CVE Feed

In the Linux kernel, the following vulnerability has been resolved: soc: xilinx: Fix race condition in event registration The zynqmp_power driver registers handlers for suspend and subsystem restart events using register_event(). However, the work structures (zynqmp_pm_init_suspend_work and zynqmp_pm_init_restart_work) used by these handlers were allocated and initialized after the registration call. This created a race window where, if the firmware triggered an event immediately after registration but before allocation, the callback (suspend_event_callback or subsystem_restart_event_callback) would dereference a NULL pointer in work_pending(), leading to a crash. Fix this by allocating and initializing the work structures before registering the events.

In the Linux kernel, the following vulnerability has been resolved: scsi: hisi_sas: Add slave_destroy interface for v3 hw WARNING is triggered when executing link reset of remote PHY and rmmod SAS driver simultaneously. Following is the WARNING log: WARNING: CPU: 61 PID: 21818 at drivers/base/core.c:1347 __device_links_no_driver+0xb4/0xc0 Call trace: __device_links_no_driver+0xb4/0xc0 device_links_driver_cleanup+0xb0/0xfc __device_release_driver+0x198/0x23c device_release_driver+0x38/0x50 bus_remove_device+0x130/0x140 device_del+0x184/0x434 __scsi_remove_device+0x118/0x150 scsi_remove_target+0x1bc/0x240 sas_rphy_remove+0x90/0x94 sas_rphy_delete+0x24/0x3c sas_destruct_devices+0x64/0xa0 [libsas] sas_revalidate_domain+0xe4/0x150 [libsas] process_one_work+0x1e0/0x46c worker_thread+0x15c/0x464 kthread+0x160/0x170 ret_from_fork+0x10/0x20 ---[ end trace 71e059eb58f85d4a ]--- During SAS phy up, link->status is set to DL_STATE_AVAILABLE in device_links_driver_bound, then this setting influences __device_links_no_driver() before driver rmmod and caused WARNING. Add the slave_destroy interface to make sure link is removed after flush workque.

In the Linux kernel, the following vulnerability has been resolved: iommufd: Take dma_resv lock before dma_buf_unpin() in release path dma_buf_unpin() requires the caller to hold the exporter's dma_resv lock: void dma_buf_unpin(struct dma_buf_attachment *attach) { ... dma_resv_assert_held(dmabuf->resv); ... } iopt_release_pages() calls dma_buf_unpin() without taking that lock, so every iommufd_ioas_destroy()/iommufd_ioas_unmap() that releases the last reference on a DMABUF-backed iopt_pages triggers a WARN. This was hit while running tools/testing/selftests/iommu/iommufd: WARNING: drivers/dma-buf/dma-buf.c:1137 at dma_buf_unpin+0x62/0x70 RIP: 0010:dma_buf_unpin+0x62/0x70 Call Trace: <TASK> dma_buf_unpin+0x62/0x70 iopt_release_pages+0xe4/0x190 iopt_unmap_iova_range+0x1c7/0x290 iopt_unmap_all+0x1a/0x30 iommufd_ioas_destroy+0x1d/0x50 iommufd_fops_release+0x93/0x150 __fput+0xfc/0x2c0 __x64_sys_close+0x3d/0x80 do_syscall_64+0x65/0x180 </TASK> Take the dma_resv lock around dma_buf_unpin() in iopt_release_pages(), matching the iopt_map_dmabuf() convention. dma_buf_detach() acquires the reservation lock internally, so it must remain outside the locked region.

In the Linux kernel, the following vulnerability has been resolved: apparmor: fix potential UAF in aa_replace_profiles The function aa_replace_profiles was accessing udata->size after calling aa_put_loaddata(udata), causing a potential UAF. Fixed this by saving the size to a local variable before dropping the reference.

In the Linux kernel, the following vulnerability has been resolved: HID: core: Fix OOB read in hid_get_report for numbered reports When a caller passes a size of 0 to hid_report_raw_event() for a numbered report, the function originally called hid_get_report() before performing any size validation. Inside hid_get_report(), if the report is numbered (report_enum->numbered is true), it unconditionally dereferences data[0] to extract the report ID. With a size of 0, this results in an out-of-bounds read or kernel panic. Fix this by moving the numbered report size validation check before the call to hid_get_report(), ensuring that size is at least 1 before dereferencing the data pointer.

