE_USERPTR_INVAL_INJECT=y, xe_pt_svm_userptr_pre_commit() runs vma_check_userptr() with the svm notifier_lock taken for read. The test injection causes vma_check_userptr() to call xe_vma_userptr_force_invalidate(), which feeds into xe_vma_userptr_do_inval() with drm_gpusvm_ctx.in_notifier=true. That flag tells drm_gpusvm_unmap_pages() the caller already holds notifier_lock for write and only asserts the mode. Because the caller actually holds it for read, the assertion fires: WARNING: drivers/gpu/drm/drm_gpusvm.c:1669 at \ drm_gpusvm_unmap_pages+0xd4/0x130 [drm_gpusvm_helper] Call Trace: xe_vma_userptr_do_inval+0x40d/0xfd0 [xe] xe_vma_userptr_invalidate_pass1+0x3e6/0x8d0 [xe] xe_vma_userptr_force_invalidate+0xde/0x290 [xe] vma_check_userptr.constprop.0+0x1c6/0x220 [xe] xe_pt_svm_userptr_pre_commit+0x6a3/0xc60 [xe] ... xe_vm_bind_ioctl+0x3a0a/0x4480 [xe] Acquire notifier_lock for write in pre-commit when the inject Kconfig is enabled, via new helpers xe_pt_svm_userptr_notifier_lock()/_unlock(). Rename xe_svm_assert_held_read() to xe_svm_assert_held_read_or_inject_write() so it asserts the correct mode under each build configuration. Production builds (CONFIG_DRM_XE_USERPTR_INVAL_INJECT=n) keep the existing read-mode behavior bit-for-bit. (cherry picked from commit 80ccbd97ffee8ad2e73167d826fe7be548364365)

In the Linux kernel, the following vulnerability has been resolved: hwmon: (asus_atk0110) Check package count before accessing element atk_ec_present() walks the management group package returned by the GGRP ACPI method and, for each sub-package, reads its first element: id = &obj->package.elements[0]; if (id->type != ACPI_TYPE_INTEGER) without checking that the sub-package is non-empty. ACPICA allocates the element array with exactly package.count entries, so for a sub-package with a zero count this reads past the allocation. The sibling function atk_debugfs_ggrp_open() performs the same access but skips empty packages with a package.count check first. Add the same check to atk_ec_present() so a malformed firmware package cannot trigger an out-of-bounds read.