In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Fix wrong domain value verification with EP11 CPRBs There is a wrong upper limit check for the domain value when an EP11 CPRB is processed for sending to a crypto card. This check is only active on custom device nodes but may lead to access heap memory behind perms->adm when an administrative CPRB is sent. Add correct limit (AP_DOMAINS = 256) checking to fix this.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: hold conn in hci_connect_acl/le_sync() callbacks There is theoretical UAF if the conn is freed while the hci_sync task is running. Hold refcount to avoid that.

In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: validate external BO copy bounds for both stride paths vmw_external_bo_copy() trusts caller-supplied offsets, strides, and heights and operates on imported dma-buf vmaps: - The equal-stride memcpy() bound was clamped after subtracting the offsets from dst_size and src_size; an offset larger than the BO size wraps the unsigned subtraction to a huge value and the resulting memcpy() runs off the end of the vmap. dst_stride * height is also a u32 multiplication that can overflow. - The non-equal-stride row-by-row path had no bound at all. The loop touches bytes through offset + (height - 1) * stride + width_in_bytes, with only a WARN_ON(dst_stride < width_in_bytes), and could likewise step past the end of either mapping. The offsets and strides are derived from STDU/SOU plane state, so a configured CRTC submitting a crafted atomic commit on an imported framebuffer can reach this path. Validate the exact row-copy endpoint against each BO's size up front using check_mul_overflow() and check_add_overflow(). Use the bulk memcpy() path only when width_in_bytes covers the whole stride; otherwise copy one row at a time so partial-row updates near the bottom of a framebuffer remain valid. Also reject zero strides and stride < width_in_bytes, both of which the row-by-row path cannot represent safely.

In the Linux kernel, the following vulnerability has been resolved: tools/power/x86/intel-speed-select: Harden daemon pidfile open Avoid symlink-based pidfile clobbering by opening the pidfile with O_NOFOLLOW and validating it with fstat() before locking/writing. The daemon currently uses a fixed pidfile path under /tmp. A local unprivileged user can pre-create a symlink at that path and cause a root-run daemon instance to write into an attacker-chosen file.

In the Linux kernel, the following vulnerability has been resolved: s390/dasd: Fix undersized format-check buffer fmt_buffer_size in dasd_eckd_check_device_format() is declared as int, even though one of the multiplicands, sizeof(struct eckd_count), is a size_t. The expression trkcount * rpt_max * sizeof(struct eckd_count) is therefore correctly evaluated at 64-bit width, but the result is silently truncated when it is stored back into the 32-bit fmt_buffer_size variable. For a sufficiently large track range (start_unit/stop_unit are caller-controlled) this truncation yields a buffer size far smaller than the number of tracks actually requested. kzalloc() then succeeds with an undersized allocation, while the subsequent channel program build still operates on the untruncated track count and writes past the end of that buffer. Compute the buffer size with check_mul_overflow() and keep it in a size_t, so that a value that no longer fits results in -EINVAL instead of a silently truncated allocation size.

In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_nat: reject unsupported target families xt_nat SNAT and DNAT target handlers assume IP-family conntrack state is present and can dereference a NULL pointer when instantiated from an unsupported family through nft_compat. A bridge-family compat rule can therefore trigger a NULL-dereference in nf_nat_setup_info(). Reject non-IP families in xt_nat_checkentry() so unsupported targets cannot be installed. Keep NFPROTO_INET allowed for valid inet NAT compat users and leave the runtime fast path unchanged. [ The crash was fixed via 9dbba7e694ec ("netfilter: nft_compat: ebtables emulation must reject non-bridge targets"), so this patch is no longer critical. Nevertheless, NAT is only relevant for ipv4/ipv6, so this extra family check is a good idea in any case. ]

In the Linux kernel, the following vulnerability has been resolved: ptp: vmclock: prevent read-only mappings from becoming writable vmclock_miscdev_mmap() rejects writable mappings of the shared vmclock ABI page with -EROFS, but leaves VM_MAYWRITE set. Userspace can map the page read-only and then upgrade it to writable with mprotect(), after which the guest can corrupt the host-written timekeeping data (sequence counter, UTC time, TSC offset) that the vmclock ABI defines as read-only. Clear VM_MAYWRITE on the read-only path so the mapping cannot be upgraded, as i915 does for its read-only objects and as fixed in drm/vc4 (CVE-2026-68445) and drm/panthor (CVE-2024-53071).

In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - only expose sysfs attributes on control interface When the driver was converted to use the driver core to instantiate device attributes (via .dev_groups in the usb_driver structure), the attributes started appearing on all interfaces bound to the driver. Since the ims-pcu driver manually claims the secondary data interface during probe, the driver core automatically creates the sysfs attributes for that interface as well. However, the driver only supports these attributes on the primary control interface. Data interfaces lack the necessary descriptors and internal state to handle these requests, and accessing them can lead to unexpected behavior or crashes. Fix this by updating the is_visible() callbacks for both the main and OFN attribute groups to verify that the interface being accessed is indeed the control interface.

Incorrect access control in the getWiFiApcliScan function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to trigger wireless scans and retrieve AP-client scan results via sending a crafted POST request to /cgi-bin/cstecgi.cgi.

Incorrect access control in the getUrlFilterRules function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to obtain DMZ configuration information via sending a crafted POST request to /cgi-bin/cstecgi.cgi.

Incorrect access control in the getDmzCfg function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to obtain DMZ configuration information via sending a crafted POST request to /cgi-bin/cstecgi.cgi.

Incorrect access control in the getParentalRules function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to obtain parental-control rules via sending a crafted POST request to /cgi-bin/cstecgi.cgi.

Incorrect access control in the getDeviceInfo function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to obtain device identification details via sending a crafted POST request to /cgi-bin/cstecgi.cgi.

Incorrect access control in the startSlaveReboot function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to arbitrarily force a reboot via sending a crafted MQTT message.

An issue in BitChat for iOS v1.15.0 allows a remote attacker to cause a denial of service via an unauthenticated MESSAGE packet into the mesh gossip cache

Incorrect access control in the RebootSystem function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to arbitrarily force an immediate reboot via sending a crafted POST request to /cgi-bin/cstecgi.cgi.

xipblog module v2.0.1 and before for PrestaShop allows unauthenticated remote attackers to inject arbitrary JavaScript via the name and content parameters in ajax.php. The input is stored in the database without HTML sanitization and rendered in Smarty templates without output escaping, resulting in Stored Cross-Site Scripting (XSS). When an administrator reviews comments in the back office, the payload executes with admin-level session context, leading to full store compromise.

file_picker (aka flutter_file_picker) for Flutter, all versions through 10.3.10, is vulnerable to path traversal (CWE-22) in its Android implementation. The openFileStream() method in FileUtils.kt uses the DISPLAY_NAME obtained from ContentResolver.query() directly in file path construction without sanitization. A malicious Android app with a crafted ContentProvider can return a filename containing ../ sequences, causing the plugin to create arbitrary files and directories outside the intended cache directory within the victim app's internal storage. Existing files are not overwritten due to an existence check.

An issue in the JsonSanitizer.sanitize() component of OWASP json-sanitizer v1.2.3 allows attackers to cause a Denial of Service (DoS) via a crafted input.

vLLM up to and including 0.17.0 allows remote attackers to cause a Denial of Service via memory exhaustion. The AsyncMediaIO.fetch_audio and AsyncMediaIO.fetch_image functions in multimodal/inputs.py fetch user-supplied media URLs using aiohttp and call r.read() without enforcing a maximum response size, allowing an attacker to exhaust server memory by providing a URL to an arbitrarily large file.

Incorrect access control in the getSysStatusCfg function of TOTOLINK T6 4.1.5cu.748_B20211015 allows unauthenticated attackers to obtain sensitive information such as operation mode, firmware version, serial number, WAN/LAN IP addresses, WiFi SSID, encryption keys, and connected client statistics via sending a crafted POST request to /cgi-bin/cstecgi.cgi.

WordPress plugin (Spiffy Plugin) before 5.0.9 is affected by Stored Cross-Site Scripting in Event Title field. An authenticated attacker with the lowest privileged role (contributor) can exploit this to redirect user to malicious site or control the account.

WordPress plugin (Bit Assist) before 1.7.2 is affected by Stored Cross-Site Scripting in Call-To-Action feature. An authenticated attacker with the privileged role (admin) can exploit this to redirect user to malicious site or control the account.