In the Linux kernel, the following vulnerability has been resolved: inet: frags: strip GSO state from fragments before reassembly A virtio_net_hdr (tun/tap, or AF_PACKET with PACKET_VNET_HDR) can mark an IPv4 or IPv6 fragment as GSO; nothing relates gso_type to frag_off. inet_frag_reasm_prepare()/inet_frag_reasm_finish() keep the first fragment's skb as the head of the reassembled datagram, including its shinfo->gso_size/gso_type/gso_segs, and chain the remaining fragments on frag_list with whatever linear/paged layout they arrived with. After ip_defrag() (ip_local_deliver(), nf_defrag_ipv4, ...) the reassembled skb therefore still claims to be GSO (SKB_GSO_DODGY), and the next software segmentation point - udp_rcv_segment() on local delivery, validate_xmit_skb(), or the ip_finish_output_gso() slow path - hands it to skb_segment(). skb_segment()'s frag_list walk assumes GRO-shaped input and hits one of its BUG_ON()s. Two writes to a tap by an unprivileged user in its own userns are enough: kernel BUG at net/core/skbuff.c:4899! Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI CPU: 0 UID: 1000 PID: 82 Comm: poc Not tainted 7.2.0-pentest+ #2 RIP: 0010:skb_segment+0x20ca/0x48b0 Call Trace: <TASK> __udp_gso_segment+0x29a/0x27d0 udp4_ufo_fragment+0x458/0x6c0 inet_gso_segment+0x429/0x1340 skb_mac_gso_segment+0x233/0x4f0 __skb_gso_segment+0x308/0x660 udp_queue_rcv_skb+0x440/0xad0 udp_unicast_rcv_skb+0xc7/0x2c0 udp_rcv+0x16ce/0x2260 ip_protocol_deliver_rcu+0x197/0x2d0 ip_local_deliver+0x430/0x690 ip_rcv+0x16f/0x1f0 __netif_receive_skb_one_core+0x15e/0x1c0 __netif_receive_skb+0x1e/0x110 netif_receive_skb+0xf6/0x5c0 tun_rx_batched.isra.0+0x3ab/0x790 tun_get_user+0x17c3/0x3550 tun_chr_write_iter+0xba/0x1b0 vfs_write+0x646/0x1130 </TASK> Kernel panic - not syncing: Fatal exception in interrupt This runs with BH disabled, so it is a panic rather than an oops. The same is reachable with CAP_NET_RAW in a netns where a defrag point precedes a GSO point, and from a guest whose VMM forwards virtio_net_hdr to a tap. The SKB_GSO_DODGY frag_list checks added by commit 3dcbdb134f32 ("net: gso: Fix skb_segment splat when splitting gso_size mangled skb having linear-headed frag_list") and by commit 9e4b7a99a03a ("net: gso: fix panic on frag_list with mixed head alloc types") do not cover it: page-backed heads skip them, and kmalloc heads skip them when gso_size == skb_headlen(head), which the sender controls. An skb entering a frag queue is an IP fragment by definition and cannot legitimately carry GSO state: GRO does not merge fragments and the stack segments before it fragments, so only untrusted sources are affected. This has been reachable since commit f43798c27684 ("tun: Allow GSO using virtio_net_hdr"), the first path that let userspace attach GSO metadata to an IP fragment. Reset the GSO fields of every fragment as it is queued, in inet_frag_queue_insert(), which IPv4, IPv6, nf_conntrack_reasm and 6lowpan reassembly share; then neither the head nor the frag_list members of the reassembled skb carry them (the members matter too: the ip_do_fragment()/ip6_fragment() fast paths send them out as they are). The head may remain CHECKSUM_PARTIAL; that is already accepted on receive and resolved by skb_checksum_help() in ip_do_fragment()/ip6_fragment() on forward. Tested on top of net.git (dc4b95b8fee9), x86_64: the tap reproducer above, two further IPv4 frag_list geometries that reach BUG_ON(i >= nfrags) and BUG_ON(!list_skb->head_frag), and an IPv6 fragment-header variant (udp6_ufo_fragment()) each panic the unpatched kernel; with this patch all four datagrams are delivered intact and nothing is logged.

In the Linux kernel, the following vulnerability has been resolved: cxl/test: Fix __fortify_panic Fix a runtime assertion in setup_xor_mapping(). Fortify complains that it is potentially overflowing the xormaps array per __counted_by(nr_maps). Quiet the false positive by initializing @nr_maps earlier. memcpy: detected buffer overflow: 32 byte write of buffer size 0 WARNING: lib/string_helpers.c:1036 at __fortify_report+0x4d/0xa0, CPU#8: modprobe/2728 Call Trace: __fortify_panic+0xd/0xf setup_xor_mapping+0x6c/0xa0 [cxl_translate] [ dj: Fixed up @nr_entries to @nr_maps in commit log. ]