In the Linux kernel, the following vulnerability has been resolved: mm: mglru: fix stale batch updates after memcg reparenting The mglru page table walker batches per-generation size deltas in walk->nr_pages while walking page tables without holding the lruvec lock. The reset_batch_size() later folds those deltas into walk->lruvec under the lruvec lock. The page table walker can run concurrently with the memcg reparenting path as follows: CPU0 CPU1 ==== ==== walk_mm --> walk_page_range --> update_batch_size --> walk->nr_pages += delta mem_cgroup_css_offline --> memcg_reparent_objcgs --> lock lruvec lru_gen_reparent_memcg --> reparent child folios to parent unlock lruvec lock lruvec reset_batch_size --> child lrugen->nr_pages += delta This will trigger the following warning in lru_gen_exit_memcg(): VM_WARN_ON_ONCE(memchr_inv(lruvec->lrugen.nr_pages, 0, sizeof(lruvec->lrugen.nr_pages))); And the user-visible impact of underestimated nr_pages in MGLRU was premature OOMs because MGLRU does not try to reclaim memory when nr_pages reaches zero, but there are still more pages. To fix it, make reset_batch_size() check CSS_DYING under RCU before flushing the pending batch. A non-dying memcg keeps the original lruvec stable against RCU-delayed offlining; a dying memcg redirects the deltas to the first non-dying ancestor.

In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: wake linked drain waiters on unlink snd_pcm_drain() on a linked stream parks an on-stack wait entry on the drained peer's runtime->sleep, and after schedule_timeout() removes it only if that peer is still found in the caller's group. If group membership changes during the wait and the sleep ends by signal or timeout (so autoremove_wake_function() does not run), finish_wait() is skipped and snd_pcm_drain() returns with the entry still queued on that stream's sleep list; a later wake_up() then walks a freed stack frame. This is reachable by unlinking either the drained or the draining stream. Unlike the close path (snd_pcm_drop() -> snd_pcm_post_stop()), snd_pcm_unlink() never wakes the sleep queues. Wake every group member under the group lock before the membership change, so a linked drainer is released and drops its entry while the streams are still grouped. The window was opened when snd_pcm_link_rwsem stopped being held across the wait and the removal became conditional on group membership (see Fixes). The later switch to finish_wait() kept that conditional removal, so the signal/timeout case remained.

In the Linux kernel, the following vulnerability has been resolved: perf sched: Fix register_pid() overflow, strcpy, and BUG_ON register_pid() has several issues when processing untrusted perf.data: 1. Integer overflow: (pid + 1) * sizeof(struct task_desc *) can wrap to a small value on 32-bit systems when pid is large (e.g. 0x40000000), causing realloc to return a tiny buffer followed by out-of-bounds writes in the initialization loop. 2. Heap buffer overflow: strcpy(task->comm, comm) copies the untrusted comm string into a fixed 20-byte COMM_LEN buffer with no length check. 3. BUG_ON on allocation failure: perf.data is untrusted input, so allocation failures should be handled gracefully rather than killing the process. 4. Realloc of sched->tasks assigned directly back, leaking the old pointer on failure; nr_tasks incremented before the realloc, leaving corrupted state on failure. Cap pid at PID_MAX_LIMIT (4194304, matching the kernel's maximum on 64-bit), replace strcpy with strlcpy, guard against NULL comm, replace BUG_ON with NULL returns using safe realloc patterns, and add NULL checks in callers that dereference the result.

In the Linux kernel, the following vulnerability has been resolved: net/mlx5: LAG, MPESW, Fix missing complete() on devcom error mlx5_mpesw_work() returned without calling complete() when mlx5_lag_get_devcom_comp() returned NULL. A caller that queued the work and waited on mpesww->comp would block indefinitely. Funnel the early-return path through a new "complete" label so the waiter is always woken.

In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_fq_codel: Do not call qdisc_tree_reduce_backlog during peek before restoring qlen Whenever fq_codel drops packets during peek, it calls qdisc_tree_reduce_backlog. An issue arises because it calls qdisc_tree_reduce_backlog before it reincrements the qlen. If qlen drops to zero, but peek returns an skb, the parent's qlen_notify callback will be executed even though fq_codel still has 1 packet on the queue and, thus, will mistakenly deactivate the parent's class causing issues like a recent report [1] and a wild memory access in qfq: [ 29.371146][ T360] Oops: general protection fault, probably for non-canonical address 0xfbd59c0000000024: 0000 [#1] SMP KASAN NOPTI [ 29.371666][ T360] KASAN: maybe wild-memory-access in range [0xdead000000000120-0xdead000000000127] [ 29.371987][ T360] CPU: 6 UID: 0 PID: 360 Comm: tc Not tainted 7.1.0-rc5-00285-gc530e5b2dbc6-dirty #82 PREEMPT(full) [ 29.372384][ T360] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 29.372620][ T360] RIP: 0010:qfq_deactivate_agg (include/linux/list.h:1029 (discriminator 2) include/linux/list.h:1043 (discriminator 2) net/sched/sch_qfq.c:1369 (discriminator 2) net/sched/sch_qfq.c:1395 (discriminator 2)) sch_qfq [ 29.373544][ T360] RSP: 0018:ffff888102417370 EFLAGS: 00010216 [ 29.373800][ T360] RAX: 0000000000000000 RBX: ffff88811224d568 RCX: dffffc0000000000 [ 29.374079][ T360] RDX: 1ffff11021fe1543 RSI: ffff88810ff0aa00 RDI: dffffc0000000000 [ 29.374368][ T360] RBP: ffff88811224c280 R08: dead000000000122 R09: 1bd5a00000000024 [ 29.374649][ T360] R10: fffffbfff7940329 R11: fffffbfff7940329 R12: 0000000000000000 [ 29.374926][ T360] R13: dead000000000100 R14: ffff88811224d580 R15: ffff88811224d578 [ 29.375207][ T360] FS: 00007f5b794e5780(0000) GS:ffff88815d1e9000(0000) knlGS:0000000000000000 [ 29.375545][ T360] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 29.375823][ T360] CR2: 000055ffb091f000 CR3: 000000010a305000 CR4: 0000000000750ef0 [ 29.376103][ T360] PKRU: 55555554 [ 29.376258][ T360] Call Trace: [ 29.376401][ T360] <TASK> ... [ 29.376885][ T360] qfq_reset_qdisc (net/sched/sch_qfq.c:357 net/sched/sch_qfq.c:1487) sch_qfq [ 29.377074][ T360] qdisc_reset (net/sched/sch_generic.c:1057) [ 29.377414][ T360] __qdisc_destroy (net/sched/sch_generic.c:1096) [ 29.377600][ T360] qdisc_graft (net/sched/sch_api.c:1062 net/sched/sch_api.c:1053 net/sched/sch_api.c:1159) [ 29.378593][ T360] tc_get_qdisc (net/sched/sch_api.c:1528 net/sched/sch_api.c:1556) Fix this by only calling qdisc_tree_reduce_backlog in peek after the qlen is restored. [1] http://lore.kernel.org/netdev/CAN2cbVe79oj0O9==m4+4x3v+O+qzRagA=2=wkrp9i9=CqYvyZA@mail.gmail.com/

An OS command injection vulnerability in the killSessionSync function (lib/agent-runtime.ts) of 23blocks-OS ai-maestro v0.24.17 allows attackers to execute arbitrary commands via a crafted input.

An issue in the with_argv function (/unistd/mod.rs) of relibc commit 61f42d allows attackers to cause a Denial of Service (DoS) via a crafted input.

grpc-gateway v2.28.0 is vulnerable to Incorrect Access Control. The application processes the X-HTTP-Method-Override header in ServeMux.ServeHTTP without restricting allowed methods. When a POST request with Content-Type application/x-www-form-urlencoded includes this header, the request method is rewritten to an arbitrary attacker-supplied value before routing. This allows bypassing method-based access controls enforced by upstream proxies or WAFs.

Cross Site Scripting vulnerability in Omeka S v.4.2.0 allows a remote attacker to execute arbitrary code via the site navigation custom URL function

In the Linux kernel, the following vulnerability has been resolved: igc: remove napi_synchronize() in igc_down() When an AF_XDP zero-copy application is killed abruptly, the XSK pool is torn down but NAPI keeps polling. igc_clean_rx_irq_zc() then returns the full budget on every poll, so napi_complete_done() never clears NAPI_STATE_SCHED. igc_down() calls napi_synchronize() before napi_disable(), so it spins forever waiting for that bit and the interface never goes down. Drop the napi_synchronize() and let napi_disable() do the job -- it sets NAPI_STATE_DISABLE, which forces the stuck poll to complete. Reorder it ahead of igc_set_queue_napi() so the NAPI mapping is cleared only after polling has stopped, matching the recent igb fix b1e067240379.