In the Linux kernel, the following vulnerability has been resolved: riscv: drop __init from vec_check_unaligned_access_speed_all_cpus This function runs within a kthread and need not necessarily finish before system finishes boot and free_initmem() unmaps the .init.text section. This function makes calls to SBI for probing unaligned access speed, and if this is slow for some reason (say some debug prints were added to SBI), the kthread can still be running at this point and result in an instruction page fault when trying to fetch from the freed region. [ 25.642087] Unable to handle kernel paging request at virtual address ffffffff80a04ef8 [ 25.646694] Current vec_check_unali pgtable: 4K pagesize, 48-bit VAs, pgdp=0x00004000316e9000 [ 25.653170] [ffffffff80a04ef8] pgd=000010004be7e401, p4d=000010004be7e401, pud=000010004be7e001, pmd=000010000c3000e3 [ 25.661244] Oops [#1] [ 25.662997] Modules linked in: [ 25.665357] CPU: 3 UID: 0 PID: 42 Comm: vec_check_unali Not tainted 7.0.0-tt-blackhole-asrinivasan-00007-g30ff73f18211 #570 PREEMPTLAZY [ 25.674669] Hardware name: Tenstorrent Blackhole (DT) [ 25.678545] epc : vec_check_unaligned_access_speed_all_cpus+0x18/0x2c [ 25.683458] ra : vec_check_unaligned_access_speed_all_cpus+0x18/0x2c [ 25.688372] epc : ffffffff80a04ef8 ra : ffffffff80a04ef8 sp : ffff8f8000203e20 [ 25.693874] gp : ffffffff814dc168 tp : ffffaf8001ad9900 t0 : 0000000000000000 [ 25.699401] t1 : fffffffffffffff0 t2 : ffffaf8001ad9a10 s0 : ffff8f8000203e30 [ 25.704912] s1 : ffffaf80018dc780 a0 : 0000000000000000 a1 : 0000000000000002 [ 25.710407] a2 : 00000000000001f0 a3 : 0000000000000018 a4 : 0000000000000000 [ 25.715917] a5 : 0000000000000000 a6 : ffffaf8001c03d98 a7 : ffffaf8001c03e30 [ 25.721419] s2 : ffff8f8000023c98 s3 : ffffaf8001aa1240 s4 : ffffffff80a04ee0 [ 25.726937] s5 : 0000000000000000 s6 : 0000000000000000 s7 : 0000000000000000 [ 25.732450] s8 : 0000000000000000 s9 : 0000000000000000 s10: 0000000000000000 [ 25.737944] s11: 0000000000000000 t3 : 0000000000000002 t4 : 0000000000000402 [ 25.743481] t5 : 0000000000000040 t6 : 0000000000000004 ssp : 0000000000000000 [ 25.749024] status: 0000000200000120 badaddr: ffffffff80a04ef8 cause: 000000000000000c [ 25.755060] [<ffffffff80a04ef8>] vec_check_unaligned_access_speed_all_cpus+0x18/0x2c [ 25.760964] [<ffffffff80047a10>] kthread+0xd8/0xfc [ 25.764660] [<ffffffff80010c48>] ret_from_fork_kernel+0x18/0x1c4 [ 25.769220] [<ffffffff80895fe6>] ret_from_fork_kernel_asm+0x16/0x18 [ 25.774018] Code: cccc cccc cccc cccc cccc cccc cccc cccc cccc cccc (cccc) cccc Drop __init from its signature so that this doesn't happen.

In the Linux kernel, the following vulnerability has been resolved: iommufd/viommu: Release the igroup lock on the vdevice_size error path iommufd_vdevice_alloc_ioctl() takes idev->igroup->lock, then validates the driver's vdevice_size against the core structure size with a WARN_ON_ONCE. On failure that guard jumps to out_put_idev, below out_unlock_igroup, so it skips the mutex_unlock(), leaving the igroup lock held and deadlocking the next vDEVICE operation on that group. Jump to out_unlock_igroup instead.

In the Linux kernel, the following vulnerability has been resolved: bpf: Disable xfrm_decode_session hook attachment BPF LSM programs can currently attach to xfrm_decode_session(). That hook may return an error, but security_skb_classify_flow() calls it from a void path and triggers BUG_ON() if an error is returned. Disable BPF attachment to the hook to prevent a BPF LSM program from turning packet classification into a full panic.

In the Linux kernel, the following vulnerability has been resolved: cxl/fwctl: Fix __fortify_panic Fix a runtime assertion in cxlctl_get_supported_features(). Fortify complains that it is potentially overflowing the entries array per __counted_by_le(num_entries). Quiet the false positive by initializing @num_entries earlier. memcpy: detected buffer overflow: 48 byte write of buffer size 0 WARNING: lib/string_helpers.c:1036 at __fortify_report+0x4d/0xa0, CPU#7: fwctl/1398 RIP: 0010:__fortify_report+0x50/0xa0 Call Trace: __fortify_panic+0xd/0xf cxlctl_get_supported_features.cold+0x23/0x35 [cxl_core]

In the Linux kernel, the following vulnerability has been resolved: batman-adv: gw: acquire ethernet header only after skb realloc The pskb_may_pull() called by batadv_get_vid() could reallocate the buffer behind the skb. Variables which were pointing to the old buffer need to be reassigned to avoid an use-after-free.

In the Linux kernel, the following vulnerability has been resolved: ntfs3: fix out-of-bounds read in decompress_lznt decompress_lznt() does not validate array index bounds before accessing the decompression table. A corrupted NTFS3 image with invalid compressed data can trigger an out-of-bounds read. Add index bounds checking to prevent the OOB access.