In the Linux kernel, the following vulnerability has been resolved: s390/zcrypt: Fix missing mem scrub at clear key import in cca_clr2cipherkey() The helper function _ip_cprb_helper() uses internal buffer memory for building and processing CPRBs. After use this buffer was never scrubbed which could lead to leaving for example clear key material in memory which could be exposed via tricky reuse of this same memory. Extend the _ip_cprb_helper() function with another parameter 'scrub' used to steer scrubbing of this buffer. So now the caller has the opportunity to decide if scrubbing is needed or not. Extend the clear key to secure key token import process in function cca_clr2cipherkey() to tell the helper function from above to scrub the cprb buffer when the clear key value is part of the request data. Add explicit scrubbing on return from function cca_clr2cipherkey() for the random EXOR buffer and the cprb buffer. Overall this cleans the internal used buffer in case of clear key import to prevent sensitive data to get exposed.

In the Linux kernel, the following vulnerability has been resolved: wifi: wcn36xx: fix OOB read from short trigger BA firmware response The firmware response length is only checked against sizeof(*rsp) (20 bytes), but when candidate_cnt >= 1, a 22-byte candidate struct is read at buf + 20 without verifying the response contains it. This causes an out-of-bounds read of stale heap data, corrupting the BA session state. Add validation that the response includes the candidate data.

In the Linux kernel, the following vulnerability has been resolved: ACPI: processor_idle: Mark LPI enter functions as __cpuidle When function tracing or Kprobes is enabled, entering an ACPI Low Power Idle (LPI) state triggers the following RCU splat: RCU not on for: acpi_idle_lpi_enter+0x4/0xd8 WARNING: CPU: 8 PID: 0 at include/linux/trace_recursion.h:162 function_trace_call+0x1e8/0x228 The acpi_idle_lpi_enter() function is invoked within the cpuidle path after RCU has already been disabled for the current local CPU. Consequently, ftrace's function_trace_call() expects RCU to be actively watching before recording trace data, emitting a warning if it is not. Fix this by annotating acpi_idle_lpi_enter(), the generic __weak stub, and the RISC-V implementation of acpi_processor_ffh_lpi_enter() with __cpuidle. This moves these functions into the '.cpuidle.text' section, implicitly disabling ftrace instrumentation (notrace) along this sensitive path and preventing trace-induced RCU warnings during idle entry.

In the Linux kernel, the following vulnerability has been resolved: of: reserved_mem: prevent OOB when too many dynamic regions are defined On boot, fdt_scan_reserved_mem() saves each dynamically-placed /reserved-memory subnode into a local array of size MAX_RESERVED_REGIONS. If the device tree defines more than MAX_RESERVED_REGIONS dynamically-placed regions, fdt_scan_reserved_mem() writes past the end of the local array. Add a bounds check that logs an error and skips the excess regions, restoring the original behavior.

In the Linux kernel, the following vulnerability has been resolved: sctp: validate Adaptation Indication parameter length The Adaptation Layer Indication parameter contains a fixed 32-bit Adaptation Code Point after its parameter header. However, sctp_verify_param() accepts a header-only parameter because the generic parameter walker only requires the header to be present. sctp_process_param() then reads adaptation_ind beyond the declared parameter. When the malformed parameter is last in an INIT, the read starts at the receive skb tail, and the value is copied into the state cookie returned in the INIT ACK. This may disclose four receive-buffer tail bytes. Require the declared parameter length to match the fixed structure size and abort the association through the existing invalid parameter length path otherwise.

In the Linux kernel, the following vulnerability has been resolved: io_uring: preserve task restrictions across exec Per-task restrictions apply to all rings created by a task. Once installed, they should not be dropped across exec. For a task that has used io_uring, the exec cancellation path calls __io_uring_free(). This frees both the task context and the per-task restriction, so a ring created after exec is unrestricted. Split task context cleanup into io_uring_free_tctx(), and use it from the exec cancellation path. Keep __io_uring_free() for final task cleanup, where both the context and restriction are released.

In the Linux kernel, the following vulnerability has been resolved: power: supply: max17040: handle missing status supplier MAX17040 does not report charger state itself, so the driver forwards POWER_SUPPLY_PROP_STATUS to a supplier power supply. If no supplier is registered, power_supply_get_property_from_supplier() returns -ENODEV and leaves the output value untouched. max17040_get_property() currently ignores that error and returns success, so userspace can read an uninitialized status value from the battery power supply. This happens on systems that use the fuel gauge without a charger supplier relationship in firmware. Return POWER_SUPPLY_STATUS_UNKNOWN when no supplier provides STATUS, and propagate other supplier lookup errors.

In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix missing authorization check in KFD_IOC_DBG_TRAP_DISABLE Prevent unauthorized termination of active GPU debug sessions. Previously, users with /dev/kfd access could terminate another process's debug session without proper ownership or ptrace authorization. (cherry picked from commit 4db4c5ffd5585b72622ecf6ffedf2da258ee23f5)

In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic: Avoid double-deactivate of IRQs in the nested context In the nested state, the physical interrupt has already been deactivated through the HW bit in the LR. The extra deactivation would be harmless but can hit an errata case on AmpereOne, so avoid it here. On AmpereOne, deactivating a physical interrupt through ICC_DIR_EL1 or ICC_EOIR1_EL1 (depending on EOImode) which is not active, but is the highest priority pending interrupt causes the cpu to lose the interrupt pending state and also prevents the delivery of future interrupts.

In the Linux kernel, the following vulnerability has been resolved: mm: migrate_device: fix pte_pfn/pte_dirty called on non-present PTE pte_pfn() and pte_dirty() have undefined behaviour when called on a non-present PTE. In migrate_vma_collect_pmd(), these functions may be invoked on non-present entries (e.g., device-private entries), leading to potential crashes from pte_pfn() or incorrect dirty folio accounting from pte_dirty(). Fix both by guarding with pte_present() checks.

In the Linux kernel, the following vulnerability has been resolved: Bluetooth: SCO: give the socket its own sco_conn reference sco_conn_del() drops a reference it does not own. It takes one transient reference via sco_conn_hold_unless_zero() and releases it with the sco_conn_put() that follows sco_sock_hold(); the additional put in the !sk branch releases a second one: conn = sco_conn_hold_unless_zero(conn); ... sk = sco_sock_hold(conn); sco_conn_unlock(conn); sco_conn_put(conn); if (!sk) { sco_conn_put(conn); return; } When close() races the controller's Disconnection Complete, sco_chan_del() clears conn->sk and drops the socket's reference while sco_conn_del() is running. sco_conn_del() then sees sk == NULL, its own put drops the count to zero and frees the conn, and the second put writes to the freed kref: BUG: KASAN: slab-use-after-free in sco_conn_put.part.0+0x1a/0x190 Write of size 4 at addr ffff8881099dec74 by task kworker/u17:3/413 Workqueue: hci1 hci_rx_work Call Trace: sco_conn_put.part.0+0x1a/0x190 hci_disconn_complete_evt+0x1ee/0x3e0 hci_event_packet+0x54a/0x650 hci_rx_work+0x321/0x3d0 Allocated by task 413: sco_conn_add+0x72/0x1a0 sco_connect_cfm+0x88/0x670 Freed by task 413: sco_conn_del.isra.0+0x3f/0xf0 hci_disconn_complete_evt+0x1ee/0x3e0 refcount_t: underflow; use-after-free. The root cause is that the socket stores the connection without holding a reference of its own. __sco_chan_add() does: sco_pi(sk)->conn = conn; so the socket borrows whatever reference its caller happened to hold, and the callers paper over that with ad-hoc holds and puts. Give the socket a counted reference instead: __sco_chan_add() takes one and it is released together with the channel (sco_chan_del()) and in sco_sock_destruct(). With the socket holding its own reference, sco_conn_del() no longer needs the extra put and the redundant hold in sco_conn_ready() goes away. Making the socket own its reference means the connection is now actually freed on the error paths of sco_connect() where it used to leak, which in turn runs sco_conn_free() and its hci_conn_drop(conn->hcon). To keep the hci_conn accounting balanced, make that ownership explicit as well: sco_conn_add() consumes one hci_conn reference and the sco_conn owns it for its lifetime. sco_connect() hands over the reference returned by hci_connect_sco() and no longer drops it on the error paths; sco_connect_cfm(), which is not given a reference, takes one with hci_conn_hold() before handing it to sco_conn_add() (and drops it again if the allocation fails); and the explicit hci_conn_hold() in sco_conn_ready() is removed. Every reference then has a single, clear owner.

In the Linux kernel, the following vulnerability has been resolved: s390/dasd: Fix potential NULL pointer dereference dasd_release_space() checks the implementation of the is_ese() discipline function before calling it to determine if a given device is an ESE DASD. The current usage of the logical AND operator will lead to a NULL pointer dereference as the function is called even if the function pointer is NULL. Fix this by using the logical OR operator.