Cross-Site Scripting (XSS) vulnerability in the DNS lookup/management component of oPanel before v1.20.25 allows remote attackers to execute arbitrary JavaScript and perform session hijacking via a crafted DNS TXT record

In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_expect: use conntrack GC to reap expectations This patch replaces the timer API by GC worker approach for expectations, as it already happened in many other subsystems. Use the existing conntrack GC worker to iterate over the local list of expectations in the master conntrack to reap expired expectations. Check IPS_HELPER_BIT to run GC for expectations, set it on for nft_ct expectation which nevers sets it. Hold the expectation spinlock while iterating over the master conntrack expectation list to synchronize with nf_ct_remove_expectations(). This also performs runtime packet path garbage collection through the expectation insertion and lookup functions while walking over one of the chains of the global expectation hashtables. Unconfirmed conntrack entries are skipped since ct->ext can be reallocated and dying are skipped since those will be gone soon. Set on IPS_HELPER_BIT if the helper ct extension is added, then the new GC worker does not need to bump the ct refcount to check if the ct->ext helper is available. This removes the extra bump on the refcount for expectation timers, this allows to remove several nf_ct_expect_put() calls after the unlink, after this update only refcount remains at 1 while on the expectation hashes. This patch implicitly addresses a race with the existing timer API allowing an expectation to access a stale exp->master pointer which has been already released when expectation removal loses races with an expiring timer, ie. timer_del() reporting false. Add a new NF_CT_EXPECT_DEAD flag to reap this expectation via GC. This is needed by nf_conntrack_unexpect_related() which is called in error paths to invalidate newly created expectations that has been added into the hashes. These expectactions cannot be inmediately released as GC or nf_ct_remove_expectations() could race to make it. On expectation insert, the runtime GC reaps stale expectations before checking the expectation limit set by policy. Set current timestamp in nf_ct_expect_alloc(), then add the expectation policy timeout (or custom timeout specified added on top of this) to specify the expectation lifetime.

In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix iommu domain lifetime race during device removal When force_iova mode is enabled, amdxdna_remove() frees xdna->domain. If amdxdna_gem_obj_free() is called after device removal, it may attempt to access xdna->domain, resulting in a use-after-free. Fix the race by adding freeing xdna->domain as a managed release action, so its lifetime is managed by DRM and remains valid until all managed resources are released.

In the Linux kernel, the following vulnerability has been resolved: tracing/mmiotrace: Add NULL check for mmio_trace_array in logging functions mmio_trace_rw() and mmio_trace_mapping() retrieve mmio_trace_array into tr and pass it to __trace_mmiotrace_rw() and __trace_mmiotrace_map(). If these functions are invoked while mmio_trace_array is NULL (e.g. before initialization or after disabled), accessing tr->array_buffer.buffer will result in a NULL pointer dereference crash. Fix this by adding an explicit NULL check for tr at the beginning of __trace_mmiotrace_rw() and __trace_mmiotrace_map().

In the Linux kernel, the following vulnerability has been resolved: perf tools: Use perf_env__get_cpu_topology() in machine__resolve() machine__resolve() accesses env->cpu[al->cpu].socket_id after checking al->cpu >= 0 and env->cpu != NULL, but without validating al->cpu against env->nr_cpus_avail. Since al->cpu comes from the untrusted perf.data sample, a crafted file with a large CPU index causes an out-of-bounds heap read. Use perf_env__get_cpu_topology() which validates both NULL and bounds. Also bounds-check al->cpu before the cast to struct perf_cpu (int16_t): without this, values like 65536 silently truncate to 0, bypassing the accessor's internal check and returning CPU 0's topology.

An issue in the seekdir() function (/dirent/mod.rs) of relibc commit 61f42d allows attackers to cause a Denial of Service (DoS) via a crafted input.

Incorrect access control in the getTracerouteCfg function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to obtain traceroute diagnostic logs via sending a crafted POST request to /cgi-bin/cstecgi.cgi.

Incorrect access control in the getCloudSrvCheckStatus function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to obtain cloud firmware check status information via sending a crafted POST request to /cgi-bin/cstecgi.cgi.

Incorrect access control in the getIpPortFilterRules function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to obtain IP and port filtering rules via sending a crafted POST request to /cgi-bin/cstecgi.cgi.

Incorrect access control in the getSyslogCfg function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to obtain syslog-related configuration via sending a crafted POST request to /cgi-bin/cstecgi.cgi.

Incorrect access control in the getCrpcCfg function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to obtain cloud remote-control status and URL information via sending a crafted POST request to /cgi-bin/cstecgi.cgi.

Incorrect access control in the getDdnsCfg function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to obtain DDNS configuration, including domain, username, and password, via sending a crafted POST request to /cgi-bin/cstecgi.cgi.